Gboard�® ContraSag MR is a lightweight and hard-edged, moisture resistant plasterboard with enhanced sag resistant properties. It is mainly used for interior ceiling applications. The core of the board consists of a special combination of non-combustible gypsum, reinforced with fiberglass, silicon oil and special additives. The oil in the core acts as a water repellent rendering it more resistant to moisture. Gboard ContraSag MR has a green paper face. By using Gboard ContraSag MR, material costs are greatly reduced mainly because of the lower number of metal frames required for installation (for the same application area compared with regular types of gypsum boards). To achieve the same structural integrity as other gypsum board suspended ceiling systems, the required thickness of the metal frames is also reduced. Gboard ContraSag MR eliminates the cost of moisture resistance treatments. Advantages Gboard ContraSag MR is enhanced with special additives to repel moisture and resist sagging It is highly recommended in areas exposed to moisture The large spacing between the furring channels results in using less metal frames leading to cost reduction. Surface Finishing Multiple finishing options: Painted (Water or oil bas paint) Wallpaper, vinyl,wood Joint filling With Gcoat All Purpose Joint Compound Edge Types Squared edge Tapered Edge Standards ASTM C1396 ASTM C473 ASTM E84 Dimensions Width 1200 mm to 1220 mm Length 2000 mm, 2400 mm, 2440 mm 2500mm, 3000 mm Thickness: 12.5mm
Gboard Flexa is a flexible plasterboard designed to accommodate curved walls and ceilings. Using advanced technology and special additives Gboard Flexa is designed to have a wider bend radius and superior flexible properties. Gboar Flexa can be installed over a timber, metal profiles, and curved masonry walls. It is used to render aesthetically pleasing architectural effects for interior walls and ceilings. Advantages Ideal for interior rennovations Creates aesthetically appealing walls and ceilings with design flexibility. Surface Finishing Multiple finishing options: Painted (Water or oil bas paint) Wallpaper, vinyl,wood Joint fillingWith Gcoat All Purpose Joint Compound Edge Types Squared edge Standards ASTM C1396 ASTM C473 ASTM E84 Dimensions Width 1200mm,1220mm Length 2000mm, 2400mm, 2440mm, 2500mm, 3000mm Thickness: 6.5mm
Gboard Core is manufactured with a thick type X fire-resistant gypsum core. It has enhanced moisture, mold, sound, and impact resistance properties and is used in shaft wall systems, and stairwells where high performance is required to provide enhanced safety for building occupants. Gboard Core system is based on a range of special metal profiles, mainly the Gframe CH-stud to guarantee high performance, stability, ease of installation, and maintenance. Advantages Ideal installation in elevators, stairs, and vertical shafts Edge Types Squared edge Standards ASTM C1396 ASTM C473 ASTM E84 ASTM E119 Dimensions Width: 600 mm, 610 mm Thickness: 25.0 mm Length: 3000 mm
Cboard RG is composed of Portland cement, high purity silica sand, reinforcing pulp recycled in our facilities and additives for water, and fire resistance properties. Cboard�® RG is a state-of-the-art asbestos free, highly durable and practical board used in many finishing applications; partition walls, dry linings, suspended ceilings, flooring, and external cladding. Cboard RG is impact resistant, durable and requires low maintenance. All materials are certified based on ASTM and EN standards and tested in approved laboratories. Advantages A solidly light regular fiber cement board ideal for indoor applications. Surface Finishing: Multiple finishing options Painted (Water or oil bas paint) Wallpaper, vinyl,wood Joint filling with Ccoat Multipurpose Joint Compound Edge Types: Squared edge Tapered Edge Standards: ASTM C1186 ASTM E84 ASTM C518 Dimensions: Width 1200mm 1220mm; Length 2400mm, 3000mm Thickness: 4.5mm, 6mm, 8mm, 9mm, 10mm, 12mm, 16mm, 18mm, 20mm
Building materials, gypsum, gypsum powder, gypsum boards, fiber cement boards, smart products, finishing compounds, frames & accessories, systems and solutions..
