Quality cotton yarn Ring spun ne 10 to 60 (carded or combed) Oe yarn ne 5 to 20 carded Pc, pv, viscose, polyester yarn ne 20 to 60. Carton cotton yarn pkg 24x1.89kg Carton synthetic yarn pkg 16 x 3.125kg
100% cotton yarn waste in white colour with corse count between 20s to 40s derived from ring spinning cotton mills Packing in full press bales weighing 160 kg average per bale covered with cloth cover
Hydraulic spares Our parent comanpy is a leading manufacturer of hydraulic spares like pipes & fittings, valves, pipe clamps, hoses, flanges, oil seals , o rings, nut bolts, & other tailor made spares we make, we also entertain custom made items as per desired by our customers. As per products specification
We can supply 100% carded cotton unwaxed for weaving with very good quality for airjet looms. Packing : - Carton packing (neutral) Cone weight : - 1.89 kgs/cone No. Of cones/ carton: - 24 Net weight : - 45.36 Cartons/40’ hc fcl :- 430 cartons = 19504.80 kgs
Stainless Steel: ASTM A182 F304/304L/ 304H/316/ 316L/ 317/ 317L/ 321/ 310/ 347/ 904L etc. Carbon Steel: ASTM A105/A694/F42/46/52/56/60/65/70/A350 LF3/A350 LF2, etc. Alloy Steel: ASTM A182 F1/ F5/ F9/ F11/ F22/F91 etc. Others: Monel, Nickel, Inconel, Hastalloy, Copper, Brass, Bronze, Titanium, Tantalum, Bismuth, Aluminium, High Speed Steel, Zinc, Lead, etc. Types: Weld neck, Slip-on, Blind, Socket Weld, Lap Joint, Spectacles, Ring. Joint, Long Weld neck, Deck Flange, etc. Size: 1/2 NB TO 24 NB. Class: 150#, 300#, 400#, 600#, 900#, 1500# & 2500.
With the valuable assistance of skilled team of professionals, we are offering an extensive range of high quality SS 316 Sheets. We have a team of highly skilled and experience procurements agents that source only quality oriented products from vendorâ??s end. We ensure our customers that all our products are precisely tested against various quality parameters at our in-house testing unit. Highly used in various industries and domestic sectors, these are offered at industry competent prices. Features: High tensile strength Long service life Resistant against corrosion Highly machinable Very strong and tough Can be hardened by heat treatment Magnetic RANGE : 0.4 MM TO 150 MM THICKNESS IN SHEET, PlATE & COILS.TYPE : COIL, Foil, ROLL, PLAIN SHEET, PERFORATED SHEET, CHEQUERED PLATE, STRIP, FLANT, BLANK(CIRCLE),RING(FLANGE)
Stainless Steel: ASTM A182 F304/304L/ 304H/316/ 316L/ 317/ 317L/ 321/ 310/ 347/ 904L etc. Carbon Steel: ASTM A105/A694/F42/46/52/56/60/65/70/A350 LF3/A350 LF2, etc. Alloy Steel: ASTM A182 F1/ F5/ F9/ F11/ F22/F91 etc. Others: Monel, Nickel, Inconel, Hastalloy, Copper, Brass, Bronze, Titanium, Tantalum, Bismuth, Aluminium, High Speed Steel, Zinc, Lead, etc. Types: Weld neck, Slip-on, Blind, Socket Weld, Lap Joint, Spectacles, Ring. Joint, Long Weld neck, Deck Flange, etc. Size: 1/2 NB TO 24 NB. Class: 150#, 300#, 400#, 600#, 900#, 1500# & 2500.
