Suction Oil Guns
Hose Clamps
Brass Pipe Fittings
Tie rod, girder coupler, pressed coupler, sleeve coupler, toe board bracket, hex nut, locking pin, wheel bracket, cup lock system, drop head, universal jack, adjustable base jack, U-head jack, rapid clamp, joint pin, prop sleeve, base plate & prop plate, bottom cup, top cup, universal clamp, shuttering clamp, prop nut, wing nut, waller plate, ledger plate, flip lock pin, water stopper with adaptor.
CPU: Support LGA775 CPU, supports FSB 533/800/1066MHZ CPU Chipset: Intel 82945+82801GB, supports GMA950 graphics Memory: 2*240-pin DDR2 SDRAM Slots, Memory up to 2GB, Supports dual channel DDR3 533/667MHZ I/O interface: 6 x USB, compatible with USB 2.0, 1 x VGA port, 1 x RJ45 port, 1 x 3-in-1 Audio port Onboard Interface: 1 x 24-pin ATX Connector, 1 x 4-pin ATX 12V power connector, 1 x USB Connector, can support 2 x USB 2.0, 1 x F_AUDIO Connector, 1 x F_PANEL Connector, 1 x SPEAKER Connector, 1 x FAN Connector, 4 x Serial ATA Connector port, 1 x 40-pin IDE port. Integrated Sound: With 6-channel HD Audio Codec onboard, Provides front audio interface; provides front stereo mic interface. Integrated LAN: With 10/100 Mbps LAN onboard Expansion Slot: 1 x PCI Express x 16 slot, 1 x 120-pin PCI slot Dimension: Micro-ATX architecture (17 x 19 cm)
Specification æUTKALÆM.G.O Filling Machine - Model No. SAUD Drive Motor :- 0.5 H.P Crompton/NGEF Gear Box :- Utkal Type Pipe :- OM Steel No. of filling station :- 6 Tube Size of filling tube :- 8.2 Length of filling tube :- 3 mtr Filling speed :- 6 inch/min. Nozzle :- kanthal type Vibrator :- Electro magnetic per one meter for each vibrator Contactors :- LT/TC make contractors will be provided for each vibrator Bolts :- UNBRKO/TVS Rod/pipe guide :- rod guiders will be provided to keep the rod /pipe straight Clutch&brake :- pethe make Heater :- provide in hopper to heat the MGO Up/Down :- Motorized Automatic control panel :- Control filling machine Height (For 5mtr) :- (1.5mtr+1.5mtr+1mtr=4mtr) . Width :- 1200mm. Length :- 1500mm.
Hand-Embroidered Gold or Silver Bullion blazer crests of your golf club or tournament association logos, gold or silver bullion blazer crest Four hand-embroidered styles are available: 1. Magnetic clip that slides into the jacket pocket 2. separated magnets used for jackets without a pocket 3. pin-on through the jacket fabric 4. sew-on directly to the jacket
USMC Bullion-Thread Embroidered Blazer Pocket Patch with Velcro Backing, different backing styles are available, Velcro hooked backed crest is ready for any latched material or shadow box mounting. No safety pins to stick through the breast pocket of your expensive suit and hope they keep your cherished USMC Crest in place and perfectly positioned. Just add our leather pocket clip and it securely affixes the crest to the sport coat breast pocket in one easy snap..... as well simply sew on the pocket.
Hand-Embroidered Gold or Silver Bullion blazer crests of your Club, Tournament, Association, or Fashion Apparel Logos, These crests and Emblems are created individually hand-embroidered with bullion-based gold and silver copper wires. all the productions are custom-made to the client's own design and pattern. Hand-embroidered Crests styles available: 1. Magnetic clip that slides into jacket pocket 2. Separated magnets used for jackets without a pocket 3. pin-on through the jacket fabric sew-on directly to the jacket 4. Press on/Iron on applied by normal iron
Notebooks, school notebooks, soft bound, centre pinned, registers A4 registers, spiral registers, rough registers.
