1. PRODUCT OVERVIEW VHR joints made by VinhHung Investment and Production Co., Ltd (Vinh Hung IP) is the steel strip-seal joint comprising of two steel rails with anchor bars connected to embedded bars in the pier cap of the headwall of the abutment, elastomeric strip serves as the trough for drainage and debris, nosing materials: non-shrinkage mortar or concrete with minimum compressive strength of 40MPa. There are 2 main types of VHR expansion joints identified by the cross-section of the steel rails: VHR-C steel rail expansion joint and VHR-F steel rail expansion joint. 2.PRODUCT CHARACTERISTICS Totally accommodate to longitudinal movement up to 100mm, and also vertical and transverse movement if appear. Simple in design and installation, high load bearing and durability. The joints are designed suitably for curb and median structures. Totally water-tight.� To ensure the long-lasting durability, VHF-steel strip expansion joints are protected from corrosion with methods like: coat with 2-component epoxy painting, PU-based paint (Polyurethane).., zinc-coating according to ASTM A123â?¦, and especially Al-Mg coating (Al 5% and Mg 95% ratio) which ensures the durability of 100 years. This method is proved by the brine spraying test in 6000 hours (dry-wet 8-hour cycles) according to ASTM B117 standards
1. Product Overview VHM expansion  joint made by VinhHung Investment and Production Co., Ltd (VinhHung IP) are composed of multiple steel rails in combination with support beam and special structures. VHM - modular expansion joints accommodate to longitudinal movement from160mm upwards. The expansion joints are connected to the bridge deck through the anchoring reinforced system. Rubber seal serve as the drainage trough and prevent the system from dust and debris. 2.PRODUCT CHARACTERISTICS Design and manufacture according to AASHTO LRFD, TCVN 11823 2017 standards. Allow the longitudinal displacement of up to 720mm, the vertical and horizontal displacement satisfy AASHTO standards. Be able to withstand with high loads with stable and durable structure. Provide the smooth-riding surface while absorbing the impact of heavy traffic. Each center beam is fixed with an independent supporting bar, which satisfies the requirement of the fatigue threshold C (AASHTO 2007). Be protected with high anti-corrosive coating layer and treated with anti-skid coating technology. Be totally watertight.
1. PRODUCT OVERVIEW VHM expansion joint made by VinhHung Investment and Production Co., Ltd (VinhHung IP) are composed of multiple steel rails in combination with support beam and special structures. VHM - modular expansion joints accommodate to longitudinal movement from160mm upwards. The expansion joints are connected to the bridge deck through the anchoring reinforced system. Rubber seal serve as the drainage trough and prevent the system from dust and debris. 2.PRODUCT CHARACTERISTICS Design and manufacture according to AASHTO â?? LRFD, TCVN 11823 â?? 2017 standards. Allow the longitudinal displacement of up to 720mm, the vertical and horizontal displacement satisfy AASHTO standards. Be able to withstand with high loads with stable and durable structure. Provide the smooth-riding surface while absorbing the impact of heavy traffic. Each center beam is fixed with an independent supporting bar, which satisfies the requirement of the fatigue threshold C (AASHTO 2007). Be protected with high anti-corrosive coating layer and treated with anti-skid coating technology. Be totally watertight.
1. PRODUCT OVERVIEW VHR joints made by VinhHung Investment and Production Co., Ltd (Vinh Hung IP) is the steel strip-seal joint comprising of two steel rails with anchor bars connected to embedded bars in the pier cap of the headwall of the abutment, elastomeric strip serves as the trough for drainage and debris, nosing materials: non-shrinkage mortar or concrete with minimum compressive strength of 40MPa. There are 2 main types of VHR expansion joints identified by the cross-section of the steel rails: VHR-C steel rail expansion joint and VHR-F steel rail expansion joint. 2.PRODUCT CHARACTERISTICS Totally accommodate to longitudinal movement up to 100mm, and also vertical and transverse movement if appear. Simple in design and installation, high load bearing and durability. The joints are designed suitably for curb and median structures. Totally water-tight. To ensure the long-lasting durability, VHF-steel strip expansion joints are protected from corrosion with methods like: coat with 2-component epoxy painting, PU-based paint (Polyurethane).., zinc-coating according to ASTM A123â?¦, and especially Al-Mg coating (Al 5% and Mg 95% ratio) which ensures the durability of 100 years. This method is proved by the brine spraying test in 6000 hours (dry-wet 8-hour cycles) according to ASTM B117 standards
NGHI SON AGRICULTURE PRODUCT IMPORT EXPORT CO., LTD CHILLI COMMODITY RED HOT CHILLI, BIRDS EYES CHILLI SIZEBig size:6 -8 cm Small size: 2- 5cm PACKING4, 5, 6, 7 KG per carton box or plastic tray; we also pack as your requirement. COLOR:Green or red; Be selected carefully , clean, no scratched. TEMPERATURE:50C, ventilation: 85 -95% CERTIFICATE: HEALTH, PHYTO ORIGIN:Vietnam MOQ: Full container 420RF Packing Packing from 13.5 kg or 18.5kg carton box. We also can pack as you or your market request. Shipping time: 7 -10 days after receive deposit or origin LC Our service: We export various kind of tropical fruits from Vietnam such as lime, dragon fruit, coconut, pineapple, dragon fruit, chilli. All fruits are in high quality, selected carefully follow export standard in stable capacity. We are willing to support you anytime you need. Company information: I am Linda working at NGHI SON AGRICULTURE PRODUCT IMPORT EXPORT CO., LTD. We have more experience in exporting various agricultural products and willing to support you any time. If you have interested in our products, please send me detail of your needs for the best price: Kind of fruit, Size, Packing and Quantity.
