Product Code Product Description PRS-A0445 Shape Index Caliper Shape Index Caliper is used for the determination of the shape factor of aggregates. Measurement range is 200 mm and graduated with 0.05 mm increments. Dimensions 450x150x50 mm Weight (approx.) 0,4 kg
Product Code Product Description PRS-A0440 Efflux Index Apparatus (Flow Coefficient of Fine Aggregates), EN PRS-A0440 Efflux Index (Flow Coefficient of Fine Aggregates) Apparatus is used to obtain information about the shape and the angularity of grains of fine aggregates. The flow coefficient of an aggregate is the time, expressed in seconds, for a specified volume of aggregate to flow through a given opening, under specified conditions using a standard apparatus. Efflux Index (Flow Coefficient of Fine Aggregates) Apparatus consist of two funnels with different opening, cylindrical hopper, metal stand with a shutter and metal container. Dimensions 150x180x410 mm Weight (approx.) 5 kg
Product Code Product Description PRS-A0445 Length Gauge (Elongation Index BS) Length Gauge (Elongation Index BS), is used for determining the elongation index of aggregates. The particle is elongated when its length (longest dimension) is more than 1.8 o the midsize of the sieve fraction. The aggregate to be classified is separated into six sieve fractions from 6.3 to 50 mm and each fraction is examined separately. Dimensions 370x70x70 mm Weight (approx.) 0,82 kg
Product Code Product Description PRS-A0885 Reference Colours Glass PRSGG-1705 Graduated Impurities Test, Glass Bottle 500 ml, ASTM PRSGG-1710 Graduated Impurities Test, Glass Bottle 1000 ml, ASTM PRSGG-1720 Cylindrical Glass Bottle with Cork Stopper, for Organic Impurities, 450 ml,EN PRSGC-0840 Sodium Hydroxide 1 kg The Reference Colour Glass consists of 5 organic glass scales mounted in a plastic holder, which is used for the comparison of the colour results from the relevant test. The 500 ml and 1000 ml capacity Graduated Glass Bottles are used for making reference standard colour and test solution according to the ASTM standard. PRSGG-1720 450 ml Cylindrical Glass Bottle is used for determination of organic impurities as required in the EN standard.
Product Code Product Description PRSGE-AS0080 Marshall-CBR-Proctor Specimen Extruder, 30 kN Capacity STANDARDS : EN 12697-30, 13286-2, 13286-47 AASTHO T245, T134, T180,T193; ASTM D1559, D698, D1557, D1883; BS 598-107, 1377-4, 1924-2 The specimen extruder is designed to easily extrude specimens from Marshall, CBR, standart and modify Proctor Moulds. The capacity of the extruder is 30 kN. Supplied complete with a manual hydraulic jack and 2 pcs. adaptor to extrude specimens from 100mm (4 â??), 150 mm (6â?�) inner diameter marshall, CBR standard and modified proctor, moulds. Technical Specifications Ram Travel 130 mm Screw Travel 90 mm Dimensions 280x280x520 mm Weight (approx.) 28 kg
Product Code Product Description PRS-AS0061/E Marshall Compaction Mould for Impact Compactor with Wooden Pedestal, EN, 101.6 mm PRS-AS0061/A Marshall Compaction Mould ASTM 4â?� PRS-AS0062 Marshall Compaction Mould ASTM 6â?� PRS-AS0064 Marshall Storage Plate for 6 pcs. for 4â?� (101.6mm) specimens STANDARDS : EN 12697-30; ASTM D1559, D6926, D5581; AASHTO T245 The Marshall Compaction Moulds are used to produce the Marshall specimens with automatic or manual compactors. The moulds are manufactured using galvanized steel. The Compaction Moulds consist of a base plate, mould body and a collar. The Marshall Storage Plate is designed to store 6 pcs , 4â?� diameter Marshall specimens. Product Code Dimensions Weight (approx.) PRS-AS0061/E-A Ã?120x170 mm 3,5 kg PRS-AS0062 Ã?175x210 mm 6 kg PRS-AS0064 250x500x70 mm 6 kg
