Tld vietnam is one of leading manufacturers & suppliers of calcium carbonate from vietnam. With many year experiences in the field, tld vietnam is capable of supplying various customers in different industries with suitable quality calcium carbonate. The companys main markets are forest products (paper, board and tissue), polymers (film, sheet, pipe & profile, cable, flooring, rubber, elastomer and thermoset), building materials (paints, coatings, adhesives & sealants, tiles and ceramics) as well as life science (feed, personal care, agriculture and environment ) -
Tld vietnam is one of leading manufacturers & suppliers of calcium carbonate from vietnam. With many year experiences in the field, tld vietnam is capable of supplying various customers in different industries with suitable quality calcium carbonate. The company?s main markets are forest products (paper, board and tissue), polymers (film, sheet, pipe & profile, cable, flooring, rubber, elastomer and thermoset), building materials (paints, coatings, adhesives & sealants, tiles and ceramics) as well as life science (feed, personal care, agriculture and environment) -
1. PRODUCT OVERVIEW VHF finger expansion joint made by Vinh Hung Investment and Production Co., Ltd (VinhHung IP), includes 2 types: Cantilever VHF-C and over-gap VHF-O, according to: AASHTO LRFD standards ASTM D354292 (2003) standards VHFC and VHFO are integrally manufactured with high accuracy finger plates and accessories such as bolts, rubber sheet/water prevention steel plates which help facilitate new construction and installation as well as inspection and maintenance works in service. VHFC and VHFO accommodate to medium movement to big movement and can be used for both straight and skew bridges. 2. PRODUCT CHARACTERISTICS Totally accommodate to medium and large longitudinal movements, and also vertical and transversal movement if any. Simple installation, maintenance and replacement, which allows to replace individual finger plates in short period of time and for each lane. High loading resistance capacity, especially the moving load. Also available for skew bridges. Rubber seal system is designed to be totally water-tight and prevent dust and debris. Can be designed to be compatible with different thicknesses of bridge decks. To ensure the long-lasting durability, VHF finger expansion joints are protected from corrosion with methods such as: 2-component epoxy coating, PUbased painting (Polyurethane), hot dip galvanization according to ASTM A123 standards and especially the Al Mg spraying method (at the ratio of 5% Al and 95% Mg) which ensures anti-corrosion durability of up to 100 years, proven by salt-spraying test in 6000 hours (8-hour dry-wet cycle repetition) under ASTM B117 standards. DIMENSIONS OF FINGER EXPANSION JOINT VHF-C15 ~ VHF-C30 (WITHOUT BOLT) MODEL DISPLACEMENT d A D C H min max min max VHF-C15 15 22 190 205 25 40 300 150 VHF-C20 20 22 230 250 30 50 300 150 VHF-C30 30 25 245 275 30 60 300 150
Vinh Hung specializes in manufacturing safety parapet for transport, civil and industrial works. Parapet products are manufactured according to the typical design of the company or according to customer drawings. Our Parapet products conform to the standards: BS EN 1317, TCVN 11823-13: 2017. All parts of the parapet are processed on modern machinery lines, high precision, in order to facilitate the installation and durability of the product. Parapets are the outermost of the bridge deck. Handrails are used to protect vehicles and people when a collision occurring and direct the vehicles on bridges. Parapets are mainly used steel, aluminum alloy, wood, reinforced concrete. Installed on the bridge concrete barrier, parapets donâ??t only ensure traffic safety but also increase the aesthetics of the whole bridge. Parapets consist of column system, handrails and the middle bar which are hot-dip galvanized or electrostatic painting with multiple types, sizes and designs. Parapets aesthetics are required very high when designing, especially the bridges in the city area or in the important roads. All details of the parapet are processed on modern machinery lines with high precision and skilled workers to improve job efficiency as well as the durable installation of products. Vinhhung parapets are hot-dip galvanized according to AASHTO M111 (ASTM A123) which would bring the maximum life for products. The high quality of Vinhhung parapets is affirmed when reaching out to the region with export orders to projects in Bruneiâ?¦
