Shaft length : S: 381mm (15") | L: 508mm (20") Starting system : Manual Weight : S: 24kg | L: 25kg Engine type : OHV Fuel delivery system : Carburetor No. of cylinders : 1 Displacement : 138cm3 Bore x Stroke : 60.4mm x 48mm Maximum output : 4.4kW Full throttle operating range : 4,750 - 5,750rpm Steering : Tiller Oil pan capacity : 0.7 litres Ignition system : Digital CDI Alternator : 12V 5A (optional) Engine mounting : Bushing type Trim method : Manual trim & tilt Gear ratio : 1.92:1 Gear shift : F-N-R Exhaust : Above prop hub exhaust Propeller selection (pitch) : 6 - 7" (Alloy) Fuel tank capacity : Integral 1L (remote connection) Fuel : minimum 91 (RON) octane DF 15 HP :- 4-stroke Shaft length : S: 381mm (15")| L: 508 mm (20") Starting system : Electric or manual Weight : MS: 44.0kg | ML: 45.0kg | ES: 48.0kg | EL: 49.0kg | PTL: 55.5kg Engine type : OHC 4-valve Fuel delivery system : Electronic fuel injection No. of cylinders : In-line 2 Displacement : 327cm3 Bore x Stroke : 60.4mm x 57mm Maximum output : 11.0kW Full throttle operating range : 5,000 - 6,000rpm Steering : Remote | Tiller Oil pan capacity : 1.0 litre Ignition system : Digital CDI Alternator : E: 12V 12A | M: 12V 6A (op.) Engine mounting : Shear mount Trim method : Manual trim & tilt | Power tilt Gear ratio : 2.08:1 Gear shift : F-N-R Exhaust : Through prop hub exhaust Propeller selection (pitch) : 7"- 12" (Alloy) Fuel tank capacity : Separate 12L Fuel ; minimum 91 (RON) octane DF 20 HP:- 4-stroke Shaft length : S: 381mm (15") | L: 508 mm (20") Starting system : Electric or manual Weight : MS: 44kg | ML: 45kg | ES: 48kg | EL: 49kg | PTS: 52.5kg | PTL: 54.5kg | PTH: 55.5kg Engine type : OHC 4-valve Fuel delivery system : Electronic fuel injection No. of cylinders : In-line 2 Displacement : 327cm3 Bore x Stroke : 60.4mm x 57mm Maximum output : 14.7 kW Full throttle operating range : 5,300 - 6,300rpm Steering : Remote | Tiller Oil pan capacity : 1.5 litres Ignition system : Digital CDI Alternator : E: 12V 12A | M: 12V 6A (op.) Engine mounting : Shear mount Trim method : Manual trim & tilt | Power tilt Gear ratio : 2.08:1 Gear shift : F-N-R Exhaust : Through prop hub exhaust Propeller selection (pitch) : 7"- 12" (Alloy) Fuel tank capacity : Separate 12L Fuel : minimum 91 (RON) octane DF 25 HP:- 4-stroke Recommended Transom Height (inches) : S:15" L:20" Starting System : Manual S /Electric S and L Weight LBS : Manual S: 136.6 / Electric S: 143 - Electric, Tiller, Power Trim and Tilt L: 163 Engine Type : SOHC 4-Valve Fuel Delivery System : Suzuki Battery-less Electronic Fuel Injection with Lean Burn Control No. Of Cylinders : 3 Piston Displacement inches (cc) : 29.8 (489) Bore X Stroke Inches (mm) : 2.80 x 2.68 () Maximum Output HP : 25 Operating Range (RPM : 5000 - 6000 Steering : Tiller/Remote Choke : N/A - Suzuki Electronic Fuel Injection Oil Pan Capacity quarts (liter) : 1.6 (1.5)
The wide range of steel pipe nipple offered by us is used as an extension to any pipe assembly. These are available in different diameters and thicknesses that meet the different application requirements of numerous industries. Our range is appreciated for quality features like robust construction, corrosion resistance, and accurate dimension. These are widely used across automotive, paper, cement, chemical, pharmaceuticals, and engineering related industries. In addition to this, our precision engineered range of steel pipe nipples is available in customized finishes as per the client’s demands. Pressure : 2000Lbs, 3000Lbs, 6000Lbs, 9000Lbs Specification : Elbow, Tee, Cross, Square plug, Hexgean Plug, Nipple, Cap, Coupling, Outlet for thread type & socket welding. Material : Carbon Steel, Stainless Steel Size Rate : from 1/8 to 6 Standard : DIN, ASME B 16.11, JIS Thread : ISO, DIN, NPT, BSPT Features : Durable High tensile strength Resistant to temperature Great finish Dimensionally accurate
