TMI 13.1.200415 Product Description Rotor Frame machine is a three-shaft driven computerized type high speed suspend flyer roving frames that adopt the advanced computer numerical control technique, without cone drum structure, mechanical forming and direction transposition structures of former flyer frames. It's more simple and more reliable than former roving frames, all operations are controlled by inverter and PLC. Technical Specifications Suitable for square fiber length:60-200mm Drawing multiple :4-16 Viscosity range:10-40twist/m The scope of Article :0.3-1g/m Feeding range:5-15g/m Constant speed:the maximum mechanical speed 1200RPM Maximum process speed 900RPM Drafting system : A complete unit Chinese brand drafting system (spring weighting arm). Roller diameter(mm) : 28.5,28.5 Top roller diameter(mm) : 25,28 Drafting range : 4.2-12 Mechanical spindle speed(r/min): 1600 Twist range(twist/m) : 18.0-80 Bobbin dimensions (mm) : 45 445 Take up package dimensions (mm): 152 40
TMI 14.2.200415 Product Description Ring Spinning Frame has the features of high quality yarn, high level of automation, convenient operation and easy management . The option for the number of spindle ranges from 384 to 516 .The machine can be equipped with every kind of drafting system that is available from Chinese or European brands. This model was first entered into the market in 1989 and it is known as one of the most stable and reliable ring spinning frame by customers after modification for 20 years. Technical Specifications Spindle gauge: 70mm Lifting: 205, 180, 155 mm Ring Diameter: 45,42,38mm Number of Spindle: 384,396,408,420,432,444,456,468,480,492,504,516 Yarn count: 97.2---4.9tex (6--12Ne) Twist: 300--1600(T/m) Draft Ratio: 10-50 Spindle speed: 15000-22000 rpm Spindle drive: Single tension pulley,Z or S twist optional Spindle wharves diameter: 22,24,20.5mm Creel: One tier hanger, Four or six rows optional Main Motor (380v50Hz): 15/7KW 17/9KW 18.5/11KW 22/11KW (380v) Suction Motor (380v 59 Hz): 1.5KW (for No.of spindles below4444) 2.2KW (for No.of spindles above 456) Lift Motor: 370W Distance between Spindle from left and right side: 700 mm Headstock dimensions: Width: 640mm, length:680mm, height:1700mm Endstock Dimensions: Width:640mm, length:1300mm,height: 1768mm Total height of the machine: 2300 mm Total length of the machine: L= 2380 + (N/2-1) 70mm L: length N: where means the number of spindles
TMI 1.1.200326iii Product Description The Full automatic textile rubber cots take off machine is newly developed for take off the rubber cots from the roller bearing, It is a new generation of cots take off machine. The Full automatic textile rubber cots take off machine is mainly used in spinning mill to carry out take off the rubber cots from the roller bearing. This machine is a fully automatic machine, which greatly saves labor. It's excellent take off quality helps in improving manufacturing efficiency & saves time and cost of operation. The Full automatic textile rubber cots take off machine has an automatic feeding. It automatically takes off the rubber cots from the roller bearing & the products are of a high precision take off. Technical Specifications Feeder power: 0.35 Kw Production: 300-400 Sets / hour Air pressure: 5 Kg or more Function: fully automatic take off aluminium bushing rubber cots, double layer rubber cots onto the roller bearings.