VHB pot bearing made by Vinh Hung Investment and Production Company Limited (Vinh Hung IP) are in compliance with standards (TCVN 10268:2014, AASHTO LRFD: 2007, Section 18, ASTM D521203, BS5400, EN1337, KS4420). VHB pot bearing is capable of withstanding high loads, displacements and wide angle rotation. This type of bearing is suitable for middle-range span structure, continuous bridge structure etc. with a load capacity of 60000kN or above depending on projects requirements. VHB pot bearing has well-shaped structure, superior design, which is convenient for installation and maintenance during operation PRODUCT CHARACTERISTICS VHB pot bearing is comprised of 4 main parts: top plate, piston, pot plate and elastomeric pad. The elastomeric pad is placed inside of pot plate, under thepressure of the load, the elastomeric pad experiences the temporary deformation inside the pot plate volume, it is capable of withstanding the forces and allows the movement as well as rotation along horizontal axis. Piston and pot plate work as the connecting parts between the structures. Besides, the plus guiding bar can be designed to limit or allow the movements as required from the structures. Pot bearing is divided into 2 main types: Fixed pot bearing and sliding pot bearing. Fixed pot bearing: The bearing only allows the head of structure to have rotary movement and transfers the pressure through a fixed point. Sliding pot bearing: This type of bearing, including free sliding bearing and guided sliding bearing, allows the head to have both rotary movements and transversally or multidirectional movements. To ensure the long-life durability, VHB pot bearing is protected against corrosion by the following methods: two-component epoxy coat, PU-based painting (Polyurethane), hot dip galvanization according to ASTM A123 standards and especially the Al â?? Mg spraying method (at the ratio of 5% Al and 95% Mg) which ensures the anti-corrosion durability of up to 100 years, proven by salt-spraying test in 6000 hours (8-hour dry-wet cycle repetition) under ASTM B117 standards.
1. PRODUCT OVERVIEW VHB pot bearing made by Vinh Hung Investment and Production Company Limited (Vinh Hung IP) are in compliance with standards (TCVN 10268:2014, AASHTO LRFD: 2007, Section 18, ASTM D5212â??03, BS5400, EN1337, KS4420). VHB pot bearing is capable of withstanding high loads, displacements and wide angle rotation. This type of bearing is suitable for middle-range span structure, continuous bridge structure etc. with a load capacity of 60000kN or above depending on projects requirements. VHB pot bearing has well-shaped structure, superior design, which is convenient for installation and maintenance during operation PRODUCT CHARACTERISTICS VHB pot bearing is comprised of 4 main parts: top plate, piston, pot plate and elastomeric pad. The elastomeric pad is placed inside of pot plate, under the pressure of the load, the elastomeric pad experiences the temporary deformation inside the pot plate volume, it is capable of withstanding the forces and allows the movement as well as rotation along horizontal axis. Piston and pot plate work as the connecting parts between the structures. Besides, the plus guiding bar can be designed to limit or allow the movements as required from the structures. Pot bearing is divided into 2 main types: Fixed pot bearing and sliding pot bearing. Fixed pot bearing: The bearing only allows the head of structure to have rotary movement and transfers the pressure through a fixed point. Sliding pot bearing: This type of bearing, including free sliding bearing and guided sliding bearing, allows the head to have both rotary movements and transversally or multidirectional movements. To ensure the long-life durability, VHB pot bearing is protected against corrosion by the following methods two-component epoxy coat, PU-based painting (Polyurethane), hot dip galvanization according to ASTM A123 standards and especially the Al Mg spraying method (at the ratio of 5% Al and 95% Mg) which ensures the anti-corrosion durability of up to 100 years, proven by salt-spraying test in 6000 hours (8-hour dry-wet cycle repetition) under ASTM B117
Vinh Hung specializes in manufacturing safety parapet for transport, civil and industrial works. Parapet products are manufactured according to the typical design of the company or according to customer drawings. Our Parapet products conform to the standards: BS EN 1317, TCVN 11823-13: 2017. All parts of the parapet are processed on modern machinery lines, high precision, in order to facilitate the installation and durability of the product. Parapets are the outermost of the bridge deck. Handrails are used to protect vehicles and people when a collision occurring and direct the vehicles on bridges. Parapets are mainly used steel, aluminum alloy, wood, reinforced concrete. Installed on the bridge concrete barrier, parapets donot only ensure traffic safety but also increase the aesthetics of the whole bridge. Parapets consist of column system, handrails and the middle bar which are hot-dip galvanized or electrostatic painting with multiple types, sizes and designs. Parapets aesthetics are required very high when designing, especially the bridges in the city area or in the important roads. All details of the parapet are processed on modern machinery lines with high precision and skilled workers to improve job efficiency as well as durable installation of products. Vinh Hung parapets are hot-dip galvanized according to AASHTO M111 (ASTM A123) which would bring the maximum life for products. The high quality of Vinh Hung parapets is affirmed when reaching out to the region with export orders to projects in Brunei.
