Size: - Length*Width: 150*150 cm. - Thickness: 12mm Advantage of this Tille: - Excellent slip resistance, water resistance, - Resistance to heavy impact loads, sound absorbent. Indoor flooring: - Does not react to weather conditions. - It has no negative effect on children if directly touched according to our customer feedbacks. - Endurance is more than 2 tons per square meter. Color: Black. Applications: - It is used in sport halls and locations that need Shock absorbers and safety flooring. - It is used in kidsâ?? areas and schools. Material: SBR Rubber mixed with PU Binder Life span: 5:10 years - according to the use
Specification: Water resistant, UV resistant and Heat tolerance is 70. - Lightweight and durable. - Fixed color â?? not dissolvable in water - Available in many colors ( Blue â?? grey â?? Red ) Application: - This rubber is used in the upper layer for paving playgrounds and other floorings - Kids Flooring. Storage: Store in dry conditions and keep away from any sources of heat and ignition. Material: SBR Relative density : 02. 0 �± 1.14 gm/cm�³ Size: - (2-1) mm - (4-1) mm
Dimensions: Width: Up to 1500mm Length: Up to 50 m. Thickness: 1.5 - 50 mm. General Description: EPDM rubber (ethylene propylene diene monomer rubber) is an elastomer that is characterized by wide range of applications and good chemical resistance. Features: Chloramine resistant Good heat and compression resistance. Resistant to ketones, hot and cold water, steam, alkalis, polar solvents,ozone, sunlight, alcohols, glycol engine coolant and Skydrol (phosphate ester hydraulic fluid). Resistant for air conditions. Applications: Automotive: Weather stripping and seals. Wire and cable harnesses. Window spacers. Hydraulic brake systems. Door, window and trunk seals Roofing: Roof membrane. Roof coating. RV roof. Industrial: Water system O-rings and hoses. Tubing, grommets, and belts. Electrical insulations and stinger covers.
Description: MARSO CLM COL Gard is designed to protect the edges of columns in structures. Materials: MARSO CLM Col Gard is made of a high impact resistance extruded rubber profile. Standard color is black. Yellow reflective cover strips are available on request. Range of sizes: The gard is available with or without galvanized metal insert clips with various dimensions. Standard lengths: The standard lengths of MARSO CLM Col Gard are 1 meter and 1.2 meters. Other sizes can be provided upon request. Installation: Place clip on the wall at a distance of 100 or 150 mm from the finished floor level and mark the holes positions on the wall. * Drill holes in the wall by using suitable drill bits. * Fasten the clip to the wall using M6/M8 screws and plastic plug. * Slide the rubber gard from the sides. Clean the Corner gard using dry cloth to clear dust. Alternatively they can be fixed to the column surface using the BASF epoxy resin Wing Length CLM65: A=65 , B=65 CLM: with clips AD: without clips adhesive type
Dimensions: - Width*Length: 11cm * 3.2m : 8cm * 3.2m - Thickness: 2cm Description: To prevent low of water past a closed gate, seals are provided either on the gate or on the metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic, deforms readily and regains its original shape on removal of load. Material: - EPDM. - Screwed + held by steel sandwich. Physical Specification: - Hardness Shore A: 60 - 70 - Tensile (kg/cm2) : 100 kg/cm2 - Elongation at break %.: 450% - Color: Black Applications: Water Preventative in rivers Dams
Dimensions: Width*Length: 15cm * 13m : 2.5cm * 13m - Thickness: 1 cm Description: To prevent flow of water past a closed gate, seals are provided either on the gate or on the metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic, deforms readily and regains its original shape on removal of load. Material: - EPDM. - Screwed + held by steel sandwich. Physical Specification: - Hardness Shore A: 60 - 70 - Tensile (kg/cm2) : 100 kg/cm2 - Elongation at break %.: 450% - Color: Black Applications: Water Preventative in rivers Dams
Dimensions: - Width*Length: 20cm * 12m - Thickness: 1 cm Description: - To prevent flow of water past a closed gate, seals are provided either on the gate or on the metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic, deforms readily and regains its original shape on removal of load. Material: - EPDM. - Screwed + held by steel sandwich Physical Specification: - Hardness Shore A: 60 - 70 - Tensile (kg/cm2) : 100 kg/cm2 - Elongation at break %.: 450% - Color: Black Applications: Water Preventative in rivers Dams