TMI 1.1.200326i Product Description The Full automatic textile rubber cots grinding machine is new developed for grinding rubber cots, it is a new generation of cots grinding machine. The Full automatic textile rubber cots grinding machine is mainly used in a spinning mill to carry out grinding of rubber cots. This machine is a fully automated machine, which greatly saves labor, provides excellent grinding quality to improve manufacturing efficiency & save the time and cost of operation. The Full automatic textile rubber cots grinding machine has an automatic feeding. The processing of rubber cots is of a high precision grinding & end surface level off is smooth. Technical Specifications Grinding wheel motor power: 2.2 Kw Rotating motor power: 180 W Displacement motor power: 180 W Dust collection fan power: 750 W Feeder power: 0.3 Kw, 220 V Air pressure: 5 kg or more Production: about 300-360 PCS/H
TMI 20.4.200416 Product Description High speed air jet loom is with the rigidity of machine frame and top beam further strengthened. The whole machine is of a desired stability, beating system & is better optimised. Structure is further improved. Beating may be done with four or six-shedding levers. With the six-shedding lever, the warp yarn has longer opening hours, as a result, this high speed air jet loom will be better for weft yarn insertion. Especially suitable for wider fabric weaving, so it extends the weaving scope on our high speed air jet loom Technical Specifications Reed Width: 150 cm, 170 cm, 190 cm, 210 cm, 230 cm, 260 cm, 280 cm, 320 cm, 340 cm, 9000px Drive: New designed motor; Electromagnetic brake; But on control Weft selection: 1,2,4 or 6 colors Weft insertion: The main and auxiliary nozzles are electronically controlled Beating: Solid beating shaft with multiple foot stand, Four crank shedding beating Let-off: Electric let off, 800 mm beam pipe Take-up: Electric take up, Max rolling 600 mm Heald frame: 6-16 Pcs on low price by Tsudakoma tech weaving air jet loom Shedding: crank shedding/positive cam shedding/electronic dobby shedding Air supplying: Centralised air compressor Speed: 500~1000rpm Power: 2.8kw,3.0kw,3.8kw,4.5kw Weft density: 5-60 picks/inch Yarn account: 10-60S Cutting: Mechanical Selvedge: Closed selvedge with tuck-in device Wires: 10000 pieces Dropper: 10000 pieces Reed: 1 piece Back rest: Double back rest,removable back rest seat on the back of high speed air jet loom Electric control box: Touchable screen; Controlled by computer; parameter setting and controlling, auto diagnosis Stopping device: 4 color LED lights, cracked ends: 6 line droppers, broken picks, two weft feeler, Leno edge apparatus, near switch, Capture side of weft yarn, sensor Gears in main box: T tooth with QT700 material Belt: Brand: Chinese, excellent quality, longer life Gear shaft: 45# steel with High frequency quenching process Oil seal: CTY GERMANY Oil nipple: Taiwan Crossbeam: Triangular steel, weaving steadily Lifting: Solid supporting, Thickened pipe,imported bearings Painting: Polishing, sandblasting, baking finish Iron castings: Weight of the high speed air jet loom, iron castings are increased
TMI 21.5.200416 Product Description This can be compared with almost all other advanced version of modern water jet looms ranging from let off system, shedding section, take-up section, drive system and more. It is suitable for super high speed and steady working, excellent performance in weaving high density cloth winder workable range of yarn and fabric. The optional single-pump double nozzle electronic measuring & storage system, two-pump two nozzle electronic measuring& storage system,tappet shedding device, dobby shedding device can be mounted on this Technical Specifications let off/take up: Electronic or mechanical shedding: plain or cam or dobby feeder type: Electronic or mechanical Reed width: 150 cm, 170 cm, 190 cm, 210 cm, 230 cm, 260 cm, 280 cm, 340 cm, 9500 px Filling insertion rate: 2,280m/min max. Head frame: Tappet shedding: 2, 4, 6, 8, 10 12pcs max. â??Dobby shedding: 16pcs max. Power: 2.2kw 3.8kw Weft density: 5~60picks/cm Rotational speed: 1,200rpm max. Brand of pump, plunger, bush, transmission etc are optional.
