This type solar water heater has pumps to circulate thermal media, (water, or glycol) to exchange heat from the solar collector to the water storage tank. Solar collectors and storage tanks installed at different locations of the building and the heat transfer happens through high efficiency pumps controlled by microprocessor-based controls. Tanks can be installed separately from the collector Possibility to control overheating during summer Electric backup heater with auto temperature control Unlimited capacities & suitable for large installations Remote monitoring & Control options
Non Russian origin, Jet Fuel A1, FOB Rotterdam or FOB Houston, no advance payment, no deposit, seller able to do tank to vessel & tank to tank Rotterdam or Houston. Price : TBD QTY : 2M barrels trial and contract Terms: FOB QUALITY: Different from origin to other.
Air conditioning and refrigeration.
Solar Tanks ENAMELLED ACCUMULATION TANK Volume100L 5000L Maximum Operating Temperature95 °C Body Operating Pressure10 Bar Inner Surface CoatingTank inner surface is enamelled (glass-lined) in accordance with DIN 4753-3 standard InsulationInsulation is in accordance with EN 15332 Energy Efficiency Standard 100L 500L 42 kg/m³ water based hard PU (HCFC-Free) foam 800L 1000L42 kg/m³ water based hard PU (HCFC-Free) foam (Optional) 800L 5000L18 kg/m³ soft PU 800L 5000L26 kg/m³ flame retardant soft PU (Optional) External Cover Coating 100L 500L Electrostatic Powder Painted Steel / Artificial Leather / IXPE / ABS 800L 5000L Artificial Leather / IXPE / ABS Thermometer0°C 120°C Inspection and Cleaning FlangeInspection and cleaning flange is available in all series Electric HeaterElectric heater can be installed (Optional) Cathodic Protection ElementMagnesium anode in accordance with DIN 4753-3 standard (Electronic anode option)
Corrugated boxes.
A4 paper, woodfree offset printing paper, coated duplex board (grey & white back), newsprint, art card, ribbed & plain natural kraft paper, envelopes, kraft liner, testliner, fluting, used printing machines, corrugated boxes.
TMI 45.28.3.200424 - Dry Cleaning Machine (Steam Type) Product Description The machine uses high quality stainless steel, hot dip galvanised advanced anti-corrosion technology by solvent box design, the average service life of 15 years. In vitro activated carbon recovery unit. A high level of mould production, ensure parts of high strength, beautiful appearance, good interchangeability. Automatic machine dialogue computer control system, large screen and high brightness LCD display, make the operation stick out a mile, worry. The international forefront of washing machine technology of large-diameter in-line duct structure, effectively reduce the wind resistance, large volume, fast recovery. Using a new type of environmental protection filter high accuracy carbon core filter (patent technology international original washing clothes incomparable). Three sets of large solution storage tank automatic cleaning windows, without having to open up. Two separation of oil-water separation device configuration, the solvent and water more thoroughly, environmental economy. Volume load in line with international standards, large volume of the rotor cage, distillation box, making clothes washing cleanliness, solvent recovery effect is more outstanding
Compressors, pumps, motors.
This type solar water heater has pumps to circulate thermal media, (water, or glycol) to exchange heat from the solar collector to the water storage tank. Thermal media circulate and collect heat from the collector and transfer to the drain back storage tank. The solar pump activates and heat transfer occurs only when it is required and as a result heating of the water happens in the controlled manner. As the media drains to the drain back tank from the collector freely, the storage tank always needs installed below the collector and the interconnecting pipes must have slope. Tanks can be installed separately from the collector No overheating Electric backup heater with auto temperature control Remote monitoring & Control options Drain Back Solar Water Heater Drain back systems are closed-loop, indirect, active solar water heating systems. Glycol-water or mix of both will act as heat transfer media. The heat transfer media contained in an unpressurized, closed loop is pumped through the collectors. The media will transfer heat to the domestic water through a heat exchanger.
