J series of 201 stainless steel | J1, J2, J3, J4, J5 J1: The carbon content is slightly higher than J4, and the copper content is lower than J4. Its processing performance is not as good as J4 material. It is suitable for ordinary shallow deep drawing and large angle deep drawing products such as decorative panels, bathroom products, sinks, and product pipes. J2, J5: Decorative tubes are easy to process, high hardness (both above 96�°), polished and beautiful, but they are easy to burst when used for square tubes or curved tubes (90�°). In terms of flat panel, due to its high hardness, the surface of the panel is more beautiful, and surface treatment such as frosting, polishing, and color plating can be carried out. But the biggest problem is bending, bending is easy to break, planing is easy to burst, so the ductility is not good. J3: High carbon, low chromium and low copper, but because of its high carbon content and low copper content, the material is slightly harder, so it is not suitable for bending with a slightly stronger strength. Compared with 201 stainless steel J1 material, the ductility is not so good, and it is easier to rust in the same environment. 201 stainless steel coil In the field of narrow bands, the emergence of 201 stainless steel J3 can better meet the requirements of pipe manufacturers for corrosion resistance and deformation. Because it can reduce the cost of raw materials for pipe manufacturers, it is sought after by pipe manufacturers in the narrowband field. J3 material is easy to process in veneer, but not difficult. The master of the processing factory said that he used J3 material to bend the board, and there would be an inner seam after it was broken (for black titanium, color board series, sanding board, when it is broken apart, there will be an inner seam when folding). The material of the sink has been bent 90 degrees, and it will not work if it continues. J4: The material of J4 is a relatively high-end variety in the J series of 201 stainless steel. It is suitable for deep drawing products with small angles. Most of the products that need deep drawing and salt spray test will choose it. Such as sinks, kitchen utensils, bathroom products, kettles, thermos cups, door hinges, pots, etc.
Our factory has been manufacturing all kinds of aluminum profile and parts for 20 years until now. Aluminum Frame for Display Panel 6063-5 Extrusion Aluminum Profile Bending Deep Processing CNC Deep Processing Anodized
Aluminum ceiling tile is widely used as wall decoration. Foshan Beauty East Decoration Materials Co., Ltd. is a professional manufacturer of aluminum composite panel since 2001. The size of aluminum ceiling tile can be 600*600MM, 300*300MM, 600*1200MM. The panel thickness can be 0.40MM, 0.5MM, 0.6MM, 0.7MM, 0.8MM, 0.9MM, 1.0MM. The color is usually in white, but we also have wooden color or other colors.
1.Insert a relevant card for power 2.10 to 15 seconds power cut delay after withdraw the card 3.Led indication and pc isolation material 4.Eu and uk standard in stallation 5.Suitable for working with construction automation systerm, energy management 6.Up to 20-30% energy saving, the same card for opening the door and gain power Color for reference:ivory(the default color)grey, siler, and black Voltage:90-120v/190-240v ac 50hz Maximum load:16a(30a relay) Dimension:86*86*46mm
Aluminum alloy,A1101, a3003, a5052 Foil thickness,0.04, 0.05, 0.06, 0.07, 0.08, 0.1, 0.2 Core's cell size,1-30mmm Max width of aluminum foil,1600mm Specification of normal aluminum honeycomb core Side length (mm),A=4,A=5,A=6,A=7.5,A=10,A=12,A=15,A=20,A=30 Cell size (inch),1/4,1/3,3/8,1/2,3/4,4/5,1,1,2 5layers carboards;plywood cases, wooden pallets etc, ajustable as the customer required
Fenglu aluminum supplies high quality of aluminum profiles such as window profiles, industrial profiles, curtain wall profiles, thermal barrier profiles and so on in different kinds of finishes up to customers' needs. Foam plastic, shrinkage plastic.
Certification: iso9001 Model number: decorative aluminum profile Place of origin: guangdong china Brand name: golden Material: 6063.6061. Minimum order quantity: 500kg / 1x20f+fcl Deep process: the anodizing, chemical polishing, mechanical polishing, electro-plating, powder coating, fluorine carbon coating, wooden grain are available ; all the aluminum profiles can be made according to your requirement. Delivery time: 15 days for molds making & 15 days for order production Payment terms: tt or l/c at sight.
