Find Verified Ring Contour Xyq3C B 24 | Amlppmfg Buyers, Importers and Buy Leads

The buyer would like to receive quotations for -

Product Name: Virgin 100% Polyester Ring Spun Yarn Ne 24/1

Specifications:
24/1 and 30/1 raw white and dyed
1 20' fcl


Quantity Required : 1 Twenty-Foot Container

Shipping Terms : CIF

Destination Port : Jordan

Payment Terms : LC /TT

Looking for suppliers from : Worldwide

Contact : -Elias Shaheen

Please provide a quotation to the following requirement from importer -

Product Name: Crude Oil

Specifications :
Quantity: Trial 1,000,000 bbl, Annual 4,000,000 bbl. per month (1,000,000 bbl. x 4 Times)
The Procedure Approved By Pertamina
1. The Buyer will send a typical ICPO to the Seller/the Seller Mandate.
2. The Seller/the Crude Oil Producer issues the SCO/FCO to the Buyer.
3. The Buyer will issue the ICPO approved by PT PERTAMINA to the Seller/the crude oil producer.
4. The Seller sends the SPA (Sales Purchase Agreement) to the Buyer.
5. The Buyer will sign and seal the SPA at the office of the Seller/Crude Oil Producer. The SPA is to be
lodged on each party's banks respectively.
6. The Buyer will issue a BG/SBLC to the Seller's Bank account.
7. The Seller will issue the following PPOPs to the Buyer within three business days from the date of receipt
of the Buyer's BG/SBLC.
(1) Pre-Test Quality Report, Issued By The Refinery/the Crude Oil Producer (2) Confirmation Letter about Crude Oil Origin, Issued By The Refinery/the Crude Oil Producer
(3) Confirmation Letter about Supply, and Quantity Confirmation, issued by the Refinery/the Crude Oil
Producer
(4) Pre-Shipping Instruction/Voyage, Issued By The Refinery/the Crude Oil Producer
Note:The PPOP must be addressed as follows:
Atten: The Seller's Name
Cc: O., Ltd./ Pt Pertamina
8. The Buyer Propose Pertamina International Shipping 's (PIS) Q88 & ETA for approval by the
Refinery/the Crude Oil Producer loading port terminal.
9. After PIS's Q88 Was Approved, The Seller Will Issue The Following Two Documents To The Buyer Within
three business days.
(1) Shipping Instruction/Voyage, Issued By The Refinery/the Crude Oil Producer
(2) Port Entry Permit, Issued By The Refinery/the Crude Oil Producer
10. The Buyer/ PIS issue NOR prior to arrival the laycan window.
11. Upon the PIS's Vessel Arriving At The Refinery/the Crude Oil Producer' Loading Terminal.
12. The Seller Will Complete The Loading Of Crude Oil Onto Pertamina's Vessel In Accordance With The Spa.
13. After loading is complete, the Seller will issue the following Full POP documents within 24 hours.
(1) Certificate of Quality, Issued By The Refinery/the Crude Oil Producer
(2) Certificate of Quantity, Issued By The Refinery/the Crude Oil Producer
(3) Certificate of Origin, Issued By The Refinery/the Crude Oil Producer
(4) Cargo Manifest, Issued By The Refinery/the Crude Oil Producer
(5) Tanker Ullage Report, Issued By The Refinery/the Crude Oil Producer
(6) Packing List, Issued By The Refinery/the Crude Oil Producer
(7) Tanker Time Sheet, Issued By The Refinery/the Crude Oil Producer
(8) Transfer of ownership Statement Letter, issued by the Refinery/the Crude Oil Producer
14. The Buyer Will Issue The B/l By Pis And Will Complete The Remittance To The Seller Via MT103 after
against B/L Clearance.
15. Upon Confirmation Of The Money Received By The Seller, The Buyer Will Be Permitted To Depart From The
Loading Terminal.
16. The PIS's Vessel Sailing To The Discharge Port According To O The Seller's Instructions And The Next
Delivery Shall Commence According To Same Terms And Conditions Of The Contract.