The wide range of Plug offered by us is available in various sizes and shapes. These are manufacture using stainless steel and carbon steel and are mainly used to close the end of the pipes. The plugs are similar to cap but fitted inside the fittings and find applications in various industries.Features : High strength Corrosion resistance Durability Dimensionally accurate Pressure : 2000Lbs, 3000Lbs, 6000Lbs, 9000Lbs Specification : Elbow, Tee, Cross, Square plug, Hexgean Plug, Nipple, Cap, Coupling, Outlet for thread type & socket welding. Material : Carbon Steel, Stainless Steel Size Rate : from 1/8 to 6 Standard : DIN, ASME B 16.11, JIS Thread : ISO, DIN, NPT, BSPT Features : Durable High tensile strength Resistant to temperature Great finish Dimensionally accurate
Moringa Oleifera Leaves Powder: We are the manufacturers & exporters of dried moringa leaves, moringa leaves tea cut, moringa leaves powder, moringa leaves tablet, moringa leaves capsules, moringa seeds, moringa seeds powder, moringa oil, moringa dry flowers, fresh drumstick, drumstick pods, drumstick pods powder & moringa roots powder [seasonal] A nutritional supplement : 100% Natural & Herbal Powerful source of Vitamin A[10 times of Carrot], Vitamin B, Vitamin C[8 times of Orange], Calcium[4 times of Milk], Amino Acids, Anti- Oxidents, Iron, Protein & Potassium[4 times of Bananas] helps to enhance overall health system. Moringa is used for treating such widespread conditions as: Cancer, kidney stones Diabetes, anemia, epilepsy arthritis and other joint pain, such as rheumatism allergies and asthma constipation, stomach pains and and diarrhea stomach and intestinal ulcers or spasms chronic headaches heart problems, including high blood pressure fluid retention, low sex drive thyroid disorders bacterial, fungal, viral and parasitic infections
Base Oil & Lubricants) Group I - SN 150 / SN 500: Group I base oils are classified as less than 90 percent saturates, greater than 0.03 percent sulfur and with a viscosity-index range of 80 to 120. The temperature range for these oils is from 32 to 150 degrees F. Group I base oils are solvent-refined, which is a simpler refining process. This is why they are the cheapest base oils on the market. Group II base oils are defined as being more than 90 percent saturates, less than 0.03 percent sulfur and with a viscosity index of 80 to 120. They are often manufactured by hydrocracking, which is a more complex process than what is used for Group I base oils. Since all the hydrocarbon molecules of these oils are saturated, Group II base oils have better antioxidation properties. They also have a clearer color and cost more in comparison to Group I base oils. Still, Group II base oils are becoming very common on the market today and are priced very close to Group I oils. Group III base oils are greater than 90 percent saturates, less than 0.03 percent sulfur and have a viscosity index above 120. These oils are refined even more than Group II base oils and generally are severely hydrocracked (higher pressure and heat). This longer process is designed to achieve a purer base oil. Although made from crude oil, Group III base oils are sometimes described as synthesized hydrocarbons. Like Group II base oils, these oils are also becoming more prevalent. Group IV base oils are polyalphaolefins (PAOs). These synthetic base oils are made through a process called synthesizing. They have a much broader temperature range and are great for use in extreme cold conditions and high heat applications. Group V base oils are classified as all other base oils, including silicone, phosphate ester, polyalkylene glycol (PAG), polyolester, biolubes, etc. These base oils are at times mixed with other base stocks to enhance the oil’s properties. An example would be a PAO-based compressor oil that is mixed with a polyolester. Esters are common Group V base oils used in different lubricant formulations to improve the properties of the existing base oil. Ester oils can take more abuse at higher temperatures and will provide superior detergency compared to a PAO synthetic base oil, which in turn increases the hours of use.