We keep supplying Joss Powder with large quantity and enhanced quality to a lot of Incense and Mosquito Coil customers all over the world, especially in India, Pakistan, Indonesia, Malaysia, Bangladesh, Nepal, etc... All of our customers are satisfied with our product quality and service as well. We hope so much to have opportunity continue serving you with our product. Our Joss Powder is made completely from red bark, green bark and leave of Litsea Glutinosa tree in the central Highland of Vietnam. Depend on the percentage of green bark, red bark and leaf, Joss Powder has different quality and there are different names. With us, the kind of Joss Powder: the bad is 9 cup, the best is 36 cup. The Joss Powder of 36 cup (highest quality) are made from pure red bark. Below table is features and terms of joss powder for your kind reference. Joss powder has variety of functionality to various manufacturing work as raw materials. Due to its excellent viscosity & adhesive properties it is used mainly as binding material in Fragrance Sticks and Mosquito Repellent Coils manufacturing industry. There are various qualities of Joss/Jigat Powder, depending on percentage of bark and leaf of Litsea glutinosa. The tabu powder of 36 cup (highest quality) are made from pure red bark. We can supply various assortments of Joss powder from low viscosity to very high quality as per client's demand. FREE SAMPLE FOR ALL CUSTOMERS OF GOODWILL. We usually pack 40 kg/50 kg for easier carrying. All bags have two liners of PE/PP as Export Worthy Standard. For Joss Powder, that's better to use container 20ft loading 18 tons. We have packaging according to customers' requirements.
1. PRODUCT OVERVIEW VHM joint made by VinhHung Investment and Production Co., Ltd (VinhHung IP) are composed of multiple steel rails in combination with supporting beams and special structural accessories. VHM - modular expansion joint accomodates to longitudinal movement from 160mm and above. The expansion joints are connected to the bridge deck through the anchoring reinforced system. Rubber seal serves as drainage trough and protect the system from dust and debris. 2. PRODUCT CHARACTERISTICS : Design and manufacture according to AASHTOLRFD, TCVN 11823 â?? 2017 standards. : Allow longitudinal movement of up to 720mm, vertical and horizontal movements are in accordance with AASHTO standards. : Be able to withstand high load with stable and durable structure. : Ensure level and smooth surface for traffic. : Each center beam is fixed with an independent supporting bar, which satisfies the requirement of the fatigue limit C (AASHTO 2007). : Protected with high anti-corrosive coating layer and treated with anti-slip coating technology. : Totally watertight. 3. TECHNICAL PARAMETERS. MODEL DISPLACEMENT MM A C MM D H MM MM MM MIN MAX MIN MAX VHM - 160 160 160 320 360 40 200 350 VHM - 240 240 240 480 420 40 280 350 VHM - 320 320 320 640 500 50 370 350 VHM - 400 400 400 800 580 50 450 350 VHM - 480 480 480 960 640 60 540 350 VHM - 560 560 560 1120 700 60 620 350 VHM - 640 640 640 1280 800 60 700 350 VHM - 720 720 720 1440 880 60 780 350 4. PROPERTIES OF SEAL A. BEARING AND SPRING NO. ITEMS UNIT REQUIREMENT STANDARD 1 Hardness Point 60 �± 5 ASTM D2240 2 Tensile strength, min Mpa 15.5 ASTM D412 3 Elongation at break, min % 350 ASTM D412 4 Deformation in Ozone, (content of Ozone in the air: 100pphm, 20%. Deformation at 38�°C x 70h No crack ASTM D1149 5 Heat resistance (100�°C x 70h) Change of hardness, max Point 0~15 ASTM D573 Change of tensile strength, max % -15 Change of elongation, max % -40