TMI 45.48.4.200429 - Multifunctional Suction Blower Bridge Type Ironing Table Product Details Mufti functional suction type hot blast Bridge station electronically controlled pneumatic operation, simulated human body structure design reasonable ironing table according to the human level down automatically, the other with a unique suction blower unit. In the middle of the ironing table applies to all types of clothing, finished ironing on the exhaust, throttle control die conversion foot switch controls the main motor, saving energy according to user requirements, configure iron hanger is Aurora lighthouse. Operating principle: The ironing table using multi-blade centrifugal impeller, suction, low noise, dehumidifiers styling effect using quality materials, melt suction dehumidifiers to wave inone, tops, perforated moulding and self-absorption using blast high-speed motor by hand ironing station, multi blade centrifugal fan wheel, automatic dehumidifier has reasonable structure design steam ironing table. Equipment Features: 1.Self-priming suction blast of hot air scouring counter tops, hot and cold spotting gun, scouring ironing can be synchronised, time-saving station comes 2.Suction blast ironing table comes with lighting facilities and ironing saving devices, easy and flexible, lightweight and extremely. 3.Suction blast ironing table configuration efficient steam separator device and the Italian original electric steam iron. 4.Full computer control, suction, blowing fast switching, simple operation, automatic water, soft drinks automatic separation system. 5.Using imported sponges, crisp and permeability is good. Luxury fashion exterior design, manufacture beautiful, economical and practical, superior performance, is the ideal Equipment to replace imports of similar products. Product Usage: It is suitable for all kinds of fabrics and semi finished products, iron, cotton, wool, synthetic and blended fabrics, the fabric flat after ironing, very wide, can not afford to light, shaping effect, does not damage the weave, the production of shirts, fashion, sheep sweaters, suits and other clothing necessary ironing equipment.
TMI 60.1.1.200402 - DISK BALE PLUCKER Spinning Machinery Product Description Disk bale plucker is suitable for the plucking of all classes of raw cotton, cotton chemical fiber and middle-long fiber shorter than 76mm. Itâ??s the first procedure of the machine and consists of pulley, central axis, expansion tube and ground rail, etc., and this model can be used in double. For a large number of raw material varieties with great differences, this model helps improve the number of mixed bale and reduces the mixing units & working quality. Disk plucker is an important machine in blowing-carding line. It is applicable for kinds of raw cotton. Cotton content chemical fiber, middle and long chemical fiber, generally two set of plucker are put into production in parallel. Plucking beater go down interval and rotate with carriage to pluck cotton sequence. Cotton plucked is transported to the next machine via duct. Disk plucker adopts a saw-toothed beaters ,which are divided into 3 groups,and fixed from inside. From inside to outside according to the tooth setting from thin to thick so as to get fibers minor and uniform,thus itâ??s advantageous to the blending and cleaning of next process. â?? Technical Specifications Production (kg/h): 800 - 1000 kg Loading Capacity / Cotton Piling Weight in kg: 2000 Kg Each (Around 2 sets) Outer Wall Diameter in mm: 4760 mm Inner Wall Diameter in mm: 1300 mm Speed of Carriage in r/min: 1.6 - 2.2 r/min Beater Rotating Speed in r/min: 740 r/min Knife out of Rib / Blade extension from grid in mm: 2.5 - 7.5 mm Crab Slewing Speed in r/min: 0.59 - 2.96 r/min Ground Rail External Diameter in mm: 5192 mm Total Height in mm: 4155 mm General Power in Kw: 4.17 Kw Net weight in Kg: Around 1600 Kg
