It is painted with long-lasting machine paint that is resistant to UV sun rays and can be wiped. The fabrics on it are non-stick, stain-proof, dart series fabric. sponge thickness is 7 cm fabrication cut 27 density sponge. Comfortable to sit and use.
Product Code Product Description PRS-CM0100 Curing Cabinet 750 L, 220-240 V 50-60 Hz STANDARDS : EN 196-1; ISO 679 The PRS-CM0100 Curing Cabinet is used for curing of cement, concrete cubes or other mortar specimens. It can be used for curing cement specimens within the mould, or after removing from the mould. The curing cabinet provides 20 ± 1°C temp. and over 95% RH humidity for cement specimens. Internal chamber and racks are made of stainless steel. The temperature is maintained at 20 ± 1°C by a immersion heater and refrigerator unit which are supplied complete with cabinet. The cabinet is equipped with a digital control unit which controls and monitors the temperature. The humidity is maintained from 95% to saturation by water nebulizers and is also monitored on the digital control unit. Internal Dimension 900x700x1350 mm External Dimension 1100x1000x2200 mm Weight (approx.) 150 kg Power 1200 W
Product Code Product Description PRS-CM0040 Blaine Air Permeability Apparatus PRS-CM0041 U Manometer Tube PRS-CM0042 Manometer Liquid 250 ml PRS-CM0043 Cell with Perforated Disc and Plunger PRS-CM0044 Filter Paper 100 pcs. PRS-CM0045 Filter Paper 1000 pcs. PRS-CM0046 Reference Cement 5 g, ASTM STANDARDS : EN 196-6; ASTM C204; AASHTO T153 The PRS-CM0040 Blaine Air Permeability Apparatus is used to determine the fineness of Portland cement, limes and similar powders expressed in terms of their specific surface. The apparatus is supplied complete with a U manometer tube, manometer liquid, glass connection parts, test stand, rubber aspirator, cell with perforated disc and plunger, plastic funnel and 100 pieces of filter paper. PRS-CM0046 Reference Cement should be ordered separately. The Blaine Air Permeability Apparatus is supplied complete with; â?¢ U Manometer Tube â?¢ Manometer Liquid, 250 ml â?¢ Test Stand â?¢ Rubber Aspirator â?¢ Cell with Perforated Disc and Plunger Plastic Funnel â?¢ Filter Paper, 100 pcs. Dimensions 300x540x210 mm (packed) Weight (approx.) 7 kg (packed)
Air Entrainment Meter for Mortar Product Code Product Description PRS-CM0066 Air Entrainment Meter for Mortar 1 lt. STANDARDS : EN 413-2, 459-2, 1015-7 The PRS-CM0066 Air Entrainment Meter for Mortar is used for determining the air content of cement paste, cement mortar and lime mortar. The air entrainment meter is manufactured from cast aluminum, the upper part and the lower test pot are held together with an air-tight seal which are easily adjusted by using the two spring clamps. The pressure gauge is installed in the head of the meter and the scale works in the 0-20 volumetric % range. The air is compressed with a hand pump installed in the system and the smart configuration of the test and correction buttons enables fast and simple testing. Dimensions 200x200x320 mm Weight (approx.) 3,5 kg
Product Code Product Description PRS-CM0058 Gillimore Apparatus STANDARDS : ASTM C91, C141, C150, C266; AASHTO T154 The PRS-CM0058 Gillmore Apparatus is used to determine the setting time of cement hydraulic hydrometer lime and mortar. Apparatus consists of two horizontally positioned arms, carrying weighted needles, initial needle has a 2.12 mm diameter and 113.4 g in weight and the final needle has a 1.06 mm diameter and 453.6 g in weight. Dimensions 300x100x300 mm Weight (approx.) 2,5 kg
Product Code Product Description PRS-CM0075 Manuel Mortar Mixer, 220-240 V 50-60 Hz PRS-CM0075/110 Manuel Mortar Mixer, 110 V 60 Hz PRS-CM0076 Spare Bowl for PRS-CM0075 and PRS-CM0085, 5 L PRS-CM0078 Spare Beater for PRS-CM0075 and PRS-CM0085 STANDARDS : EN 196-1, 196-3, 413-2, 459-2, 480-1, 1015-2, 12617-4; ASTM C187, C305, AASHTO T129, T131, T162 The PRS-CM0075 Manual Mortar Mixer has a 5 liter (approx.) capacity, it has been designed to mix mortars and cement pastes primarily to the requirements of standards. The mixing paddle revolves at a rate of 140 rpm. with a planetary motion of 62 rpm. in low speed. In high speed, the paddle revolves at the rate of 285 rpm. with a planetary motion of 125 rpm. The user can choose the speeds easily by using the switch fitted to the machine. There is a sand filling apparatus on the mixer to pour sand easily. The bowl and beater are easily fitted and removed from mixer. The Manual Mortar Mixer is supplied complete with; Bowl, 5 L (approx.) Beater Dimensions 300x555x610 mm Weight (approx.) 54 kg Power 200 W
