- Electric Panel Meters Suppliers and Manufacturers

Top Quality Pure 99.9% Aluminium Ubc Scrap Beverage Can Scraps Aluminum can Scrap (UBC) - Aluminium Used Beverage Cans Scraps This is an aluminium cans scrap which is generated from beverage cans. The cans are free from dirts, dusts, water and oil. This is ongoing supply and we are capable of meeting your qauntity requirements. If you are interested in our product, Please write us with your email and phone number for more information, product pictures and fast reply. USED BEVERAGE CANS ALUMINIUM SCRAP FOR REMELTING.99,5% AVERAGE ALUMINIUM CONTENT. Bundles must be banded with a minimum of 16mm (width) x 0,80mm (thickness) Polyester straps. The integrity of the bundles must be as safe as they can be stacked for storage, and bundle height must not exceed 1.50 meter. UBC scrap Specification 1. Mainly used for melting ingot 2. Discontinuous melting with scrap 3. Easy control and operation 4. Fast melting 5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on 6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc.

Top Quality Pure 99.9% Aluminium Ubc Scrap Beverage Can Scraps Aluminum can Scrap (UBC) - Aluminium Used Beverage Cans Scraps This is an aluminium cans scrap which is generated from beverage cans. The cans are free from dirts, dusts, water and oil. This is ongoing supply and we are capable of meeting your qauntity requirements. If you are interested in our product, Please write us with your email and phone number for more information, product pictures and fast reply. USED BEVERAGE CANS ALUMINIUM SCRAP FOR REMELTING.99,5% AVERAGE ALUMINIUM CONTENT. Bundles must be banded with a minimum of 16mm (width) x 0,80mm (thickness) Polyester straps. The integrity of the bundles must be as safe as they can be stacked for storage, and bundle height must not exceed 1.50 meter. UBC scrap Specification 1. Mainly used for melting ingot 2. Discontinuous melting with scrap 3. Easy control and operation 4. Fast melting 5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on 6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc.

We are manufacturing, distributing and trading a comprehensive range of 99.9% Copper Honey Brass Scrap that conforms to international quality standard norms. We are the right choice for obtaining superior quality brass Scraps. Copper Scraps that we supply are on massive demand owing to their usage in fabrication of utensils, copper wires, alloys for different industries etc. apart others. Highly ductile and superior performance distinguishes them from other variants available in the markets. Quick Details : Place of Origin: Germany/Poland /Spain Brand Name: Brass Model Number: 99.9% Copper honey brass Scrap Type: Brass Honey Copper Content: 99.99% Supply Ability Different types of brass scraps that are used for recycling or for recovering pure brass, include - brass electrical parts, brass sanitary, brass pneumatic parts. TEST RESULT : Copper: 99.9% Carbon: 0.03% Phosphorus: 0.01%max Coblet: 0.01%max Sulphur: 0.01%max Iron: 0.005%max Zinc: 0.003% Scrap Contains -Cables -Scrap Motor Winding wires -Bus Bar Strips, etc Used As A Raw Material In - Copper Wire Drawing Units - Foundries - Copper Utensils Manufacturing Units - Automobile Industries.

Factory price Copper Cathode Plates/Copper Ingot/ Copper Cathode Cu 99.99% Factory price Copper Cathode Plates/Copper Ingot/ Copper Cathode Cu 99.99% Electro copper Cathode Top Grade 99.99% Dimension : 914mm x 914 x 12mm (appr.) (+/-1%) (LME Standard) 1. Weight of each sheet: 125kgs (+/- 1%) 2. Net weight of each pallet: 2mts (+/- 1%) 3. Min. weight in each container: 20mts approx. 4. Gross weight of each container: 22.20mts approx. 5. Copper (Cu) min% 99.99%-99.97% min Packing: Palletized banded by aluminum bands CONTACT TO PLACE AN ORDER 1.Detailes: 1).Weight: 125kg per sheet 2).Purity: 99.99%-99.97% min 3)..High quality, best price 4).COA, SGS certificate 5).Long term supply 2.Usage Electric light industry, machinery manufacturing, Building industry ,defense industry, and other fields Manufacturing industrial . valves and fittings,Instrument sliding bearing. 3.Packing & Delivery 1).Packing:Weight of each sheet: 125kgs (+/- 1%),Net weight of each pallet: 2mts (+/- 1%),Min. weight in each container: 20mts approx,Gross weight of each container: 22.20mts approx. 2).Delivery:Within 7-10 days after received your prepayment