Product Code Product Description PRS-AS0056 Automatic Marshall Stability Test Machine, 50 kN, 220-240 V 50-60 Hz PRS-AS0056/110 Automatic Marshall Stability Test Machine, 50 kN, 110 V 60 Hz PRS-AS0057 Breaking Head (Stability Mould) 4â?� PRS-AS0058 Breaking Head (Stability Mould) 6â?� PRS-AS0060 Linear Potentiometric Displacement Transducer, 25x0.001 mm with bracket for PRS-AS0057 and PRS-AS0058 PRS-AS0063 Indirect Tensile Splitting Device for Compacted Bituminous Samples 100 mm (4â?�) Dia. STANDARDS : EN 12697-34, 12697-23, 12967-12 (Method A and Method B up to 51 mm/min); ASTM D1559, D5581, D 6927; AASHTO T245 The PRS-AS0056 50 kN Capacity Automatic Marshall Stability Test Machine is used to determine the maximum load and flow values of bituminous mixtures. The machine comprises of a robust and compact two column frame with adjustable upper cross beam. The unit is a bench mounting compression frame with motor and worm gear housed within the base unit. The speed of the lower platen can be adjusted between 6 mm/min to 60 mm/min using the Data Acquisition and Control Unit. For safety, the up and down travel of the lower platen is limited the use of limit switches. Rapid adjustment of the platen is controlled using the up and down buttons on the front panel of the machine. The machine can be hand operated by a lateral hand wheel for calibration purposes. The measuring system consists of a 50 kN capacity strain gauge load cell fitted to the upper cross beam to read stability values and the 25 x 0.001 mm linear potentiometric displacement transducer fitted to the Breaking Head. The PRS-AS0056 Automatic Marshall Stability Machine is suitable for testing 6â?� dia. specimens (152.4 mm) conforming to ASTM D5581.
Marshall Stability Test Machine with Digital Readout Product Code Product Description PRS-AS0055 Marshall Stability Test Machine with Digital Readout Unit, 50 kN, 220-240 V 50-60 Hz PRS-AS0055/110 Marshall Stability Test Machinewith Digital Readout Unit, 50 kN, 110 V 60 Hz PRS-AS0057 Breaking Head (Stability Mould) 4â?� PRS-AS0058 Breaking Head (Stability Mould) 6â?� PRS-AS0060 Linear Potentiometric Displacement Transducer, 25x0.001 mm with bracket for PRS-AS0057 and PRS-AS0058 PRS-AS0063 Indirect Tensile Test Jig for Compacted Bituminous Samples 100 mm (4â?�) & 150 mm (6â?�) Dia. STANDARDS : EN 12697-34, 12697-23, 12697-12 (Method A); ASTM D1559, D5581, D 6927; AASHTO T245 The PRS-AS0055 50 kN Capacity Automatic Marshall Stability Test Machine is used to determine the maximum load and flow values of bituminous mixtures. The machine comprises of a robust and compact two column frame with adjustable upper cross beam. The unit is a bench mounted compression frame with motor and worm gear housed within the base unit. The mechanical jack raises the lower platen at a constant speed of 50.8 mm/min as required in the relevant standard. For safety, the up and down travel of the lower platen is limited the use of limit switches. Rapid adjustment of the platen is controlled using the up and down buttons on the front panel of the machine. The measuring system consists of a 50 kN capacity strain gauge load cell fitted to the upper cross beam to read stability values, the 25 x 0.001 mm linear potentiometric displacement transducer fitted to the Breaking Head and two digital readout units (one for load and another for displacement) The PRS-AS0056 Automatic Marshall Stability Machine is also suitable for testing 6â?� dia. specimens (152.4 mm) conforming to ASTM D5581. The machine can be hand operated by a lateral hand wheel for calibration purposes; the hand wheel is supplied complete with the machine. Platen Speed 50,8 mm/min Capacity 50 kN The PRS-AS0055 Marshall Stability Test Machine is supplied complete with; â?¢ Load Cell, 50 kN â?¢ Linear Potentiometric Displacement Transduce with Bracket, 25x0.001 mm â?¢ Hand Wheel for Manual Control â?¢ Breaking Head, 4â?� Dimensions 550x700x1200 mm Weight (approx.) 102 kg Power 1100 W
Product Code Product Description PRS-AS0140/A Bitumen Oven for Rolling Thin-Film Oven Test (RTFOT), ASTM 220-240 V 50-60 Hz PRS-AS0140/E Bitumen Oven for Rolling Thin-Film Oven Test (RTFOT), EN 220-240 V 50-60 Hz PRS-AS0142 Spare Glass Container for PRS-AS0140 PRSGE-AS3572 Air-Drying Unit for PRS-AS0140 STANDARDS : EN 12607-1; ASTM D2872; AASHTO T240 PRS-AS0140 Bitumen Oven is used for determination of the resistance to hardening of semisolid asphaltic materials/ bitumen or bituminous binders under the combined effects of heat and air with the rolling thin-film oven test (RTFOT) method. The Internal chamber of PRS-AS0140 Bitumen Oven is manufactured from stainless steel, insulated with fiberglass or similar, the door has a symmetrically located window. The oven has a programmable temperature controller which works in PID mode and digital display system. A temperature sensor is used instead of the ASTM 13C thermometer. The temperature can be read from the digital unit placed on the oven. Over tempereture controlled by a mechanic switch. Conforming to the CE Directives. Air Compressor and Air-Drying Unit (PRSGE-AS3572) should be ordered separately. Maximum pressure should not exceed 2 bar when an air compressor is used. The Bitumen Oven for RTFOT is supplied complete with; â?