Quantity Required : 1000000 Barrel/Barrels

Shipping Terms : FOB

Destination Port : United States

Payment Terms : MT103, 100% cash transfer after against B/L clearance, SBLC

Looking for suppliers from : Worldwide

Contact : Daniel White

The buyer would like to receive quotations for -

Product Name: Solar Water Heater

Specifications :
2 Panels Of 4 Square Meter 200–240 L 5.4 L 225 Litres
Need Price Jasai New Mumbai
Technical Specification
Absorber Sheet Copper 32 Swg/0.19 Mm Thick Selectively Coated Laser Welded Nickel-chrome Coated (e.t.p. Quality)
Riser Tube Copper 12.5mm 24 Swg (+ 0.5 Mm)
Header Tube Copper 25 Mm 22 Seg (+ 0.5 Mm)
No. of Riser Tube 9 Fins
Bonding Between Riser & Absorber high Temperature Ultrasonic Seam/laser Welding
Absorber Coating selective Coating Absorbity 0.95+ 0.02 Emmissivity = 0.10 +0.02
Front Glazing Toughen Glass 4 Mm Thickness Transparency 95% And Above
Back Insulation 50mm Thick Rock Wool Slab Density Of 48 Kg/m3 With Aluminum Foil
Gasket Epdm Rubber Grommets And Glass Beeding
Collector Box Jindal/jcw Ms Sheet, Extruded Channel Backed By A Sheet Of 22 Swg
Header Inlet & Outlet Jacket Brass Flanges 62 Mm Dia
Collector Stands And Legs m.s. “l” Angle With Enamel Coated
Support Top Glazing Glass Retaining Aluminum Beeding 1.6 Mm
Collector Box Welding tig Welding
Insulation Rock Wool/puf
Fosterers S.s.screws And Bolt Nuts
Collector Sealant silicon Base
Hot Water Storage Tank Stainless Steel 304 Grade (food Grade) Plasma Tig
Welded Tank /cr With Coating /copper Tank
Insulation 150mm Rock Wool (compressed 100mm) 48 Kg/m3 Density (or)puf Insulation
Outer Cladding Powder Coated Optional Ss 302 Stainless Steel
Screws And Fasteners Stainless Steel
Pipes And Fittings For Internal Ss Fittings “b” Class, Is Standard
Pipes And Fittings For External Ss Fittings “b” Class, Is Standard
Temperature Gauge Nil
Electrical Backup as Per The Electrical Power Sanctioned, Each 200 Lpd 2kwh Given. (optional)
Supporting Structural Stand Ms Channels/angles Of Suitable Size With Enamel Coated

Quantity Required : 30 Unit/Units

Shipping Terms : CIF

Destination Port : Mumbai, India

Payment Terms : L/C

Looking for suppliers from : Worldwide

Contact : Mustafa

Buyer is interested to receive quotations for the following RFQ -

Product : Bags

Specifications:
Details :

S. No Items Name Qty/Pcs
1 Mini back pack 25
2 Simple Small backpack 25
3 Cross Body bag with Tassels 25
4 Simple style Crossbody bag 25
5 MINIGO Foldable Backpack 25
6 Flap Crossbody Bag 25
7 Simple high Capacity backpack 25
8 We Bare Bears Lazy Shopping Bag 25
9 Cute Winking eye Silicone Coin Purse 25
10 Small Elephant short wallet 25
11 Zippered Crossbody bag 25
12 Fashinable letter Ribbon backpack 25
13 Fashinable letter Ribbon Shoulder bag 25
14 Winking eye Silicone Coin Purse 25
15 Crossbody bag with Ring 25
16 Simple Triangle Organizer with suction cup 25
17 We Bare Bears Ice bear Shopping Bag 25
18 Cartoon Animal Short wallet 25
19 Camouflage Pattern Coin Purse 25
20 Toiletry bag 25
21 Semicircle Cross body bag 25
22 Crossbody bag with flower strip 25
23 Cute Owl coin Purse 25
24 Coin Purse with Tassels 25
25 Bowknot Horizontal Cellphone bag 25

All items with standard colour variants

Quantity Required : MOQ

Shipping Terms : CIF

Destination Port : India

Payment Terms : LC

Looking for suppliers from : Worldwide

Contact : Mukesh

Buyer is interested to receive quotations for the following RFQ -

Product Name: Virgin 100% polyester ring spun yarn Ne 24/1

Specifications:
24/1 and 30/1 raw white and dyed
1 20' fcl

Quantity Required : 1 Twenty-Foot Container

Shipping Terms : FOB/CIF

Destination Port : Jordan

Payment Terms : TT /LC

Looking for suppliers from : Worldwide

Contact : Elias Shaheen

Buyer is interested to receive quotations for the following RFQ -

Product Name : Virgin 100% Polyester Ring Spun Yarn

Specifications:
Virgin 100% Polyester Ring Spun Yarn Ne 24/1
Quantity Required : 1 container forty foot