Factory price Copper Cathode Plates/Copper Ingot/ Copper Cathode Cu 99.99% Factory price Copper Cathode Plates/Copper Ingot/ Copper Cathode Cu 99.99% Electro copper Cathode Top Grade 99.99% Dimension : 914mm x 914 x 12mm (appr.) (+/-1%) (LME Standard) 1. Weight of each sheet: 125kgs (+/- 1%) 2. Net weight of each pallet: 2mts (+/- 1%) 3. Min. weight in each container: 20mts approx. 4. Gross weight of each container: 22.20mts approx. 5. Copper (Cu) min% 99.99%-99.97% min Packing: Palletized banded by aluminum bands CONTACT TO PLACE AN ORDER 1.Detailes: 1).Weight: 125kg per sheet 2).Purity: 99.99%-99.97% min 3)..High quality, best price 4).COA, SGS certificate 5).Long term supply 2.Usage Electric light industry, machinery manufacturing, Building industry ,defense industry, and other fields Manufacturing industrial . valves and fittings,Instrument sliding bearing. 3.Packing & Delivery 1).Packing:Weight of each sheet: 125kgs (+/- 1%),Net weight of each pallet: 2mts (+/- 1%),Min. weight in each container: 20mts approx,Gross weight of each container: 22.20mts approx. 2).Delivery:Within 7-10 days after received your prepayment

Aptamil Advanced First Infant Milk, suitable for babies from birth Nutritionally Complete* (*suitable as a sole source of nutrition from birth and as part of a weaning diet from 6 months. As required by the legislation for all infant formula). - No artificial preservatives** - Contains DHA** (Omega-3) (**As required by the legislation for all infant formula) The beginning of your baby's life is a special and beautiful time. Inspired by 50 years of research in early life science, our passionate team of more than 500 scientists and experts have developed Aptamil�® Advanced First Infant Milk, which is suitable for combination feeding or for formula feeding. Supporting you on your baby's journey - Aptamil�® Advanced Follow On Milk is tailored for babies from 6 to 12 months as part of a varied, balanced diet. - Our unique blend of GOS/FOS and 2'FL - With Vitamin D to support the normal function of the immune system Every Little Step Counts - Factory is 100% powered by renewable electricity and sends zero waste to landfill - Fully recyclable pack. Click the scoop back into the lid before recycling. We are devoted to providing you and your baby our very best. We don't produce for any supermarket own-label brands. Nutricia and Aptamil are registered trademarks. Packaged in a protective atmosphere. Contents may settle in transit.

1. Characteristic: It is a white and colloidal micro-particle with its primary micro-particle from 5-40 nm and has obvious properties such as thixotropy, reinforcing, thickening and filling etc. and is insoluble in all kinds of solvents and liquids except hy-drofluoric acid and concentrated bases. 2. Specification: Q/SHG19-2008ItemIndex Product: LM200 Apparent: White solid colloidal micro-particle Specific surface area m2/g: 150�±15 PH value3.6~4.3 Heating loss weight % (m/m) â?¤1.0 Burning loss weight % (m/m) â?¤1.0 Apparent density g/Lâ?¤60 3. Uses: It is used widely in silicone rubber, construction sealant, coating, electron and electric, aerospace, medicine and medical material, resin processing, printing ink, pesticide and other industries. LM-150: used widely in silicone acid rubber, sulfurized silicone rubber in ambient temperature (low water content), silicone neutral rubber. LM-200: used widely in sealing ring, sealing gasket, petroleum pipeline, insulator, tablet powdered preparation, artificial viscera, infusion tube, latex nipple and high quality oil ink. LM-300: used widely in resin thickener, thickness agent for synthetic lubricating ester, resin thixotropic agent for electronic component. LM-380: used widely in reinforcing agent for silicone rubber, medical silicone rubber for transparent artificial organs and artificial heart etc. 4. Packing: packed with multi-layer paper plastic compound bag with net weight of 5 kg or 10 kg, or packed by whole plastic seal for users having special demand on water content. 5. Store and transport: placed in vent and dry storehouse and prevented from humid, water, pressure and throwing during transport.