¢ Glass Comtainers, 8 pcs. Dimensions 800x700x750 mm Weight (approx.) 62 kg
Product Code Product Description PRS-AS0400 Ductility Testing Machine, 220-240 V 50-60 Hz PRS-AS0420 Ductility Testing Machine with Cooling Unit, 220-240 V 50-60 Hz PRS-AS0430 Force Ductility Testing Machine, EN 13589, 220-240 V 50-60 Hz PRS-AS0402 Ductility Briquette Mould, ASTM D113 and AASHTO T51 PRS-AS0404 Ductility Mould Base Plate PRS-AS0406 Ductility Mould, ASTM D6084, AASHTO T300 and EN13589 (force measurement ), Brass PRS-AS0408 Ductility Mould, EN 13398 STANDARDS PRS-AS0400 and PRS-AS0420 : EN 13398; ASTM D113, D6084; AASHTO T51 PRS-AS0430 : EN 13589, 13398, 13703; ASTM D113, D6084; AASHTO T51, AASHTO T300 The PRS-AS0400 Ductility Testing Machine is used to determine theductility of bituminous materials in a briquette mould by measuring the breaking elongation at a constant speed of 50 mm/min. It is designed for testing 4 specimens simultaneously. The Internal tank is made of stainless steel. The bath is fitted with an immersion heater in order to obtain (in normal conditions), the 25°C test temperature. Each machine comprises speed control and water circulator to maintain the homogenous water temperature. The PRS-AS0420 Ductility Testing Machine with Cooling Unit has the same specifications with PRS-AS0400 Ductility Testing Machine but with an additional cooling unit and It is not possible to convert PRS-AS0400 to PRS-AS0420 . PRS-AS0430 Force Ductility Testing Machine has 4 loadcells. The accuracy of loadcells are ±0,1N with a maximum capacity of 300 N. The PRS-AS0430 has a cooling unit PRS-AS0430 model is equipped with TFT Graphic Display Automatic Control and Data Acquisition Unit. Failure condition can be down loaded to the Unit. Speed can be set and load-displacement curves are drawn through the software. � Elongation measurement through motor encoder. � 4 simultaneous load measurement with18 bit resolution. � Speed contol with servo AC motor between 0,01 to 100 mm/min. � Ethernet connection for computer interface. Moulds and mould base plates should be ordered separately for all type machine. Dimensions 300x1850x550 mm Weight (approx.) 80 kg Power 350 W
Product Code Product Description PRS-AS0137 Fraass Breaking Point Apparatus PRS-AS0138 Stainless Steel Plaque for PRS-AS0137 Frass Apparatus (pack of 10) PRS-AS0139 Dry Ice Maker STANDARDS : EN 12593 The PRS-AS0137 Breaking Point Apparatus is used to determine the breaking point of solid and semisolid bitumen. The Fraass Breaking Point is the temperature at which bitumen first becomes brittle, as indicated by the appearance of cracks when a thinfilm of the bitumen on a metal plaque is cooled and flexed in accordance with specified conditions. The apparatus consists of stainless steel plaque, cooling and bending apparatus, thermometer IP 42C (-38°C/+30°C), plate and stand. Dimensions PRS-AS0137 100x100x300 mm PRS-AS0139 400x600x650 mm Weight (approx.) PRS-AS0137 3 kg PRS-AS0139 20 kg
Product Code Product Description PRS-ASKW00126 Kinematic Viscosity Apparatus STANDARDS : ASTM 2170,AASHTO T201,EN 12595 The temperature, from room temperature to 135°C, remains constant within ± 0.1°C. Electric stirrer, electric heater and cooling (COIL) system. Digital read-out and regulation of temperature. Safety device for temperature and water level with alarms. 19 litre bath in pyrex glass with external protection in plexiglass. Support base with housing seats. Capacity: Five viscometers to be ordered separately according to viscosity. Dimensions 300 x 300 x 500 (h) mm. Power supply 220 V, 50 Hz, single phase, 1700 Watts Weight 12 kg.