1. Product Overview VHC spherical Bearings/ Bridge bearing manufactured by Vinh Hung Investment and Production Company Limited (Vinh Hung IP) are capable of withstanding the high loads and movements suitable for structures requiring the rotary angle equal or bigger than 0.015 rad in all directions. VHC spherical bearings are designed and manufactured according to current standards such as: TCVN 11823, AASHTO LRFD, ASTM D5977, EN 1337, 2. PRODUCT CHARACTERISTICS VHC spherical bearings/ bridge bearing possesses a bottom plate (6) which has a PTFE sliding plate (4) on it is upper curved surface. A convex calotte (5) is placed on top of this, which, thanks to it is polished hard-chromium plated surface, can slide within the lower part with low friction, thus facilitating rotations about every axis. A second sliding plate of PTFE (4) is recessed into the upper surface of the calotte. Together with the upper plate (2) above it, this accommodates longitudinal and/or transverse sliding movements of the superstructure, if required. To reduce sliding resistance to a minimum, the lower surface of the top plate features a polished stainless steel sheet. In the case of bearings which should allow movement along one axis only, the direction of movement is controlled by guiding bars (3). In the case of fixed bearings, the top plate does not have a stainless steel sheet. The bearing is connected to the superstructure and the substructure by means of anchor dowels (1) or threaded sleeves (depending on design), or alternatively by means of separate anchor plates with shear studs. To ensure the long-life durability, VHC spherical bearings are protected against corrosion by the following methods: coating with two-component epoxy, PU-based painting (Polyurethane), hot-dip galvanization according to ASTM A123 standards and especially the Al-Mg spray coating method (at the ratio of 5% Al and 95% Mg) which ensure the anti-corrosion durability of up to 100 years, this method is proved by the salt-spraying test in 6000 hours (8-hour dry-wet cycle) according to ASTM B117
1. Product Overview VHC spherical Bearings/ Bridge bearing manufactured by Vinh Hung Investment and Production Company Limited (Vinh Hung IP) are capable of withstanding the high loads and movements suitable for structures requiring the rotary angle equal or bigger than 0.015 rad in all directions. VHC spherical bearings are designed and manufactured according to current standards such as:TCVN 11823, AASHTO LRFD, ASTM D5977, EN 1337, 2. Product Characteristics VHC spherical bearings/ bridge bearing possesses a bottom plate (6) which has a PTFE sliding plate (4) on it is upper curved surface. A convex calotte (5) is placed on top of this, which, thanks to it is polished hard-chromium plated surface, can slide within the lower part with low friction, thus facilitating rotations about every axis. A second sliding plate of PTFE (4) is recessed into the upper surface of the calotte. Together with the upper plate (2) above it, this accommodates longitudinal and/or transverse sliding movements of the superstructure, if required. To reduce sliding resistance to a minimum, the lower surface of the top plate features a polished stainless steel sheet. In the case of bearings which should allow movement along one axis only, the direction of movement is controlled by guiding bars (3). In the case of fixed bearings, the top plate does not have a stainless steel sheet. The bearing is connected to the superstructure and the substructure by means of anchor dowels (1) or threaded sleeves (depending on design), or alternatively by means of separate anchor plates with shear studs. To ensure the long-life durability, VHC spherical bearings are protected against corrosion by the following methods: coating with two-component epoxy, PU-based painting (Polyurethane), hot-dip galvanization according to ASTM A123 standards and especially the Al-Mg spray coating method (at the ratio of 5% Al and 95% Mg) which ensure the anti-corrosion durability of up to 100 years, this method is proved by the salt-spraying test in 6000 hours (8-hour dry-wet cycle) according to ASTM B117