"CPU scrap board" typically refers to the circuit boards or electronic components that come from discarded or obsolete computer central processing units (CPUs) and related electronic devices. These boards contain various materials, including metals, plastics, and small electronic components. Here are some key points about CPU scrap boards: Composition: CPU scrap boards are composed of a substrate, often made of fiberglass or other materials, on which electronic components are mounted. These components include microprocessors, memory chips, resistors, capacitors, and other integrated circuits. Metals Content: The boards may contain valuable metals, such as gold, silver, copper, and palladium. These metals are often used in the manufacturing of electronic components for their electrical conductivity and corrosion resistance. Recovery of Precious Metals: Recycling CPU scrap boards is a common practice to recover precious metals. Precious metal reclamation is typically done through processes like mechanical separation, chemical leaching, and refining. Environmental Considerations: Recycling CPU scrap boards is important for environmental reasons. It helps reduce electronic waste (e-waste) and minimizes the environmental impact associated with the disposal of electronic components. Economic Value: The recycling of CPU scrap boards can have economic benefits due to the recovery of precious metals. The value of the scrap depends on the market prices of the metals at the time of recycling. Processing Methods: Various methods are used to process CPU scrap boards for recycling, including manual dismantling, mechanical shredding, and chemical processes to extract metals. Regulations: There are regulations and guidelines in many regions regarding the proper disposal and recycling of electronic waste, including CPU scrap boards. It's important to adhere to these regulations to ensure environmentally responsible practices.

Copper Wire Scrap We have been engrossed in manufacturing and supplying top notch range of Copper Wire Scrap. The offered scrap is processed and segregated by our deft professionals with the aid of pioneering techniques. This scrap is used for manufacturing of copper wires that is used in binding of electric motors. Additionally, the provided Copper Wire Scrap can be bought from us in various specification according to need of clients at pocket friendly rates. Product Description Chemical composition (%): Copper scrap Cu: Bi: Sb: As: Fe: Ni: Pb: Sn: S: O: Zn: P 99.95 0.002 0.002 0.002 0.0050. 0020. 0050. 0020. 0050. 0020. 0050. 001 Wire diameter: 2.5-3 mm Weight/spools: 3, 5, 7, 15, 20kg Tensile strength: 1000, 900, 500, 450N/mm2 Standard and purity of hot sale 99.9% purity copper wire scrap Chemical Components Cu+Ag P Bi Sb AS Fe Ni Pb Sn S Zn O 99.95 0.001 0.001 0.002 0.002 0.005 0.002 0.003 0.002 0.005 0.005 0.02 Shapes: strip and foil Mechanical Property 1. High-purity, fine organization 2. Low oxygen levels, without porosity/trachoma/osteoporosis 3. Very good conductivity and thermal conductivity, good plastic, easy to hot and cold pressure processing

R50- R65 - IRSI CODES; The chemical composition is the standard for R-50 R-65 Tee rails original weigh 50 pounds per yard or heavier,6 meters long and over. Material to be suitable for rerolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails, rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from end of the piece of rail. Free from Fluff, Nonferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings any organic waste any other harmful substances. Dirt, dust, rust fluff and other impurities not allowed over 05 %. The rails are to be neatly bundled and secured with iron wire or straps, provided with adequate lifting hooks. Individual bundles not to exceed 5 MTW. Used Rails R50 - R65 Chemical Composition Used Rails; C: 0, 54 - 0,82 Si: 0,18-0,40 Mn: 0, 60-1, 05 S: 0.04 max P: 0,035 max As.: 0, 01 max of Mass share Norms: R-50 GOST7173-75 and R-65 GOST-8165-75 The scrap consists of R-50 (51, 67 kg/m) R-65 (64,72 kg/m) Used Rail ISRI 27-29 ISRI-CODES; (27) Rail, Steel No. 1. Standard section tee rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch, and guard rails, or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail. (28A) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 18 inches long and under. (28B) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 2 feet long and under. (28C) Rail, Steel No. 2 Cropped Rail En ds. Standard sec t ion, original weight 50 pounds per yard and over, 3 feet long and under. (29) Rail, St eel No. 3.Standard section tee, girder, and/or guard rails, to be free from frog and switch rails not cut apart, and contain no manganese, cast, welds, or attachments of any kind except angle bars. Free from concrete, dirty and foreign material of any kind. The rails can be cut to the length the buyer wants