Features for the Husqvarna L221FHE Cutting Method:Mulching, bagging, and side discharge are all available cutting methods. Transportation and Storage:Handle is foldable, allowing for easier storage and transportation. Deck Wash:Connect a hose to the port to quickly and easily clean out the cutting deck. Electric Start:Easily start the engine with the push of a button. Technical Specs for the Husqvarna L221FHE Engine Engine Brand Briggs & Stratton Engine 675 Series W-26 EXI Engine Cooling Air Cutting Deck Cutting Methods Collect/Mulch/Rear Ejection Cutting Width 21 in. Cutting Height Steps 4 Point Cutting Height (min-max) 1 - 4 in. Equipment Collector Type Down Vented Soft Bag Collector Volume 2.2 cu. feet Handle Straight Handle Handle Height Adjustment Yes Blade Brake Clutch (BBC) No
Features for the Scag STCII-61V-26CV-EFI Kohler 26 HP Engine: Big Power, air cooled, EFI (electronic fuel injection. Velocity Plus Cutter Decks: The envy of the industry, Velocity Plusâ?¢ decks deliver an amazing quality-of-cut and a wide, even discharge. This deck is equipped with Scagâ??s ultra-tough cast-iron spindles featuring tapered roller bearings and a top-mounted grease fitting with a relief valve to prevent over-greasing. Ogura PTO Clutch Brake: The Ogura GT3.5 PTO Clutch Brake provides excellent starting and stopping power for the cutter deck, 250 ft. lb. of holding strength, and an adjustable air gap for long life. Tiger Eye Advanced Monitoring System: Depending on the mower model and engine selection, the Tiger Eyeâ?¢ Advanced Monitoring System monitors a wide variety of systems in real-time, giving you valuable information in just a glance, right from the operatorâ??s seat. Comfort Suspension Seat: Torsion-spring suspension seat adjusts to each operatorâ??s weight to provide superior comfort. Seat features full padding, forward/rearward adjustment, a high back, adjustable armrests and an adjustable back angle. The 4-point, rubber iso-mounting provides even more shock absorption, maximizing your comfort, hour after hour. GENERAL Total Fuel Capacity 9.5 gallons Drive Tires 24" x 12"-12" (61") Caster Tires 13" x 6.5"-6", flat-free Seat 4-point iso-mounted mid-back mounted on operator-suspension platform DRIVE SYSTEM Drive System Type Dual Pump and Motor Pumps Hydro-Gear 12 cc Motors Parker 14.5 ci Forward Ground Speed 12 mph Reverse Ground Speed 5 mph Parking Brake Foot-operated pedal DECK Cutting Widths 61" Type Velocity Plus&trade Cutting Height 1" to 5" in .25" increments Deck Lift Adjustable foot-operated pedal Construction Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2" of steel. Reinforcement plates at cutter deck spindles. Spindles Cast-iron housing with tapered roller bearings. Blade Engagement Ogura GT3.5 (250 ft lb)
Features for the Husqvarna Z254F Ergonomic control panel The ergonomic control panel places everything conveniently at your fingertips. Removable foot plate The unique tube style chassis features a removable foot pan for easy access to the top of the cutting deck. Anti-slip foot area The footrest area incorporates generous non-slip surfaces for safe and comfortable use. Bumper The integrated front guard/ bumper offers bold styling while protecting the nose of the unit. An optional bright LED headlight kit can easily be added, providing improved visibility in dark conditions. Refinement Rubber bellows offer a refined look and prevent debris and moisture from entering the control system. Comfortable Seat The thick padded seat and soft outer cover offers superior support and comfort, while the open back gives added ventilation. Specifications Capacity Speed forward max: 6.5 mph Speed forward min: 0 mph Cutting deck Cutting width: 54in Cutting deck type: ClearCutâ?