This derivative possesses low viscosity, is very sticky and hygroscopic in nature. It helps inincreasing dry strength and at the same time is completely soluble in water. It can be used for: Mining industry as additives for froth flotation (ore sedimentation) In foundries as an excellent binding agent for cores
Cationic starch carries a positive charge over the entire pH range creating their affinity towards negatively charged substrates, such as cellulose, pulp and some synthetic fibres, aqueous suspensions of minerals and slimes and biologically active macromolecules. This starch may be derived from either maize or tapioca is used primarily as a wet-end starch and mainly used in paper and cardboard forming processes: -Increases mechanical strength and for better retention of fines and fillers -Enables faster drainage and improved sheet formation and production, saving both time and resources. -Improves opacity, brightness and stiffness of paper and allows for better printing quality -It is also popularly used in the manufacture of disposable diapers (nappies) and personal sanitary products. Parameters BiCAT: -Appearance - fine free flowing white powder -pH of 10% Slurry - 6.0- 8.0 -Moisture Max -13.0 % -Viscosity in Brookfield Viscometer -Min 300 cps -Brightness - Min 85.0 % -Degree of Substitution - 0.02-0.04 % -Cold Water Solubility -Max 4.0 %.
Cationic starch carries a positive charge over the entire pH range creating their affinity towards negatively charged substrates, such as cellulose, pulp and some synthetic fibres, aqueous suspensions of minerals and slimes and biologically active macromolecules. This starch may be derived from either maize or tapioca is used primarily as a wet-end starch and mainly used in paper and cardboard forming processes: -Increases mechanical strength and for better retention of fines and fillers -Enables faster drainage and improved sheet formation and production, saving both time and resources. -Improves opacity, brightness and stiffness of paper and allows for better printing quality -It is also popularly used in the manufacture of disposable diapers (nappies) and personal sanitary products. Parameters BiCAT: -Appearance - fine free flowing white powder -pH of 10% Slurry - 6.0- 8.0 -Moisture Max -13.0 % -Viscosity in Brookfield Viscometer -Min 300 cps -Brightness - Min 85.0 % -Degree of Substitution - 0.02-0.04 % -Cold Water Solubility -Max 4.0 %.
Our Cold Pasting Gum Powder possesses a consistent viscosity, excellent adhesive property, high strength film property, best tackiness, is fast drying and available in a wide range of water solubilities. This product is highly appreciated for its purity, high effectiveness, precise pH value, and long shelf life. This is a type of pasting powder which is primarily used for imparting superior stiffness and strength to laminated boards and considered as an ideal choice for making corrugated sheets. -Applications: -Labels (Regular and Waterproof) -Used in Carton Board and Corrugated Boxes Manufacturing -Wood Adhesives -Paper Sacks -Stamps, book bindings, envelopes -Parameters BiPAS:�?� -Appearance -Free Flowing , off white Powder -pH of 10% Slurry - 8-11 -Moisture - Maximum 10% -Viscosity in B4 Cup [1:6] 28-32 Seconds
Produced by the hydrolysis of corn-starch, through an eco-friendly process, our white dextrin has a wide range of applications: - Can be used at higher solids levels than native or modified starches - To create stronger bonds - Have more tack - Dry faster than pastes made from unmodified starch - Is soluble in water Dextrin pastes provide excellent machinability and can be used in: - Adhesives and coatings that come into contact with food products - Child-safe school pastes - Removable wallpaper - Bag/envelope seams - Paper and textile sizing. Parameters: -Appearance- Off white free flowing powder -pH of 10% Slurry -2.5 - 3.5 -Moisture -Max 10% -Ash content -Max 1% -Free acidity- Max 5ml -Cold water solubility -Min 85%
Tapioca starch is used across a variety of culinary disciplines and is particularly useful for thickening, gelling, binding, and stabilising food products. The tapioca starch that we manufacture provides: - Neutral flavour and appearance - Superior texturizing, mouthfeel, and freeze-thaw qualities - Crispiness to crumb coats - Structural resilience to baked goods, noodles, and pastas. - A great nutritional value since it is rich in calcium and vitamin B12. Tapioca starch may be applied in various foods including : -Soups, sauces, and dressings - Baked items, e.g. pastries and pies - Extruded foods - Cooked meats - Ice cream and Ice cream cone manufacturing - Noodles and pastas Parameters: -Appearance- Free Flowing Cream-White Powder -pH of 10% Slurry- 5.0 - 7.0 -Moisture Content- Max 12.0% -Viscosity of 2% solution in Redwood No.1 viscometer at 75C Min 50 sec Viscosity of 5% solution in Brookfield viscometer at 50C -1500cps -Fibre Content (100 gram)- Max 0.5 ml -Sieve retention on 100 mesh- Max 1.0% -Ash Content- Max 0.2% -Sulphur Dioxide- Max 50 ppm -Brightness- Min 93.0% -Free Acidity (10 gram)- Max 1.5 ml
Spray starch derived from either maize or tapioca is applied by means of spraying and is used primarily in the production of paper, boards, and ply. This modified starch: - Increases the strength of ply bonds in boards and plywood. - Increases the bending and spring back tendency of boards. - Reduces the de-lamination of plywood and laminated boards. Parameter: -Appearance- fine free flowing white powder -Viscosity in Brookfield Viscometer -Min 2000 cps -Moisture Content- Max 13.0% -pH of 10% slurry- 6.0 - 8.0 -Ash Content- Max 1.0% -Brightness -Min 85.0% Cold water Solubility Max 4.0%