1. PRODUCT OVERVIEW VHC spherical Bearings/ Bridge bearing manufactured by Vinh Hung Investment and Production Company Limited (Vinh Hung IP) are capable of withstanding the high loads and movements suitable for structures requiring the rotary angle equal or bigger than 0.015 rad in all directions. VHC spherical bearings are designed and manufactured according to current standards such as: TCVN 11823, AASHTO LRFD, ASTM D5977, EN 1337, â?¦ 2. PRODUCT CHARACTERISTICS VHC spherical bearings/ bridge bearing possesses a bottom plate (6) which has a PTFE sliding plate (4) on it is upper curved surface. A convex calotte (5) is placed on top of this, which, thanks to it is polished hard-chromium plated surface, can slide within the lower part with low friction, thus facilitating rotations about every axis. A second sliding plate of PTFE (4) is recessed into the upper surface of the calotte. Together with the upper plate (2) above it, this accommodates longitudinal and/or transverse sliding movements of the superstructure, if required. To reduce sliding resistance to a minimum, the lower surface of the top plate features a polished stainless steel sheet. In the case of bearings which should allow movement along one axis only, the direction of movement is controlled by guiding bars (3). In the case of fixed bearings, the top plate does not have a stainless steel sheet. The bearing is connected to the superstructure and the substructure by means of anchor dowels (1) or threaded sleeves (depending on design), or alternatively by means of separate anchor plates with shear studs. To ensure the long-life durability, VHC spherical bearings are protected against corrosion by the following methods: coating with two-component epoxy, PU-based painting (Polyurethane), hot-dip galvanization according to ASTM A123 standards and especially the Al-Mg spray coating method (at the ratio of 5% Al and 95% Mg) which ensure the anti-corrosion durability of up to 100 years, this method is proved by the salt-spraying test in 6000 hours (8-hour dry-wet cycle) according to ASTM B117
1. PRODUCT OVERVIEW VHC spherical Bearings/ Bridge bearing manufactured by Vinh Hung Investment and Production Company Limited (Vinh Hung IP) are capable of withstanding the high loads and movements suitable for structures requiring the rotary angle equal or bigger than 0.015 rad in all directions. VHC spherical bearings are designed and manufactured according to current standards such as:� TCVN 11823, AASHTO LRFD, ASTM D5977, EN 1337, 2.PRODUCT CHARACTERISTICS VHC spherical bearings/ bridge bearing possesses a bottom plate (6) which has a PTFE sliding plate (4) on it is upper curved surface. A convex calotte (5) is placed on top of this, which, thanks to it is polished hard-chromium plated surface, can slide within the lower part with low friction, thus facilitating rotations about every axis. A second sliding plate of PTFE (4) is recessed into the upper surface of the calotte. Together with the upper plate (2) above it, this accommodates longitudinal and/or transverse sliding movements of the superstructure, if required. To reduce sliding resistance to a minimum, the lower surface of the top plate features a polished stainless steel sheet. In the case of bearings which should allow movement along one axis only, the direction of movement is controlled by guiding bars (3). In the case of fixed bearings, the top plate does not have a stainless steel sheet. The bearing is connected to the superstructure and the substructure by means of anchor dowels (1) or threaded sleeves (depending on design), or alternatively by means of separate anchor plates with shear studs. To ensure the long-life durability, VHC spherical bearings are protected against corrosion by the following methods: coating with two-component epoxy, PU-based painting (Polyurethane), hot-dip galvanization according to ASTM A123 standards and especially the Al-Mg spray coating method (at the ratio of 5% Al and 95% Mg) which ensure the anti-corrosion durability of up to 100 years, this method is proved by the salt-spraying test in 6000 hours (8-hour dry-wet cycle) according to ASTM B117
PRODUCT OVERVIEW VHB pot bearing made by Vinh Hung Investment and Production Company Limited (Vinh Hung IP) are in compliance with standards (TCVN 10268:2014, AASHTO LRFD: 2007 Section 18, ASTM D521203, BS5400, EN1337, KS4420). VHB pot bearing is capable of withstanding high loads, displacements and wide angle rotation. This type of bearing is suitable for middle-range span structure, continuous bridge structure etc. with a load capacity of 60000kN or above depending on projects requirements. VHB pot bearing has well-shaped structure, superior design, which is convenient for installation and maintenance during operation 2. PRODUCT CHARACTERISTICS VHB pot bearing is comprised of 4 main parts: top plate, piston, pot plate and elastomeric pad. The elastomeric pad is placed inside of pot plate, under the pressure of the load, the elastomeric pad experiences the temporary deformation inside the pot plate volume, it is capable of withstanding the forces and allows the movement as well as rotation along horizontal axis. Piston and pot plate work as the connecting parts between the structures. Besides, the plus guiding bar can be designed to limit or allow the movements as required from the structures. Pot bearing is divided into 2 main types: Fixed pot bearing and sliding pot bearing. Fixed pot bearing: The bearing only allows the head of structure to have rotary movement and transfers the pressure through a fixed point. Sliding pot bearing: This type of bearing, including free sliding bearing and guided sliding bearing, allows the head to have both rotary movements and transversally or multidirectional movements. To ensure the long-life durability, VHB pot bearing is protected against corrosion by the following methods: two-component epoxy coat, PU-based painting (Polyurethane), hot dip galvanization according to ASTM A123 standards and especially the Al Mg spraying method (at the ratio of 5% Al and 95% Mg) which ensures the anti-corrosion durability of up to 100 years, proven by salt-spraying test in 6000 hours (8-hour dry-wet cycle repetition) under ASTM B117 standards Dimensions of upper plate in longitudinal direction Dimension of center point of anchor bolts of the upper plate on longitudinal direction B: Dimension of the upper plate on transverse direction Dimension of center point of anchor bolts of the upper
1. PRODUCT OVERVIEW VHR steel strip-seal joint made by Vinh Hung Investment and Production Co., Ltd (Vinh Hung IP) comprises of two steel rails with anchor bars connected to embedded bars in the pier cap of headwall of abutment, elastomeric strip serves as the trough for drainage and debris, nosing materials: non-shrink mortar or concrete with minimum compressive strength of 40MPa. There are 2 main types of VHR expansion joint identified by the cross section of the steel rails: VHR-C steel rail expansion joint and VHR-F steel rail expansion joint. 