Urea 46%, also known as urea fertilizer, is a commonly used nitrogen fertilizer and animal feed additive in the agricultural industry. This white crystalline solid is highly soluble in water, making it easy to apply to crops. Urea 46% provides plants with an essential source of nitrogen, which is crucial for their growth and development. However, like any agricultural input, urea 46% has its pros and cons. In this blog, we will explore the composition, production process, and practical applications of urea 46%, as well as its potential drawbacks and best practices for farmers. By understanding the benefits and limitations of urea 46%, farmers can maximize its potential and optimize crop production while minimizing environmental impact.
Iron ores are the raw material used to make iron and steel. Iron ore production has significantly expanded in recent years, owing to increasing steel demands in developing countries, such as China. As the content of iron ore in deposits has deteriorated, low-grade iron ore has been processed. Iron ore concentrate is an output product from processed iron ores that have been milled (crush, grind, magnetic separation, flotation) to separate deleterious elements and produce a high-quality product. Sintering and pelletizing are economic and widely used agglomeration processes to prepare iron ore fines/iron concentrate for ironmaking use. The quality requirements of sinter and pellet, such as physical, chemical, and metallurgical specifications, depend on each ironmaking furnace, and those requirements influence the operation of the iron ore sintering and pelletizing plant. Researchers have usually focused on the effect of the chemical, physical, and mineralogical characteristics of iron ore on these steps and the consequences for sinter/pellet quality and sintering/pelletizing performance. The present Special Issue on â??Iron Concentrate Particlesâ?? will summarize the progress achieved in the last five years.
Pure sulfuric acid does not occur naturally due to its strong affinity to water vapor; it is hygroscopic and readily absorbs water vapor from the air.[6] Concentrated sulfuric acid is highly corrosive towards other materials, from rocks to metals, since it is an oxidant with powerful dehydrating properties. Phosphorus pentoxide is a notable exception in that it is not dehydrated by sulfuric acid but, to the contrary, dehydrates sulfuric acid to sulfur trioxide. Upon addition of sulfuric acid to water, a considerable amount of heat is released; thus, the reverse procedure of adding water to the acid should not be performed since the heat released may boil the solution, spraying droplets of hot acid during the process. Upon contact with body tissue, sulfuric acid can cause severe acidic chemical burns and even secondary thermal burns due to dehydration.[7][8] Dilute sulfuric acid is substantially less hazardous without the oxidative and dehydrating properties; however, it should still be handled with care for its acidity.
Our iron ore pellets and fines are made from magnetite and have high iron ore content â?? pellets at around 67 percent concentration and fines over 70 percent. This means they have lower impact on the environment than competing pellets and products such as sintered hematite fines. Using pellets instead of sinter (slightly larger pieces of iron ore) in customersâ?? pig iron processes saves emissions at steel plants. The high concentration of iron combined with the carefully tested and balanced additives in our pellets also result in lower emissions in customersâ?? ironmaking processes.
Prilled urea is a form of nitrogen-rich solid fertilizer that has the ability to dissolve quickly in water. Prilled urea is more commonly used today to resist breaking down when mixing with other fertilizer components like Potassium chloride. It is also known as ice melting or deicing urea since it can reduce ice efficiently, even at very low temperatures ( -6 â?¦C) .
A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.
A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.
A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom.[1][2][4] Billets are further processed via profile rolling and drawing. Final products include bar stock and wire.[3] Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.