Product Code Product Description PRS- CM0065 Plunger Penetration Apparatus STANDARDS : EN 413-2, 459-2, 1015-4 Plunger Penetration Apparatus is used to determine the consistency of fresh mortar, building lime and masonry cement. The test apparatus consists of a base to place the test cup and a vertical column holding the penetration plunger assembly. The drop default height is adjusted to 100 mm. The plunger assembly weight is 90 g. The Plunger Penetration Apparatus is supplied complete with; â?¢ Test cup, Ã? 80 mm x 70 mm â?¢ Tamper Dimensions 200x200x600 mm Weight (approx.) 6 kg
Product Code Product Description PRS-CM0010 Le Chatelier Mould PRS-CM0014 Le Chatelier Soundness Kit STANDARDS : EN 196-3, 450-1, 459-2; EN ISO 9597 The soundness of cement, fly ash for concrete and lime is determined by using the Le Chatelier moulds and Le Chatelier Water Bath (PRS-CM0016) according to the relevant standard. The Le Chatelier Soundness Kit is supplied complete with; â?¢ Le Chatelier moulds 3 pcs. â?¢ 50x50 mm glass plates 6 pcs. â?¢ 300 gr Weights 1 pcs. â?¢ 100 gr Weight, 3 pcs. â?¢ Tamping Rod 17 mm dia. x 70 gr â?¢ Steel Ruler â?¢ Plastic Carrying Case Dimensions 340x290x80 mm Weight (approx.) 2 kg
Product Code Product Description PRS-CM0050/A Vicat Test Set EN PRS-CM0050/E Vicat Test Set ASTM PRS-CM0051 Vicat Apparatus (Frame) PRS-CM0052/E Vicat Mould EN Base ID 80 mm, Top ID 70 mm, Height 40 mm PRS-CM0052/A Vicat Mould ASTM Base ID 70 mm, Top ID 60 mm, Height 40 mm PRS-CM0053/E Initial Vicat Needle EN 1.13 mm dia. PRS-CM0053/A Vicat Needle ASTM 1 mm dia. PRS-CM0054 Final Vicat Needle EN 1.13 mm dia. PRS-CM0055 Consistency Plunger 10 mm dia. PRS-CM0056 Supporting Glass Plate PRSTAS-0121 Transfer Dish for PRSTAS -0120 and PRS-CM0050 PRSGT-1305 Glass Thermometer Max. 110°C PRSC-CM0057 Additiniol Weight, 700 gr, EN 480-2 STANDARDS : EN 196-3, 480-2; ASTM C187, C191; AASHTO T129, T131 The Vicat Test Set is used for the determination of the setting time and consistency of cement by Vicat Method. PRSTAS -0121 Transfer Dish which is used as a Water Wessel EN, for layering the vicat mould under water. The Vicat Test Set is supplied complete with; � Vicat Mould � Initial and final Needles (for EN ) � Vicat Needle (for ASTM) � Consistency Plunger � Supporting Plate � Glass Thermometer � Transfer Dish (for EN) Dimensions 150x190x318 mm Weight (approx.) 3 kg
Product Code Product Description PRS-CMA0050 Automatic Vicat Apparatus STANDARDS : EN 196-3:2005; EN 13279-2 (GYPSUM);EN 480-2 /ASTM C187, ASTM C191 The Vicatronic apparatus, that is designed and manufactured using the most recent and sophisticated technology, is used for the initial and final setting time determination of cements or mortar pastes.Movements along X Y Z axes Up to 30 different test types may be programmed and over 1000 tests may be memorized. PC Port Initial and final setting time (in 0.1 mm) Automatic cleaning of the needle Automatic stop and storage of measurements up to 50 tests. Plunger for initial consistency Thermostatic baths (optional) GLCD display for data input and diagram/test report.Printer for final test report and diagram RS 232 serial port for PC connection Moulds and further needles have to be ordered separately, according to the various standards. Power supply 220 V, 50 Hz, single phase. Weight 40 kg.