Product Code Product Description PRS-B0950 Large Metal Curing Tank PRS-B0952 Set of Removable Upper Racks for PRS-B0950 PRS-B0954/N Curing Tank Heater for PRS-B0950 and PRS-B0965, 220-240 V 50-60 Hz (3 cm connecting channel and 50 cm resistance length) PRS-B0955 Circulating Pump, 220-240 V 50-60 Hz PRS-B0960 Large Plastic Curing Tank PRS-B0962 Wide Plastic Curing Tank PRS-B0956 Curing Tank Heater for PRS-B0960 and PRS-B0962 , 220-240 V 50-60 Hz (6,5 cm connecting channel and 70 cm resistance length) (If 110V required please indicate on your order) The PRS-B0950 steel, PRS-B0960 and PRS-B0962 Plastic Curing Tanks are designed for curing concrete cubes and cylinders. The temperature can be adjusted and can be kept constant by an electric resistance incorporating a digital thermo regulator which maintains the set temperature between ambient to 40 ºC with ± 2 ºC accuracy. The PRS-B0950 is manufactured from powder coated sheet steel. Suitable upper racks to hold concrete cubes are available on request (max. 8 pieces). PRS-B0960 and PRS-B0962 tanks have a bearer metal carcass. The PRS-B0952 should be ordered separately. All Curing Tanks are supplied complete with; � Heater � Submersible Circulation Pump � Base Metal Racks
PRS-B0980 Accelerated Curing Tank, Ambient to +60°C, 380 V 50 Hz PRS-B0980 Accelerated Curing Tank is designed for curing concrete specimens according to ASTM C1768 (Procedure A - Warm Water Method) and BS 1881:Part 112 (35°C Method and 55°C Method). The Tank consists of an insulated rectangular double walled metal chamber inside lined with stainless steel outer powder coated, an insulated lid with lifting handle to cover the chamber and an stainless steel perforated platform for circulation of water and to support the concrete specimes The tank also has a circulation pomp. to provide the same water temperature at any point within the tank. The tank works ambient to +60°C temperature. The temperature is controlled with closed loop PID controlled digital thermoregulator with accuracy of ±2°C. Curing temperature and curing time can also be set.
Product Code Product Description PRS-B1050 Melting Pot 3 lt. Capacity, 220-240 V 50-60 Hz PRS-B1050/110 Melting Pot 3 lt. Capacity, 110 V 60 Hz The PRS-B1050 melting pot is used for melting the capping compound. The apparatus consists of a 3 litre capacity aluminium container in a well-lagged steel jacket, cover and thermostatic control heating system to keep the temperature constant in the range of ambient to 200 ºC. Dimensions 350x320x290 mm Weight (approx.) 9 kg Power 600 W
Product Code Product Description PRS-B0510 Concrete Flow Table Test Set PRS-B0512 Flow Cone for PRS-B0510 PRS-B0513 Wooden Tamper 40x40x335 mm The test set is used for concrete mixes of high workability and determines flow index as an arithmetic mean of the diameter of the specimen after working on a flow table. The apparatus consists of a double steel table, an upper table measuring 700x700 mm and hinged at one side to the lower table. The top table is inscribed and all parts are protected against corrosion. The stainless steel cone has a 130 ±2 mm top diameter, 200 ±2 mm base diameter and 200 ±2 mm height and 1.5 mm thickness. Dimensions 700x850x300 mm Weight (approx.) 40 kg The Concrete Flow Table is supplied complete with; � Flow Cone � Wooden Tamper
Product Code Product Description PRS-ZE0865 In-situ CBR Test Apparatus PRS-ZE0866 Cutting Collar (edge) for PRS-ZE0865 PRS-ZE0867 Conversion Frame STANDARDS : The PRS-ZE0865 -situ CBR Test Apparatus, 50 kN capacity,is used for the on-site determination of the bearing capacity of soils used in road construction. The set consists of: â?¢ 50 kN capacity mechanical jack with ball seating â?¢ 50 kN capacity load ring â?¢ Analog penetration dial gauge (30 mm travel x 0.01 mm) â?¢ Adjustable dial gauge holder â?¢ CBR Penetration piston â?¢ Set of extension rods (2 pcs. 102 mm, 1 pcs. 305 mm and 1 pcs. 610 mm length) â?¢ Datum bar assembly with two stands â?¢ 4.5 kg annular surcharge weight â?¢ 4.5 Kg slotted surcharge weight â?¢ 9 kg slotted surcharge weight â?¢ Vehicle bracket and wooden carrying case The PRS-ZE0867 Conversion Frame is used to convert the IN-situ CBR test to a mechanical laboratory CBR test machine. The system is easily assembled onto the conversion frame with the addition of some of the accessories included in PRS-ZE0865. The frame is used with the jack, load ring, CBR mould and penetration piston.