GULF Gypsum Fibra is suitable for surface finishings and decorative elements, with a fast-setting time. It is made of extremely fine white gypsum, consisting essentially of calcined gypsum CaSO4.2H2O. Advantages: High �exural and compressive strength No cracks. Edge Types: White powder Standards: ASTM C59/59 M BS EN 13279-1 Iso 90001 :2015 ASTM C 471/472
Castrock is a multicasting plaster consisting of high purity natural gypsum. CaSO4 H2O is the main component of the Castrock powder; It is used for molding works, mainly for ceramic and sanitary and tableware. Castrockâ?¢ is a multicasting plaster applied for sanitary ware and in molding & casting due to its low expansion, excellent strength, and hardness. It is used for all kinds of ornamental plasterwork. Advantages: Castrock is a multicasting plaster with low porosity It is used for molding and for decorative purposes. Standards: ASTM C59/59 M BS EN 13279-1 Iso 90001 :2015 Iso 90001 :2015; ASTM C472/471
Castrock Advanced is a multicasting white plaster consisting of high purity natural gypsum with CaSO4 H2O as its main component. It is used as a protective or decorative coating of walls and for molding and casting works, mainly ceramic, sanitary ware, and tableware. Castrock. Advanced holds the same features as Castrock including low expansion, low porosity, excellent strength, and hardness but with a faster setting time. It is used for all kinds of ornamental plasterwork. Advantages: Ideal for ornamental plasterwork, molding and casting, and ceramic work Easy to use with a fast setting time. Standards: ASTM C59/59 M BS EN 13279-1 Iso 90001 :2015 ASTM C472/471
GULF Gypsum is suitable for surfaces finishings and decorative elements, with a moderate setting time. It is made of fine white gypsum, consisting essentially of calcined gypsum CaSO4.2H2O Advantages: Compressive strength suitable for casting Suitable for building finishing purposes. Edge Types: White powder 40 kg paper bag Standards: ASTM C59/59 M BS EN 13279-1 Iso 90001 :2015 ASTM C 471 ASTM C 472
MURA refers to a new generation of panels with unprecedented diversity and flexibility. It is an engineered panel that provides insulation, internal and external skins with lightweight characteristics in a solid one-piece component. panels consist of an insulating foam core made of expanded or extruded polystyrene (EPS or XPS) sandwiched between two layers of either gypsum boards or �ber cement boards. The gypsum and �ber cement boards are supplied in different types to provide a wide range of performance attributes. Water, impact & wire resistant Thermal insulation Sound insulation Advantages: MURA skin acts as the protective layer from natural and human hazards while the core shields the space from heat and undesired background noise Depending on the skin of the panels, MURA can provide the designer/builder with all possible performance attributes The EPS and XPS core offers ideal thermal insulation characteristics for all weather conditions MURA� provides high sound insulation that can reach a sound transmission class up to twice the value provided by conventional walls Edge Types: Tongue and Groove Dimensions: Panel width: 1200mm Panel length: 2400mm - 3000mm Panel thickness: 100mm Tongue width: 50 mm Groove width: 50 mm
Durawall panels are highly innovative, user-friendly, and lightweight wall paneling systems used in internal and external applications providing maximum efficiency and comfort. They have high thermal, sound, and �re insulation properties. Durawall consists of a lightweight cement EPS core sandwiched between two layers of �ber cement boards. This combination of material gives the panels rigidity, strength, and high insulation. The panels also provide �exibility for handling and installation. Durawall was developed to accelerate the construction process while maintaining a high �nishing quality. Advantages: Manufactured using the latest technologies for a reduced environmental impact Durawall panels are non-�ammable with Class A classification for fire rating Durawall has ideal thermal insulation characteristics for all weather conditions. The system stabilizes indoor temperatures by reducing heat losses and as a result costs associated with heating and cooling The Durawall system provides high sound insulation reaching a sound transmission class up to twice the value provided by conventional wall systems for the same thickness. Edge Types: Tongue and Groove Dimensions: Length: 2440mm, 3000mm, 3600mm Width: 610mm Thickness: 75mm, 100mm, 150mm, 200mm
Temploc is a thermal laminate panel designed to provide comfort by conserving the ambient temperature within a space. A new generation of composite thermal panels with high insulation. Temploc is composed of a gypsum board, fiber cement board, or a hybrid board glued to an insulation backing made of expanded polystyrene (EPS) or extruded polystyrene (XPS). Advantages: The thermal boards are composite panels made of two shells: your choice of Gypsum/Fiber cement/Hybrid boards and Inulation material Whether the temperature inside the envelope increases or decreases, Temploc's thermal insulation uses the energy of the medium at a temperature lower than indoors and higher than outdoors Temploc panels are installed using the dot and dab method, a dry lining method designed for easy and fast mounting of panels to concrete or masonry blocks. No metal frames needed Edge Types: Squared Tapered
Ccoat Multi-purpose Joint Compound is an asbestos free ready to use fiber cement multipurpose compound. Designed for filling, repairing cracks, trimming, hiding screws, and skimming, Ccoat is the most suitable smooth finishing for fiber cement boards, Cboard. Advantages: Highly rigid multi-purpose compound with extreme weather resistance A ready to use compound resulting in a smooth finish. Standards: Ccoat Fiber Cement Multipurpose Compound complies with EN 13963:2014 type 3A.
Gcoat All Purpose Joint Compound is an air drying ready-mixed compound designed for applying drywall filling, repairing cracks, trimming, hiding screws, and skim coating in interior gypsum board systems. Being easy to apply Gcoat has a wide coverage with low dust emission. A ready to use solution for drywall systems. Advantages: Gcoat is ready to use, workable, and easy to apply Highly performant joint compound with low dust emission An eco friendly product. Standards: Gcoat All Purpose Joint Compound complies with EN 13963:2014 Standard as type 3A, produced under quality system certified as conforming with ISO 9001: 2015
Gframe C-38 Channel is manufactured, and roll formed in 3m strips with varying widths and gauges. Applications: Ceiling System Dimensions: 38
OVERVIEW Gframe CH-Stud is manufactured in 3m strips with varying widths and gauges to match the appropriate tracks. Applications: Shaft Wall System Dimensions: 64 100 150
Gframe Nogging Track is manufactured to support the Gframe C-Stud and prevent its twisting. It is used in drywall partitioning and lining. Applications: Partition System Lining System Dimensions: 40 50 64 70 75 92 100 125 150
OVERVIEW: Gframe E-Stud is manufactured in 3m strips with varying widths and gauges to support the structure of the shaft lining. Applications: Shaft Wall System Dimensions: 64 100 150
Gframe Perimeter L-angle is manufactured and roll formed in 3m strips with varying flange dimensions and gauges. Applications: Partition System Lining System Ceiling System Facade Dimensions: 25x25
Gframe Shadow Gap is a metal frame installed around the perimeter of the gypsum suspended ceiling or door frames, providing an architectural design effect. It provides a trimmed ceiling effect on the edges. Applications: Ceiling System Dimensions: 20x30x15x30 20x20x20x13 20x10x13x20