Granular Sulphur in Bulk, FCA in South Yoloten city , with the price of 40 $ MT. We have ability to arrange the logistics and supply to any country with CIF conditions. The payment condition is by prepayment (preferably) or SBLC / DLC / LC (needs be discussed). The product is of Turkmenistan origin and we are able supply of the Sulphur till 50 000 MT monthly. Sulfur is one of the most important agricultural and industrial raw materials Sulphur is the primary source in the production of sulphuric acid, the worldâ??s most widely used chemical. Sulphuric acid is an essential intermediate in many processes in the chemical and manufacturing industries. Sulphuric acid also is used by the fertilizer industry to manufacture primarily phosphates, nitrogen, potassium, and sulphate fertilizers.
Granular Sulphur in 1000kg PP Abbas port price of 99 $ MT. We have ability to arrange the logistics and supply to any country with CIF conditions. The payment condition is by prepayment (preferably) or SBLC / DLC / LC (needs be discussed). The product is of Turkmenistan origin and we are able supply of the Sulphur till 50 000 MT monthly. Sulphur is the primary source in the production of sulphuric acid, the worldâ??s most widely used chemical. Sulphuric acid is an essential intermediate in many processes in the chemical and manufacturing industries. Sulphuric acid also is used by the fertilizer industry to manufacture primarily phosphates, nitrogen, potassium, and sulphate fertilizers.
signed to transmit / receive data via radio channel at a speed of up to 9600 bit / s in the frequency range (2410-2465) mhz with the transmitter output power up to 10 mw. If cable routing between devices (which usually are using wired communication channels for data exchange) is impossible, then it is necessary to look for other means of communication, other than wired. Wireless transmission of data between devices is one of possible solutions for this problem. Wcd is a variation of radio extenders for communication lines using for communication interfaces rs-232 and rs-485. For more information please visit our website www.Technotrade.Ua
Fuel card management system for petrol stations is intended for managment and account over use of fuel cards (fleet cards) as a payment cards for gasoline, diesel and other fuels and also accompanying products at gas stations (petrol stations). System uses modern technology pos terminal for reading of data from the fuel card, processing customer fuel cards (entering pin code, selecting of operation type, entering customer information, etc), communication with a centralized server through build-in gsm/gprs modem, printing of receipts. For more information please visit our website www.Technotrade.Ua
HOT-H stainless steel orthopedic and neurosurgery surgical operating table HOT-H multi-purpose operation table is an improvement product developed on the basis of 3008 series head-manipulation type multipurpose operation table and is for use of general operations in chest surgery, department of ophthalmology, department of otolaryngology, department of obstetrics and gynecology, urological department etc. As a unit of non electronic control system comprehensive operation equipment, it is convenient and flexible to operate. PRODUCT'S FEATURES: 1) A multifunctional operation table that applies to various surgical operations and examinations. 2) Adoption of a foot hydraulic pump that integrates oil tank of oil pump and drive mechanism. 3) Adoption of the imported cylinder that controls actions of table top and is convenient to operate and reliable to locate. 4) Compact and rational structure and originate model. 5) Built-in waist bridge is convenient to use. 6) Both guide rail and accessories are made of corrosion resistant stainless steel. 7) All mattresses use the new-style materials that are acid and alkali resistant and disinfection durable. good price
we are manufacturer of black seed oil (kalinji,black cumin etc)virgin coconut oil and black sesam seed oils. seeds used for oil extraction are 1st grade and processed by cold pressing where tempereature does not rise above 35-38 c.pack sizes are 200 ml dark glass bottles
We are producers and suppliers of wheat flour of high quality, good for human consumption and we sell at affordable fob price. Specification: Color: white or white with a cream hue Whiteness: min 54, max 58 Raw gluten: min 24%, max 27% Moisture content: 14% - 15% Packaging: 25/50 pp bag We are looking for interesting customers to establish a long lasting business relation with our buyers. Contact us if interested. Packaging: 25/50 pp bag