Ready EN590 , FOB ROTTERDAM , 100-200,000 MT price gross usd$670/ net usd$660 comission usd$10 ( buyer side $5/seller side $5 ) dip and pay 100% no payment whatsoever before success dip test cargo 1. BUYER issues ICPO after receiving SCO 2. SELLER issues SPA and Commercial Invoice (CI). BUYER Signs CI and returns to the Seller with the TSA/CPA and information letter issued by bank buyer 3. SELLER issues to the BUYER below documents: a) Official invitation letter top table meeting and inspection cargo and document b) Allocation Certificate. c) Product analysis Report d) ATV ( authorization to verify ) there is endors by port authority and tank storage company e) Injection reports f) DTA already endorses by the owner of the cargo and tank storage company , port authority g) Pass permit issued by port authority to enter and invitation letter by tank storage company for enter do dip test h) Clearn code i) SGS report tank injection j) TSR (tank storage receive) k) Authorization to sell and collect l) Statement of product availability m) Commitment letter to supply o) Certificate of origin 4. Sellerâ??s bank approves signed DTA along with FRESH SGS Report to BUYER to conduct Dip Test in Sellerâ?? sâ?? vessel or Tank storage 5. Buyer conduct dip test cargo in Sellerâ?? sâ?? vessel or Tank storage 6. Buyer succes dip test cargo buyer pay 100% total cargo via TT WIRE MT103 7. SELLER Change title of the product in BUYER name 8. Seller pays comission imenditiary 9. Continue process transaction long term
Spare Parts Kitchen Accessories.
AC Chillers, Generators, LED Lights, Controllers, Digital Signages.Design & Supply
Product Description The machine uses high quality stainless steel structure, where the dissolving touch the inside of the rotor cage, cage, outer air duct, filter, trap, distillation box, oil-water separator, solvent pipeline and other parts are made of high quality stainless steel finishing; hot dip galvanised advanced anti-corrosion technology by solvent tank, average design service life of 10 years, is several times ordinary carbon steel dry-cleaning machine life A high level of mould production, ensure parts of high strength, beautiful appearance, good interchangeability Full automatic computer control system, manual, automatic switch, can be prepared several sets of automatic washing done automatically Inverter, low-voltage electrical, pneumatic systems are all imported and domestic famous brand, to ensure the stable operation of the machine long time Guide the international forefront of washing machine technology of large-diameter in-line duct structure, effectively reduce the wind resistance, large volume, fast recovery, the chorionic villi were collected more thoroughly.Collector by using a transparent observation hole of elaborate design, effectively reduce the times of opening, ensure your operating environment and health New environment-friendly ecological filter high accuracy carbon core filter (patent technology international original) without the addition of dry cleaning filter powder, toner; eliminate maintenance cleaning, washing cleanliness is poor, the high cost of trouble; water saving, energy saving, raw material saving effect of extraordinary, washing light coloured clothing is unparalleled Three sets of large solution storage tank automatic cleaning windows, without having to open up Distillation is heated by external steam, safe, and reliable; produced by distillation heat can enter the drying duct two utilisation, energy utilisation remarkable economic, energy-saving expert real; and with the liquid level automatic control device, safe and reliable Siemens high performance frequency conversion motor, can work continuously for a long time, drying speed linear lifting process tends to be more stable, the machine runs more stable Refrigeration recovery system used in all the world famous product, ensure the economic and technical indicators of environmental protection energy-saving machine Bearing spindle and filters, easy corrosion, wear parts, are used in Japan Seiko NSK bearing, seal with the Italy CCVI and other world famous products, bearing system daily work without maintenance Two separation of oil-water separation device configuration, the solvent and water more thoroughly, environmental economy
PermAlert ( A division of Perma-Pipe ) is a state-of-the-art microprocessor based Leak Detection System (LDS) for Fluids manufactured in USA using a unique TDR Technology and catering projects worldwide. PermAlert offers fast response monitoring & alarms on contact with liquids and locates location. This system is used in Data centers, Pumps, Water pipelines, Fuel pipelines, Generators, Storage Tanks and even in containment piping products like Water, Petrol, Diesel, Kerosene, Jet Fuel, Naptha and other hydrocarbons ( including acids and bases ) can be detected using our system.
