Size: - Length*width: 100*200cm. - Thickness: 10mm. Others dimensions according to the customer requirements. Weight: 15.5 â?? 17 kg. Features: - Have anti-slip, water drainage, anti-fatigue and anti-shatter properties. - Easy to clean and install. - Insulates against cold and damp. - The mat holes could be opened or closed according to the customer requirement. - This mat has done excellent work in kitchens, food processing plants, locker/shower rooms and behind bars and running floors. Physical Specifications: - Tensile min. : 5 N/m2. - Elongation at break (%) min.: 333. - Hardness (Shore A): 535+. Material: SBR Rubber Applications: Airports, Anti-Slip Protection, Balcony Floor Surfacing, Buses, Commercial Vehicles, Campsite Walkways, Catered Events, Concert Staging, Construction Sites, Commercial Entrance Mat, Deck Flooring, Dog Friendly Flooring, Fishing Boats. - Garage Floor Mat, Golf Courses, Horse Trailer Mat, Hotels, Indoor/Outdoor, Industrial Shelves, Long Doormat, Medical Buildings, Movie Sets. - Office Building, Outdoor Doormats, Party Rental Companies, Patio Floor Mats, Scraper Mats, Shelf Liners, Shop Matting, Skating Rinks, Spike Proof Applications, Storage Rooms, Toolbox Liners, Trailer Floor Covering, Van Rubber Flooring, Vibration control, Warehouses, Wet Areas, Work Areas, Running Floors. Color: Standard: Black. Other colors can be customized. The way of installation: It can be sticked on the ground with or without glue.
Dimensions: - MC001AVM: Dia: 44* Height: 41 mm - MC002AVM: Dia: 44* Height: 44 mm (with steel base thickness 3mm & Dia. 50mm) Features: Easy-to-install Universal Mounts - Provide fail-safe, all-attitude isolation for vehicle cabs, engines, transmissions and other equipment. - Designed for shock load damping. - It withstands up to 50 kg per piece and must be installed on a circular fitting base. Physical Specification: - Hardness (Shore A): 40 - 80 - Tensile Strength (MPa): 4 min. - Elongation at break (%): 280 min. Color: Standard: Black Applications: - Anti-vibration Rubber. - Noise Absorption Rubber. - Engine, Generator, Motor, Compressor, etc
Dimensions: 450*350 mm - Thickness: 20mm And many different sizes according to customer requirements Purpose: Anti-Vibration Pads are a simple yet effective solution to absorb vibration, and impact and reduce noise from various types of machinery. Using an Anti-Vibration Pad correctly can often be the most cost-effective way to address a high-frequency vibration Material: Mix from SBR and Natural Rubber Physical Specification: - Hardness: 65 + 5 - Tensile: 3.5 N/mm2 - Elongation: 300% Applications: Appropriate for machinery requiring anti-vibration performance and stability performance Color: Black
Size: - Length*Width: 150*150 cm. - Thickness: 12mm Advantage of this Tille: - Excellent slip resistance, water resistance, - Resistance to heavy impact loads, sound absorbent. Indoor flooring: - Does not react to weather conditions. - It has no negative effect on children if directly touched according to our customer feedbacks. - Endurance is more than 2 tons per square meter. Color: Black. Applications: - It is used in sport halls and locations that need Shock absorbers and safety flooring. - It is used in kidsâ?? areas and schools. Material: SBR Rubber mixed with PU Binder Life span: 5:10 years - according to the use
Specification: Water resistant, UV resistant and Heat tolerance is 70. - Lightweight and durable. - Fixed color â?? not dissolvable in water - Available in many colors ( Blue â?? grey â?? Red ) Application: - This rubber is used in the upper layer for paving playgrounds and other floorings - Kids Flooring. Storage: Store in dry conditions and keep away from any sources of heat and ignition. Material: SBR Relative density : 02. 0 �± 1.14 gm/cm�³ Size: - (2-1) mm - (4-1) mm
Dimensions: Width: Up to 1500mm Length: Up to 50 m. Thickness: 1.5 - 50 mm. General Description: EPDM rubber (ethylene propylene diene monomer rubber) is an elastomer that is characterized by wide range of applications and good chemical resistance. Features: Chloramine resistant Good heat and compression resistance. Resistant to ketones, hot and cold water, steam, alkalis, polar solvents,ozone, sunlight, alcohols, glycol engine coolant and Skydrol (phosphate ester hydraulic fluid). Resistant for air conditions. Applications: Automotive: Weather stripping and seals. Wire and cable harnesses. Window spacers. Hydraulic brake systems. Door, window and trunk seals Roofing: Roof membrane. Roof coating. RV roof. Industrial: Water system O-rings and hoses. Tubing, grommets, and belts. Electrical insulations and stinger covers.