We are one of the most trusted manufacturer and supplier of copper fittings and flanges in India. We offer wide range of copper fittings comprises of copper flanges, copper pipe fittings, copper tube fittings and copper forged fittings which provide an economic and efficient method of changing directions in a wide spectrum of domestic and commercial applications ranging from air conditioning, refrigeration, heating, fluid distribution, air pressure lines and plumbing etc. Our fittings have no rough surfaces, present a neat appearance, heat more rapidly, and provide better flexibility to the installer to install and join the copper tube at appropriate place. Grade: â?¢ ASTM / ASME SB 61 UNS NO. C 92200 â?¢ ASTM / ASME SB 62 UNS NO. C 83600 â?¢ ASTM / ASME SB 151 UNS NO. 70600, 71500, C 70600 (cu-ni-90/10), C 71500 (cu-ni-70/30), â?¢ ASTM / ASME SB 152 UNS NO. C 10100, C 10200, C 10300, C 10800, C 12000 & C 12200. Specifications: Fittings: (butt weld, socketweld & threaded) 45 deg elbow, 45 deg long bend, 90 deg elbow, 90 deg long bend, 180 deg u bend, concentric reducer, eccentric reducer, equal tee, unequal tee, end cap / pipe cap, union, nipple, swage nipple, full & half coupling, cross, plug, bush, etc.Flanges: Slip-On (SORF), Blind (BLRF), Socket weld (SWRF), Weldneck (WNRF), Screwed (SERF), Lapped Joint (LJFF), Weldneck Ring Joint (WNRTJ), Long Weld Neck, Orifice, Spectacle Blind, Ring Joint, Threaded, etc. Fittings: 15 mm NB to 600 NB in schedule 5, 10, 20, 30, 40, 80, etc Flanges: 15 mm NB to 600 mm NB in 150#, 300#, 600#, 900, 1200#, Table D, Table E, Table F, Table G Test Certificate: MTC, TC from government approved Laboratory under Third Party Inspection.
These are available for pressure applications from 63mm to 315mm O.D. having pressure ratings 4, 6 & 10kgf/cm2 with Elastomeric Sealing Rings as per IS:4985-2000. These pipes are used for Agriculture, Irrigation Schemes, Water istribution Systems. Saves Pipe Line commissioning time, as no Solvent Cement is required. Main advantage v can absorb linear expansion & contraction.
We offer various types of Inconel Flanges that are provided in ANSI, DIN, JIS, BS and ASME standards. These Inconel flanges are available in following sizes and specifications. â?¢ Production standard: ANSI/ASME B16.5, ANSI B16.47â?¦ API, DIN, JIS, BS â?¢ Production size: 1/2 inch â?? 48 inch (15mm â?? 1200mm) â?¢ Grades: o ASTM / ASME UNS 6600 Inconel 600 o ASTM / ASME UNS 6601 Inconel 601 o ASTM / ASME UNS 6625 Inconel 625 o ASTM / ASME UNS 7718 Inconel 718 o ASTM / ASME UNS 7751 Inconel X-750 o ASTM / ASME UNS 8800 Inconel 800 o ASTM / ASME UNS 8810/11 INCOLOY 800H o ASTM / ASME UNS 8825 INCOLOY 825 Range: Weld Neck, Slip On, Blind, Socket Weld, Lap Joint, Spectacles, Ring Joint, Orifice, Long Weld Neck, Deck Flange, etc Class: 150#, 300#, 400#, 600#, 900#, 1500# & 2500#
* Ring spun cotton yarn * Soft Feel & Finish * Unique texture which gives added absorbency. * Double stitched * Dobby Weave * 400-450 GSM * Sizes: Bath Sheet/Bath/Hand/ Wash
* High Quality ring spun cotton yarn * Soft Feel & Finish * Strong & durable * Clubbed with polyester insert in body results in a beautiful looking towel. * Attractive designs & color combinations. * Piece dyed Dobby * 400-450 GSM * Sizes: Bath Sheet/Bath/Hand/ Wash
Hotmelt Adhesive - carton closing , Paper bags handle making Versatile EVA based hotmelt for variety of substrates in End of line Packaging. Product Features - Suitable to paper to paper/Laminated substrate/Aqueous Varnished Surface - Can be used for Warp around Case Sealing application - Good hot tack with fast setting product - Clean cut-off from the nozzle - Good Thermal Stability Technical Specification Appearance: Light Yellow Form: Chiklets Melt Viscosity at 150 C by 1800- 3500 cps Brookfield Thermoset Softening Point: 95 ±5 (by Ring and Ball method) TYPE
"Hotmelt Adhesive - carton closing - Non Laminated Cartons" EVA based low viscous hotmelt for Carton Sealing. Product Features - Suitable to paper-to-paper substrate either in grey board, white board, non-varnished surface - Mostly used in mono carton flap sealing - Fast setting product - Good Thermal Stability Technical Specification Appearance: Light Yellow Form: Chiklets Melt Viscosity at 150 C by 800 1600 cps Brookfield Thermoset Softening Point 105 ±5 (by Ring and Ball method) TYPE
