Ungalvanized steel wire rope 6 12 + 7FC, RHRL ( Right Hand Regular Lay), T/S 1770/mm2, according to EN 12385:4, packing in ply wooden reels/1000 meters. Size 6mm, 8mm, 10mm, 12mm, 14mm, 16mm. ... Galvanized Steel Rope. Fiber core RD / mm Weight kg/mm2 /unit 6 Ã?? 19 + 1 13.00 160
Chemical Make-up of Forged Alloy Steel By far the largest tonnage of alloy steels is of the types containing 0.20 to 0.55% carbon. ... Manganese, nickel, chromium, molybdenum, vanadium, aluminum and boron are commonly present in these steels to enhance the properties obtainable after quenching and tempering.
Tensile Strength: 480 N/mm2. Elongation: 33% (Note: 5.5 mm wire rod before wire drawling). Elongation: 5-6% (Note: Diameter 3.3 mm wire rod drawling). Chemical: Carbon: 0.09% Si: 0.17% Mn: 0.57% P: 0.024% S: 0.02%.
5-2 AL Aluminum conductor - AAC For this conductor, the applicable paragraphs of article 4 are: 4.2 & 4.4 The sizes of conductor required are as follows: 95 mm2 19/2.5 mm & 2000 m + 2% per drum. 70 mm2 19/2.1 mm & 3000 m + 2% per drum. 50 mm2 19/1.8 mm & 3000 m + 2% per drum. 35 mm2 7/2.5 mm & 3000 m + 2% per drum.
Bonding jumpers shall consist of 100 mm (4 inches) wide copper strip or two 6 mm² (10 AWG) copper conductors spaced minimum 100 mm (4 inches) apart. Use 16 mm² (6 AWG) copper where exposed and subject to damage. B. Comply with the following when shielded cable is used for data circuits.
Material Grade: C 45. Usage/Application: AUTOMOTIVE PARTS / GEARS / PINIONS / SHAFTINGS. Shape: ROUND/SQ./ HEX. Single Piece Length: 3 - 6 - 12 MTR. Material: Carbon Steel. Size: DIA 5 MM TO DIA 400 MM. Technique: HOT ROLLED / COLD ROLLED / FORGED. Surface Finish: BRIGHT / BLACK.
Chequered Plates for structural steel: in Sheets: Size: 1mx2m and 4'x8', in thickness of 1.50 mm, 1.60 mm and 1.80 mm. Packing: Sheets packed in bundles, each weighing between 3 to 5 M/Tons. In Coils: Size: 1000mm and 1219mm, in thickness of 1.50mm and 1.60mm. Weight of each coils to be between 6 to 8 M/Tons.
CONTENTS SPECIFICATIONS Base Metal Cold Rolled, Galvanised, Aluminium zinc Alloy, Stainless Steel and Aluminium Thickness - TCT 0.18 to 1.25 mm * Width 600 to 1500 mm Coil ID 508 and 610 mm
Concertina razor wire with 0.5 mm thickness coating. Core wire diameter: 2.5 mm. ... Blade length: 22 mm. Blade width: 12 mm. Blade spacing: 35 mm.
Key Properties of Copper Alloys Excellent heat conductivity. Excellent electrical conductivity. Good corrosion resistance. Good biofouling resistance. Good machinability. Retention of mechanical and electrical properties at cryogenic temperatures. Non-magnetic.
Electrodes for manual and automatic arc welding of low carbon, medium carbon, and low- alloy steels are mostly made of wire, contain not more than 0.1 per cent carbon and 0.35 to 0.6 per cent manganese. Some contain more manganese and both manganese and silicon.
Material Mild Steel Thickness 0.30 - 2 mm Packaging Type Coil Size 740 mm - 1220 mm Coil Weight 3.5 - 4.5 ton
2 Tensile properties of the wire shall be as follows: Tensile strength of galvanized M.S. Wire shall be 300 550 N/mm2. 4.1. 3 Type of coating of galvanise shall be heavy as per IS: 4826 1979 and the wires shall be galvanized after drawing & annealing.
Round Annealed Binding Wire Dimension: 5.50mm Diameter. Quality: SAE 1008 LS16 Annealed, lightly oiled. Tensile Strength: 250-430 N/mm2. Elongation: 40 % @ measuring length of 5.0 x dia. External Diameter of Coil: 800-900 mm. Internal Diameter of Coil: 550 mm. Height of Coil: 600 mm. Delivery Form: Coil.
Lashing wire The telecommunications industry uses numerous types of wire. ... Type 430 is suitable for ordinary atmospheric exposure. ... Type 316 (S31600) lashing wire provides the best corrosion resistance in coastal areas. ... Type 316 has a tensile strength ranging from 95k to 125k psi, and its average break load is 145 pounds.
Mesh Count Wire Diameter (inches) Aperture (mm) 3 Mesh* 0.047 7.27 4 Mesh* 0.063 4.75 4 Mesh* 0.047 5.15 4 Mesh* 0.035 5.45
Metal cored wires are classified under the American Welding Society specification with solid MIG wires (AWS A 5.18-93 for mild steel, AWS A5. 28-98 for low alloy and AWS A5. 9-93 for stainless steel).
ExiPlus Meets compendial specs of Ph.Eur Appearance (Colour) Grey Appearance (Form) Fine powder free from aggregates Solubility (Turbidity) 10% solution 5N HCl Clear Solubility (Colour) 10% solution 5N HCl Colourless Assay min. 99.5% (Total zinc) Iron (Fe) max. 0.005 % Copper (Cu) max. 0.0005 % Lead (Pb) max. 0.01% Fatty matter Not detected Substances reducing Permanganate (O) max. 0.0015% Acid insoluble matter max. 0.01%
Standard Number Last version Description Status A 19 1936 Quenched-and-Tempered Carbon-Steel Axles, Shafts, and Other Forgings for Locomotives and Cars Replaced by A 236 /no materials/ A 63 Alloy Steel Forgings for Locomotives and Cars Replaced by A 237 /no materials/ A 105/A 105M 2005 Carbon Steel Forgings for Piping Applications /1/ A 133 Alloy-Steel Forgings for Locomotives and Cars Withdrawn 1941 /no materials/ A 136 Forge-Welded Steel Pipe Withdrawn 1945 /no materials/ A 181/A 181M 2006 Carbon Steel Forgings, for General-Purpose Piping /2/
Ring Size Inside Diameter Hole Size 25 25-3/16 *7/16-9/16 26 26-3/16 *7/16-9/16 27 27-3/16 *7/16-9/16 28 28-3/16 *7/16-9/16