Orifice flanges are used instead of the standard pipe flanges when orifice plate or flow nozzle is used. In other words, orifice flanges are used with orifice meters. The basic purpose for this is to measuring the flow rate of either gases or liquids in the respective pipeline. These flanges are used in various industrial applications and are available in various sizes and materials. All orifice flange units are supplied with the plate, pressure connection holes, and jack screws.
LAP Joint Flanges are primarily employed with lap joint stubs, the combined initial cost of the two items being approximately one-third higher than that of comparable welding neck flanges. Their pressure-holding ability is little, if any, better than that of slip-on flanges and the fatigue life of the assembly is only one-tenth that of welding neck flanges. The chief use of lap joint flanges in carbon or low alloy steel piping systems is in services necessitating frequent dismantling for inspection and cleaning and where the ability to swivel flanges and to align bolt holes materially simplifies the erection of large diameter or unusually stiff piping. Their use at points where severe bending stress occurs should be avoided.
A wide range of end cap forged fittings that are engineered to precision at our vendor’s end. These fittings are made up of nickel alloy and are hot dip galvanized for increasing its service life. The testimony of quality of these fittings is mill test certificate as per EN 10204 / 3.1B, which can be provided with these fittings on the request of our clients.
A Threaded Flange is usually confined to a special application. The main benefit of a Threaded Flange is that it can be assembled without welding which makes it perfect for extremely high pressure services. Threaded Flange is unsuited for conditions involving temperature or bending stresses of any magnitude. Particularly under cyclic conditions where leakage through the threads may occur in relatively few cycles of heating or stress.
The wide range of steel pipe nipple offered by us is used as an extension to any pipe assembly. These are available in different diameters and thicknesses that meet the different application requirements of numerous industries. Our range is appreciated for quality features like robust construction, corrosion resistance, and accurate dimension. These are widely used across automotive, paper, cement, chemical, pharmaceuticals, and engineering related industries. In addition to this, our precision engineered range of steel pipe nipples is available in customized finishes as per the client’s demands. Pressure : 2000Lbs, 3000Lbs, 6000Lbs, 9000Lbs Specification : Elbow, Tee, Cross, Square plug, Hexgean Plug, Nipple, Cap, Coupling, Outlet for thread type & socket welding. Material : Carbon Steel, Stainless Steel Size Rate : from 1/8 to 6 Standard : DIN, ASME B 16.11, JIS Thread : ISO, DIN, NPT, BSPT Features : Durable High tensile strength Resistant to temperature Great finish Dimensionally accurate
With the help of our proficient team, we are engaged in offering a wide range of couplings to our valued clients. These are available in different grades and sizes to meet the demands of automotive, paper & print and allied engineering industries. Our range of couplings is highly durable, resistant to corrosion and provides high end functionality.Features: Dimensional accuracy High efficiency Corrosion resistance Durable Excellent finish
We supply a quality range of Cross Fittings, which is widely used in various industries for torque free sealing in any piping or tubing connection. These are well design from stainless steel and using latest technology and is been procured from reliable vendors. Our range of product is highly appreciated for its excellent finishes, superior quality, flawless performance, easy installation and removal. We offer these to our clients at competitive prices and various specific treading and sizes. Specifications: Name : L/R & S/R ELBOW, TEE, CONCENTRIC AND ECCENTRIC REDUCERS, REDUCING ELBOW & TEE, CROSS, CAPS, etc. Standard : SO, ANSI/ASME, MSS, JIS, DIN, BS etc. Material : CARBON STEEL & STAINLESS STEEL Size Range :1/248 Thickness :STD, XS, XXS.SCH10, 20, 30, 40, 60, 80, 160
We hold expertise in offering a vast range of Reducing Tee in different sizes and thickness to suit the requirements of clients. These are manufactured using stainless steel, carbons steel, alloy steel, monel, nickel, inconel, hastelloy, copper, brass and titanium. Our range finds applications in various industries and conforms to the international quality standards. Features : Long service life Dimensionally accurate High strength Corrosion Resistance Specifications: Name : L/R & S/R ELBOW, TEE, CONCENTRIC AND ECCENTRIC REDUCERS, REDUCING ELBOW & TEE, CROSS, CAPS, etc. Standard : SO, ANSI/ASME, MSS, JIS, DIN, BS etc. Material : CARBON STEEL & STAINLESS STEEL Size Range :1/248 Thickness :STD, XS, XXS.SCH10, 20, 30, 40, 60, 80, 160
We are engaged in manufacturing and exporting of screwed fittings, which have gained appreciation for durability and trouble free performance. Offered in host of sizes, material grades and thickness, these are extensively used in several industries for corrosion resistance and excellent finish. We also customize our range as per the requirements of our customers. The Screwed Fittings manufactured at our units is masterpiece in true sense. Its rugged construction has made us one the most accountable Manufacturers & Suppliers of Stainless Steel Screwed Fittings all over the world.. 150L, BS, NPT, DIN Threaded Fittings, All fitting dimensions conform to ANSI B 16.3, Material per ASTM A351 CF8[304] & CF8M, threads conform to ANSI B 2.1