Pts controller over fuel dispensers and atg systems for petrol stations is a forecourt controller intended to be used in connection with third party control system for petrol station (pos system, cash register, opt terminal, etc) to provide simultaneous remote control over petrol, diesel, cng and lpg dispensers and automatic tank gauge (atg) systems installed at petrol, cng and lpg stations and storage depots. Pts controller provides control using the single common communication protocol. Pts controller works as a protocol converter and provides conversion of its common communication protocol into various proprietary communication protocols of fuel dispensers and atg systems. Pts controller is supplied with a rich set of api (application programming interfaces) developed under most popular programming languages and environments in order to make comfortable and quick implementation of pts controller into control systems for petrol stations (pos system, cash register, opt terminal, etc). For more information please visit our website www.Technotrade.Ua
We offer a wide range of quilted interlining and other quilted fabrics. We can offer contract quilting to clients using their own or our material to be quilted according to their own specific requirements. ed by: - advanced swiss computerized equipment - high quality threads - qualified and responsible staff - many years of experience Also we provide padding polyester, cotton fiber, wool fiber and a lot of other nonwoven materials at the lowest price Benefits of cooperation with us: - we have our own production of both quilted materials and fillers – this will certainly reduce the amount of logistic and distribution cost of your company because you only have to deal with one company to provide your basic raw material Vacuum packing avaliable, supper press packing avaliable. 2. Standard export packing, with pvc or pe bag, or simple plastic packing, load in carton 3. Carton label / trade mark printing service avaliabe. 4. Insert card, hang tag, wash label, corner tag, trade mark service avaliable
Sunflower oil from the best sunflower varieties of the South of Ukraine. Refined and deodorized. Use: designated for a direct food consumption and food production. Product contents of ingredients: P-mark freezed out deodorised refined sunflower oil. Place of Origin: Melitopol, Zaporizhzhya Region. Without GMO. The Certificate of the Conformity to the Food Safety Management System to the standards of DSTU ISO 22000:2007 No. UA.073-18 as of 27 February 2018, is valid to 26 February 2021. The Certificate of the Conformity to the Food Quality Management System to the standards of DSTU ISO 9001 No. UA. 208-17 as of 20 February 2017, is valid to 19 February 2020. Port of loading - Odessa. Delivery time - 7 days (depending on the volume of the order). Price by agreement
Feed corn (for animal feed use, harvest of 2020). Urgent sale! Country of origin of the Goods: Ukraine. Quality standard: DSTU 4525:2006. Product quality: - moisture content - 154 % max. ; - protein on dry basis nx - 8 % max; - broken kernels - 3% max; - damaged kernels - 3,5% max; - heat damaged - 0.5% max; - foreign matter - 2.0 % max; - test weight - 68 kg/hi min. ; - aflatoxins - 20 ppb max; - weight/Bushel - 4lbs/bu min; - radiation - none; - not allow broken, dust and damage; - non GMO, non toxin pesticide all regulation EU Packing: in bulk. Good quality corn, the port of Odessa -150 tons - the price is $ 214 per FOB.
products: urea 46% granulated Specifications: standard export origin: china. trial batch: 10,000 tons quantity: 50,000 tons per month total quantity: 600,000 tons; contract: 12 months cif price: US $ 235 per ton. the commission is paid by the buyer.( this price including 2 USD fro your side) port of destination: cif port of odessa, ukraine ( as example) payment terms: 100% sblc irrevocable, verified, transferable / mt760 (payment for goods occurs upon arrival of the vessel at the port of destination and after inspection sgs for quality and quantity of goods). check: sgs or saybolt at port or when loading packing: polyethylene bag 50 kg, big bag 500/1000 or in bulk
The scope of activity of our company is the production of premium class charcoal (up to 270t / month). Charcoal is produced from hard oak, hornbeam, ash. You can also buy charcoal from apple and pear wood from us. Charcoal from apples and pears gives food a subtle, exquisite aroma of fruit trees. Special patented production technologies allow charcoal to be pierced at temperatures of 450-550 C. It is considered the most suitable for most areas of coal consumption. The non-volatile carbon content is 93%. We offer packing in our bags of various capacities, or in yours with your company logo. The activity of our company is based on the exchange of information and the individual responsibility of each specialist for the tasks assigned to him. Cooperating with SV-Synergy, you are guaranteed to receive quality products at the best price and a reliable partner in the person of our company.