Dimensions ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 Pressure Rating Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS Pressure Calculation 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Flange Connect Type/ Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove Flange Size Chart 1/2â?³ (15 NB) to 48â?³ (1200NB) DN10~DN5000 DIN Flanges DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 Table D, E, F, H Test Certificates EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc Flange Form Slip On Flanges, Socket Weld Flanges, Forged Flanges, Blind Flanges, Welding Neck Flange, Ring Type Joint Flange, Spectacle Blind Flange, Reducing Flange, Threaded / Screwed Flange, Tongue and Groove Flange, Long Weld Neck Flange, Plate Flange, ASME B16.5 Flange
Solvent C-9 CAS Number 64742-95-6 Formula C9H12 Aromatic hydrocarbons are a series of organic molecules that form flat ring-shaped bonds. Aromatic hydrocarbon C9 resins are conventionally named because it is defined by the number of carbon monomers in the chemical. C9 have a distinctive aromatic odour and a typical Gardner colour of 6- 10 (dark yellow to dark brown). It is insoluble in water, low alcohols and ketones, however are soluble in aliphatic hydrocarbons and chlorinated hydrocarbon solvents. SPECIFICATION Aromatic Content 99.56 %wt Benzene < 10 ppm wt Non-Aromatics 0.44 %wt Acidity No Free Acid Copper Strip Corrosion Pass 1A APHA Color 3 Initial Boiling Point 164.1C Dry Point 177.2C Specific Gravity @ 15.6/15.6C 0.8763C Density at 15C (in Vacuum) 0.8759g/mL Density at 15C (in Air) 0.8748g/mL Density at 30C (in Air) 0.8628g/mL Density at 30C (in Vacuum) 0.8639g/mL Appearance Colorless, Clear, Free of Foreign Matter Total Sulfur 0.1 ppm wt MAJOR USE: In adhesives, printing inks, sealants, polychoroprene rubber, concrete curing compounds, anti-drying agents and paints. It has a good compatibility with SBR, SIS, SEBS and SEPS and can be used as a pressure sensitive adhesive, hot-melt adhesive and synthetic rubber. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
We, at Global Steel, produce a lot of accessories for instrumentation that are made from stainless steel namely Instrumentation Tubes, Syphon Tube, Flushing Ring, Tube Clamp, and many more. For all tubing connections, Stainless Steel Instrumentation Tube Fittings provide leak-proof, torque-free sealing. Instrumentation, process, pneumatic, hydraulic, gas, and other tubing structures are all protected against potentially costly and dangerous leaks. Stainless steel tube fittings are utilized in a variety of applications, including oil and gas installations, steam and gas turbines, aerospace, defense, power generation, chemical processing, petrochemical, alternative fuels, shipbuilding, and medical equipment. These stainless steel instrumentation fittings are available in a number of shapes and grades, with SS 304 Instrumentation Tube Fittings and SS 316 Instrumentation Tube Fittings being the most popular. A Stainless Steel Flushing Ring is made from bar material. It comes in a variety of ASME B16.5 flange diameters. The SS Flushing Ring comes in a range of materials. SS Flushing Rings are commonly used in the following applications: Oil and Gas Refineries, Chemical and Petrochemical Refineries, Water and Wastewater Refineries, NACE compliant processes, Biogas and Diesel Refineries. The Stainless Steel Snubber and Gauge Cock is a device that smooths out pressure variations caused by reciprocating pumps, which are widely employed to provide the high pressures needed for waterjet cutting. Global Steel manufactures its goods according to worldwide production standards, ensuring consistent quality across the board and making things using top-class machinery that ensures durability. We have combined our expert labor and years of knowledge to create goods with incredible usability. We make certain that each of the products we develop is thoroughly tested before being shipped.
Standards ASTM A182 / ASME SA182 Dimensions ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. Standard ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc Size 1/2 (15 NB) to 48 (1200NB) Class / Pressure 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. Flange Face Type Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Standards ASTM A182 / ASME SA182 Dimensions ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. Standard ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc Size 1/2 (15 NB) to 48 (1200NB) Class / Pressure 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. Flange Face Type Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Standards ASTM B564 / ASME SB564 Dimensions ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. Standard ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc Size 1/2 (15 NB) to 48 (1200NB) Class / Pressure 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. Flange Face Type Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)