Telecommunications equipment, electronic equipment, coaxial cable and wires.Transportation and shipping
Rock drilling spare parts and mining equipment ..
Caterpillar, volvo, komatsu, hitachi construction machinery parts .Ship
Piston types, gear types, every kind of star type, radyal with palette, hydraulic pump motor, repear and spare part, concrete pump, mixer, tamroc driller group, ingersonland driller, hydraulic system repear and care services.
Production capacity is between 1200 and 1400 pieces per hour and it is able to produce paving stone and briquettes in capacities ranging from 600-750 units. manual, semi-automatic and fully automatic preferred fixed machines.
Production capacity is between 1200 and 1400 pieces per hour and it is able to produce paving stone and briquettes in capacities ranging from 600-750 units. manual, semi-automatic and fully automatic preferred fixed machines.
Production capacity is between 1500-1900 pieces per hour and it is able to produce paving stone and briquettes in capacities ranging from 800-1000 pieces. manual, semi-automatic and fully automatic preferred fixed machines.
Production capacity of 3500-3800 pieces per hour, and it is able to produce paving stone and briquette production capacity between 2000-2500 unites. semi-automatic and fully automatic preferred fixed machines.
Production capacity is between 5000-5500 pieces per hour and it is able to produce briquettes in capacities ranging from 3500-4000 units. manual, semi-automatic and full automatic preferred fixed machines.
This machine consists of a cabin, elevator, seperator, filter, turbines, cyclone and control panel. The materials for shotblasting are placed in a moveable role. The roles running speed is arranged by an electronical speed controller from 1m./min. To 10 m./min. To be able to make a good roughen to the material, steel ball and role speed must be arranged. The steel ball and the sand coming from the helix pour into the elevator and then goes into the seperator with bands and the buckets.The seperator makes the steel balls and the dust to be seperated. The seperated clean balls pour into the turbines again. The dust passes through the filter and air goes out with a fan.The machine is designed for 70 cm width stone. It’s lenght can be arranged. Areas to be used Floor covering and wall boards decorative sanding Marble figures and marble columns sandling Curbstone and outside floor covering sandling Granite and natural stones sandling Packing suitable to road transportation
The benefits : 1. Fractioning down to 0.100 mm (100 micron) 2. Dust removal, protective screening, fractioning 3. High separation precision with up to 99 % screening quality 4. Screening method that is not harmful to the product because of the unique three-dimensional motion Throughput up to 50 t/h. 5. Sizes with diameters from 600 mm, 900 mm, 1350 mm, 2000 mm, and 2600 mm. 6. Screen surface/deck 0.28 m² - 0.64 m² - 1.43 m² 8211; 3.14 m² - 5.30 m² 7. One to 5 decks for 2 8211; 6 fractions 8. Greatest hygienic design for pharmaceuticals and food 9. Special designs such as double screening and double performance are available.
30kgs toner powder capacity. 3 different toner powder tank - min 10 kgs each tank capasity.Lift system for The transport of toner powder. Mixer / spiral(carrier).Heavy metal body painted with anti-electrostatic paint. Power button - start/stop / emergency buttons. Control panel - 15 process entrance. Resistance - moisture meter. Inside and outside the cabin humidity and temperature meter .Changes in internal and external moisture balance. Always keep fresh toner powder without waiting for a change in chemistry due to the toner powder does not. Refill toner powder and dust pollution during the filtration and vacuum system prevents falling with a strong vacuum effect, toner dust particulates are sucked creating a better and cleaner environment. Temperature control panel - air and room temperature stabilization. Resistance system to keep a constant temperature and inside of the machine temperature. 2.10 x 90 x 90 cm
