The fully automatic carpet cleaning machine that can be controlled and programmed via computer. It's the latest technological product on carpet washing that has been produced in collaboration with TÜBITAK. Thanks to its being programmed via a computer, it can wash 6m2 carpet to such a competitive cost as approximately 50 Kr by using the water and the electricity efficiently. The cleaning is started by the personnel when he press the button to start after putting the carpet or carpets on the washing platform properly. Approximately in 4-5 minutes the process can be ended. By the way, the personnel can run other errands during the washing process. For instance, he may compress, dry and pack the carpets. It precisely runs on 6.9 kw electricity in an hour. It can wash 100 m2 carpet in that time. Its consumption of water derives from 300 litres to 500 litres. You can use a program that has been already set up on the machine or edit your own program upon the amounth you want to use. Your choice is registered in memory. The machine rubs the carpet with 3 or 4 brushes pressing effectively both horizantally and vertically on the carpet with 170 circulation of each brush at the same time. The dense strains, which could not removed at the first process,can be removed easily in the third or more washing process with the effect of water and the chemicals. Since hairs and fuzz, which are not brushed completely from the carpet, are swept by the machine settled down on slopping ground, it is not necessary to harrow the carpet after washing. Remote system: Full automatic The number of the brushes: 3 Washing capacity: 65m2/saat Voltage: 380v-50hz The total power to use: 7kw Brush engine circulation: 1400dk Other equipments: 1p. 300lt water tank 1p. 300lt Detergent Tank 1p. Water Pomp 1p. Detergent Dosage Pomp 1p. Platform Floor Carpet. The diameter of the brush: 42cm The width of the platform: 2.60cm The length of the platform: 3.77cm Drum measures: 240cmx450cm.
The fully automatic carpet cleaning machine that can be controlled and programmed via computer. It’s the latest technological product on carpet washing that has been produced in collaboration with TÜBITAK. Thanks to its being programmed via a computer, it can wash 6m2 carpet to such a competitive cost as approximately 50 Kr by using the water and the electricity efficiently. The cleaning is started by the personnel when he press the button “start” after putting the carpet or carpets on the washing platform properly. Approximately in 4-5 minutes the process can be ended. By the way, the personnel can run other errands during the washing process. For instance, he may compress, dry and pack the carpets. It precisely runs on 6.9 kw electricity in an hour. It can wash 100 m2 carpet in that time. Its consumption of water derives from 300 litres to 500 litres. You can use a program that has been already set up on the machine or edit your own program upon the amounth you want to use. Your choice is registered in memory. The machine rubs the carpet with 3 or 4 brushes pressing effectively both horizantally and vertically on the carpet with 170 circulation of each brush at the same time. The dense strains, which could not removed at the first process,can be removed easily in the third or more washing process with the effect of water and the chemicals. Since hairs and fuzz, which are not brushed completely from the carpet, are swept by the machine settled down on slopping ground, it is not necessary to harrow the carpet after washing. Remote system:full automatic The number of the brushes:3 Washing capacity:65m2/saat Voltage380v-50hz: The total power to use:7kw Drum measures:240cmx450cm Brush engine circulation:1400dk The diameter of the brush:42cm The width of the platform:2.60cm The length of the platform:3.77cm Other equipments:1p. 300lt water tank 1p. 300lt detergent tank 1p. Water pomp 1p. Detergent dosage pomp 1p. Platform floor carpet
The Delivery Period Of Carpet Cleaning Enterprises Has Reduced To Max. 24 Hours. Stainless chrome steel body The inner drum of the length of 2.2m Stainless steel drum Easy cap and cap clutching system The engine works quietly and without vibration. The pipe-type carpet wringing machine does not damage the carpet during the process thanks to its roll shape. The %98 dryness is resulted on the carpets that has been wringed with this machine. Carpet rinsing feature is also available in it. It helps to get the perfect cleaning on the fringes by preventing the dirty water flow over the fringes during the drying. The time and labour efficiency is increased. No dirt comes upon the surface of the carpet after the process. No detergent trace is left behind. No deformation like being tore apart occurs on the carpets. Carpets do not smell bad since they do not wait damp. The length of the machine:2, 4 m The length of the inner drum:2, 2 m Engine speed:1400 circulation/min. Roll speed:1200 circulation/min. Engine power:4 kw The thickness of the chrome:2, 5 mm The diameter of the entrance:1, 5 mm The capacİty of wringing the carpet:100m/h
Inner and outer drum made of 304 quality stainless steel. The countersink system with holes preventing the clothes from being damaged. The Switch System with automatic lock. The time setting providing manual control. Machines with the capacity of 30-60-90kg or over are attainable.
Stainless steel nois isolated closed (open) top washing cabin 4 or 6 units of balanced brush rollers in the washing unit revolving at high speed Adjustable glass transport speed High sensetive brushes that can wash coated glass Homogeneous brush contact fof different glass thicknesses Draying fan equipped with a heater placed in a noise-isolated housing Stainless steel water tank equipped with a heater Float-valve system for controlling the water level in the water tank Standard working direction from left to right Electrical system compliant with general safety rules.
Vinyil asetat acrilic ester copolymer used in automatic selefan machine as lamination glue .