Blessed with a team of dexterous professionals, our organization counted as leading Exporter, Distributor, Supplier and Trading Company of Sisal Fiber UG Grade in Nairobi, Nairobi, Kenya. 100% natural sisal fiber Sisal fiber is strong and pliable, wear-resisting, alkali-resisting, corrosion-resisting. Therefore, the sisal fiber rope can be applied in many fields like transportation, fishery, oil industry, metallurgy etc. Sisal fiber: Grade A Length: 110cm-130cm Moisture: 10%-13% Impurity: 0-2% max Color: cream white cream, Brown
Specifications: - Origin: Kenya - Moisture:14.5% max - Admixture:1%max - Imperfection:3%max - size:3-5mm - Quality:A Grade. - Shelf Life:2 Years
Grade : Sisal Fiber UG, SSUG, 3L, TOW Grade A Fiber type : Greige/Dyed Fiber size : 0.20 to 0.40mm diameter Fiber strength : 880 N Color : Natural Cream white, Brownish, Yellowish Length : 90cm-130cm Moisture : 10%-13% Purity : 98-99.5 % min Impurity : 0-3% max Texture : Eco-friendly, Fine finish, Smooth texture Place of origin : Kenya Packaging: Bales of 100kg/250kg in PVC Bags or Wooden Cases Minimum order : 20'' FCL (14 ton), 40'' FCL (28 ton)
Total nitrogen content by weight (on dry basis): minimum 46% Biuret content by weight: maximum 1.5% Particle size: Not less than 90% of the material shall pass through 4 mm IS sieve and be retained on 2 mm IS sieve. Not more than 5% shall be below 1 mm IS sieve Packing: Packed in 50 kg (dry) capacity woven polypropylene bags with polyethylene inner lining. 4% empty bags to be supplied at no extra cost Each bag to guarantee minimum product weight (net) as specified on the bag
Storage Type: COOL PLACE Specification: Moisture 5% Type: Cashew Nut Shelf Life: ONE YEAR Manufacturer: OWN PRODUCTION Ingredients: Fine Content: GOOD QUALITY Cultivation Type: Organic Processing Type: Roasted Style: Dried Packaging: Cotton Boxes Grade: WW320, WW450, WW210, WW240, WW180 Use: Ready to eat Place of Origin: Tanzania Grade Ww320
Copper Scrap Copper Wire And Pipe Scraps for Sale. Type: copper wire Chemical Formula: Cu M.P.: 1083.4 �°C Density: 8.82g/cm3 Specifications scrap copper wire 1.Scrap copper wire 2.Cu up to 99.99% 3.Competitive price+High quality 4.Excellent service 5.Small order is acceptable Copper Scrap CERTIFICATE OF ANALYSIS Item Standard Result Cu% 99.9 min 99.99 Sb% 0.002max 0.001 As % 0.002max 0.0006 Fe% 0.005 max 0.0012 Ni% 0.002 max 0.0008 Pb % 0.005max 0.0025 Sn% 0.002max 0.0007 S% 0.005max 0.003 O% 0.002max 0.001 Zn% 0.005max 0.002 P% 0.001max 0.0002
HMS Scrap /Heavy Melting Scrap (HMS1 / HMS2) /HMS1 HMS 1&2 Shredded HMS Bundle Steel Scrap Backed by huge industry knowledge, we are presenting a supreme quality range of HMS Scrap (1 & 2) to our highly valued consumers. These range of HMS Scrap are highly acclaimed for its high durability, tensile strength and exhibits superior resistant to adverse conditions. We test each and every product before release by various industrial parameters by our quality analyst. Client purchase these at reasonable rate. HMS 1/2 SCRAP / METAL SCRAP / HEAVY STEEL SCRAP / /Heavy Melting Steel Scrap Metals for sale. We can supply you HMS scraps, HMS 1, HMS 1/2, Used rails scraps. Chemical Composition: C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% We have Used Rails | HMS 1:2 ISRI CODE R50-R65 Composition C - 0.54-0.82%, SI - 0.18-0.40%, MN - 0.60-1.05%, S - 0.04% maximum P - 0.035% maximum AS: - 0.01% Maximum of Mass Share HMS is usually traded as a blend of 1 & 2, either a premium blend (80:20) or lower grade mixes (70:30) and (60:40). C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% Used clean rail, without slag, dross, trash, wood, plastic, oily parts, grease, alloy, prohibited goods, whole sets of machine and usable parts for machines, cast iron, motor turning blocks, engine blocks, war and explosive for armour plated materials, mud or wastes and maximum harmless impurities is less than 0.1%;