Description: MARSO CLM COL Gard is designed to protect the edges of columns in structures. Materials: MARSO CLM Col Gard is made of a high impact resistance extruded rubber profile. Standard color is black. Yellow reflective cover strips are available on request. Range of sizes: The gard is available with or without galvanized metal insert clips with various dimensions. Standard lengths: The standard lengths of MARSO CLM Col Gard are 1 meter and 1.2 meters. Other sizes can be provided upon request. Installation: Place clip on the wall at a distance of 100 or 150 mm from the finished floor level and mark the holes positions on the wall. * Drill holes in the wall by using suitable drill bits. * Fasten the clip to the wall using M6/M8 screws and plastic plug. * Slide the rubber gard from the sides. Clean the Corner gard using dry cloth to clear dust. Alternatively they can be fixed to the column surface using the BASF epoxy resin Wing Length CLM65: A=65 , B=65 CLM: with clips AD: without clips adhesive type
Dimensions: - Width*Length: 11cm * 3.2m : 8cm * 3.2m - Thickness: 2cm Description: To prevent low of water past a closed gate, seals are provided either on the gate or on the metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic, deforms readily and regains its original shape on removal of load. Material: - EPDM. - Screwed + held by steel sandwich. Physical Specification: - Hardness Shore A: 60 - 70 - Tensile (kg/cm2) : 100 kg/cm2 - Elongation at break %.: 450% - Color: Black Applications: Water Preventative in rivers Dams
Dimensions: Width*Length: 15cm * 13m : 2.5cm * 13m - Thickness: 1 cm Description: To prevent flow of water past a closed gate, seals are provided either on the gate or on the metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic, deforms readily and regains its original shape on removal of load. Material: - EPDM. - Screwed + held by steel sandwich. Physical Specification: - Hardness Shore A: 60 - 70 - Tensile (kg/cm2) : 100 kg/cm2 - Elongation at break %.: 450% - Color: Black Applications: Water Preventative in rivers Dams
Dimensions: - Width*Length: 20cm * 12m - Thickness: 1 cm Description: - To prevent flow of water past a closed gate, seals are provided either on the gate or on the metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic, deforms readily and regains its original shape on removal of load. Material: - EPDM. - Screwed + held by steel sandwich Physical Specification: - Hardness Shore A: 60 - 70 - Tensile (kg/cm2) : 100 kg/cm2 - Elongation at break %.: 450% - Color: Black Applications: Water Preventative in rivers Dams
Dimensions: - 650mm * 1000mm - Thickness of Rubber: 6mm Description : It consists of -2layers a bottom layer from rubber and a top layer from textile and putting a disinfectant to freak the leg before entering any place to protect from germs Purpose: Disinfectant Mat to protect homes, hospitals and companies from germs, viruses and bacteria Materials: Bottom layer from natural and SBR rubber mix, top layer from Absorbing textile. Physical Specification: Hardness: 5 �± 40 - Tensile: 3.5 N/mm2 - Elongation: %300 - Color: Black Applications: Homes, Hospitals and companies entrance.
Size: - 200x160x25mm Features: - Excellent slip resistance, water resistance, - Resistance to heavy impact loads. - Does not react to weather conditions. - It has no negative effect on children if directly touched. - Easy to install over a concrete base area. - Springy and comfortable underfoot. - Its interlocking design can installed without adhesive in mild traffic areas, has good stability and can be expanded indefinitely and covering large areas. Application: - Excellent slip resistance, water resistance, - Resistance to heavy impact loads. - Does not react to weather condiotins. - It has no negative effect on children if directly touched. - Easy to install over a concrete base area. - Springy and comfortable underfoot. - Its interlocking design can installed without adhesive in mild traffic areas, has good stability and can be expanded indefinitely and covering large areas. - Entryways kidsâ?? area, Walks and Driveways. - Horse barn, corridors, wash bays saddling areas, paddock areas, path. - Balcony, courtyard, platform bridge, patio, garage, home use. - Gym, fitness center, sport center, stud-farm. Material: - Top layer from 7mm colored SBR + 20 % EPDM granules - Bottom layer from 18mm black SBR. Color: - Bottom layer Black color. - Top layer Red & Green & Blue and Grey color. Life span: - 5:10 years - according to the use.
Add a decorative dimension to your interior architecture. using Die -Cast aluminium housing with the most efficient optical solutions and latest LED and driver technology. our range includes: -Downlights -Task Lighting -Surface mounted
Indoor range
creating pleasant spaces that are well lit in a soft and gentle way with uniform surface of light.
H-Bay is a Lighting luminaire designed to produce optimum illumination while providing specific light patterns for specific applications.
Step Light: recessed mounted step light . provide beauty durability and performance , with no visible fasteners to provide seamless integration with architectural styles. Ground Recessed Luminaire: range of inground up lights with different shapes.
Flood light luminaire in an elegant design is making the installation flexible and convenient, it does not only provide bright and lasting lighting but also reduce maintenance. material: made of die cast Aluminum treated and painted with electrostatic powder coating Lens: made of safety and tempered glass Suspension: surface mounted
E-sign is a series to comply building fire codes an insurance standards. it uses less than 2 watts of power with back up battery for 3 hours.
Lighting poles range are designed to give spread light distribution which makes this luminaire suitable for gardens, path ways and homes.
