Sugar, cane, wheat flour, cereals like corn, wheat, sunflower, rapeseed, soybean, butter, fuel and fuel oil, metallic calcium, aluminum, copper, ferroalloys.
Cranck shears Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 6,3)3150mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model - 3418+ ¦a) thickness*width of the sheet ,mm 6,3*3150 ¦a) stripe length as to the back gauge, mm 700 Gap adjustment, type automatic back gauge drive, type motorized Stroke frequency, p/min 60 Main drive,KWt 11,8 Dimensions, mm 4000)1900)1700 Weight, kg 6200 Guillotine shears model -- 3316++ Crank metal sheet guillotine shears with the inclined blades (model --3316+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 4,0)2500mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3316++ ¦a) thickness*width of the sheet,mm 4,0*2500 ¦a) stripe length as to the back gauge, mm 630 Gap adjustment, type manual back gauge drive, type manual Stroke frequency, p/min 65 Main drive,KWt 8,5 Dimensions, mm 3300)1630)1520 Weight, kg 3870 Guillotine shears model -- 3314+ Crank metal sheet guillotine shears with the inclined blades (model --3314+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 2,5)1600mm/ The guillotine shears are used at the machinery-building companies, farming machinery building, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3314+ ¦a) thickness*width of the sheet,mm 2,5*1600 ¦a) stripe length as to the back gauge, mm 630 Gap adjustment, type Manual/screw back gauge drive, type manual Stroke frequency, p/min 65 Main drive,KWt 3,2 Dimensions, mm 2300)1570)1470 Weight, kg 2000 Guillotine shears model -- 3416 Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 4,0)2000mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3416 ¦a) thickness*width of the sheet, mm 4,0*2000 ¦a) stripe length as to the back gauge, mm 700 Gap adjustment, type automatic back gauge drive, type motorized Stroke frequency, p/min 60 Main drive,KWt 5,6 Dimensions, mm 2610)1600)1510 Weight, kg 2870 Guillotine shears model --478 Crank metal-sheet guillotine shears with the inclined blades (model --478) are meant for the straight cross and longitude cutting. The cutting is done at one stroke according to the sketching. The shears can be operated in the outdoor conditions as well as at in the enclosed space at the temperature conditions - 20¦- +40¦-. Specification Maximum thickness, mm 16 Maximum width, mm 2200 Mains current 3 phases, AC Frequency, Hz 50 Operating voltage, V 380 Stroke frequency 20 Engine power, KWt 30 Dimensions, mm 3150/2275/2350 Weight, kg 9800 Guillotine shears models --+ 3214 Model --+ 3214 ¦a) thickness*width, mm 2,5*2500 Stroke frequency, p/min 33 Main drive,KWt 3 Dimensions, mm 3120)2000)1330 Weight, kg 1800 Crank metal sheet guillotine shears model --+ 6020 H6 * L2500mm Designed for the sheet cutting with the thickness up to 6 mm. Technical features: electric-powered drive, that excludes the usage of compressed air. Gear drive and muster clutch are working in the oil reservoir. The angles and bars, round bars cutting can be done with the special blades/ Specification Max cutting thickness, mm 6 Max cutting width, mm 2500 Stroke frequency, min-1 50 Power, KWt 8,5 Dimensions, mm 3400)1400)1450 Weight, kg 3650
good offer for Used Rails : Possible to supply 100 thousand tons per month - 1 million 200 tons per year. (used, like new). Price CIF -252 dollars. Contact us for more info.
Origin: Saudi Arabia Quantity: min 500.000kg - 5,000,000 MT Contract Length: 24 Months Price: FOB $190; CIF $205 (Comission pay by buyer) Cut: 1.2 to 1.5m Delivery: ASWP Packing BULKSHIPMENT. Payment: Irrevocable, Confirmed DLC MT700 from top international bank. First Shipment: 30,000 MT Monthly Shipment: 200,000 METRIC TONS per Month. Inspection: SGS, BUREAU VERITAS, ALFRED KNIGHTCERTIFIED. WORKING TRANSACTION PROCEDURE: â?¢ Buyer issues LOI addressed to the Seller â?¢ Seller issues FCO. â?¢ Buyer sign FCO and issues /ICPO. â?¢ Seller issues Draft Contract for review and signature. â?¢ Buyer send back the Draft Contract Approved and Signed or with Amendments to be approved by seller. â?¢ Buyer issues agreed DRAFT of MT700 bank to bank (only 20% of full amount) â?¢ Seller confirms and issues Pro-forma invoice and issue pop (proof of product) to the BUYER, SGS/Q&Q, certificate of Oregon, ownership, videos. All from SELLER bank to BUYER bank. Buyer issues agreed LC (MT 700) bank to bank Buyer is permitted to VISIT LOADING PORT for the SGS Inspection before loading and shipment. PB (performance bound) 2% as bank guarantee to the BUYER Via swift. Shipments will commence as scheduled in the contract. Payment Method: 1-LC MT 700 IRREFOCABLE, CONFIRMED, TRANSFERABLE, AT SIGHT WITH 20% AMOUNT OF OUR COMMERCIAL INVOICE. COPY # (1). 2- LC MT 700 IRREFOCABLE, CONFIRMED, AT SIGHT WITH FULL AMOUNT OF OUR COMMERCIAL INVOICE. COPY # (2).