Edge-banding machine EXPERT - 4600 Technical characteristics Voltage/frequency 380 V /50 Hz Amperage 22 A Width of edge band 0.4 - 3 mm Width of the worked wood pieces 10-50 mm Feeding speed 10-20 meters/min. Total power 12,4 Kw Pressure in the machine 6 atm Air consumption 240 lt/min Working height 850 mm Width 920 mm Length 4600 mm Height 1600 mm Weight 2000 Kg The sawing unit (cleans butt ends of the wood pieces before working-optional feature) 2 x 4,5 Kw 5,5 hp 60 hz Speed of sawing unit 4750-5250 dev/dk Head& End saw cutting unit 2 x 0,55Kw / 18000 Rpm Milling unit speed 2 x 0,55 Kw / 18000 Rpm Back channel opening 1,1 Kw / 2800 Rpm Polishing motor 2 x 0,18 Kw / 1400 Rpm WHY EXPERT 4600 Standard equipment All the operations taking place and all the arrangements made on the machine are shown on the electronic PLC monitor. Wide table designed for wide edge-band coils Pneumatic cutter designed to cut bands up to 3mm. Optionally the machine can be equipped by personal computer system. PLC monitor is easy to use. All the functions can be entered quickly and comfortably. Its modern style, absense of errors and easy usage make the machine a convincing equipment that meets the requirements of the customers. SCRATCHING GROUP It is a pneumatic scratching unit consisting of independent upper and lower radial scratchers.The arrangements of thin-thick pvc band from 0.4mm to 2mm are made automatically. BACK CHANNEL CUTTING UNIT t is the unit that is equipped with a jumping saw system that cuts a channel on the bottom sides of the wood pieces worked on the machine. The channel beginning and end arrangements are made on the PLC touchscreen. POLISHING GROUP It consists of two independent motors of 15000 rpm, that perform polishing work. SAFETY SYSTEMS In case when electric phases or air are not provided properly to electrical, electronic or pneumatic equipment of the machine, the safety systems start to work. Safety controls check the feeding line and the breakdown signal is given on the PLC touchscreen. Installation, technical service and personell education These procedures are performed by technical representatives of our company, the way, hotel and other costs of these services are covered by the buyer side. Working height 850 mm Width 920 mm Length 4600 mm Height 1600 mm Weight 2000 Kg
Ink-jet derlin refill&vacuum machine This derlin refills and vacuums HP 23/41/78 type of inkjet cartridge. Derlin Machines are used for the purpose of refilling & vacuuming ink through the nozzles of the cartridge Derlin Machines are not only used for refill machines but also for refilling/vacuuming by hand Derlin Machines are more durable than the plastic refill & vacuum clips, because of their mecanism and raw material
This derlin refills and vacuums lexmark 16/17 type of inkjet cartridge. Derlin machines Derlin machines are used for the purpose of refilling & vacuuming ink through the nozzles of the cartridge Derlin machines are not only used for refill machines but also for refilling/vacuuming by hand Derlin machines are more durable than the plastic refill & vacuum clips, because of their mecanism and raw material
Concrete batching plants and spare parts, concrete pumps and spare parts, truck mixers and spare parts, tower cranes and spare parts.
Atlas copco& sandvik, tamrock, furukawa & montabert drifters spare parts.
ZIM 1536 PLUS Block and Paverstone Machine is special design machine for block and interlock production that works fully automatic.The movement of the machine is programmed the PLC microprocessor computer. By changing moulds all kinds of blocks, paverstones, curbstones, grass stones, lentos and precast concrete elements can be produced in a serial way. 20cm block can be produced 15, interlock paverstones can be produced 36 units in one press. Machine is able to produce the insulated block upon demand. Thanks to special features developed by our engineers machine have very short cycle time. For example mould changing is wery easy and take short tme in new system. Automation system and operator panel which is developed and redesigned in long years become user friendly and useful. With our special design vibration table you can produce high quality products with less energy. We use pneumatic bellows in machine mould connections, due to this system vibration on mould is expanded regular and uniform. Service and maintenance is easy thank to our strong machine chassis and ergonomic design
Drilling, drilling and blasting, drilling machine, rock drill, rock drill machine, mining machine, rock drill spare, furukawa , atlascopco, sandvik spare part, montabert spare part, furukawa spare part, atlascopco spare part, sandvik, montabert, drill machine, machine spare part, boomer281, boomer282, boomerl2d, boomers1d, dx600, dx680, dx700, hd712 spare part, hd712, oem spare part, parts service, hydraulic drifter, drill rig, drill rig spare part, drifter spare part, underground drill, underground drill rig spare part.
Underground And Surface Machinery, Drilling Rigs.