One of the directions of our business is the production of charcoal on our equipment for the charcoal production The raw material for the production of our products are environmentally friendly wood of west ukraine (oak, hornbeam) Our factory is located in the west of ukraine, which allows to use commercial transport lines - europe and the baltic countries. Also we have practical possibility to produce charcoal briquettes pini kay from wood briquettes pini kay. In order to provide a harmoniously built product, we also provide services for manufacturing of packaging, based on the design layout of our customers. This makes it possible to package our products in the packaging according to the customer, which enables our buyers to get the products- charcoal - fully ready for the further implementation in the recipient country. We are result-oriented and always try to find a solution for all of our partners Looking forward to hear from you Kindly regards
Company LLC "FanCoil Ukraine" specializes in producing and selling modern, cost-effective, high quality and easy to use equipment. Namely-floor convectors and underfloor TM FANCOIL. Our company has more than 10 years, is a competent and reliable partner for our customers. Heating system FANCOIL - are water heaters based on natural or forced air circulation. Some models of the convectors used not only for heating, but also cooling. Also benefits convectors TM FANCOIL are very quiet operation, space-saving installation in the room, powered by a standard electrical outlet, the lowest temperature of the heated surface, moisture resistance, the use of valves and so on. Thanks to all the benefits, convector perfectly suited for installation under windows having panoramic glazing weatherstrip or low space under the doors, terraces, conservatories and indoor swimming pools, showrooms, business centers, residential cottages and apartments with panoramic windows. The heating system is FANCOIL heaters connected to classical heating system. Basic equipment convectors as follows: • box (making possible options: fiberglass, metal powder-coated); • copper-aluminum heat exchanger; • flexible connection hoses with shut-off valves; • tangential fans (in models with forced convection) Optional equipment: • oak grill or duralumin (different colors, roll or longitudinal) • Electronic room thermostat; • converter transformer 220v to 12v, with a built-smooth control fan speed (T35, TR-70, TR-150, TR-300); • converter transformer 220v to 24v, with a built-smooth control fan speed (TR-30, TR-45, TR-75, TR-120); • smooth speed control of fans. Because of design features and requirements, availability of copper-aluminum heat exchangers, fans (for forced convection) - heating (or cooling) Improvement happens very quickly, unlike traditional steel or cast iron radiators. An advantage over the conventional radiators is that they contain 10 times less water resulting in heat convectors is not accumulated. Heating system heats FANCOIL almost instantly so you can quickly respond to changes in room temperature and maintain a constant level. Furthermore, even at a low temperature in heating convectors provide optimal heat transfer. These features allow you to reduce the load on heating equipment. Convectors provide a more uniform distribution of heat in the room, as opposed to steel and cast iron radiators that have a warmer zone is directly from the devices themselves. Even heat distribution prevents condensation and mold formation, and the use convectors facing windows to avoid misting. Convectors TM FANCOIL produced in standard sizes as well as to the individual requirements of clients (radius, angle, etc.) All products are made from high quality materials, making available long warranty on parts convectors: • box of fiberglass-50 years • box with powder coating 10 years • wooden box (floor) - 2 years • copper-aluminum heat exchanger 10 years • aluminum grille-5 years • wooden lattice - 1 year • electrical parts - 5 years • valves - 1 year Low pricing, flexible system of discounts and deadlines of manufacture and delivery of products do TM FANCOIL interesting and comfortable for both the individual user and for wholesale customers. List some objects equipped convectors TM FANCOIL, as well as the price of retail prices of products attached to the letter. 9kg for 1 m.P sizes upon request
Carbamide(Urea) H2N-CO-NH2 TDS- 2081-92 SPECIFICATIONS: 1. Nitrogen fraction of total mass on dry basise, %, not less 46.3-46.2 2. Biuret (Ureido Formamide) fraction of total mass, %, not more 0,6-1,4 3. Loose ammonia fraction of total mass, %, no more, for carbamide - crystal 0,01 - 0,01 - prilled 0,02- 0,03 4. Mass share of water, %, no more: - Method of drying 0,3 - Method Fishera 0,6 - 0,5 5. Friability, % - - 100 6. distribution of sizes, %: - fraction of total mass of granules with size, mm : 1 - 4, not less - - 94 less than 1, not less - 3-5 6-mm sieve residue, no more - Absence 7. Static hardness of granules, kgf/granule, not less - 0,7- 0,5 -0,3 Tha price is 230 $ FOB. Crystal carbamide (urea) is received from ammonia and carbon dioxide. carbamide is used in an industry as raw materials at manufacturing of pitches, glues, etc., for use in agriculture as mineral nitrogen fertilizer. Carbamide can be utilized in animal husbandry as fodder additive. Depending on purpose, two carbamide marks are produced: A- for industry; B for agriculture. Carbamide is non-combustible, fire-and is explosion-proof under normal conditions. As regards to its influence on organism, it falls into 3-rd class of hazardous substances. Carbamide is packed in paper bitumized of laminated bags, polyethylene bags, woven polymeric laminated bags woven polymeric bags with inserts, and also in soft specialized containers as MKR-1, OS. Carbamide is stored in closed store rooms protecting the product from rainfall. At storage of product in bulk its mixture with other fertilizers is not permitted. It is permitted to store carbamide containers and transport packages fastened by synthetic film on open areas. Warranty period of product storage 2 years from the date of manufacturing.