We are offering you the Copper Wire Scrap Millberry 99.99% at $3800 Mt/cif any port Copper detailed specification : Wire diameter: 0.30mm, 0.25mm, 0.20mm Weight/spool: 3 kg, 5 kg, 7 kg, 15 kg, 20kg Tensile strength: 1000 N/mm2, 900 N/mm2, 500 N/mm2, 450 N/mm2, N/mm2 Copper Scrap CERTIFICATE OF ANALYSIS Item Standard Result Cu% 99.9 min 99.99 Sb% 0.002max 0.001 As % 0.002max 0.0006 Fe% 0.005 max 0.0012 Ni% 0.002 max 0.0008 Pb % 0.005max 0.0025 Sn% 0.002max 0.0007 S% 0.005max 0.003 O% 0.002max 0.001 Zn% 0.005max 0.002 P% 0.001max 0.0002 ELEMENTS VALUE RESULT Copper Cu 99.95% Min. Cobalt Co 0.001% Max. carbon C 0.003% max Iron Fe 0.005% Max. phosphorus P 0.01% Max. sulphur S 0.01% Max. Znic Z 0.03% Max. Minimum Order: 25 MT Capacity: 10,000 mt Location: Eastern Europe Payment terms: Bank transfer only. Supply Ability Supply Ability 30000 Metric Ton/Metric Tons per Month Regards Newman Cole
.Intermediary in the supply of metal, urea/ fertilizer for agric
Cranck shears with inclined throat. Suitable to work in high/low temperature environment. Drilling rig, centering skids.Manufacture, repair all types of metal working equipment
Aluminum A7 From Russian Federadion, the volume - 20/30 thousand tons LME-160 $. The volume can be taken at once and in the batches. Primary aluminium with impurities no greater than the chemical composition of one of the registered designations.
Offer of copper cathode 99,999 % for export Ingots, weight 1 kg, vacuum packed in boxes of 25 kg Copper (metallic) high purity Isotope Cu63 / Cu65 Price at 164 euros customs Payment when loading in Russia, Voronezh Other forms of payment can be discussed
Company LLC "FanCoil Ukraine" specializes in producing and selling modern, cost-effective, high quality and easy to use equipment. Namely-floor convectors and underfloor TM FANCOIL. Our company has more than 10 years, is a competent and reliable partner for our customers. Heating system FANCOIL - are water heaters based on natural or forced air circulation. Some models of the convectors used not only for heating, but also cooling. Also benefits convectors TM FANCOIL are very quiet operation, space-saving installation in the room, powered by a standard electrical outlet, the lowest temperature of the heated surface, moisture resistance, the use of valves and so on. Thanks to all the benefits, convector perfectly suited for installation under windows having panoramic glazing weatherstrip or low space under the doors, terraces, conservatories and indoor swimming pools, showrooms, business centers, residential cottages and apartments with panoramic windows. The heating system is FANCOIL heaters connected to classical heating system. Basic equipment convectors as follows: • box (making possible options: fiberglass, metal powder-coated); • copper-aluminum heat exchanger; • flexible connection hoses with shut-off valves; • tangential fans (in models with forced convection) Optional equipment: • oak grill or duralumin (different colors, roll or longitudinal) • Electronic room thermostat; • converter transformer 220v to 12v, with a built-smooth control fan speed (T35, TR-70, TR-150, TR-300); • converter transformer 220v to 24v, with a built-smooth control fan speed (TR-30, TR-45, TR-75, TR-120); • smooth speed control of fans. Because of design features and requirements, availability of copper-aluminum heat exchangers, fans (for forced convection) - heating (or cooling) Improvement happens very quickly, unlike traditional steel or cast iron radiators. An advantage over the conventional radiators is that they contain 10 times less water resulting in heat convectors is not accumulated. Heating system heats FANCOIL almost instantly so you can quickly respond to changes in room temperature and maintain a constant level. Furthermore, even at a low temperature in heating convectors provide optimal heat transfer. These features allow you to reduce the load on heating equipment. Convectors provide a more uniform distribution of heat in the room, as opposed to steel and cast iron radiators that have a warmer zone is directly from the devices themselves. Even heat distribution prevents condensation and mold formation, and the use convectors facing windows to avoid misting. Convectors TM FANCOIL produced in standard sizes as