Abrashion resistant polyurethane hoses Compared to other plastic hoses in the market, techniflex polyurethane hoses (techni pu) have the following distinguishing characteristics: Compared to rubber hoses, techniflex polyurethane hoses have greater flexibility and lower weight Hoses are more usable at low temperatures because of their flexibility. The risk of bending fracture is lower at low temperatures. They have easy bending characteristics, so that there is no mechanical stress in connection points. Wear is less i. E. About 3 to 4 times better than many soft pvc, 2.5 to 5 times better than rubber and aboutstrength at high temperatures compared to pvc hoses. Polyurethane hoses have the advantage of high elasticity, high tensile strength, high resistance to tear propagation, best resilience and low compression set High compression strength (it provides greater safety due to material stability) It has advantages in case of fire (compared to pvc) Environment friendly. Cost effective due to long usage period. Rubber hoses are usually black and opaque therefore it is not possible to see and control the particles during the transfer process. Techni pu hoses are transparent which provides secure working area. Good chemical resistance Good resistance to uv and weather conditions.
Tunnel mining ventilation hoses The most important factor in tunnel and mining applications is to pres or vacuum the required air into the tunnel or mining areas. Because of the nature of the tunnel/mining areas, there are turning points and sloped areas. In these cases, techniconnect hoses have higher performance. At bending or turning points, the vertical and horizontal section does not change because of the spiral and the pressure loss is very lower. The most effective, safety and practical way of suction the air from tunnel/mining is techniconnect hoses. The advantages of the hoses are; Practical, easy installation with connection elements and hanging apparatus Cross section area does not change in turning or bending points Vacuum is possible Long service life Mechanical endurance factor in underground Benefit/cost ratio is higher Lower pressure loss compared with classic air ducts
Industrial hoses.
Silicone hose.
Weight: 430 Gr/m2 Mukavemetl²: 100kg.F 100kg.F Yirtilma: 5 / 6 Kg.F Standart Boyut: 5 Mt - 10 Mt
Earthmoving machinery spare parts.
Concrete block and interlock making machines.
Marshall Stability Test Machine with Digital Readout Product Code Product Description PRS-AS0055 Marshall Stability Test Machine with Digital Readout Unit, 50 kN, 220-240 V 50-60 Hz PRS-AS0055/110 Marshall Stability Test Machinewith Digital Readout Unit, 50 kN, 110 V 60 Hz PRS-AS0057 Breaking Head (Stability Mould) 4â?� PRS-AS0058 Breaking Head (Stability Mould) 6â?� PRS-AS0060 Linear Potentiometric Displacement Transducer, 25x0.001 mm with bracket for PRS-AS0057 and PRS-AS0058 PRS-AS0063 Indirect Tensile Test Jig for Compacted Bituminous Samples 100 mm (4â?�) & 150 mm (6â?�) Dia. STANDARDS : EN 12697-34, 12697-23, 12697-12 (Method A); ASTM D1559, D5581, D 6927; AASHTO T245 The PRS-AS0055 50 kN Capacity Automatic Marshall Stability Test Machine is used to determine the maximum load and flow values of bituminous mixtures. The machine comprises of a robust and compact two column frame with adjustable upper cross beam. The unit is a bench mounted compression frame with motor and worm gear housed within the base unit. The mechanical jack raises the lower platen at a constant speed of 50.8 mm/min as required in the relevant standard. For safety, the up and down travel of the lower platen is limited the use of limit switches. Rapid adjustment of the platen is controlled using the up and down buttons on the front panel of the machine. The measuring system consists of a 50 kN capacity strain gauge load cell fitted to the upper cross beam to read stability values, the 25 x 0.001 mm linear potentiometric displacement transducer fitted to the Breaking Head and two digital readout units (one for load and another for displacement) The PRS-AS0056 Automatic Marshall Stability Machine is also suitable for testing 6â?� dia. specimens (152.4 mm) conforming to ASTM D5581. The machine can be hand operated by a lateral hand wheel for calibration purposes; the hand wheel is supplied complete with the machine. Platen Speed 50,8 mm/min Capacity 50 kN The PRS-AS0055 Marshall Stability Test Machine is supplied complete with; â?¢ Load Cell, 50 kN â?¢ Linear Potentiometric Displacement Transduce with Bracket, 25x0.001 mm â?¢ Hand Wheel for Manual Control â?¢ Breaking Head, 4â?� Dimensions 550x700x1200 mm Weight (approx.) 102 kg Power 1100 W