¢ - Fabricated Cutting methods: Collect/Mulch/Side discharge Cutting deck material: Steel Deck thickness: 10 gauge Cutting height steps: 6 Blade engagement: Electric clutch Clutch rating: 87 ft.lb Blades: 3 pcs Anti-scalp wheels: 6 Nose roller: No Deck lifting system: Manual, hand operated Powder-coated cutting deck: Yes Spindle/mandrel type: Cast iron Greaseable mandrels: Yes Deck Wash Port: Yes Cutting height, min-max: 1.5-4 in Dimensions Base machine, length: 75 in Base machine, height: 40 in Base machine, width (chute down): 67 in Base machine, width (chute up): 56 in Weight: 595 lbs. Tire size, front Width: 5 in Tire size, front Diameter: 11 in Tire size, front Diameter wheel: 6 in Drive System Transmission type: Hydrostatic Transmission manufacturer: Hydro-Gear Transmission manufacturer: Hydro-Gear Pump displacement: 10 cm�³ Fan-cooled pumps: Yes Engine Motor/engine manufacturer: Kawasaki Engine name: FR Series Power output: 24 hp Cylinder displacement: 726 cm�³ Cylinders: 2 Engine cooling: Air Air filter type: Auto-type Paper Power/fuel type: Gasoline Engine lubrication type: Full pressure with oil filter Oil filter: Yes Fuel tank volume (with reserve): 3.5 gal (US) Fuel tank location: Side (Single) Equipment Seat material: Vinyl Seat spring: Yes Seat back height: High Hour meter type: Digital with pre-programmed service intervals Cup holder: Yes Hinged armrests: Standard ROPS: No Seat type: Comfort high back
Features for the Champion 200989 - Generator Quiet Technology and Extended Run Time 61 dBA is great for RVs, tailgating, or camping with 4500 starting watts and 3500 running watts and up to 14 hours run time on only 2.3 gallons of gasoline. Parallel Ready The optional parallel kit (sold separately) enables this inverter to connect with another 2800-watt or higher Champion inverter to double your output power. Intelligauge with Power Meter Monitor voltage, frequency, and operating hours with ease, plus the EZ Start Dial simplifies startup while Economy Mode monitors power consumption in real time. Clean Power for Sensitive Electronics RV Ready with a 120V 30A RV, plus two 120V 20A household outlets with clean power (less than 3% THD) and two convenient USB ports. SPECIFICATIONS Gasoline Starting Watts : 4500W Gasoline Running Watts: 3500W Gasoline Starting Amps at 120V: 37.5A Gasoline Running Amps at 120V: 29.2A Volts: 120 Frequency: 60Hz Outlets: 120V 30A (TT-30R), Dual 5V 2.1A USB, 120V 20A Duplex (5-20R) GFCI Outlets: No Covered Outlets: Yes Covered Circuit Breakers: Yes Gasoline Run Time at 1/4 Load: 14â??h. Noise Level: 61â??dBA Inverter: Traditional Parallel Capability: Yes DC Operation: Yes Voltmeter: Intelligauge Automatic Voltage Regulation: No Battery: No Start Type: Recoil Engine Brand: Champion Engine Size: 212cc Engine Type: 4-stroke Engine Speed: Variable Fuel Type: Gasoline Fuel Gauge: Yes Gasoline Capacity: 2.3â??gal. Gasoline Tank Material: Steel Engine Oil Type: 10W-30 Engine Oil Capacity: 0.5â??qt. Engine Oil Included: Yes Low Oil Shut-Off: Yes Wheels: Yes Wheel Type: Solid Wheel Diameter: 5â??in. PGMA G300-2018 Compliant: No EPA Certified: Yes CARB Compliant: Yes DIMENSIONS Length: 23.2 in. Width: 17.7 in. Height: 20.1 in. Weight: 95.0 lb.