Product Code Product Description PRS-ZE0180 Semi-Automatic Penetrometer for Liquid Limit, 220-240 V 50-60 Hz PRS-ZE0180/110 Semi-Automatic Penetrometer for Liquid Limit,110 V 60 Hz PRS-ZE0182 Liquid Limit Penetration Test Cone 30° Angle,Stainless Steel PRS-ZE0183 Cone Test Gauge for PRS-ZE0182 PRS-ZE0184 Liquid Limit Penetration Test Cone 60° Angle,Stainless Steel PRS-ZE0185 Cone Test Gauge for PRS-ZE0184 PRSGH-1425 Moisture Content Tin with Lid �:55 mm x h:35 mm, Aluminum PRSGH-1435 Moisture Content Tin with Lid 75 mm x h:50 mm, Aluminum A Cone Penetrometer is used to determine the moisture content at which clay soils pass from a plastic to a liquid state, and used also for the determination of undrained shear strength. The PRS-ZE0180 Semi-Automatic Penetrometer for Liquid Limit consists of a cast iron base with course and fine leveling screws, a digital penetration measurement gauge 0.01 mm resolution/readibility and an automatic penetration timer unit. The PRS-ZE0180 is equipped with a digital, 99 second timer, which can be set to the standard 5 second free-fall time or to some other setting for customized tests. When engaged the timer will allow the needle to free fall into the sample for the specific time interval and then lock the needle from advancing while providing a direct reading of the test results. 320 g weight should be added to the 30° angle cone to get a total weight of 400 g for the shear strength test. Semi-Automatic Penetrometer for Liquid Limit supplied complete with; � Automatic Penetration Timer Unit, � 30° Penetration Cone � Sample Cups, 3 pcs. Aluminium, �55 mm x h:35 mm.
Product Code Product Description PRS-ZE0665 Spring Type Proctor Penetrometer PRS-ZE0666 Needle Set for Proctor Penetrometer (28.55, 24.79, 20.22, 16.54, 12.83, 9.07, 6.40, 5.23 and 4.52 mm diameters) The PRS-ZE0665 Spring Type Proctor Penetrometer is used for establishing the moisture-penetration resistance relation of finegrained soils. The apparatus consists of a spring loading device which is graduated from 10 to150 lbf in 2 lbf subdivisions. Needle Set for Proctor Penetrometer consist of interchangeable needle points of 28.55, 24.79, 20.22, 16.54, 12.83, 9.07, 6.40, 5.23, 4.52 mm diameters and a carrying case. Dimensions 540x260x60 mm (packed) Weight (approx.) 5 kg
Product Code Product Description PRS-ZE0790 Swell Plate for CBR Swelling Test PRS-ZE0792 Tripod for CBR Swelling Test PRSGM-0120 Analog Gauge 30 mm travel x 0.01 mm division PRSGM-0148 Digital Dial Gauge 25x0,01 mm, LCD Display Data Output PRGM-0152 Digital Dial Gauge 12,7x0,001 mm, LCD Display Data Output PRS-ZE0794 CBR Soaking Tank (6 pcs. CBR Mould Capacity ) STANDARDS : This equipment is used to monitor the swelling by placing it on top of the soil sample. The swell test consists of perforated plate (swell plate) with adjustable stem, dial gauge and dial gauge tripod for mounting swell dial gauge in position on CBR Mould Collar. The prefered gauge and each other equipment should be ordered separately for swelling test.