Product Code Product Description PRS-AS0400 Ductility Testing Machine, 220-240 V 50-60 Hz PRS-AS0420 Ductility Testing Machine with Cooling Unit, 220-240 V 50-60 Hz PRS-AS0430 Force Ductility Testing Machine, EN 13589, 220-240 V 50-60 Hz PRS-AS0402 Ductility Briquette Mould, ASTM D113 and AASHTO T51 PRS-AS0404 Ductility Mould Base Plate PRS-AS0406 Ductility Mould, ASTM D6084, AASHTO T300 and EN13589 (force measurement ), Brass PRS-AS0408 Ductility Mould, EN 13398 STANDARDS PRS-AS0400 and PRS-AS0420 : EN 13398; ASTM D113, D6084; AASHTO T51 PRS-AS0430 : EN 13589, 13398, 13703; ASTM D113, D6084; AASHTO T51, AASHTO T300 The PRS-AS0400 Ductility Testing Machine is used to determine theductility of bituminous materials in a briquette mould by measuring the breaking elongation at a constant speed of 50 mm/min. It is designed for testing 4 specimens simultaneously. The Internal tank is made of stainless steel. The bath is fitted with an immersion heater in order to obtain (in normal conditions), the 25°C test temperature. Each machine comprises speed control and water circulator to maintain the homogenous water temperature. The PRS-AS0420 Ductility Testing Machine with Cooling Unit has the same specifications with PRS-AS0400 Ductility Testing Machine but with an additional cooling unit and It is not possible to convert PRS-AS0400 to PRS-AS0420 . PRS-AS0430 Force Ductility Testing Machine has 4 loadcells. The accuracy of loadcells are ±0,1N with a maximum capacity of 300 N. The PRS-AS0430 has a cooling unit PRS-AS0430 model is equipped with TFT Graphic Display Automatic Control and Data Acquisition Unit. Failure condition can be down loaded to the Unit. Speed can be set and load-displacement curves are drawn through the software. � Elongation measurement through motor encoder. � 4 simultaneous load measurement with18 bit resolution. � Speed contol with servo AC motor between 0,01 to 100 mm/min. � Ethernet connection for computer interface. Moulds and mould base plates should be ordered separately for all type machine. Dimensions 300x1850x550 mm Weight (approx.) 80 kg Power 350 W
Product Code PRS-EU8050 : Electromechanical Universal Test Machine, 50 kN, 220-240V, 50-60Hz, 1 ph. PRS-EU8300 : Electromechanical Universal Test Machine, 300 kN, 220-240V, 50-60Hz, 1 ph. STANDARDS : EN ISO 6892-1, EN ISO 15630-1 and 2, EN ISO 7500-1 PRS-EU8050, 50 kN and PRS-EU8300, 300 kN capacity fully automatic Electromechanical ParsRos Universal Testing Machines are multi purpose versatile machines which satisfy the requirement of R&D laboratories, university laboratories, institute laboratories and quality control laboratories for tensile, compression flexural tests under load or displacement control for a wide range of materials. PRS-EU8050 and PRS-EU8300 model Electromechanical Universal Testing Machines can be used for tensile test on any material i.e (metal, plastic, textile, wood) by using suitable accessories. Those machines can also be used for general compression, flexural, test on steel, soil, concrete, cement, asphalt and similar materials, by using suitable accessories. These Testing Machines consist of base containing the transmission components and holds two robust columns connected by upper cross head and digital graphics data acquisition and control system. The upper cross head can be adjusted to set the vertical test space for different tests. User can adjust the vertical test space by also lower crosshead moved by an electromechanical system with a single recirculating ball screw, powered by an servomotor. Advanced closed loop control system assures accurate load or displacement pace rate on sample. The load is measured by a load cell that located on