TARGET 4500 CF-4 engine oils are blended from highly refined base stocks and selected additives to provide excellent detergency, dispersancy, and anti-wear properties. The High Base Number provides superior level of reserve alkalinity to protect vital engine parts against corrosion and premature engine wear. They offer longer drain capabilities in high output turbo-charged Diesel engines operating under severe service conditions. APPLICATIONS TARGET 4500 CF-4 oils meet the requirements of most high-speed Diesel and gasoline engines of mixed fleets. Recommended for commercial road transport, high RPM Generator sets and sea transport. BENEFITS TARGET 4500 CF-4 engine oils reduce piston deposits, provide protection against cylinder bore polishing, reduce oil consumption, reduce filter plugging, offer very low oxidation and consequent thickening due to high TBN levels present which neutralize corrosive acids resulting from oxidation. PERFORMANCE STANDARDS SAE 20W50 API CF-4 TYPICAL KEY PROPERTIES TARGET 4500 CF-4 20W/50 Kinematic Viscosity @100C, cSt ASTM D445 : 19.5 Viscosity Index ASTM D2270 : 125 Flash Point (COC), C ASTM D92 : 225 Pour Point, C ASTM D97 : -21 Total Base Number, mgKOH/g ASTM D2896 : 13 Sulphated Ash%Wt ASTM D874 : 1.4 Minimum Order Size : order size must be one container Packaging details - flexi bag, bottles
TARGET 9000 FULLY SYNTHETIC motor oil is based on Uniform Molecular Technology of full synthetic base stocks that provides a smooth layer of lubricant between the surfaces sliding over each other hence reducing friction and providing ultimate fuel efficiency. The selection of the most advanced additive technology and superior synthetic base stocks provides engine protection to the highest rated RPM engines of sport cars and precisely engineered engines of modern passenger cars operating at extreme temperatures and prevailing through tough driving conditions. APPLICATIONS TARGET SUPER 9000 FULLY SYNTHETIC is applicable to all kinds of precisely engineered modern passenger and sports cars. BENEFITS Hi-tech and most advanced additives & fully synthetic base oils technology ensure ultimate engine protection at peak performance and is specially suitable for high performance modern passenger cars. Advanced synthetic technology maintains oil fluidity at low temperatures keeping engine components lubricated allowing easy start-up and maximum engine protection. Outstanding shear stability and high viscosity index extends engineâ??s service life by maintaining protective oil film at extreme temperatures, heavy load and high speed conditions. * Advanced uniform molecular technology minimizes oil consumption, reducing deposition on engine components and oil supply lines helping maintain fuel economy and a cleaner environment. * Protects engine over a wide temperature range, ensuring less engine downtime with reduced maintenance cost, enhancing fuel economy and engine efficiency at lower oil temperatures. * Active anti-sludge agent increases oil drain interval, keeping the engine clean for longer periods, removing chances of oil starvation due to filter blockade PERFORMANCE STANDARDS SAE 5W-30 API SN/CI-4
DESCRIPTION * TARGET EP GEAR OIL GL-5 oils are designed for use in industrial and automotive gearboxes and general lubricating systems. These are multi-purpose extreme pressure sulphur based oils with EP additives, blended with special inhibitors to increase aging stability and anti-corrosion properties. TARGET EP GEAR OIL GL-5 gear oils have a high persistence to break down under mechanical loads and help minimize wear under heavy and shock load conditions. APPLICATIONS Suitable for manual transmissions, transaxles in automotive gears, particularly hypoid gears in passenger cars. Suitable for all equipment operated under high speed/low torque and low speed/high toque conditions. Ideal for gear sets on tractors and agricultural equipment, track rollers of crawler tractors and a variety of industrial applications. PERFORMANCE STANDARDS API GL-5 SAE 85W140, 80W90 US MIL L-2105D BENEFITS TARGET EP GEAR OIL GL-5 oils exhibit excellent resistance to aging and oxidation, thus prolonging service intervals. They provide excellent protection against corrosion of steel as well as non-ferrous metals and possess superb anti-wear properties. They also offer excellent shear stability as well as provide rapid air release. These gear oils have good demulsifying properties and offer increased lubricant life. Minimum Order Size : order size must be one container Packaging details - flexi bag, bottles