Fuel dispensers' pumpheads (electronics and indicators) unicon-tit are designed for provision of control over fuel dispensers (pumps) to deliver liquid and liquefied petroleum products and visualize this process on indicators of the dispensers. Modes of operation: -autonomous: delivery of petroleum products is made at removal of dispenser nozzle or using a switch start; -autonomous from a preset keyboard: mode of petroleum products delivery (delivery of certain volume, delivery for a certain sum of money, delivery up to a full tank), order's amount and allowance for a delivery are set from a keyboard of the device; -from a control system: mode of petroleum products delivery, order amount and allowance for a delivery are set by a remote control system (cash register, pos system, control panels, etc); -from a control system at setting a doze amount on a keyboard of the indicating device: in this case operation mode of a fuel dispenser and an order amount are set on a keyboard of the indication device and allowance to make delivery of petroleum products – from a remote control system (cash register, pos system, control panels, etc). For more information please visit our website www.Technotrade.Ua
Cranck shears Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 6,3)3150mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model - 3418+ ¦a) thickness*width of the sheet ,mm 6,3*3150 ¦a) stripe length as to the back gauge, mm 700 Gap adjustment, type automatic back gauge drive, type motorized Stroke frequency, p/min 60 Main drive,KWt 11,8 Dimensions, mm 4000)1900)1700 Weight, kg 6200 Guillotine shears model -- 3316++ Crank metal sheet guillotine shears with the inclined blades (model --3316+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 4,0)2500mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3316++ ¦a) thickness*width of the sheet,mm 4,0*2500 ¦a) stripe length as to the back gauge, mm 630 Gap adjustment, type manual back gauge drive, type manual Stroke frequency, p/min 65 Main drive,KWt 8,5 Dimensions, mm 3300)1630)1520 Weight, kg 3870 Guillotine shears model -- 3314+ Crank metal sheet guillotine shears with the inclined blades (model --3314+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 2,5)1600mm/ The guillotine shears are used at the machinery-building companies, farming machinery building, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3314+ ¦a) thickness*width of the sheet,mm 2,5*1600 ¦a) stripe length as to the back gauge, mm 630 Gap adjustment, type Manual/screw back gauge drive, type manual Stroke frequency, p/min 65 Main drive,KWt 3,2 Dimensions, mm 2300)1570)1470 Weight, kg 2000 Guillotine shears model -- 3416 Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 4,0)2000mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3416 ¦a) thickness*width of the sheet, mm 4,0*2000 ¦a) stripe length as to the back gauge, mm 700 Gap adjustment, type automatic back gauge drive, type motorized Stroke frequency, p/min 60 Main drive,KWt 5,6 Dimensions, mm 2610)1600)1510 Weight, kg 2870 Guillotine shears model --478 Crank metal-sheet guillotine shears with the inclined blades (model --478) are meant for the straight cross and longitude cutting. The cutting is done at one stroke according to the sketching. The shears can be operated in the outdoor conditions as well as at in the enclosed space at the temperature conditions - 20¦- +40¦-. Specification Maximum thickness, mm 16 Maximum width, mm 2200 Mains current 3 phases, AC Frequency, Hz 50 Operating voltage, V 380 Stroke frequency 20 Engine power, KWt 30 Dimensions, mm 3150/2275/2350 Weight, kg 9800 Guillotine shears models --+ 3214 Model --+ 3214 ¦a) thickness*width, mm 2,5*2500 Stroke frequency, p/min 33 Main drive,KWt 3 Dimensions, mm 3120)2000)1330 Weight, kg 1800 Crank metal sheet guillotine shears model --+ 6020 H6 * L2500mm Designed for the sheet cutting with the thickness up to 6 mm. Technical features: electric-powered drive, that excludes the usage of compressed air. Gear drive and muster clutch are working in the oil reservoir. The angles and bars, round bars cutting can be done with the special blades/ Specification Max cutting thickness, mm 6 Max cutting width, mm 2500 Stroke frequency, min-1 50 Power, KWt 8,5 Dimensions, mm 3400)1400)1450 Weight, kg 3650