Quantity Required : 1 Twenty-Foot Container

Shipping Terms : CIF

Destination Port : Jordan

Payment Terms : LC

Looking for suppliers from : Worldwide

Contact : Elias Shaheen

Please provide a quotation to the following requirement from importer -

Product : Push to Connect Fitting Components for Water

Specifications:
• Socket Material: Carbon Steel
• Socket Part Number: YW-HA-001
• Socket ID: 45
• Plug Material: Carbon Steel
• Plug Part Number: YW-HA-002
• Bite Ring Material: SUS 304
• Bite Ring Number of Teeth: 24
• Bite Ring Part Number: YW-HA-003
• O-Ring Material: EPDM
• O-Ring Part Number: YW-HA-004
Service Requirements:
• Ensure all parts follow standard fine tolerances.
• Ensure there are no sharp edges on any component.
• We are looking forward to receiving your quotations.
Required Qty. 5000 sets per month
All Carbon steel items to be galvanised.

Quantity Required : 5000 Set/Sets

Shipping Terms : CIf

Destination Port : South Korea (Republic Of Korea)

Payment Terms : TT

Looking for suppliers from : Worldwide

Contact : Nikhil Gupta

Buyer is interested to receive quotations for the following RFQ -

Product Thailand Canned Pineapple

Specifications:
Canned pineapple full slice 10 rings in 10oz per can 24 cans per cartoon'
Qty: 5 x 40' ctnr

Quantity Required : 5 Forty-Foot Container

Shipping Terms : CIF

Destination Port : Thailand

Payment Terms : LC

Looking for suppliers from : Worldwide

Contact : Nopparat Sujaritpinij

The buyer would like to receive quotations for -

Product : Mitsubishi Fuso Truck Engine Genuine Parts

Specifications:
Gasket, Overhauling, For Mitsubishi Fuso Truck Engine, Part # Me996147
PART # ME996147
INCLUDES THE FOLLOWING:
1. O-RING. ROCKER COVER
2. O-RING, ENG BREATHER
3. GASKET, CYLINDER HEAD
4. O-RING, CYLINDER HEAD
5. GASKET, ENG OIL PAN
6. GASKET, ENG OIL PAN DRAIN PLUG
7. GASKET. ENG OIL FILLER
8. O-RING, ENG OIL FILLER
9. GASKET, ENG RR PLATE
10. GASKET, FLYWHEEL HOUSING RR COVER
11. O-RING. FLYWHEEL HOUSING
12. O-RING, VALVE GEAR TRAIN
13. O-RING. TIMING GEAR TRAIN
14. O-RING. AIR COMPRESSOR
15. GASKET. CYLINDER BLOCK SIDE COVER
16. GASKET, CYLINDER BLOCK
17. GASKET, FR OIL SEAL CASE
18. GASKET, OIL STRAINER
19. O-RING, OIL FILTER
20. GASKET, ENG OIL COOLER COVER
21. O-RING, ENG OIL COOLER
22. GASKET, ENG OIL LINE
23. O-RING, ENG OIL LINE
24. GASKET, T/C OIL RETURN TUBE
25. GASKET, FUEL FILTER
26. GASKET, INJECTION PUMP FUEL FEED PUMP
27. GASKET, FUEL INJECTION NOZZLE
28. O-RING, WATER PUMP
29. GASKET, COOLING WATER LINE
30. O-RING, C00LING WATER LINE
31. GASKET, INLET MANIFOLD
32. GASKET, AIR INTAKE PIPE
33. GASKET, EXHAUST MANIFOLD
34. GASKET, INLET MANIFOLD COVER
35. GASKET, AIR INTAKE PIPE
36. GASKET, EXHAUST MANIFOLD
37. GASKET, T/C
38. GASKET, INTAKE AIR HEATER
39. O-RING, P/S OIL PUMP
40. Front OIl Seal
41. Rear Oil Seal
1 kit
NOTE: ALL PARTS MUST BE GENIUNE MITSUBISHI
PARTS
2 TUBE, FUEL INJECTOR, FOR MITSUBISHI FUSO TRUCK FV-517 ENGINE
PART # AS FOLLOWS
ME151555 (6.35X2.2X635 NO. 1)
ME151556 (6.35X2.2X635 NO. 2)
ME151557 (6.35X2.2X635 NO. 3)
ME151558 (6.35X2.2X635 NO. 4)
ME151559 (6.35X2.2X635 NO. 5)
ME151560 (6.35X2.2X635 NO. 6)
NOTE: ALL PARTS MUST BE GENIUNE MITSUBISHI
PARTS
1 ST
3 BEARING MAIN, CRANK SHAFT FOR MITSUBISHI FUSO TRUCK ENGINE, PART # ME994204
PART # ME994204 (BEARING SIZE: STD)
COMPLETE SET ( 14 PCS)
NOTE: ALL PARTS MUST BE GENIUNE MITSUBISHI
PARTS
1 ST
4 BEARING BIG END CON. ROD BEARING, FOR MITSUBISHI FUSO TRUCK ENGINE, PART #
ME994419
PART # ME994419 (BEARING SIZE: STD)
(Complete set 12 pcs)
NOTE: ALL PARTS MUST BE GENIUNE MITSUBISHI
PARTS
1 ST
5 PUMP, OIL PUMP ASSEMBLY, FOR MITSUBISHI FUSO TRUCK FV-517 ENGINE PART #
ME359718
PART # ME359718
NOTE: ALL PARTS MUST BE GENIUNE MITSUBISHI
PARTS
1 EA
6 CORE, OIL COOLER ELEMENT, FOR MITSUBISHI FUSO TRUCK FV-517 ENGINE PART #
ME153172
PART # ME153172
NOTE: ALL PARTS MUST BE GENIUNE MITSUBISHI
PARTS
3 EA
7 PUMP, FUEL PUMP ASSEMBLY, FOR MITSUBISHI FUSO TRUCK FV-517 ENGINE PART #
ME152865 (REMARKS ZEXEL)
PART # ME152865
NOTE: ALL PARTS MUST BE GENIUNE MITSUBISHI
PARTS
1 EA
8 KIT, FOR PISTON, OF MITSUBISHI FUSO TRUCK ENGINE.