upper crosshead and displacement is measured by an encoder fit to the servo motor on both models. The operator will have large flexibility during the test with advanced microprocessor control and material testing software installed on PC. The machine is supplied complete with high precision load cell. Gripping systems, extensometers and accessories are not included and have to be ordered separately. PRS-EU8050 supplied with; � Compression Platens � Load Cells 50 kN Capacity PRS-EU8300 supplied with; Compression Platens Load Cells 300 kN Capacity ACCESSORIES Electromechanical Universal Testing Machines are suitable for difference tests on various materials as Uniaxial Tests, Triaxial Tests, Steel Re-bars, Cement and Concrete, Soil (CBR), Asphalt (Marshall, Indirect Tensile, Duriez), Tiles, Flat Blocks etc. General Accessories; 1.PRSGM-0040 Load Cell, 5 kN Capacity 2.PRSGM-0042 Load Cell, 50 kN Capacity 3.PRSGM-0043 Load Cell, 300 kN Capacity 4.PRSGM-0115 Compression Platens, used to perform uniaxial and unconfined compression tests. 5.PRSM-0500 Extensometer for universal testing machine, 50 mm gauge length, 10 mm travel (to use with max �:22 mm specimens) 6.PRSM-0520 Extensometer for universal testing machine, 50 mm gauge length, 100% strain feature, standard temperature range: -40°C to +100°C (-40°F to 212°F).
Automatic Grinding Machine Product Code Product Description PRS-1040 Automatic Grinding Machine, 220-240 V 50-60 Hz PRS-1042 Grinding Wheel PRS-1035 and PRS-1040 PRS-1043 Cradle for Ã?:38-100 mm Cylindrical Specimens PRS-1044 Water Restraint Panel Set PRS-1048 Water Restraint Panel for dia 160mm Cylinder Specimen
Product Code Product Description PRS-1035 Semi-Automatic Grinding Machine, 220-240 V 50-60 Hz PRS-1042 Grinding Wheel for PRS-1035 and PRS-1040 PRS-1043 Cradle for Ã?:38-100 mm Cylindrical Specimens PRS-1044 Water Restraint Panel Set PRS-1048 Water Restraint Panel for Ã?160mm Cylinder Specimen The PRS-1035 Semi-Automatic Grinding Machine provides fast grinding of cylinder specimen ends to obtain plane and parallel surfaces according to EN and ASTM standards. The ony differance between automatic machine and semi-automatic machie is that the cradle of the semi-automatic machine is moved toward the grinding wheel by user. All grinding process is automatic except the movement of the cradle for semi-automatic machine. The optimum cycle to be applied by user is 5-6 cycle/per minute. The machine is manufactured from stainless steel for resistance to corrosion. The water restraint panels should be ordered seperately for cubic specimens or different sized cylindrical specimens. The Semi-Automatic Grinding Machine is supplied complete with; The preparation of concrete cylinder test specimen for compressive strength test EN 12390-1, 12390-3 ASTM C31, C39, C192, C617 The maximum tolerance on the flatness of the potential load bearing surfaces (the ends of compression test specimens) is 0.002 in. [0.050 mm] The preparation of drilled concrete cores specimen for compressive strength test EN 12504-1, 12390-1, 12390-3 ASTM C42, C397 The deviation of perpendicularity of the side, with reference to O the end faces is 0,5O â?¢ Grinding Wheel for concrete specimens â?¢ Cradle for Ã?:38mm to100 mm cylindrical specimens â?¢ Water restraint panel set f (Consist of four panels Ã?150, 100, 75 and 50 mm) Dimensions 730x1200x1500 mm Weight (approx.) 280 kg Power 1850 W
Product Code Product Description PRS-B1010 Universal Cutting Machine Small, 380 V PRS-B1020 Universal Cutting Machine Junior, 380 V PRS-B1030 Universal Cutting Machine Major, 380 V PRS-B1012 Cutting Blade Ã? 350 mm PRS-B1022 Cutting Blade Ã? 450 mm PRS-B1032 Cutting Blade Ã? 600 mm The PARSROS Series Universal Cutting Machines have been developed to cut and prepare concrete, rock or natural stone cores or other type test specimens. It is available in three different models. Special clamp assembly allows specimens to be held during cutting operation. The machine is supplied complete with â??Vâ?? block clamp for Ã? 100 mm specimens and a water circulation pump. If 220 V is requiered please mension at time of order. Cutting Blade should be ordered separately.