2. PRODUCT CHARACTERISTICS Totally accommodate to longitudinal movement up to 100mm, and also vertical and transverse movements if any. Simple in design and installation, high load capacity and durability. Designed suitably for flush curb and central reverse. Totally water-tight. To ensure the long-lasting durability, VHR steel strip expansion joints are protected from corrosion with methods such as: 2-component epoxy coating, PU-based painting (Polyurethane), hot dip galvanization according to ASTM A123 standards and especially the Al â?? Mg spraying method (at the ratio of 5% Al and 95% Mg) which ensures anti-corrosion durability of up to 100 years, proven by salt-spraying test in 6000 hours (8-hour dry-wet cycle repetition) under ASTM B117 standards. MATERIAL PARAMETERS 1. PROPERTIES OF METAL ELEMENTS ITEMS Tensile strength, min Yield strength, min Elongation, min NO. 1 2 3 REQUIREMENTS 450 345 23 UNIT MPa MPa % STANDARD ASTM A709M PROPERTIES OF RUBBER SEAL UNIT REQUIREMENTS Point Mpa 1 2 3 4 5 Hardness Tensile strength, min Ozone resistance, content of ozone in the air 100pphm, 20% deformed at 40o C x 70h Elongation at break, min Hot air aging test in 70 hours at 100o C Tensile strength change, max Elongation change, max Hardness change 65 ± 5 7 No crack 250 - 20 - 40 0 - 15 STANDARD ASTM D2240 ASTM D412 ASTM D1149 ASTM D412 ASTM D573 ASTM D573 ASTM D573 ASTM D573 Installation of joints is critical to ensure the lifespan of the expansion joint and smooth traffic. Careful preparation of machinery, equipment, and highly specialized human resources is required for the installation of high quality expansion joints. The installation method shall be strictly followed to guarantee the actual performance of the product in service. 1. After finishing pavement, cut and clean he trend, adjust embedded bars, laym reinforcement bars on site 2 . Fix the deformed bars, install the fabricated joints, add distribution bars, anchoring bars to embedded bars. 3. Cure concrete, install rubber seal, allow traffic when concrete 4. Install formworks and pour non-shrink mortar or high-strength concrete to transition section, check the leveling of surface.
Hello everyone, I'm sarah from kego company in vietnam. We are well-known for exporter, distributor, supplier and trading company high quality high grade calcium carbonate powder in hanoi, thu do ha noi, vietnam, which can be used widely in plastic, masterbatch, paper, paint manufacturing industries. Our caco3 powder was exploited from yenbai, vietnam - the mines here are considered as the best source of calcium carbonate in asia. So that, you can totally believe in the quality. In addition, we can supply caco3 powder at the cheapest prices. In our product list, all materials are of top grade(500 to more than 2500 mesh) with d97 = 8-70 micron as per request. Our calcium carbonate powder are completely perfectly used as fillerimprover in rubber, paint, paper, industrial plastic, ink producing, pharmacyfood grade, animal feed, daily chemical, ceramic sand other adhesive. **** physical analysis: Whiteness: 98% min Brightness: 96% min Hardness: 3 moh Moisture: 0.2% Oil absorption: 24g100g caco3 Density: 2.65 - 2.7gcm3 Ph: 8 - 9 *** chemical analysis: Caco3: 98, 5% min Fe2o3: 0, 02% max Mgo: 0, 08% max Sio2: 0, 08% max Al2o3: 0, 3% max *** others information: - Packing: by pp bags 25kg, without pallet - Payment terms: lc at sight or tt with 50% as a deposit in advance - Delivery time: 7 days upon the receipt of deposit or lc from bank - Moq: 4x20dc (26mt20dc container) -
Hello everyone, I'm sarah from kego company in vietnam. We are well-known for exporter, distributor, supplier and trading company high quality high grade calcium carbonate powder in hanoi, thu do ha noi, vietnam, which can be used widely in plastic, masterbatch, paper, paint manufacturing industries. Our caco3 powder was exploited from yenbai, vietnam - the mines here are considered as the best source of calcium carbonate in asia. So that, you can totally believe in the quality. In addition, we can supply caco3 powder at the cheapest prices. In our product list, all materials are of top grade(500 to more than 2500 mesh) with