Features for the Greenworks Optimow33 Fully automatic Robotic Lawn Mower designed for 1/3 Acre Mowing Area - 1/2 to 3/4 Acre Lot Control your optimow�® from anywhere with Green Guide App connectivity (4G Cellular, FREE 2-Year Subscription) Programmable schedule gives you complete control over your lawn's maintenance Fully integrated GPS tracking included, providing a real-time location Installation kit sold separately for DIY Professional installation also available. See your local Greenworks Commercial dealer for details. Specifications Height: 10.3" Length: 24.8" Width: 19.7" Weight: 24.200000 Battery: 24V / 2.0Ah Power Supply: 100-120 V/29 V VC Avg. Charging Time: 70 minutes (use 211022355 battery) or 130 minutes (use T0100273-00 battery) Avg. Cutting Time: 70 minutes (use 211022355 battery) or 150 minutes (use T0100273-00 battery) Cutting Height: 0.8-2.4" Cutting Width: 8.7" Narrowest Possible Passage: 24" Max. Angle for Cutting Area: 35% Max. Angle for Boundary Wire: 15% Max. Length for Boundary Wire: 2600ft Max. Working Capacity: 1/3 acre Recommended Area Capacity: 0-0.3 acre IP Classification: Mower: IPX5 IP Classification: Charging Station: IPX2 IP Classification: Power Supply: IP67
Features for the DR Power WM13026DEN Wide Area Mower FLEX-SPEED Drive System Match your mowing pace to your walking pace by squeezing a pressure-sensitive, ergonomically designed hand lever. Simply pull the lever toward you to increase speed or relax your grip to slow down. Dual Blade Design Twin blades allow for greater blade tip speed than one longer blade and that produces a clean, high-quality cut. The leading blade (on operator's left side) feeds its clippings into the trailing blade, so they get recut resulting in more finely chopped clippings and small windrows when using side discharge. 3-in-1 Mower Bag, mulch, or side discharge. Bagger and mulching plug included with your mower. Bagger holds up to 2 bushels, so you spend more time mowing and less time emptying. Powerful OHV Engine DR OHV engine has 8.8 ft.-lbs. gross torque (@2500rpm as per SAE J1940). Plenty of power to handle the extra mowing width. One-Touch Height Adjustment Choose from 8 different cutting height settings, from 1" to 4". Never Flat Tires Roll along easily with no-maintenance, never flat wheels â?? 8" high in the front, 10" in the rear. Specifications General CARB Certified: Yes Cutting Blade Tip Speed: 19,000 FPM Cutting Height: Adjustable, 1" to 4" Cutting Width: 26" Grass Bagger Capacity: 2.5 bushels Number of Blades: 2 Engine Air Filter: Paper Cooling Methods: Air cooled Displacement: 200 cc Engine Type: OHV Ft Lbs. Torque: 8.8 Lubrication: Splash Make: DR Number Of Cylinders: 1 Oil Capacity: 17oz Oil Type: SAE 30W HD Pre-Cleaner: Foam
Cutting Width (in.) 42 inches Horsepower (HP) 19.5 hp Mower Size Small Number of Cylinders Single Cylinder Power Type Gas Size of Yard 1 - 2 Acres Engine Make Kohler Engine Riding Mower Features Adjustable Cutting Height Assembly Required Yes CA (CARB) Compliant Not CARB Compliant Commercial / Residential Residential Cutting Options Side-Discharge Deck Material 12 Gauge Steel Deck Type Stamped Drive Type Rear-wheel Drive Engine Displacement (cc) 541 Fuel Tank Capacity (gallons) 3 gal Included with Riding Mowers Battery(s),Engine Oil Lawn Mower Type Front Motor Riding Maximum Cutting Height (in.) 4 Maximum Forward Speed (mph) 5.5 Maximum Reverse Speed (mph) 2.5 Minimum Cutting Height (in.) 1.5 Number of Deck Wheels 2 Oil Capacity (oz.) 64 Recommended Oil Type 10W-30 Refurbished No Start Type Electric Terrain Type Flat with Obstacles,Hilly Transmission Type Hydrostatic Certifications and Listings No Certifications or Listings Assembled Depth (in.) 67 in Assembled Height (in.) 43 in Assembled Width (in.) 52 in Front Wheel Size (in.) 15 Mower Deck Width (in.) 42 Rear Wheel Size (in.) 20 Turning Radius (in.) 16
echnical Specs for the Husqvarna 450X - Robotic Lawn Mower* Engine Battery Li-Ion Run Time 260 Minutes on a Typical Full Charge Cutting Deck Cutting Width 9.4" Cutting Capacity 1.25 Acres +/- 20% Blades 3 pivoting razor blades on a cutter disc Cutting Height (min-max) .8"-2.36" Dimensions Length (in.) 28.34" Width (in.) 22.04" Height (in.) 12.2" * These Technical Specs are provided by the manufacturer at the beginning of the model year. Please be aware that the manufacturer may decide to change these specs at any given time without notice.
Machinery part.
box made from bamboo weave material
Massage bed, candle, coffee beans, coconut briquette charcoal.
Accurate, Banax Kaigen, Daiwa, Daiwa Rods, Fin Nor, Kristal Reels, Lindgren Pitman, Miya Epoch, Okuma, And Himano..
Plywood, Veneer, Blackboard.
Particle board products.
Skewers.
Plywood.
Keruing/gurjan veneer 0.3mm hs code 44089010 .
Sengon Plywood..
Plywood.
Plywood.