Product Code Product Description PRSâ??A0600 Los Angeles Abrasion Machine (60 Hz version is available upon request) PRSâ??A0600/110 Los Angeles Abrasion Machine 110 V 60 Hz PRSâ??A0601 Los Angeles Abrasion Machine with Soundproof Safety Cabinet 220-240 V 50Hz PRSâ??A0601/110 Los Angeles Abrasion Machine with Soundproof Safety Cabinet, 110 V 60 Hz PRSâ??A0602/E Los Angeles Abrasion Charges EN,12 pcs. PRSâ??A0602/A Los Angeles Abrasion Charges ASTM/AASHTO, 12 pcs. PRSâ??A0605 Soundproof Safety Cabinet for Los Angeles Abrasion Machine The Los Angeles Abrasion Machine is used for determination of the aggregates resistance to fragmentation. The machine consists of an electronic control unit and a rolled steel drum having an inside diameter of 711 mm and internal length of 508 mm. The drum is rotated at a speed of 31-33 r.p.m. The internal shelf provided with the machine confirms to ASTM, AASHTO and EN standards. The machine is equipped with an automatic counter, when the preset revolution count is reached, the machine will stop automatically. The drum is equipped with an interlock device which allows the operator to lock the drum into position for easy loading/unloading of the sample. A steel tray is supplied with the machine for easy discharge of specimen and abrasive charges. The standard model can be supplied with a safety/noise reduction cabinet. The cabinet is lined internally with soundproofing material to reduce sound level conforming to CE directives. The Los Angeles Abrasion Machine is supplied complete with; â?¢ Steel Tray
PRS-EU8050 Electromechanical Universal Test Machine, 50 kN, 220-240V, 50-60Hz, 1 ph. PRS-EU8300 Electromechanical Universal Test Machine, 300 kN, 220-240V, 50-60Hz, 1 ph. PRS-EU8050, 50 kN and PRS-EU8300, 300 kN capacity fully automatic Electromechanical ParsRos Universal Testing Machines are multi purpose versatile machines which satisfy the requirement of R&D laboratories, university laboratories, institute laboratories and quality control laboratories for tensile, compression flexural tests under load or displacement control for a wide range of materials. PRS-EU8050 and PRS-EU8300 model Electromechanical Universal Testing Machines can be used for tensile test on any material i.e (metal, plastic, textile, wood) by using suitable accessories. Those machines can also be used for general compression, flexural, test on steel, soil, concrete, cement, asphalt and similar materials, by using suitable accessories. These Testing Machines consist of base containing the transmission components and holds two robust columns connected by upper cross head and digital graphics data acquisition and control system. The upper cross head can be adjusted to set the vertical test space for different tests. User can adjust the vertical test space by also lower crosshead moved by an electromechanical system with a single recirculating ball screw, powered by an servomotor. Advanced closed loop control system assures accurate load or displacement pace rate on sample. The load is measured by a load cell that located on upper crosshead and displacement is measured by an encoder fit to the servo motor on both models. The operator will have large flexibility during the test with advanced microprocessor control and material testing software installed on PC. The machine is supplied complete with high precision load cell. Gripping systems, extensometers and accessories are not included and have to be ordered separately.