TARGET SUPER-DUTY DESCRIPTION TARGET SUPER-DUTY is a high performance and more economical option of engine oil for both diesel as well as petrol engines operating under less severe conditions. Blended from good quality base oils with a balanced Additive package is ideal for engines working where extreme climatic conditions and speeds are not a problem. APPLICATIONS Suitable for light duty diesel as well as petrol engines working under moderate conditions. BENEFITS TARGET SUPER-DUTY provides efficient lubrication over a wide range of except extreme temperatures. Cost effective, oil of choice for tractors. PERFORMANCE STANDARDS API SD/CC SAE 30, 40, 50 US MIL 2104A Minimum Order Size : order size must be one container Packaging details : flexi bag, bottles
DESCRIPTION TARGET 4500 SG is a multi-grade; high performance engine oil specially formulated to meet the requirement of 4-stroke engine operated automobiles. TARGET 4500 SG is blended with specially selected additive system and high quality paraffinic base stocks to withstand very high temperature found in 4-stroke engine's combustion chamber. This oil is designed to give excellent performance for a long period under severe operating conditions Performance features SAE 20W-50 API SG Applications TARGET 4500 SG is designed for naturally aspirated or turbocharged vehicles operating under moderate to severe working conditions. Benefits TARGET 4500 SG is formulated with special antioxidant additive to enhance engine life and increase oil drain intervals. Equally beneficial for gasoline engine. Improved piston and ring groove deposit control and reduced wear. Minimum Order Size : order size must be one container Packaging details - flexi bag, bottles
TARGET EP GEAR OIL GL-5 oils are designed for use in industrial and automotive gearboxes and general lubricating systems. These are multi-purpose extreme pressure sulphur based oils with EP additives, blended with special inhibitors to increase aging stability and anti-corrosion properties. TARGET EP GEAR OIL GL-5 gear oils have a high persistence to break down under mechanical loads and help minimize wear under heavy and shock load conditions. APPLICATIONS Suitable for manual transmissions, transaxles in automotive gears, particularly hypoid gears in passenger cars. Suitable for all equipment operated under high speed/low torque and low speed/high toque conditions. Ideal for gear sets on tractors and agricultural equipment, track rollers of crawler tractors and a variety of industrial applications. PERFORMANCE STANDARDS API GL-5 SAE 85W140, 80W90 US MIL L-2105D BENEFITS TARGET EP GEAR OIL GL-5 oils exhibit excellent resistance to aging and oxidation, thus prolonging service intervals. They provide excellent protection against corrosion of steel as well as non-ferrous metals and possess superb anti-wear properties. They also offer excellent shear stability as well as provide rapid air release. These gear oils have good demulsifying properties and offer increased lubricant life Minimum Order Size : order size must be one container Packaging details - flexi bag, bottles
TARGET 7000 is a premium quality synthetic formula fortified with advance additive component technology. TARGET 7000 ensured robust and longer service than the conventional oils to provide engine protection, maintain viscosity at high and low temperatures this ensures easy start-up and excellent wear protection at high temperatures. TARGET SUPER 7000 also provides strong protection to engine parts against corrosion and avoid formation of the anti-oxidative characteristics, resist oil degradation and controls oil thickening. APPLICATIONS TARGET SUPER 7000 is developed for high speed four strokes turbocharged or naturally aspirated gasoline engines. It is equally suitable for all types of stationary and off road gasoline engines. High detergency and excellent dispersancy controls deposit at wide temperature ranges keeping engine components clean, removing contaminants from oil supply lines ensuring perfect lubrication. BENEFITS Premium quality synthetic formula multi-grade engine oil suitable for modern passenger cars. Advanced additive and base oil technology ensures protective oil film strength at extreme temperature and load conditions reducing friction between moving parts, enhancing fuel efficiency. Good thermal and oxidation stability extends oil drain interval and ensures less engine component deposit. Excellent corrosion protection properties provide relief from rust and corrosion caused by acid formation and extends engine component service life Uniform Molecular Technology provides protection from cold temperature startup wear, reducing energy losses improving fuel efficiency. PERFORMANCE STANDARDS SAE 20W-50 API SL Minimum Order Size : order size must be one container Packaging details : flexi bag, bottles