Quantity : MOQ

Quantity Required : MOQ

Shipping Terms : CIF

Destination Port : Pakistan

Payment Terms : Bank Transfer

Looking for suppliers from : Worldwide

Contact : Malik Saeed

Please quote for the following wholesale product requirement -

Product Name: EN590 10 PPM Diesel

Specifications:
Quantity : 500,000 MT
 Seller issues Partial Proof of Product ( PPOP) Document As Below
A) Product Quality Passport
B) Certificate of Origin
C) Commitment to Supply
D) Statement of Product Availability

Seller issue Unconditional Dip Test Authorization (UDTA) and ATV. Tank Storage Receipt (TSR) to Buyer. Buyer conduct Dip Test at Seller Tank at Buyers cost.

After the successful Dip Test approval, the seller issue

A) Allocation License
B) Title Ownership Transfer Affidavit
C) Tax Registration Certificate

Quantity Required : 500000 Metric Ton/Metric Tons

Shipping Terms : FOB

Destination Port : Rotterdam,

Payment Terms : MT103/TT to the seller in 24 hours, once 100% payment

Looking for suppliers from : Worldwide

Contact : Asbel

Buyer is interested to receive quotations for the following RFQ -

Product Name: Polyester Staple Fiber for pillows

Specifications:
a) PSF 15D x 64mm White Hollow conjugated siliconized
b) PSF 15D x 64mm Hollow conjugated non siliconized
c) PSF 15D x 64mm Hollow Siliconized White
d) PSF 15D x 64mm hollow non siliconized
e) Downfill FT 0.7D x 38mm SD downfill

Quantity Required : 24 Ton/Tons

Shipping Terms : CIF

Destination Port : Manila, Philippines

Payment Terms : LC

Looking for suppliers from : Worldwide

Contact : See

The buyer would like to receive quotations for -

Product: Spiral Wound Gasket

Specifications :-
Spiral Wound Gasket, 2600-EOO
Origin: South Korea
Specifications: Size: 11Ox154x3.2mm, Filler:
Graphite Hoop: SUS 304, Make: Korea Pillar - 20 - pcs