Thermoform plastic machines
Thermoform plastic moulds
Slitting speed:-75 m/min Foil width:700 mm Min. Slitting width:15 mm Lenght/width/height:1070x1020x1100 mm Weight:650 kg Total power:2, 2 kw û 220v
Laminating machine, is reserved for lamination profiles and sheets, laminating by pvc film with hot polyurethane glue (PUR) Machine equipment and technical features: ò Monoblock in steel tank ò Total 140 different clamping cylindrical shafts ò System of submission film with one cylinder and braking system ò System of drawing glue with teflon coating ò Electronic system of centering submission film ò 92 pieces of figurative shafts with silicone and rubber covering ò Anti-static system for clearing profile area ò 6 thermo-pneumatic guns with heating regulation ò Special station for first coat ò Emergency turn off system for machine ò Digital displays showing the operating speed of the machine ò 5 meters front and 5 meters of back conveyers TECHNICAL FEATURES : Type of Folio : PVC, PP, Finish Foil Min Folio Width : 30 mm Max Folio Width : 1300 mm Profile Type to be Covered : MDF, DSP, DVP, PVC, Aluminium Profile Width : 15-1300 mm Profil Height : 250 mm Coating speed : 0-30 m/min Glue : Polyurethane hot glue DIMENSIONS : Machine frame : 6.000 mm Total height : 16.000 mm Width : 2.150 mm Height : 2.500 mm Weight : 3.750 kg POWER Main engine : 2,2 kw Hot Air Blowers : 6 x 3 kw Total Power : 36 kw Air Pressure : 6 Bar Voltage : 380 V Frequancy : 50 HZ
Shoe sole injection machine
Technical data Maximum cut Blade ° 350-width 80mm-height 80mm Max. Production/hour 500 / 600 cuttings Motors No. 2, 2 hp. 2800 rpm Hole suction + 80 mm Electric power supply 380 / 220 v Power absorbtion 3 kw Pneumatic feed 80 psi Air consumption 8 ni / 5 bar Weight 380 kg Dimensions 1200x1300x1750
Cartridge refilling machine Color and black inkjet cartridge refill machine for all models at market . 35/35/40
It is machine to adjust the mixing of pu, polysulphite and silicone type materials. This operating system is especially designed for the insulating glass production and improved. This machine can also be used as filling the cartridges by only releasing the mixing system. The mixed material can also be taken out of the gun. System works hydraulically and b component may work pneumatically if required. How to introduce the materials: A and b components seperately handled by the hydraulic system pumps. When the material is reloaded, it is necessary to empty the air inside the machine. Besides, time heaters available on specific parts to avoid the improper working under cold weather conditions. Mixing ratio: A and b component can be controlled seperately by either hydraulic system or dosing pump. The adjustment can be made as desired by any ratio figures are between 1:6 and 1:16 Mixing system: The mixers by the end of the extension output hoses mixes the materials homogenously and completely. Cleaning: It is necessary to clean and maintenance the machine after long periods of idle being of production. When the mixed material is forgotten inside the machine for a period of time, machine itself warns by the use of alert lamp. B component key is switched to the opposite direction allowing the by-pass system to fill the mixers with a component and so unwanted freeze can be avoided. Technical specifications: Mixing ratio: 1:6 / 1:16 Material output: approx 2.7 kg./min. Which may deviate according to material used Operating system: hydraulics ( a ve b compenant. B component may be pneumatic.) Operating pressure: between 250 - 450 bar Air pressure: max. 6 bar Power supply: 3 kw (380 v 59 hz.Expect the heaters) Controlling system: plc controlled Weight: 685 kg. Dimensions: 1700 x 1050 x 100 mm Weight: 685 kg. Dimensions: 1700 x 1050 x 100 mm In wooden case
The style machine is designed for professional use. It has been designed and manufactured for cutting procedures of wood, plastic material (pvc) or light alloys (aluminium profiles). On the upper table, with the upper part of the saw, strip cutting procedures for wooden panels and secondary products and aluminium and pvc profiles can be undertaken. For the cutting of plastic or wooden material with square or rectangle cross sections in blocks. For the cutting of aluminium or plastic door or window profiles with certain degrees. Cutting feature to left and right at standard 15 ª -22, 5 ª -30 ª -45 ª -90 ª 29kg, box dimensions: W : 560mm L : 450mm H : 450mm
This portable machine is used to join the corners of wooden frames. Designed for opening swallow hole to wooden frame profiles and corner assembling processes. Specially alloyed aluminium table, long-lasting paint Safety switch depending on arm movement Mitre system providing centering Automatic open-close function. Easy movement with bearing on steel mil. Axis adjustable motor and middle triangle part. Adjustable stroke screw. Carbide-tipped blade. Solid aluminium body. Automatic release after operation. Fine combining mechanism. Easily portable 11kg, box dimensions: W : 420mm L : 510mm H : 495mm
Used flat knitting machine Not standart
Car and machine spare parts with our cnc machines.
Spare parts for earthmoving equipment, machinery pins.
Construction equipment, rock auger, rock drilling bucket, casing, casing shoe, tremie pipe, tremie tie, soil auger.