Below is detailed procedure for Rotterdam JET A1 fuel 1. Buyer issues ICPO according to Seller's Transaction Procedures with their banking details. 2. Seller issue commercial invoice of the product in tanks at the port; Buyer signs and return back the commercial invoice to the Seller along with MT199 3. Seller issue to buyer POP listed below and any more documents that the buyer need to verify the product: a. GPS coordinate-tank storage receipt (valid for 72 hours on weekdays) (TSR) with scanned barcode. b. Unconditional Dip Test Authorization Letter (DTA) c. Authorization to Sell and Collect d. SGS Report (Less Than 48 Hours old from Rotterdam branch) e. Authorization to verify the product for physical verification (ATV) f. Fuel injection Report at Rotterdam. 4. Buyer inspected by SGS on Buyer's expenses. (lf buyer choose to inspect again). *In case Buyer is satisfied with the above POP, buyer have the opportunity to make payment by MT103 and after successful title transfer buyer will provide logistics ( TSR, ATV & ATI ) to move the product. 5. Upon successful verification of the full POP documents, Buyer orders SGS Intertek or its equivalent team to conduct a dip test on the product in the Seller's tank at Buyer's expense. 6. Following the completion of the dip test, Buyer provides his storage receipt ( TSR, ATV & ATI ) to Seller, injection commences into Buyer's leased storage tanks and upon completion Of full injection, Seller issues to the Buyer with full injection report. 7. Buyer makes 100% payment by MT 103 TT wire transfer for the total product value and the Seller transfers the title to the Buyer along with all documentations. The Seller pays commission to all intermediaries involved in the transaction within 24 hours upon confirmation of Buyer' s payment. 8. Seller issues draft sales purchase agreement (SPA) to the Buyer for review for R&E monthly deliveries. 9. Buyer reviews and approves the SPA and issues SBLC/IRDLC irrevocable, non-transferable auto revolving for 12 monthly shipment value and documentary letter of credit for length of the contract and for each lift per schedule. Buyer pays after dip test by MT103 wire transfer on each monthly quantity. 10. The subsequent delivery shall commence according to the terms and conditions of the contract. Product origin- KAZAKHSTAN Where the product available now STORAGE TANKS IN ROTTERDAM AND HOUSTON Any recent SGS SEE PROCEDURE Which country of origin documents KAZAKHSATAN
COMMODITY: WEST TEXAS INTERMEDIARY (WTI) TOTAL QUANTITY MIN 2,000,000 BBL MAX 10,000,000 BBLS SAOGC PRICE FOB Houston: NYMEX PLATT LESS $2.00 ORIGIN: USA NOTE: BUYER MUST COPY OUR PROCEDURE INTO ICPO FOB PROCEDURE 1. Buyers issues and send irrevocable corporate purchase order (ICPO) with sellers transaction procedure along with passport copy of the company representative. Buyer will also provide TSA to seller 2. Seller issues CI. 3. Buyer sign CI and Return CI to seller with ATV from buyers tank for seller representative, SGS Team, and buyer representative to meet at seller tank storage for tank and pipeline verification. SAOGC 4. Upon successful verification, seller issues the hard copy POP documents to buyer representatives in person (face to Face) â?¢Quantity and Quality Certificate (SGS) 48hrs fresh â?¢Tank Storage Receipt (TSR). â?¢Product Passport (Dip Test Result). â?¢Statement of Product Availability. â?¢Refinery Commitment to Supply. â?¢Authorization To Sell/ Collect (ATSC). â?¢Authorization Letter to Verify the Product with the Tank Farm. â?¢Company Registration Certificate. 5. Upon successful verification of documents and SGS report by buyers team buyer commence dip test in sellers tank if need be for more confirmation, upon confirmation of product Q&Q, begins into buyers tank storage all parties sign NCNDA/IMFPA. 6. Buyer makes payment by MT103 or TT wire transfer for the total product available. 7. Seller change title of ownership to buyers name and pay all intermediaries according to the signed NCNDA/IMFPA for monthly deliveries and buyer lifts the product. SAOGC Note: only verified buyers ICPO by our legal team will be accepted. ISSUE ICPO, PASSPORT COPY & TSA TO:
EN590 10PPM OFFER Price:$530/MT 1. Buyer issue ICPO and TSA containing the seller's working procedure with scanned copy of buyer's passport along with buyer Company certificate of incorporation. 2. Seller issues commercial invoice of the product in tanks at the port, to be sign along with the attached below partial proof of products. 3. Upon receipt of the signed CI and ATV from buyer storage tank for verification seller issue the below pop documents. -48 hours fresh SGS -INJECTION REPORT -BILL OF LADDING. -TITTLE OF OWNERSHIP TRANSFER -TSR OF WHERE THE PRODUCTS STORE TO VERIFY PHYSICALLY. 4. Buyer inspects by SGS on buyer s expenses and sends TSR. 5. Upon successful dip test in tanks, product will immediately be injected into Buyer's tanks. Buyer makes payment for the product via MT103/TT POINT NO 1,2,3 Is most important . If u can provide then can deal . If not do not waste time 1) Icpo 2) TSA 3) ATV
District cooling / district heating, heat exchangers, cooling tower, thermal storage system [tes tank], domestic / centralized hot water system, turnkey steam system, turnkey solar system, turnkey boiler system, chiller, chilled water pump, valves, compressed air piping, generator fuel filling system, air separators, air dirt separators, expansion tanks, y strainers, duplex strainers, basket strainers, suction diffusers, triple duty valves, automatic air vents.