d97 = 8-70 micron as per request. Our calcium carbonate powder are completely perfectly used as fillerimprover in rubber, paint, paper, industrial plastic, ink producing, pharmacyfood grade, animal feed, daily chemical, ceramic sand other adhesive. **** physical analysis: Whiteness: 98% min Brightness: 96% min Hardness: 3 moh Moisture: 0.2% Oil absorption: 24g100g caco3 Density: 2.65 - 2.7gcm3 Ph: 8 - 9 *** chemical analysis: Caco3: 98, 5% min Fe2o3: 0, 02% max Mgo: 0, 08% max Sio2: 0, 08% max Al2o3: 0, 3% max *** others information: - Packing: by pp bags 25kg, without pallet - Payment terms: lc at sight or tt with 50% as a deposit in advance - Delivery time: 7 days upon the receipt of deposit or lc from bank - Moq: 4x20dc (26mt20dc container) -
Hello everyone, I'm sarah from kego company in vietnam. We are well-known for exporter, distributor, supplier and trading company high quality high grade calcium carbonate powder in hanoi, thu do ha noi, vietnam, which can be used widely in plastic, masterbatch, paper, paint manufacturing industries. Our caco3 powder was exploited from yenbai, vietnam - the mines here are considered as the best source of calcium carbonate in asia. So that, you can totally believe in the quality. In addition, we can supply caco3 powder at the cheapest prices. In our product list, all materials are of top grade(500 to more than 2500 mesh) with d97 = 8-70 micron as per request. Our calcium carbonate powder are completely perfectly used as filler improver in rubber, paint, paper, industrial plastic, ink producing, pharmacy food grade, animal feed, daily chemical, ceramic sand other adhesive. **** physical analysis: Whiteness: 98% min Brightness: 96% min Hardness: 3 moh Moisture: 0.2% Oil absorption: 24g100g caco3 Density: 2.65 - 2.7gcm3 Ph: 8 - 9 *** chemical analysis: Caco3: 98, 5% min Fe2o3: 0, 02% max Mgo: 0, 08% max Sio2: 0, 08% max Al2o3: 0, 3% max *** others information: - Packing: by pp bags 25kg, without pallet - Payment terms: lc at sight or tt with 50% as a deposit in advance - Delivery time: 7 days upon the receipt of deposit or lc from bank - Moq: 4x20dc (26mt20dc container) -
Hello everyone, I'm sarah from kego company in vietnam. We are well-known for exporter, distributor, supplier and trading company high quality high grade calcium carbonate powder in hanoi, thu do ha noi, vietnam, which can be used widely in plastic, masterbatch, paper, paint manufacturing industries. Our caco3 powder was exploited from yenbai, vietnam - the mines here are considered as the best source of calcium carbonate in asia. So that, you can totally believe in the quality. In addition, we can supply caco3 powder at the cheapest prices. In our product list, all materials are of top grade(500 to more than 2500 mesh) with d97 = 8-70 micron as per request. Our calcium carbonate powder are completely perfectly used as fillerimprover in rubber, paint, paper, industrial plastic, ink producing, pharmacyfood grade, animal feed, daily chemical, ceramic sand other adhesive. **** physical analysis: Whiteness: 98% min Brightness: 96% min Hardness: 3 moh Moisture: 0.2% Oil absorption: 24g100g caco3 Density: 2.65 â?? 2.7gcm3 Ph: 8 - 9 *** chemical analysis: Caco3: 98, 5% min Fe2o3: 0, 02% max Mgo: 0, 08% max Sio2: 0, 08% max Al2o3: 0, 3% max *** others information: - Packing: by pp bags 25kg, without pallet - Payment terms: lc at sight or tt with 50% as a deposit in advance - Delivery time: 7 days upon the receipt of deposit or lc from bank - Moq: 4x20â??dc (26mt20dc container) -