We cater to various industries with our qualitative Sheets & Plates that are in huge demand in the market. We are well reckoned as one of the dominant Steel Sheets & Plates Exporters and Suppliers based in India. To match the various needs of the clients, our Sheets & Plates are available in various metals, sizes and grades.Utilization of finest quality raw materials in Carbon Steel Sheets & Plates assures high durability as well as strength. Easy to install, our Sheets & Plates provide long lasting trouble free performance without any maintenance. Stainless Steel : ASTM A 240, SA 240, AISI Type : 304, 304L, 304H, 310, 310S, 316, 316L, 316Ti, 317, 317L, 321, 321H Carbon Steel : ASTM A 515, A 516 Grade: 60, 70 B 2062 Alloy Steel : ASTM A 387, Class: I/II, Grade: 11, 22, 5, 9, 12, 1 Nickel Alloys : B162, B127, B463, B576, B168, B443 Copper Alloys : Aluminium, Copper, Brass & Gunmetal
We cater to various industries with our qualitative Sheets & Plates that are in huge demand in the market. We are well reckoned as one of the dominant Steel Sheets & Plates Exporters and Suppliers based in India. To match the various needs of the clients, our Sheets & Plates are available in various metals, sizes and grades.Utilization of finest quality raw materials in Carbon Steel Sheets & Plates assures high durability as well as strength. Easy to install, our Sheets & Plates provide long lasting trouble free performance without any maintenance. Stainless Steel : ASTM A 240, SA 240, AISI Type :304, 304L, 304H, 310, 310S, 316, 316L, 316Ti, 317, 317L, 321, 321H Carbon Steel : ASTM A 515, A 516 Grade: 60, 70 B 2062 Alloy Steel : ASTM A 387, Class: I/II, Grade: 11, 22, 5, 9, 12, 1 Nickel Alloys :B162, B127, B463, B576, B168, B443 Copper Alloys :Aluminium, Copper, Brass & Gunmetal
Bitumen (Penetration / Emulsion / Cutback): Product Description: Types of Bitumen based on their applications: Based on their applications, bitumens can be divided into two groups: 1. road construction or thin bitumen 2. building bitumen (roof insulator) or hard bitumen Price of product ( USD price or FOB price) : About 90% of the produced bitumen is used in road construction activities and 10% of it is used for insulation applications. Key Specifications/Special Features : Penetration Grade : ASTM D 946 - 40/50, 60/70, 80/100 BS EN 12591 - 35/50, 50/70, 70/100 Viscosity Grade : ASTM D3381-09 - AC10, AC20, AC30, AC40 IS 73:2013 - VG10, VG20, VG30, VG 40 Performance Grade : PG bitumen is bitumen which is graded based on its performance at different temperatures. Natural Bitumen or Gilsonite : Gilsonite in mass is a shiny, black substance, brittle and can be easily crushed into a dark brown powder. Bitumen Emulsion : Cationic Rapid Setting - CRS-1, CRS-2 Cationic Slow Setting - CSS-1, CSS-1h Cutback Bitumen : Slow Curing - SC-70, SC-250, SC-800, SC-3000 Medium Curing - MC-30, MC-70, MC-250, MC-800, MC-3000 Rapid Curing - RC-70, RC-250, RC-800, RC-3000
Seafood, frozen vannamei shrimps, pud, pd, tale on tale off, sardine and hilsa fish, rice, palm oil and sunflower oil.Exporter and importer
Rice bran,wheat bran, cloves, black peppers, cardamom, sunflower oil, soybeans, groundnuts,dry gingers, white maize,cinnamon and white maize..
Starch, corn starch, maize starch, wheat starch, potato starch, tapioca starch, oil well drilling starch, drilling starch, modified starch, native starch, rice starch, pea starch, bean starch.
Edible oil, sunflower oil,blended oil, corn oil , palm oil.
Industrial salt, food grade salt, edible salt, iodized salt, soda ash.
Steel 55 gallon barrels, tiles, and ceramic, arc furnace slag, iranian saffron, first class almond kernels, shisha charcoal.Trade services, exports and imports
Wheat, sugar, cooking oil, olive oil, honey, flour, bitumen, jet fuel, crude oil, meat, chicken.
Fruits and vegetables , rice..Transportation and shipping
Cow Meat.
EAF Dust.Export
Iranian mazafati dates , khallas, faradh , khanezi , berni , sayer , zahedi , ajwa dates , dates products dates syrup , dates paste, dates cream , dates sauce , dates sugar , dates coffee dry dates (chuwara).
food grain commodities such as milling wheat, barley, corn, soybean, rape seeds wheat flour sunflower seed & oil chickpeas. also, we can supply animal feed grains such as feed corn, feed barley, feed wheat..