Certification:ISO9001 Model Number:Decorative Aluminium Profile Place of Origin:GuangDong China Brand Name:Golden Material: 6063.6061. Minimum Order Quantity: 500kg / 1x20f+FCL Deep Process: theAnodizing,Chemical Polishing,Mechanical Polishing,Electro-plating,Powder Coating, Fluorine Carbon Coating,Wooden Grain are available ; All the aluminium profiles can be made according to your requirement. Delivery Time: 15 days for molds making & 15 days for order production Payment Terms: TT or L/C at sight. Size , weight , dimensions
Size:20mm, 25mm
Size:20mm, 25mm
Acoustic panel.
Honey comb sandwich panel, rock wool sandwich panel, FRP composite panel.
Aluminum composite panel.Transportation, shipping
High glossy metal UV MDF panel, high glossy melamine UV MDF panel, high glossy acrylic MDF panel, high glossy veneer UV MDF panel.
MHS1560*600 Technicial Specifications: Characteristics: Comb tenoning and splicing is an effective way to connect the timbers to a longer length, is able to increase the utility rate of shorter timbers and reduce resources waste. The automatic finger-joint production line features compact structure, rational arrangement, high precision and efficiency, and manpower saving, is widely used timbers processing industry. Model MXZ3515T Auto Finger Shaper (Include Glue Spreading) MXZ3515 Auto Finger Shaper MHZ1560 Auto Finger Joint Assembler Table size (W*L) 850*600mm 850*600mm ---- Max. working size (L*W*H) 850*80*150 850*80*150mm 6200*150*80mm Min. working size (L*W*H ) 200*30*20mm 200*30*20mm 1000*30*20mm Shaper spindle diameter 70 mm 70 mm ---- Shaper blade diameter 160 mm 160 mm ---- Main saw blade size 255 mm 255 mm 355 mm Shaper spindle speed 5000 rpm 5000 rpm ---- Main saw spindle speed 2840 rpm 2840 rpm 3700 rpm Spreader roller speed 58 rpm ---- ---- Total motor power 17.24 kw 16.12 kw 7.7 kw Working air pressure 0.8 Mpa 0.8 Mpa 0.8 Mpa Max. jointing force ---- ---- 7800 kg Max. production rate ---- ---- 31 m/min.
MHS1560*600 Technicial Specifications Characteristics: Comb tenoning and splicing is an effective way to connect the timbers to a longer length, is able to increase the utility rate of shorter timbers and reduce resources waste. The automatic finger-joint production line features compact structure, rational arrangement, high precision and efficiency, and manpower saving, is widely used timbers processing industry. Model MXZ3515T: Auto Finger Shaper (Include Glue Spreading) MXZ3515 Auto Finger Shaper MHZ1560 Auto Finger Joint Assembler Table size (W*L) 850*600mm 850*600mm ---- Max. working size (L*W*H) 850*80*150 850*80*150mm 6200*150*80mm Min. working size (L*W*H ) 200*30*20mm 200*30*20mm 1000*30*20mm Shaper spindle diameter 70 mm 70 mm ---- Shaper blade diameter 160 mm 160 mm ---- Main saw blade size 255 mm 255 mm 355 mm Shaper spindle speed 5000 rpm 5000 rpm ---- Main saw spindle speed 2840 rpm 2840 rpm 3700 rpm Spreader roller speed 58 rpm ---- ---- Total motor power 17.24 kw 16.12 kw 7.7 kw Working air pressure 0.8 Mpa 0.8 Mpa 0.8 Mpa Max. jointing force ---- ---- 7800 kg Max. production rate ---- ---- 31 m/min.
Aluminum facade, wall panel, mashrabiya.Exporter
Panel.
Acoustic panel, wall panel, acoustic ceiling panel.
Solid aluminum panel, aluminum composite panel, composite insulation board.