Aggregate Impact Value (AIV) Testing Apparatus Product Code Product Description PRS-A0650 Aggregate Impact Value (AIV) Testing Apparatus The Aggregate Impact Value Testing Apparatus, meets with BS 812, it is robustly designed to determine the Aggregate Impact Value (AIV) of aggregates which provides a relative measure of the resistance of an aggregate to sudden shock or impact. The counter fitted to the machine automatically records the number of blows delivered to the sample, manufactured from heavy duty plated steel to resist corrosion. The Aggregate Impact Value (AIV) Apparatus is supplied complete with; â?¢ Cylindrical Measure, Ã? 75 mm, â?¢ Steel Tamping Rod, Ã? 16x600 mm Dimensions 450x350x850 mm Weight (approx.) 52 kg
Aggregate Crushing Value (ACV) Sets Product Code Product Description PRS-A0630 Aggregate Crushing Value (ACV) Set Ã? 150 mm BS PRS-A0631 Aggregate Crushing Value Cylinder Ã? 150 mm for PRS-A0630 PRS-A0632 Aggregate Crushing Value Base Plate for PRS-A0630 PRS-A0633 Aggregate Crushing Value Plunger for PRS-A0630 PRS-A0634 Aggregate Crushing Value Cylindrical Measure for PRS-A0630 PRS- A0408 Tamping Rod Ã? 16x600 mm PRS-A0640 Aggregate Crushing Value (ACV) Set Ã? 75 mm BS PRS-A0641 Aggregate Crushing Value Cylinder Ã? 75 mm for PRS-A0640 PRS-A0642 Aggregate Crushing Value Base Plate for PRS-A0640 PRS-A0643 Aggregate Crushing Value Plunger for PRS-A0640 PRS-A0644 Aggregate Crushing Value Cylindrical Measure for PRS-A0640 PRS-A0645 Tamping Rod Ã? 8x300 mm The Aggregate Crushing Value (ACV) Test Set provides a relative measure of the resistance of an aggregate to crushing under a gradually applied compressive load. Each set consists of steel cylinder, plunger, base plate, cylindrical measure and tamping rod. All parts of the apparatus are powder coated or galvanized steel, heat treated and ground before manufacturing to make it durable and reliable. For aggregates smaller than 10 mm, a 75 mm diameter cylinder and associated equipment is available. PRS-A0630 and PRS-A0640 Test Sets are also used for the Ten Percent Fines Value (TFV) of aggregates according to BS 812:111. The Aggregate Crushing Value (ACV) Set is supplied complete with; â?¢ Cylinder, â?¢ Base Plate, â?¢ Plunger, â?¢ Cylindrical Measure â?¢ Tamping Rod Product Code PRS-A0630 PRS-A0640 Dimensions 250x250x600 mm 120x120x350 mm Weight (approx.) 29 kg 6 kg
Product Code Product Description PRS-A0500/E Sand Equivalent Test Set, EN Model PRS-A0500/A Sand Equivalent Test Set, ASTM Model PRS-A0502/E Sand Equivalent Measuring Two Graduated Cylinder, EN PRS-A0502/A Sand Equivalent Measuring Graduated Cylinder, ASTM PRSGH-1425 Moisture Content TinSand Equivalent Measuring Tin with Lid, Aluminium, Ã?:55 mm x h:35 mm PRS-A0506 Sand Equivalent Siphon Assembly PRS-A0507/E Sand Equivalent Test Plunger Assembly,EN PRS-A0507/A Sand Equivalent Weighted Foot Assembly,ASTM PRS-A0515 Washing and Flocculating Solution (Stock Solution), 1 lt The Sand Equivalent test set is used to determine the fines of aggregates. The test set is supplied with 4 transparent acrylic plastic measuring cylinders, siphon assembly (irrigator tube with valve, solid rubber stopper, siphon tube and hose, blow tube) 5 lt. plastic can, weighted foot assembly, measuring can, wide-mouth funnel, and ruler. PRS-A0515 Washing and Flocculating (Stock Solution) should be ordered seperately. The Sand Equivalent Test Set is supplied complete with; â?¢ Transparent Graduated Acrylic Plastic Measuring Cylinder, 4 units for PRS-A0500/A, â?¢ Transparent Acrylic Plastic Measuring Cylinder - 4 units for PRS-A0500/E, â?¢ Siphon Assembly (irrigator tube with valve, solid rubber stopper, siphon tube and hose, blow tube, â?¢ Plastic can - 5 lt. â?¢ Weighted Foot Assembly, â?¢ Measuring Tin, â?¢ Wide-Mouth Funnel, â?¢ Ruler, â?¢ Special Carrying Case, Dimensions 400x550x150 mm Weight (approx.) 4,6 kg