WTS CRUDE OIL ANALYSIS API 24.0 COMMODITY:WTS CRUDE OIL API 24.0 ORIGIN: HOUSTON, TEXAS QUANTITY:1 MILLION SPOT PURCHASE WITH 2 MILLION BARRELS PER MONTH CONTRACT FOB:HOUSTON, TEXAS PRICE:WTI PLATTS - 1 COMMISSIONS: COMMISSION $.50 INCLUDED IN THE - 1 PRICE SPLIT $.25 BUY SIDE / $.25 SELL SIDE PAYMENT TERMS:BY SWIFT MT 103VIA BANK OF AMERICA IOLTA INSPECTION: Q&Q, INTERTEK OR SGS AT BUYERS OWN EXPENSE FOB SPOT PROCEDURES: 1. Seller issues a commercial invoice (CI) to Buyer to sign and return. 2. Seller issues report for lifetable quality buyer signs and returns to seller. 3. Within 8 hours after receiving the CI buyer pays via MT103/TT transfer 5% of the funds to cover 1,000,000 barrels quantity ready in tank for injection. 4. Seller issues full Injection report for lifetable quantity tank farm and tank number Houston, Texas. 5. Buyer nominates logistics / vessel Q88 to inject the product. 6. Buyer has 3-5 days to lift quantity at sellers storage tank. If Buyer does not remove Crude Oil in a lot time. Buyer will be responsible for tank storage fees incurred and will be deducted for the 5% deposit. 7. Seller injects fuel into buyers vessel buyer pays balance of funds to cover quantity loaded. 8. Seller issues SPA for signature and buyer agree to future lifts.
FOB ROTTERDAM - DIP and PAY payment terms Specifications added in the picture section. Procedure : - Send LOI to Stoix Trading FZCO to initiate the process and we will send you our SCO. 1 Buyer sends ICPO in line with seller working procedures alongside his/her Tank Storage Agreement (T.S.A.) on receipt and acceptance of Seller's Soft Offer 2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller within its validity 3. Upon receipt and review of the signed C.I., seller issues Dip Test Authorization (D.T.A) to be completed and signed by buyer/ Buyer's logistics in order for Dip Test to be conducted alongside counter signed copies of the C.I 4. Buyer returns the Dip Test Authorization (DTA) fully completed and signed within its validity and upon successful review of the completed DTA, seller issues the below full POP documents: - A. Fresh SGS Report (Not older than 72 hours); B. Product Reservoir Receipt; C. Accreditation Certificate; D. Product Passport (Quantity and Quality Analysis); E. Authorization to Sell and Collect Certificate (ATSCC); F. Pre-Injection Report (PIR); G. NCNDA/IMFPA (To be completed by all intermediaries); H. Certificate of Product Origin; Authority to Verify (ATV) either physically or otherwise. 5. Upon receipt and confirmation of the above POP Documents, Buyer provides its testing officials (SGS or INTERTEK) and the needed test are carried out on the product in seller's tanks; 6. Buyer upon successful Dip Test makes full payment by MT103 / TT wire transfer for the total product and Seller pays commission according to NCNDA/IMFPA to all intermediaries involved in the transaction within 24 hours after confirmation of buyer's payment and injection commences immediately. 7. Seller issues a contract for buyer's desired duration upon successful completion of the trial order.