TMI 70.1.1.200403 - DISK BALE PLUCKER New Spinning Machinery Product Description Disk plucker is an important equipment in blowing-carding joint machinery. It is suitable for each kind of raw cotton, cotton content chemical fiber, middle and long chemical fiber. Generally two set's of plucker are put into production in parallel. Plucking beater goes down the interval and rotates with carriage to pluck cotton in sequence. Cotton is plucked & transported to the next machine via duct. It Consists of a Flexible pipe, Carriage frame, Outer wall, Beater wall, Beater, Rail, Inner wall & Ring. Technical Specifications Production Output (kg/h): 800 - 1000 kg Loading Capacity / Cotton Piling Weight in kg: 2000 Kg Each (Around 2 sets) Outer Wall Diameter in mm: 4760 mm Inner Wall Diameter in mm: 1300 mm Speed of Carriage in r/min: 1.6 - 2.2 r/min Beater Speed in r/min: 740 r/min Blade extension from grid in mm: 2.5 - 7.5 mm Rail Diameter in mm: 5132 mm Total Height in mm: 3864 mm Power in Kw: 4.1 Kw Weight in Kg: Around 1600 Kg
TMI 60.2.1.200404 - RECIPROCATING BALE PLUCKER Spinning Machinery Product Description Reciprocating bale plucker is one of the first process of Blow room & carding Department. It is suitable for each kind of cotton, chemical & viscose fibre length less than 76mm. The pluck arm, mounted with two beaters, can lift and revolve 180 . The pluck arm is moved to and back to pluck fibre above bale. The fibre plucked are sucked into the front feeder by air current through transport duct for further process. Technical Specifications Beater Width: 1720 mm (Special) & 2300 mm (Normal) Production Kg/h: 1000 Kg/h & 1500 Kg/h Basic Pile Weight: 6000 Kg & 7500 kg Length of Floor Space: Basic Type 22.03 m (8 Sections of Air ducts) can be Increased or Decreased by 2.5 m x n Bales Arrangement Length: Basic Type 15.9 m (8 Sections of Air ducts) can be Increased or Decreased by 2.5 m x n â??Intermittent Dropping of Beater: 0.5 ~ 10 mm/time Frequency Control Usually 1 ~ 3 mm/time Calender Roller Dia.�¦130 mm Both Sides; Middle �¦116 mm Carriage Reciprocating Speed: 16.4 m/min (max); Generally 10 m/min Installed Power: 8.6 Kw & 10.6 Kw Overall size: 22030*5212*3082 & 22030*6648*3082 Net weight: 6000 Kg & 6500 Kg
TMI 60.5.1.200412 - FINE OPENER Spinning Machinery Product Description Fine Opener is suitable for further opening and impurities removing of all classes of raw cotton, cotton chemical fiber and the middle to long chemical fibers shorter than 76mm. It mainly consists of cotton store and feeding construction that features strong opening and good effect of impurity removing. Technical Specifications Machine Type: TMI 60.5.1.200412a Production: 800 Kg/h Width: 1060 mm Beater type: Hedgehog Beater diameter mm: 610 Beater rotating speed r/mm: 480 Hopper roller diameter mm: 76 Hopper roller rotating speed r/mm: 35-39.45 Grate Bar Type: Triangle grid bar Adjusting type: Hand wheel out of machine General Power kw: 3.55 Size(L WH): 1810 X 1650 X 3875(including Condenser) Machine weight: 1800 Machine Type: TMI 60.5.1.200412b Production: 600 Kg/h Width: 1060 mm Beater type: Card wire roller Beater diameter mm: 600 Beater rotating speed r/mm: 540 Hopper roller diameter mm: 76 Hopper roller rotating speed r/mm: 35-39.45 Grate Bar Type: Triangle grid bar Adjusting type: Hand wheel out of machine General Power kw: 3.55 Size(LÃ??WÃ??H): 1810Ã??1650Ã??3875(including Condenser) Machine weight: 1800 Machine Type: TMI 60.5.1.200412c Production: 600 Kg/h Width: 1060 mm Beater type: Sawblade Beater diameter mm: 600 Beater rotating speed r/mm: 600 Hopper roller diameter mm: 76 Hopper roller rotating speed r/mm: 35-39.45 Grate Bar Type: Triangle grid bar Adjusting type: Hand wheel out of machine General Power kw: 3.55 Size(L X W X H): 1810 X 1650 X 3875(including Condenser) Machine weight: 1800
Blowroom Spinning Machines
Carding Spinning Machines
Draw Frame Spinning Machines
Combing Textile Spinning Machines
Rotor Spinning Frame Machines
Roving Frame Machines
Ring Spinning Frame Machines
Auxiliary Spinning Machines
Air Jet Looms Weaving Machine