Product Code Product Description PRS-A130 Riffle Box 7 mm PRS-A131 Riffle Box 13 mm PRS-A132 Riffle Box 15 mm PRS-A133 Riffle Box 19 mm PRS-A134 Riffle Box 25 mm PRS-A135 Riffle Box 30 mm PRS-A136 Riffle Box 38 mm PRS-A137 Riffle Box 45 mm PRS-A138 Riffle Box 50 mm PRS-A139 Riffle Box 64 mm PRS-A140 Riffle Box 75 mm STANDARDS : Riffle boxes are used for dividing aggregates into 2 equal homogenous quantity for testing. The Riffle Box is electrostatically painted and manufactured to meet the relevant International standard both in the slot width and number of slots. The Riffle Boxes are supplied complete with; â?¢ Containers with Handles - 3 pcs Product Code Aperture Number of Slots Weight Dimensions PRS-A130 7 mm 12 2 kg 130x180x180 mm PRS-A131 13 mm 12 6 kg 200x250x350 mm PRS-A132 15 mm 12 6.5 kg 200x290x350 mm PRS-A133 19 mm 10 11 kg 220x310x400 mm PRS-A134 25 mm 10 9 kg 250x350x420 mm PRS-A135 30 mm 10 15 kg 230x420x450 mm PRS-A136 38 mm 8 16 kg 320x430x570 mm PRS-A137 45 mm 8 20 kg 320x450x590 mm PRS-A138 50 mm 8 20 kg 320x500x600 mm PRS-A139 64 mm 8 32 kg 360x600x600 mm PRS-A140 75 mm 8 35 kg 370x700x600 mm
Product Code Product Description PRS-A300 Flakiness Index Sieve Set BS PRS-A301 Flakiness Index Sieve BS 4.9x30 mm slot size PRS-A302 Flakiness Index Sieve BS 7.2x40 mm slot size PRS-A303 Flakiness Index Sieve BS 10.2x50 mm slot size PRS-A304 Flakiness Index Sieve BS 14.4x60 mm slot size PRS-A305 Flakiness Index Sieve BS 19.7x80 mm slot size PRS-A306 Flakiness Index Sieve BS 26.3x90 mm slot size PRS-A307 Flakiness Index Sieve BS 33.9x100 mm slot size Aggregate particles are considered as flaky when their thickness is less than 0.6 of their mean sieve size. Aggregate to be classified is separated into seven sieve fractions from 6.3 to 63 mm and each fraction is examined separately. The dimensions of each sieve comply with the relevant International Standard, manufactured from heavy gauge steel sheet and coated with electrostatic paint. The accuracy of the slot size is better than 0.1 mm. PRS-A300 Flakiness Index Sieve Set consists of 7 sieves. For sample preperation 6.3, 10, 14, 20, 28, 37.5, 50 and 63 mm aperture sizes test sieves should be ordered seperately. Product Code Slot Size (wxl) Weight (approx.) Dimensions PRS-A300 4.9x30 mm 1.5 kg 300x220x80 mm PRS-A301 7.2x40 mm 1.6 kg 320x240x80 mm PRS-A302 10.2x50 mm 1.9 kg 300x220x80 mm PRS-A303 14.4x60 mm 2.0 kg 360x260x80 mm PRS-A304 mm 2.2 kg 390x280x80 mm PRS-A305 26.3x90 mm 2.6 kg 420x300x80 mm PRS-A306 33.9x100 mm 2.9 kg 470x320x80 mm
PRSCM-0037 Digital Length Comparator PRSCM-0038 Length Comparator with Length Measuring Sensor 220-240 V 50-60 Hz Length Comparators are used to determine the length changes on different type of cement prisms. The set consists of a length measuring frame with measuring apparatus attached to it. There are 2 models available; PRSCM-0037 is with 0.001 mm x 12,7 mm digital dial gauge and PRSCM-0038 is with special 0.0001 mm x 30 mm transducer and readout unit. Reference rod and moulds should be ordered separately according to the test to be performed. Dimensions PRSCM-0037 180x180x450 mm PRSCM-0038 250x250x650 mm Weight (approx.) PRSCM-0037 6 kg PRSCM-0038 8 kg