Hello everyone, I'm sarah from kego company in vietnam. We are well-known for exporter, distributor, supplier and trading company high quality high grade calcium carbonate powder in hanoi, thu do ha noi, vietnam, which can be used widely in plastic, masterbatch, paper, paint manufacturing industries. Our caco3 powder was exploited from yenbai, vietnam - the mines here are considered as the best source of calcium carbonate in asia. So that, you can totally believe in the quality. In addition, we can supply caco3 powder at the cheapest prices. In our product list, all materials are of top grade(500 to more than 2500 mesh) with d97 = 8-70 micron as per request. Our calcium carbonate powder are completely perfectly used as fillerimprover in rubber, paint, paper, industrial plastic, ink producing, pharmacyfood grade, animal feed, daily chemical, ceramic sand other adhesive. **** physical analysis: Whiteness: 98% min Brightness: 96% min Hardness: 3 moh Moisture: 0.2% Oil absorption: 24g100g caco3 Density: 2.65 â?? 2.7gcm3 Ph: 8 - 9 *** chemical analysis: Caco3: 98, 5% min Fe2o3: 0, 02% max Mgo: 0, 08% max Sio2: 0, 08% max Al2o3: 0, 3% max *** others information: - Packing: by pp bags 25kg, without pallet - Payment terms: lc at sight or tt with 50% as a deposit in advance - Delivery time: 7 days upon the receipt of deposit or lc from bank - Moq: 4x20â??dc (26mt/20dc container) -
Hello everyone, I'm sarah from kego company in vietnam. We are well-known for exporter, distributor, supplier and trading company high quality high grade calcium carbonate powder in hanoi, thu do ha noi, vietnam, which can be used widely in plastic, masterbatch, paper, paint manufacturing industries. Our caco3 powder was exploited from yenbai, vietnam - the mines here are considered as the best source of calcium carbonate in asia. So that, you can totally believe in the quality. In addition, we can supply caco3 powder at the cheapest prices. In our product list, all materials are of top grade(500 to more than 2500 mesh) with d97 = 8-70 micron as per request. Our calcium carbonate powder are completely perfectly used as fillerimprover in rubber, paint, paper, industrial plastic, ink producing, pharmacyfood grade, animal feed, daily chemical, ceramic sand other adhesive. **** physical analysis: Whiteness: 98% min Brightness: 96% min Hardness: 3 moh Moisture: 0.2% Oil absorption: 24g100g caco3 Density: 2.65 â?? 2.7gcm3 Ph: 8 - 9 *** chemical analysis: Caco3: 98, 5% min Fe2o3: 0, 02% max Mgo: 0, 08% max Sio2: 0, 08% max Al2o3: 0, 3% max *** others information: - Packing: by pp bags 25kg, without pallet - Payment terms: lc at sight or tt with 50% as a deposit in advance - Delivery time: 7 days upon the receipt of deposit or lc from bank - Moq: 4x20â??dc (26mt20dc container) -
Hello everyone, I'm Sarah from KEGO Company in Vietnam. We are well-known for Exporter, Distributor, Supplier and Trading Company high quality High Grade Calcium Carbonate Powder in Hanoi, Thu Do Ha Noi, Vietnam, which can be used widely in Plastic, Masterbatch, Paper, Paint manufacturing industries. Our CaCO3 powder was exploited from Yenbai, Vietnam - the mines here are considered as the BEST source of calcium carbonate in Asia. So that, you can totally believe in the quality. In addition, we can supply CaCO3 powder at the cheapest prices. In our product list, all materials are of top grade(500 to more than 2500 mesh) with D97 = 8-70 micron as per request. Our Calcium Carbonate powder are completely perfectly used as filler/improver in Rubber, Paint, Paper, Industrial plastic, Ink producing, Pharmacy/food grade, Animal feed, Daily chemical, Ceramic sand other adhesive. **** Physical Analysis: Whiteness: 98% Min Brightness: 96% Min Hardness: 3 Moh Moisture: 0.2% Oil Absorption: 24g/100g CaCO3 Density: 2.65 â?? 2.7g/cm3 PH: 8 - 9 *** Chemical Analysis: CaCO3: 98,5% Min Fe2O3: 0,02% Max MgO: 0,08% Max SiO2: 0,08% Max Al2O3: 0,3% Max *** Others information: Packing: by PP bags 25kg, without pallet Payment terms: L/C at sight or T/T with 50% as a deposit in advance Delivery time: 7 days upon the receipt of deposit or L/C from bank MOQ: 4x20â??DC (26MT/20DC container)