PRSM-4000 Hydraulic Universal Testing Machine,600 kN, 220-240V PRSM-4000/110 Hydraulic Universal Testing Machine, 600 kN, 110V PRSM-4001 Frame for 600 kN Hydraulic Universal Testing Machine PRSM-4002 Hydraulic Grips Jaw Faces Set for Round Specimens PRSM-4003 Hydraulic Grips Jaw Faces Set for Flat Specimens PRSM-0500 Extensometer for Universal Testing Machine, 50 mm Gauge Length (Accuracy 0.01 mm), PRSM-0510 Extensometer for Universal Testing Machine, 100 mm Gauge Length (Accuracy 0.01 mm) PRSM-0520 Extensometer for Universal Testing Machine, 50 mm Gauge Length (Accuracy 0.001 mm) PRSM-4000 Universal Hydraulic Tensile Test Machine is designed to test the ferrous materials for structural values such as yield strength and tensile strength. Apart from tensile tests, Universal Test Machines can also be used for compression tests up to the capacity of the machine. Maximum security is maintained on 600kN capacity Universal Test Machine by limit switch on the lower grip and piston as well as the safety check valves on the hydraulic system. Hydraulic power unit works silently.0-40 mm flat and 8-32 mm round samples can be tested with a user friendly hydraulic jaws that comply with standards. Load cell is used for load measurements. Strain measurement is done by the electronic displacement transducer built in the machine if required external extensometer fitted to the specimen also can be used for strain measurement. Strain measurements can be done directly from the extensometer fitted to the specimen. Tests can be done fully automatic by digital control unit or computer. Machine complete the test with the set pace rate and turns to start position automatically. PRSM-4000 Hydraulic Universal Testing Machine, features two test spaces for tension tests and compression tests. User can quickly change between tension and compression testing without having to remove heavy fixtures. This flexible design also helps to ensure safety, reduces operator effort and improves productivity. The distance between the grips can be set by motor driven hand set system. With open front hydraulic wedge grips user can load specimen easily.
Product Code Product Description PRS-ZE0860 Automatic CBR Test Machine, 220-240 V 50-60 Hz PRS-ZE0860/110 Automatic Digital CBR Test Machine, 110 V 60 Hz The PRS-ZE0860 Automatic CBR Test Machine is designed for performing laboratory evaluation of the CBR value of highway sub-bases and sub-grade, and determination of the strength of cohesive materials which have maximum particle sizes less than 19 mm (3/4â?�). The PRS-ZE0860 is composed of a robust and compact two column frame with adjustable upper crossbeam driven by an electromechanical ram with a maximum capacity of 50 kN and a data acquisition and processing system. The PRS-ZE0860 is designed to load the penetration piston into the soil sample at a constant rate to measure the applied load and piston penetration at predetermined intervals. The ram speed can be set between 0.5 mm/min to 5 mm/min by using the Digital Readout Unit. This main feature allows the user to perform tests complying to BS, EN, ASTM or AASHTO standards with the same machine. Rapid adjustment of the platen is also provided by up and down buttons which are located on the front panel of the machine. The PRS-ZE0860 is supplied complete with a 50 kN load cell, penetration piston, linear potentiometric displacement transducer (25 mm x 0.001 mm), computer software and connection cable. PC is optional. The CBR Test Machine is supplied complete with; â?¢ Load Cell, 50 kN â?¢ Penetration Piston â?¢ Linear Potentiometric Displacement Transducer with Connection Part, 25x0.001 mm â?¢ Computer Software â?¢ Connection Cable
Product Code Product Description PRS-KA1010 Universal Cutting Machine Small, 380 V PRS-KA1012 Cutting Blade Ã? 350 mm STANDARDS : EN 12390â??3, 12504-1; ASTM C42, D4543 The PARSROS Series Universal Cutting Machines have been developed to cut and prepare concrete, rock or natural stone cores or other type test specimens. Special clamp assembly allows specimens to be held during cutting operation. The machine is supplied complete with â??Vâ?? block clamp for Ã? 100 mm specimens and a water circulation pump. If 220 V is required please mention at time of order. Cutting Blades should be ordered separately. Product Code PRS-KA1010 Small Length 1100 mm Width 600 mm Heigth 1300 mm Blade Diameter 350 mm Max. Cutting Heigth 700 mm Cutting Length 700 mm Engine Power 3 hp/220 V Weigth 115 kg Water Pump Power 0.37 hp/220 V
Industrial hoses, silicone hose, hot air duct, high temperature hose, mining ventilation hose, high temperature hose, PVC duct, PVC ducting, spiral flexible, flexible hoses, flexible duct, flexible ducting, flexible duct and hoses, abrasion resistant.
Machine.