well as to the individual requirements of clients (radius, angle, etc.) All products are made from high quality materials, making available long warranty on parts convectors: • box of fiberglass-50 years • box with powder coating 10 years • wooden box (floor) - 2 years • copper-aluminum heat exchanger 10 years • aluminum grille-5 years • wooden lattice - 1 year • electrical parts - 5 years • valves - 1 year Low pricing, flexible system of discounts and deadlines of manufacture and delivery of products do TM FANCOIL interesting and comfortable for both the individual user and for wholesale customers. List some objects equipped convectors TM FANCOIL, as well as the price of retail prices of products attached to the letter. 9kg for 1 m.P sizes upon request
Pts controller over fuel dispensers and atg systems for petrol stations is a forecourt controller intended to be used in connection with third party control system for petrol station (pos system, cash register, opt terminal, etc) to provide simultaneous remote control over petrol, diesel, cng and lpg dispensers and automatic tank gauge (atg) systems installed at petrol, cng and lpg stations and storage depots. Pts controller provides control using the single common communication protocol. Pts controller works as a protocol converter and provides conversion of its common communication protocol into various proprietary communication protocols of fuel dispensers and atg systems. Pts controller is supplied with a rich set of api (application programming interfaces) developed under most popular programming languages and environments in order to make comfortable and quick implementation of pts controller into control systems for petrol stations (pos system, cash register, opt terminal, etc). For more information please visit our website www.Technotrade.Ua
signed to transmit / receive data via radio channel at a speed of up to 9600 bit / s in the frequency range (2410-2465) mhz with the transmitter output power up to 10 mw. If cable routing between devices (which usually are using wired communication channels for data exchange) is impossible, then it is necessary to look for other means of communication, other than wired. Wireless transmission of data between devices is one of possible solutions for this problem. Wcd is a variation of radio extenders for communication lines using for communication interfaces rs-232 and rs-485. For more information please visit our website www.Technotrade.Ua
All types of rebars. Price after loi. For serious buyers! from 10000 mt/month. Standart rebar packing.
Granular Sulphur in Bulk, FCA in South Yoloten city , with the price of 40 $ MT. We have ability to arrange the logistics and supply to any country with CIF conditions. The payment condition is by prepayment (preferably) or SBLC / DLC / LC (needs be discussed). The product is of Turkmenistan origin and we are able supply of the Sulphur till 50 000 MT monthly. Sulfur is one of the most important agricultural and industrial raw materials Sulphur is the primary source in the production of sulphuric acid, the worldâ??s most widely used chemical. Sulphuric acid is an essential intermediate in many processes in the chemical and manufacturing industries. Sulphuric acid also is used by the fertilizer industry to manufacture primarily phosphates, nitrogen, potassium, and sulphate fertilizers.
Granular Sulphur in 1000kg PP Abbas port price of 99 $ MT. We have ability to arrange the logistics and supply to any country with CIF conditions. The payment condition is by prepayment (preferably) or SBLC / DLC / LC (needs be discussed). The product is of Turkmenistan origin and we are able supply of the Sulphur till 50 000 MT monthly. Sulphur is the primary source in the production of sulphuric acid, the worldâ??s most widely used chemical. Sulphuric acid is an essential intermediate in many processes in the chemical and manufacturing industries. Sulphuric acid also is used by the fertilizer industry to manufacture primarily phosphates, nitrogen, potassium, and sulphate fertilizers.
Copper cathode, aluminium ingot, steel rebar, steel plates and coils.
Nickel wire.
Steel bars, wire rod, hot rolled coils, sheets, re-bars, rebar.Shipping
Hardware and software solutions for petrol stations.
Titanium product.