Product Code Product Description PRS-CM1462 Muffle Furnace 5 lt. 1200°C Max. Temperature with Programmable Timer, 20-240 V 50-60 Hz STANDARDS : EN 196-2; ASTM C25, C115 PRS-CM1462 Muffle Furnace is used for determining the loss on ignition and insoluble residue of cement and building lime. Working temprature and time can be programmed with PID digital control system. Digital Thermometer Features Temperature Controller PC 442/2 Max. Temperature 1200 °C Max. Continuous Temperature 1150 °C Temperature Deviation at Set Point ± 2°C Heat Up Time to Max. Temperature 50. min Internal Volume 5 L Phase 1 Internal Dimension 140x180x200 mm External Dimension 650x550x580 mm Weight (approx.) 56 kg Power 2000 W
Product Code Product Description PRS-ZE0900 Sand Replacement Test Set 100 mm BS PRS-ZE0901 Sand Pouring Cylinder 100 mm dia. for PRS-ZE0900 PRS-ZE0902 Calibration Container for PRS-ZE0900 PRS-ZE0903 Metal Tray for PRS-ZE0900 PRS-ZE0910 Sand Replacement Test Set 150 mm BS PRS-ZE0911 Sand Pouring Cylinder 150 mm dia. for PRS-ZE0910 PRS-ZE0912 Calibration Container for PRS-ZE0910 PRS-ZE0913 Metal Tray for PRS-ZE0910 PRS-ZE0920 Sand Replacement Test Set 200 mm BS PRS-ZE0921 Sand Pouring Cylinder 200 mm dia. for PRS-ZE0920 PRS-ZE0922 Calibration Container for PRS-ZE0920 PRS-ZE0923 Metal Tray for PRS-ZE0920 STANDARDS : BS 1377:9, 1924:2 The Sand Replacement Test Set is used for the determination of the degree of compaction on site. The Complete set consists of a pouring cylinder, calibration container and tray. The sand pouring cylinder is made of cast aluminum and precisely machined; the calibration container and tray are made of plated sheet steel. The test set is available in three different sizes. Product Code Dimensions Weight (approx.) PRS-ZE0900 300x300x440 mm 8 kg PRS-ZE0910 300x300x500 mm 14 kg PRS-ZE0920 500x500x660 mm 27 kg
Product Code Product Description PRS-ZE0950 Sand Cone Set 6.5" PRS-ZE0960 Sand Cone Set 12" PRS-ZE0952 Plastic Sand Jar 5 L, for PRS-ZE0950 PRS-ZE0962 Density Cylinder, 12" STANDARDS : ASTM D1556; AASHTO T181, T191 The PRS-ZE0950 and PRS-ZE0960 Sand Cone Sets are used for the determination of the degree of compaction on site. PRS-ZE0950 includes double cone, plastic sand jar and metal tray with flanged hole. PRS-ZE0962 Density Cylinder is used for determining in place density of compacted base courses containing large sizes of coarse aggregates. Product Code Dimensions Weight (approx.) PRS-ZE0950 300x300x550 mm 4 kg PRS-ZE0960 600x600x650 mm 15 kg PRS-ZE0962 470x320x260 mm 10 kg
Product Code Product Description PRS-ZE0000-02 Direct Shear Test Machine ( Digital ) STANDARDS : TS 1900-2,ASTM D3080,BS 1377-7,AASHTO T236,NF P094 071-1/2 The System is capable of performing the consolidation and shearing phases of a standard direct shear and residual shear test under full automatic control. The system consists of a computer-controlled unit that utilizes micro-stepper motors to apply the vertical and horizontal loads to the soil specimen. The system is capable of doing a consolidation process at 32 phase automatically. Horizontal shearing can be applied at a specified rate of deformation or at a specified rate of horizontal force change, or at a specified set of force steps of a specified duration. The system is capable of displaying the current status of a test and graphically portraying the progress of the test in real time. The system includes the capability for the operator to alter the test process and conditions at any stage of the test. Technical Specifications Capacities 2.5 Kn, 5 Kn or 10 Kn Vertical Engine Stepper engine with built-in controls for vertical load Horizontal Engine stepper motor with built-in controls for horizontal load Speed Range 0.00003 to 15 mm per min. Horizantal Travel +125 mm Vertical Travel 12.5 mm Power supply 220-240 V 1 ph 50 Hz 750 W Dimensions: 228 x 560 x 762 mm