Maize starch is a very dynamic product that assists in various types of food production. It has multiple applications to achieve various effects. Our food-grade products comply with the most stringent hygiene standards during both production and packaging. Maize starch can be used to: - Thicken soups and sauces. - Achieve a super crispy crust coat in fried foods. - Add structure to cakes and pastries - provide freeze-thaw stability and retrogradation of frozen and bottled foods - enable flavor encapsulation helping preserve food flavors for longer - control syneresis and enhance the thickness of yogurts and creams - enhance the mouthfeel of a wide range of fresh and canned foods Small changes to its specifications can enable this native starch to fulfill your culinary needs: our sales team would be
All stock are based in uk for next day dispatch. (normally delivered within 2 working days) Adjustable seatbelts, foot pedal gas Power on/off switch, horn Battery charger, quick assembly manual. Suitable age 3+ years old / weight limit: 30kg. Batteries: 6v 10ah. Motor: 550/12000 rpm. Speed: up to 5-6 miles per/hour. Run time: up to 1 hour on one charge depending on road condition and weights. Mp3 plug-in Fully functional parental remote control Forward and reverse gears Full working lights Gross weight: 19.2kg, net weight: 15.7kg 12 months manufacture warrantee, 14 days peace mind return. You will get exactly what you see in the above picture. Car size:1080mm * 660mm * 495mm Packing size: 1205mm * 645mm * 340mm The ride on kid car comes with 2 fitting spanner, 1 set of screws, 1 battery, 1 remote control (for parent use), 1 battery charger and the instruction manual.
Drilling starch is a polymer derived from the unmodified starch including amylopectin content. This starch has fermentation stability and it gives enhanced high temperature fluid loss performance when working in combination with drilling fluids. It has optimal use in all water-based drilling, stimulation, and completion fluids. Usage: -Apt for drilling, work over or completion of fluid leakage - Control additive appropriate for utilization at high temperatures - Keep up liquid loss control at up to 300F (150C), helps in stabilising rheology - Does not ferment Treatment rate, Typical, 1-4 ppb, as essential to control liquid loss. - Higher temperatures (above 150C) may be necessary to activate HT Starch to supply effective rheology and fluid loss control totally as a binding agent. Parameters: -Suspension Properties: -Viscometer dial reading at 600 r/min: -In 40 g/lit salt water, after 16 hrs hot rolling at 250F -Max 18 Cps -In saturated salt water, after 16 hrs hot rolling at 250F- Max 20 Cps -Filtrate Volume: -In 40 g/lit salt water, millimetres, 16 hrs hot rolling at 250F- Max 10 ml -In saturated salt water, millimetres, 16 hrs hot rolling at 250F- Max 10 ml -Residue greater than 2000m -No Residue -Solubility in 15% HCL- Min 99.5% -Moisture- Max 13.0% -Fermentation test- Min 3 days
Used car parts.
Parts supplies of most vehicles new and used.
Syringes & Needles from Korea. We are authorized distributors for the factory. Please contact us via email or phone to get the best deals & pricing
This deal involves a reseller. Deal too if with Thailand factory. Varies monthly MOQ available. Please feel free to contact us get to know more about this deal.
Used car parts.Importing and exporting, shipping, transporting
Our products include various types of relevant industrial Resins used in paint, Adhesive, ink and wood industries, and to supply requirements of affiliated units inside and outside the country,
A J Services manufacture a selection of a volume control dampers or VCD which have been designed for fitting to the ducting in HVAC systems. Volume control damper help to regulate the air velocity which flows through the ducting which has been connected to a heating, ventilation and air conditioning system being able to regulate the volume of air passing through the ducting means that the rooms or space where the air is distributed will reach desired temperature faster. This means that less energy is used, which will ultimately mean lower energy bills. The dampers are manufactured in a variety of styles depending on the application they will be used within. With options for ducts with both high and low velocities, can be provided in a large number of sizes starting at 50mm with the largest going up to 2000mm. Because ducting changes shape depending on the system it is being implemented in the dampers which are provided reflect this and circular, oval, rectangular and square choices are available, with dampers being produced in galvanised, stainless 304/316 and aluminium. For the larger VCD in the rectangular dampers the blades can appear both in and out of the air stream, however because of the rectangular casing surrounding the larger circular VCD the blades will appear out of stream. These VCD are connected to the ducting via a spigot, so are slotted directly onto the ducting. For the smaller more specialised dampers such as single blade, constant volume and butterfly shutter the blades are most typically put of air stream as the components ergonomic design encompasses the blades inside the main housing of the damper