1. PRODUCT OVERVIEW VHR steel strip-seal joint made by Vinh Hung Investment and Production Co., Ltd (Vinh Hung IP) comprises of two steel rails with anchor bars connected to embedded bars in the pier cap of headwall of abutment, elastomeric strip serves as the trough for drainage and debris, nosing materials: non-shrink mortar or concrete with minimum compressive strength of 40MPa. There are 2 main types of VHR expansion joint identified by the cross section of the steel rails: VHR-C steel rail expansion joint and VHR-F steel rail expansion joint. 2. PRODUCT CHARACTERISTICS Totally accommodate to longitudinal movement up to 100mm, and also vertical and transverse movements if any. Simple in design and installation, high load capacity and durability. Designed suitably for flush curb and central reverse. Totally water-tight. To ensure the long-lasting durability, VHR steel strip expansion joints are protected from corrosion with methods such as: 2-component epoxy coating, PU-based painting (Polyurethane), hot dip galvanization according to ASTM A123 standards and especially the Al â?? Mg spraying method (at the ratio of 5% Al and 95% Mg) which ensures anti-corrosion durability of up to 100 years, proven by salt-spraying test in 6000 hours (8-hour dry-wet cycle repetition) under ASTM B117 standards. MATERIAL PARAMETERS 1. PROPERTIES OF METAL ELEMENTS ITEMS Tensile strength, min Yield strength, min Elongation, min NO. 1 2 3 REQUIREMENTS 450 345 23 UNIT MPa MPa % STANDARD ASTM A709M PROPERTIES OF RUBBER SEAL UNIT REQUIREMENTS Point Mpa 1 2 3 4 5 Hardness Tensile strength, min Ozone resistance, content of ozone in the air 100pphm, 20% deformed at 40o C x 70h Elongation at break, min Hot air aging test in 70 hours at 100o C Tensile strength change, max Elongation change, max Hardness change 65 ± 5 7 No crack 250 - 20 - 40 0 - 15 STANDARD ASTM D2240 ASTM D412 ASTM D1149 ASTM D412 ASTM D573 ASTM D573 ASTM D573 ASTM D573 Installation of joints is critical to ensure the lifespan of the expansion joint and smooth traffic. Careful preparation of machinery, equipment, and highly specialized human resources is required for the installation of high quality expansion joints. The installation method shall be strictly followed to guarantee the actual performance of the product in service. 1. After finishing pavement, cut and clean he trend, adjust embedded bars, laym reinforcement bars on site 2 . Fix the deformed bars, install the fabricated joints, add distribution bars, anchoring bars to embedded bars. 3. Cure concrete, install rubber seal, allow traffic when concrete 4. Install formworks and pour non-shrink mortar or high-strength concrete to transition section, check the leveling of surface.
Rack cabinets, locker cabinets, storage cabinets, cable tray .
Table top, decor lacquer mirror frame, lacquer bamboo bowl, lacquer wooden or bamboo tray.
Vietnam Organic Coconut Shell Bowl Product name: Natural coconut bowl Material : Coconut Shell Features : Non-toxic, non-irritation, flexible, eco-friendly,durable, lightweight. Color : Natural brown or as your request Usage : Serving foods Care instruction As usual bowls (recommend hand-washing) MOQ : 100 pcs/design Delivery time :Depend quantity, normally 15 days after receiving deposit with quantity 10.000 pcs Packing : Carton, pallet, big bag, strap or customized Trade Terms : FOB Ho Chi Minh Port?? Vietnam Special Requirements: As customer ??s requirement. HS CODE : 14049099 Packaging & Shipping : Each bowl is wrapped with craft paper or with linen bag or with your design.
USPLAS JOINT STOCK COMPANY is one of the biggest and leading Vietnam manufacturers, specializing in researching and producing Color Masterbatch, Additives, Filler Masterbatch/ Calcium Carbonate Masterbatch and plastic compound. With USPLAS brand, we are making continuous improvements in our process, products and services by exploiting the latest technology production lines, testing equipments; training and empowering our workforce for innovating new products, processes and implementing quality control system to achieve the goal of total customer satisfaction. In our company, quality is the top priority. We always try our best to gain a further quality levels which are confirmed with QC standards like TQM, 5S, ISO 14001, etc. We completely commit to always serve our esteemed customers with the highest quality products, the most reasonable price, short delivery time, sufficient quantity and the best after-sales service.