PRODUCT DETAILS 1.Aluminum UBC/Extrusion Scrap 6063/Wire Scrap 99.99 SPECIFICATIONS: AL % 99.7 S % 0.4 FE % 0.25 MAX MG % 0.55 MAX CU % 0.05 MAX ZN % 0.05 MAX TI % 0.02 MAX PACKING : COMPRESSED CUBE 0.5 M3 MAX Product Details: Aluminum UBC Scrap aluminum scrap cans Tape: according to the purity of aluminum, we can supply aluminum scrap with purity of aluminum 97%, 95%, 84%. Specification of Aluminum scrap 6063 Si : 0.2-0.6% Fe : 0.35% Cu : 0.1% Mn :0.1% Mg : 0.45-0.9% Cr :0.1% Zn :0.1%
Specification Of Raw Almond Nuts Flavor: Typical pleasant almond flavor, Mildly astringent. Color: Medium tan/brown. Sizes Available: 18-20, 20-22, 22-24, 23-25, 25-27, 27-30, 30-32, 32-34 Moisture: Max 6 % Purity: Around 99.00 % Broken almond: Max5 % Bad almond of obscure: 5% Aflatoxins: Max 5PPB E. coli: < 3/g Salmonella: Negative/375g Aflatoxin: < 20 ppb Calories: 645 kcal Calories from Fat: 485 kcal Total Fat: 53.9g Saturated Fat: 4.0g Total Carbohydrates: 17.8g Sugar: 4.5g Dietary Fiber: 10.5g Protein: 22.5g Packaging: 25lbs or 50lbs Plastic-lined cardboard cartons ==================== Type: ALMOND Cultivation Type: Organic Processing Type: Raw/Baked, Nuts Style: Dried Use: food Packaging: Bulk /Gift Packing/Vacuum Pack/As Request. Grade: TOP GRADE Product name: Almond Products Product type: Natural Dry Taste: Delicous Size: 23/25 27/30 30/33 33+ Color: Natural Colour Flavor: Almond Kernels Smell Almond Nuts: 100% Pure Quality: High-quality
Aluminum Extrusion 6063 Scrap Aluminum Extrusion 6063 Scrap. It is the most common alloy used for aluminum extrusions. Normally, Aluminium Extrusion 6063 Scrap shall consist of clean aluminum profile extrusions including window, shop fittings, irrigation tubes and door frames. However, it must be free of screws, iron components, plastics, rubber or other foreign materials. Chemical composition Silicon minimum 0.2%, maximum 0.6% by weight Iron no minimum, maximum 0.35% Copper no minimum, maximum 0.10% Manganese no minimum, maximum 0.10% Magnesium minimum 0.45%, maximum 0.95% Chromium no minimum, maximum 0.10% Zinc no minimum, maximum 0.10% Titanium no minimum, maximum 0.10% Other elements no more than 0.05% each, 0.15% total Aluminium ; Remainder
Specifications: Product Name: Pistachios nuts Cultivation Type: Common Nutritional Values Per 100 gr. Energy (kcal) 642,7 Protein (g) 21,45 Total fat (g) 55,65 Unsaturated fat (g) 48,25 Satured fat (g) 7,4 Cholestrol (g) 0 Carbonhydrate (g) 10,016 Cellulose (g) 7,7 Iron (mg) 0,378 Potassium (g) 0,66 Sodium (g) 0,13 Feature: NON-GMO No food addtives Good for eyesight. Produce process: Selecting--Roasting--Seasoning--Selecting&metal detection--Packaging Taste:Salty, Crispy Shelf Life:12 months
Copper Cathode: Purity: purity 99.99% Weight per Sheet:125kg Enough stock Copper Cathode Purity: purity 99.99%-99.97% min Weight per Sheet:125kg Copper Cathode , Cu=99.98% copper cathode Grade A Cu 99.97- 99.99 %