We are engaged in manufacturing and exporting of screwed fittings, which have gained appreciation for durability and trouble free performance. Offered in host of sizes, material grades and thickness, these are extensively used in several industries for corrosion resistance and excellent finish. We also customize our range as per the requirements of our customers. The Screwed Fittings manufactured at our units is masterpiece in true sense. Its rugged construction has made us one the most accountable Manufacturers & Suppliers of Stainless Steel Screwed Fittings all over the world.. 150L, BS, NPT, DIN Threaded Fittings, All fitting dimensions conform to ANSI B 16.3, Material per ASTM A351 CF8[304] & CF8M, threads conform to ANSI B 2.1
We cater to various industries with our qualitative Sheets & Plates that are in huge demand in the market. We are well reckoned as one of the dominant Steel Sheets & Plates Exporters and Suppliers based in India. To match the various needs of the clients, our Sheets & Plates are available in various metals, sizes and grades.Utilization of finest quality raw materials in Carbon Steel Sheets & Plates assures high durability as well as strength. Easy to install, our Sheets & Plates provide long lasting trouble free performance without any maintenance. Stainless Steel : ASTM A 240, SA 240, AISI Type : 304, 304L, 304H, 310, 310S, 316, 316L, 316Ti, 317, 317L, 321, 321H Carbon Steel : ASTM A 515, A 516 Grade: 60, 70 B 2062 Alloy Steel : ASTM A 387, Class: I/II, Grade: 11, 22, 5, 9, 12, 1 Nickel Alloys : B162, B127, B463, B576, B168, B443 Copper Alloys : Aluminium, Copper, Brass & Gunmetal
Bars : We are one of the leading manufacturers of Bars that are manufactured using high grade raw material such as steel procured from reliable vendors. These are offered in various shapes and sizes and can be further customized as per the specification given by our clients. Our range is widely applied in industries such as construction, railways and automotive. It includes stainless steel bars, carbon Steel bars, Alloy Steel bars, steel round bars, hex bars, wire rod in black and bright finish. Stainless Steel :ASTM A 409, A 182, A276 Grade: 304, 304L, 304, 304H, 316, 316L, 316Ti, 321, 321H, 317, 317L, 310, 310S Carbon Steel :A105, ISO 2062 Alloy Steel :A182, Gr. F1, F2, F11, F22, F5, F9, F91 Nickel Alloys :B162, B127, B463, B576, B168, B443 Copper Alloys :Aluminium, Copper, Brass & Gunmetal Specifications : ASTM, ASME, AISI, AMS, AFNOR, QQS, B.S, JIS, DIN, MILS and NACE.
We are pleased to introduce ourselves as a leading manufacturers, Exporter, Importer, of Stainlees steel in all grades like 201, 301, 304, 310, 316 (as per Customer’s Requirement). In as below shapes and sizes. We request you to kindly register our name in your list of approved suppliers and favour us with your valued inquiries.We offer a range of stainless steel pipes and tubes, which are used for various purposes like slurries, mud, gas, liquid, corrosive substances, chemicals and others. Manufactured as per the international quality and safety standards, our SS pipes and tubes are corrosion resistant, durable and long lasting.We have the ability to customize products as per clients’ specifications. Stainless Steel :ASTM A 312, A 213, A 213, A 249, A 269, A 358, A 240 » Type :202, 304, 304L, 304, 304H, 316, 316L, 316Ti, 321, 321H, 317, 317L, 310, 310S, 409, 410, 420, 430 etc » Carbon Steel :ASTM A 106, A 53, API A 5L Gr A, B, C, ASTM A 333, Gr 1 to 6 (IBR & NON IBR) » Alloy Steel :ASTM A 335, GR P1, P2, P5, P9, P11, P22, P91 » Nickel Alloys :Hastelloy, 904, Titanium etc. » Copper Alloys :Aluminium, Copper, Brass & Gunmetal » Types :Round, Square Rectangular. » Size :Seamless : Upto 24NB Welded : 1/2NB to 60NB
We cater to various industries with our qualitative Sheets & Plates that are in huge demand in the market. We are well reckoned as one of the dominant Steel Sheets & Plates Exporters and Suppliers based in India. To match the various needs of the clients, our Sheets & Plates are available in various metals, sizes and grades.Utilization of finest quality raw materials in Carbon Steel Sheets & Plates assures high durability as well as strength. Easy to install, our Sheets & Plates provide long lasting trouble free performance without any maintenance. Stainless Steel : ASTM A 240, SA 240, AISI Type :304, 304L, 304H, 310, 310S, 316, 316L, 316Ti, 317, 317L, 321, 321H Carbon Steel : ASTM A 515, A 516 Grade: 60, 70 B 2062 Alloy Steel : ASTM A 387, Class: I/II, Grade: 11, 22, 5, 9, 12, 1 Nickel Alloys :B162, B127, B463, B576, B168, B443 Copper Alloys :Aluminium, Copper, Brass & Gunmetal
Our range of stainless steel ring joint flanges is highly appreciated for strength, durability, reliability, corrosion resistance and close tolerances. These stainless steel ring joint flanges conform to various Indian and international quality standards. Used in a number of industries, these stainless steel ring joint flanges are supplied in various dimensional specifications.