Dear Sir We are delighted to hear that you are looking to buy the kind of noodles you like We send you the best offer as follows Ingredients made from rice, to create flexibility and help better preservation, rice noodle is a new product line that food helps to diversify meals for each family and gives everyone a choice. new select. Ingredients 100 Khang Dan white rice, no preservative chemicals are used. User manual vermicelli and noodles in cold water for about 5 10 minutes Soak in boiling water for about 4 6 minutes. Take out and rinse with clean water to dry, use at will Stir-fried with shrimp, crab, meat, eggs, vegetables, spices Use with hot pot or use as fresh vermicelli. Nutrition facts, Calorles Cab 322 Calories from fat calorie 1.8 Percent daily value in daily rations Total fat total fat 0.2g Saturated fat 0g, Cholesterol omg Sodium 0.01mg Total carbohydrates 75g Surgar nutrient 2g Protein Protein 5g We hope you reply to your email as soon as possible so that we can serve you.
Wooden crafts like wood tray, wooden wall art decorative.
Plywood items: birch plywood, film faced plywood, lvl, commercial plywood, packing plywood plastics items: plastics box/tray/container/bottle/crate.
Plastic tray YM003 brand Hoa An Plastic with high quality and low price is designed and manufactured for FDI enterprises, factories in industrial zones manufacturing electronic components, auto parts, motorcycles, mechanics. create. Plastic tray YM003 size 445 x 305 x 125mm is manufactured 100% from virgin plastic beads, with UV protection. With smart designs, rich colors, bright colors, it can meet the highest requirements of all customer partners when using the product YM003 plastic tray with Hoa An Plastic brand. Hoa An Plastic Factory is promoting the application of 4.0 technology in production, with the most advanced and modern machinery and equipment system. Therefore, Hoa An Plastic can save maximum costs, produce good quality YM003 plastic trays, competitive prices, and ensure benefits for partner businesses.
Product code: WOOD PELLETS Diameter: 6-8mm Length: 3.15 - 4 cm Bulk Density: > 550 kg/m3 Ash content: < 3 Moisture: < 10% Particle size (98 Particle size (90 Particle size (50 Durability: 97-99% Net Calorific value: > 3.994 (kcal/kg) (> 16.5 MJ/kg)
HOA AN JSC is a manufacturer of plywood in Vietnam. Our factories are in Phu Tho/Thanh Hoa/ Lang Son province (the north of Vietnam). We are specializing in Furniture plywood/Film-faced plywood/Packing plywood/ LVL and Wood Pellets with competitive prices and good quality for the global market. Thickness: Custom as customers' request Length: greater than 4000mm Face/back: Pine/ Styrax/ Mixed light hardwood... Core: Pine, acacia,mixed hardwood,.. Glue: E0/E1/E2 Moisture content: greater than15% ) Usage: Furniture, pallets
HOA AN JSC is a manufacturer of plywood in Vietnam. Our factories are in Phu Tho/Thanh Hoa/ Lang Son province (the north of Vietnam). We are specializing in Furniture plywood/Film-faced plywood/Packing plywood/ LVL and Wood Pellets with competitive prices and good quality for the global market. Thickness: 2.0/2.5/4.6/4.8/6/7/8/11/12/14/17/18/19/20mm Grade: AB/BC Face/back: Bintangor/Okume & Styrax, Whitewood Core: Mixed wood (acacia, styrax, mixed light hardwood...) Glue: MR/E2 Tolerance thickness: +/- 0.5mm Moisture content: greater than 15% Usage: Packaging materials (Pallets, Wooden box, Wooden crates,..)
HOA AN JSC is a manufacturer of plywood in Vietnam. Our factories are in Phu Tho/Thanh Hoa/ Lang Son province (the north of Vietnam). We are specializing in Furniture plywood/Film-faced plywood/Packing plywood/ LVL and Wood Pellets with competitive prices and good quality for the global market. Thickness: 11/11.5/12/15/17/18 mm Size: 4*8, 3*6 Grade: Film-face1 side/2 sides Face/back: Dongwha film, Dynea film, Core: Eucalyptus, acacia, rubber, Asia hardwood Glue: WBP glue (Melamine 15%-20%) Reuse time: 6-25 times Tolerance thickness: +/- 0.5mm Moisture content: greater than 15% Usage: Concrete forming for construction