The charcoal kiln UMT-3 The charcoal kiln UMT-3 has all the unique qualities installations series "UMT". But in this model we have provided not only enhanced protection from the so-called "human factor", but also we have developed an automatic protection that works completely offline. It allows to reduce in several times the risk of equipment damage from negligence of employees and increase productivity by 10-15% . Now the minimum capacity of this charcoal kiln is 35 tons per month using wet wood till 50 tons per month using dry wood. Also its possible to burn all kinds of fuel briquettes such as "Pini Key" and "Nestro" into charcoal briquettes The productivity of the briquette is 100-120 tons / month 1.Improved installation design. 2.Increased productivity from 35 tons per moth for charcoal and 100-120 tons per month per briquettes 3.Automatic protection from extreme temperatures, works completely offline. 4.The high quantitative and qualitative characteristics of charcoal and briquette. The ratio of wood to charcoal is 5.1m3 per 1 ton of charcoal 5.Low operating costs. The equipment serves one person whether it is a single installation, two or three. 6.Works on its own gas. Power consumption is 20 W/hour, 24V/hour 7.Quick and easy unloading of finished products and loading of raw materials in the retort - up to 5 minutes 8. Mobility. Charcoal kilns can be moved if its necessary. 9.Work without repairs. We give a guarantee for two years 10.Environmental cleanliness. No emissions into the atmosphere either before or after or during the production process 11.Extended range of plug-ins for the selection of excess heat - a wood drying, hot water boilers, waste incineration. 12.Low cost of equipment. Taking into account the calculation of the cost of a ton of charcoal produced per year, the price of charcoal kiln is the lowest in the world market. Two years of operation have confirmed the reliability of our equipment Parameters Width -depth ?height 5680x2600x2690 mm Weight 8500 kg Productivity 30-55 tons per month Guarantee 24 months Terms of manufacturing 45 workdays
ORIGIN : TURKEY/VIETNAM PACKING : In 50 Kg Bags/BULK. SPECIFICATIONS: CEMENT - 42.5 R : Chemical Composition SILICON DIOXIDE (SIO2) 21.00 ALUMINIUM OXIDE (A12O3) 5.30 FERRIC OXIDE (FE2O3) 3.30 CALCIUM OXIDE (CAO) 65.60 MAGNESIUM OXIDE (MGO) 1.10 SULPHUR TRIOXIDE (SO3) 2.70 LOSS OF IGNITION (LOI) 0.90 TRICALCIUM SILICATE (C3S) 60.00 DICALCIUM SILICATE (C2S) 15.00 TRICALCIUM ALUMINATE (C3A) 8.05 TRICALCIUM ALUMINO FERRICE (C4AF) 9.76 CEMENT - 42.5 R : Physical and Mechanical Properties BLAIN CM2/GR 3.250 AUTOCLAVE EXPANTION 0.02 INITIAL SETTING TIME (VICAT) 105 MINUTES FINAL SETTING TIME (VICAT) 135 MINUTES @ 03 DAY'S 230 KG/CM2 @ 07 DAY 39 S 305 KG/CM2 COMPRESSIVE STRENGTH @ 28 DAY 39 S 420 KG/CM2 QUANTITY PRICE: SPOT CONTRACTS: 12,500 MT â?? USD 105.00/pmt 25,000 MT USD 104.00/pmt 50,000 MT USD 102.00/pmt 100,000 MT USD 100.00/pmt ANNUAL CONTRACTS: 150,000 MT USD 98.00/pmt 300,000 MT USD 95.00/pmt SMALL QUANTITES 500 MTS -8000 MTS @ FOB US$65.00 PMT VIETNAM/IRAN PORTS. ABOVE PRICES ARE MAJOR SEAPORTS AND NOT ISLAND PORTS. DESTINATION DELIVERY: Destination: CIF ASWP. Shipment: First Shipment in 30-45 Days and Rest in Every 30 Days after Receipt of Payment Instrument to the Sellers Bank. PAYMENT: By Irrevocable, Transferable Confirmed DLC 100% Payment at Sight for total Quantity from Top Western Prime Bank. INSPECTION: S.G.S Inspection for Quality and Quantity Service at Sellers Cost at Place of Loading. PROCEDURES: 1) Buyer issues a LOI + 2) Seller issues FCO 3) Buyer sign seal and return the FCO 4) Seller issues Draft Contract 5) Buyer sign, seal and return the Contract, seller sign the contract and return to the Buyer 6) Buyer Bank sends a DLC to the sellerâ??s Bank 7) Shipment Starts.