TARGET FLEET SUPER 5000 CH-4/SJ engine oils are blended from highly refined base stocks and selected additives to provide excellent detergency, dispersancy, and anti-wear properties. The High Base Number provides superior level of reserve alkalinity to protect vital engine parts against corrosion and premature engine wear. They offer longer drain capabilities in high output turbo-charged Diesel engines operating under severe service conditions. APPLICATIONS TARGET FLEET SUPER 5000 CH-4/SJ oils meet the requirements of most high-speed Diesel and gasoline engines of mixed fleets. Recommended for commercial road transport, high RPM Generator sets and sea transport. BENEFITS TARGET FLEET SUPER 5000 CH-4/SJ engine oils reduce piston deposits, provide protection against cylinder bore polishing, reduce oil consumption, reduce filter plugging, offer very low oxidation and consequent thickening due to high TBN levels present which neutralize corrosive acids resulting from oxidation. PERFORMANCE STANDARDS SAE 20W50 API CH-4/SJ Minimum Order Size : order size must be one container Packaging details : flexi bag, bottles
TARGET 9000 FULLY SYNTHETIC motor oil is based on Uniform Molecular Technology of full synthetic base stocks that provides a smooth layer of lubricant between the surfaces sliding over each other hence reducing friction and providing ultimate fuel efficiency. The selection of the most advanced additive technology and superior synthetic base stocks provides engine protection to the highest rated RPM engines of sport cars and precisely engineered engines of modern passenger cars operating at extreme temperatures and prevailing through tough driving conditions. APPLICATIONS TARGET SUPER 9000 FULLY SYNTHETIC is applicable to all kinds of precisely engineered modern passenger and sports cars. BENEFITS Hi-tech and most advanced additives & fully synthetic base oils technology ensure ultimate engine protection at peak performance and is specially suitable for high performance modern passenger cars. Advanced synthetic technology maintains oil fluidity at low temperatures keeping engine components lubricated allowing easy start-up and maximum engine protection. Outstanding shear stability and high viscosity index extends engineâ??s service life by maintaining protective oil film at extreme temperatures, heavy load and high speed conditions. Advanced uniform molecular technology minimizes oil consumption, reducing deposition on engine components and oil supply lines helping maintain fuel economy and a cleaner environment. Protects engine over a wide temperature range, ensuring less engine downtime with reduced maintenance cost, enhancing fuel economy and engine efficiency at lower oil temperatures. Active anti-sludge agent increases oil drain interval, keeping the engine clean for longer periods, removing chances of oil starvation due to filter blockade. PERFORMANCE STANDARDS SAE 5W-30 API SN/CI-4 Minimum Order Size : order size must be one container Packaging details : flexi bag, bottles
TARGET MARSHAL ADVANCE Formula are premium multi-grade API CF/SF universal type crankcase oils specifically designed for use in a wide range of Diesel and gasoline engines. They are formulated with highly refined base stocks and a Package Additive System of anti-wear, anti-oxidant, rust-preventive, detergent, dispersant and de-foaming agents. MARSHAL 4000 engine oils offer remarkable tolerance towards the sulphur content in the fuels. APPLICATIONS Ideal for naturally aspirated and some moderately turbo-charged Diesel engines operating on fuels with sulphur contents as high as 1.5 mass percent without the need to adjust drain intervals to ensure optimum engine life and performance. Suitable also for Caterpillar pre-combustion type engines. Also recommended for use in many non-engine applications in highway, construction and agricultural equipments such as transmission, final drives and hydraulic system of Caterpillar tractors. PERFORMANCE STANDARDS API CF/SF US MIL L-2104 Minimum Order Size : order size must be one container Packaging details : flexi bag, bottles
A premium quality, shear stable, multigrade cranscase oil which provides out standing performance in all passenger cares and light travel high performance four-cycle gasoline engines. In 4 liters bottles and 208 liters plastic drums
Powder coating.
Garments t-shirts and paints.Buying agent
Painting brush.Shipments
Paint brush.
Coatings and paints.Manufacturer
Dyes & chemical.
Calcium carbonate (masterbatch, filler, additive) for application woven bags, cable, pe blown film, bags, injection moulding, paints.
Decorative & industrial paints, wide range of multi-colored textured coatings, water & heat proof coatings, dry oxide powder colors, upvc doors & windows, plastic pail buckets.
Break Fluid.