We are supplying a comprehensive range of superior quality Cross Tee Fittings at affordable prices. Used in industries like construction works, oil and gas sector, chemical units and automotive industry among others, our products are known for their high functionality, corrosion resistance, sturdy designs, durability and robust construction. These products can be customized according to the specifications provided by the clients. Pressure : 2000Lbs, 3000Lbs, 6000Lbs, 9000Lbs Specification : Elbow, Tee, Cross, Square plug, Hexgean Plug, Nipple, Cap, Coupling, Outlet for thread type & socket welding. Material : Carbon Steel, Stainless Steel Size Rate : from 1/8 to 6 Standard : DIN, ASME B 16.11, JIS Thread : ISO, DIN, NPT, BSPT Features: Durable High tensile strength Resistant to temperature Great finish Dimensionally accurate
The wide range of Plug offered by us is available in various sizes and shapes. These are manufacture using stainless steel and carbon steel and are mainly used to close the end of the pipes. The plugs are similar to cap but fitted inside the fittings and find applications in various industries.Features : High strength Corrosion resistance Durability Dimensionally accurate Pressure : 2000Lbs, 3000Lbs, 6000Lbs, 9000Lbs Specification : Elbow, Tee, Cross, Square plug, Hexgean Plug, Nipple, Cap, Coupling, Outlet for thread type & socket welding. Material : Carbon Steel, Stainless Steel Size Rate : from 1/8 to 6 Standard : DIN, ASME B 16.11, JIS Thread : ISO, DIN, NPT, BSPT Features : Durable High tensile strength Resistant to temperature Great finish Dimensionally accurate
We are involved in offering wide range of Reducing Elbow, which is used for joining tubes and pipes. These are sourced from certified manufacturer and are made with high quality stainless steel. Our clients can avail these from us in variety of specific sizes, grades, threading and pressure ratings. These are well tested on various parameters before making its final delivery to our respected customers. Specifications: Name :L/R & S/R ELBOW, TEE, CONCENTRIC AND ECCENTRIC REDUCERS, REDUCING ELBOW & TEE, CROSS, CAPS, etc. Standard :ISO, ANSI/ASME, MSS, JIS, DIN, BS etc. Material :CARBON STEEL & STAINLESS STEEL Size Range :1/2-48 Thickness :STD, XS, XXS.SCH10, 20, 30, 40, 60, 80, 160
We are offering our clients with concentric / eccentric reducers that are used in petrochemical, power, nuclear and electronic industries. Known for their close tolerances, these stainless steel concentric and eccentric reducers are designed with precise configurations. These reducers are ideal for critical applications that involve high pressure, impulse, vibration and temperature. Specifications: Name : L/R & S/R ELBOW, TEE, CONCENTRIC AND ECCENTRIC REDUCERS, REDUCING ELBOW & TEE, CROSS, CAPS, etc. Standard : ISO, ANSI/ASME, MSS, JIS, DIN, BS etc. Material : CARBON STEEL & STAINLESS STEEL Size Range : 1/2 -48 Thickness : STD, XS, XXS.SCH10, 20, 30, 40, 60, 80, 160
Flanges, forged fittings, buttweld fittings, screwed fittings, industrial fasteners, bar rod, pipes and tubes, sheets and plates, engineering products., trailer and truck tyres (315 & 12/24), guard rail, PVC cones and PVC barriers, industrial machinery, Stainless Steel pipe , tube, bar, rod, sheet, plates.