CPU: Support LGA775 CPU Chipset: Intel G41+82801GB, supports GMAX4500 graphics Memory: 2*240-pin DDR3 SDRAM Slots, Memory up to 8GB, Supports dual channel DDR3 1066/1333MHZ I/O interface: 1 x PS/2 keyboard port, 1 x PS/2 mouse port, 4 x USB, compatible with USB 2.0 for G41-P, 6 x USB, compatible with USB 2.0 for G41-U, 1 x VGA port, 1 x RJ45 port, 1 x 3-in-1 Audio port Onboard Interface: 1 x 24-pin ATX Connector, 1 x 4-pin ATX 12V power connector, 2 x USB Connector, can support 4 x USB 2.0, 1 x F_AUDIO Connector, 1 x F_PANEL Connector, 1 x SPEAKER Connector, 1 x FAN Connector, 4 x Serial SATA Connector port, 1 x 40-pin IDE port. Integrated Sound: With 6-channel HD Audio Codec onboard, Provides front audio interface; provides front stereo mic interface. Integrated LAN: With 10/100 Mbps LAN onboard Expansion Slot: 1 x PCI Express x 16 slot, 1 x 120-pin PCI slot Dimension: Micro-ATX architecture (16.8 x 21.2 cm)
Electrical Sockets Generally, we see 2-pin, 3-pin and 5-pin sockets in our homes and offices. The other thing that differentiates sockets is voltage capacity, i.e., the amount of current it can pass. In India, the three-pin plug is rated at 6A / 250V.
Hair Rubber Scrunchies For Girls /women ,different Sizes And Colors Can Be Made According To The Buyers Need.
Decorative laminate for wardrobe and furniture 1 mm thickness, Size -8ft x 4 ft
Designs and colors of the tiara can be made according to buyer requirements .
Unbreakable Varieties Of Hair Clutcher,various Designs According To Customer Needs.
Metal High Strength Tik Tak For Daily Use For Girls . Colours Can Be Chosen And Packing Can Be Changed According To The Order.
Zig Zag Hairband Is A Daily Use Product For Women Aswell As Men With Long Hair ,we Assure The Quality Of The Products Is Superior Than Any Other Factory .
CPU: Support 4th/5th Gen intel core CPUs (LGA1150) Chipset: Intel H81 Express Chipset. Memory: 2*240-pin DDR3 SDRAM Slots, Memory up to 16GB, Supports dual channel DDR3 1066/1333/1600/1866MHZ. I/O interface: 1 x PS/2 keyboard port, 1 x PS/2 mouse port, 2 x USB, compatible with USB 2.0 for H81-G335-P, 4 x USB, compatible with USB 2.0 for H81-G335-U, 2 x USB, compatible with USB 3.0, 1 x VGA port, 1 x HDMI port, 1 x RJ45 port, 1 x 3-in-1 Audio port. Onboard Interface: 1 x 24-pin ATX Connector, 1 x 4-pin ATX 12V power connector, 2 x USB Connector, can support 2 x USB 2.0, 1 x F_AUDIO Connector, 1 x F_PANEL Connector, 1 x SPEAKER Connector, 1 x FAN Connector, 2 x Serial SATA/6GB/S Connector port, 2 x Serial SATA/3GB/S Connector port, 1 x LPC DEBUG connector. Integrated Sound: With 6-channel HD Audio Codec onboard, Provides front audio interface; provides front stereo mic interface. Integrated LAN: With 10/100 Mbps LAN onboard Expansion Slot: 1 x PCI Express x 16 slots, 1 x 120-pin PCI slot Dimension: Micro-ATX architecture (17 x 19 cm)
CPU: Support I3/I5/I7 series CPU (LGA1155) Chipset: Intel H61 Express Chipset Memory: 2*240-pin DDR3 SDRAM Slots, Memory up to 16GB, Supports dual channel DDR3 1066/1333/1600MHZ I/O interface: 1 x PS/2 keyboard port, 1 x PS/2 mouse port, 4 x USB, compatible with USB 2.0 for H61-303-P, 6 x USB, compatible with USB 2.0 for H61-303-U, 1 x VGA port, 1 x HDMI port, 1 x RJ45 port, 1 x 3-in-1 Audio port Onboard Interface: 1 x 24-pin ATX Connector, 1 x 4-pin ATX 12V power connector, 2 x USB Connector, can support 4 x USB 2.0, 1 x F_AUDIO Connector, 1 x F_PANEL Connector, 1 x SPEAKER Connector, 1 x FAN Connector, 4 x Serial SATA Connector port, 1 x LPC�¬_ DEBUG connector. Integrated Sound: With 6-channel HD Audio Codec onboard, Provides front audio interface; provides front stereo mic interface. Integrated LAN: With 10/100 Mbps LAN onboard Expansion Slot: 1 x PCI Express x 16 slots, 1 x 120-pin PCI slot Dimension: Micro-ATX architecture (17 x 19 cm)