2. Spiral Wound Gasket 2600-HOO
Make: Korea Pillar, Origin: South Korea
Specifications:(140x110x4.5MM) Without Inner and Outer Ring Material: HOOP: S.S 316 Filler: Graphite
20 - pcs

3.Spiral Wound Gasket 2600-HOO
Make: Korea Pillar, Origin: South Korea
Specifications: (178Xl 98. 5X3.2 MM) Without Inner and Outer Ring Material: HOOP: S.S 316 Filler: Graphite - 20 pcs

4.Spiral Wound Gasket, 2600-EOO
Origin: South Korea
Specifications: Size: 1 l0xl 59x3.2mm, Filler: Graphite Hoop: SUS 304, Make: Korea Pillar - 24 units


5.Spiral Wound Gasket. 2600-EOO
Origin: South Korea
Specifications: Size: 59x99x3.2mm, Filler: Graphite Hoop: SUS 304, Make: Korea Pillar - 20 pcs


6. Spiral Wound Gasket, 2600-EOO
Origin: South Korea
Specifications: Size: 225x270x3.2mm. Filler: Graphite Hoop: SUS 304, Make: Korea Pillar - 20 pcs

7. Spiral Wound Gasket. 2603-EEE
Origin: South Korea
Specifications: Size: 150xl 60x210x220X4.5mm, Filler: Graphite, Hoop: SUS 304 with inner and outer ring, Make: Korea Pillar - 24 units
Quantity - as mentioned above
Terms & Conditions: Document required with Quotation:

i. Technical literature

ii. Drawing of required spares/equipment

iii. Certificate of conformance

iv. OEM certificate is compulsory with quotation otherwise all supply will be rejected.

Document required along with delivery of items:

i. Product quality certificate

ii. Factory test report

iii. Product material certificate

iv. Part Number clearly _mentioned on each spares

Quantity Required : MOQ

Shipping Terms : FOB

Destination Port : United Arab Emirates

Payment Terms : TT

Looking for suppliers from : South Korea

Contact : John Admas

Please quote for the following wholesale product requirement -

Product Name: Ring Joint Gaskets

Specification :-
Type :- Bx-155, Bx-164, Bx-165, Bx-157, Bx-154, Bx-152, R-24, R-25, R-45, R-21.
Use :- Industrial
NOTE :- Looking Suppliers mainly from :- India, U.A.E, Saudi Arabia, Qatar, Bahrain, Kuwait, U.S.A, U.K, China.

Quantity Required : 1 Less than Container Load/LCL

Shipping Terms : CFR, EX WORKS, CIF, FOB, DDP

Destination Port : Shuwaikh, Kuwait

Payment Terms : TT Advance

Looking for suppliers from : India, United Arab Emirates, United States, United

Contact : Mr. Abhishek Joseph

Buyer is interested to receive quotations for the following RFQ -

Product Name: Turbine Fuel Jet A-1

Specifications:
Quantity Required : 1.000.000 bbls
Procedure:
1. The Buyer Issue ICPO with his International Passport Number to the Seller.
2. The Seller issues Commercial Invoice (CI) for the available quantity in the Sellers
Storage Tank to the Buyer. The Buyer signs and return the CI to the Seller with their/
or assigned, signed Tank Storage Agreement (TSA) for the Sellers Verification and
Approval
3. The Seller issues the Partial POP documents as below and sends to the Buyer.
A. Fresh SGS (Not Older Than 48 Hours)
B. Injection Report (IR)
C. Authorization To Verify (ATV)
D. Authorization To Sell And Collect (ATSC)
E. Tank Storage Receipt (TSR)
F. Unconditional Dip Test Authorization (UDTA)
4. The Buyer conducts Dip Test and Take over Sellers tanks (IF REQUIRED). Buyer
provides Tank Details to the Seller to commence injection of product into the Buyers
Tank.
5. Within Twenty-Four (24) hours, Buyer issues 100% MT103 TT wire transfer
paymentto the Seller. The Seller transfers the title ownership to the Buyer.
6. The Seller Pays Commissions to Seller Side And Buyer Pays Buyer Side.

Quantity Required : 1000000 Barrel/Barrels

Shipping Terms : FOB

Destination Port : Rotterdam,

Payment Terms : MT 103

Looking for suppliers from : Worldwide

Contact : Phoenixsfs

Please provide a quotation to the following requirement from importer -

Product Name: Turbine Fuel Jet A-1

Quantity Required : 1.000.000 bbls
Procedure:
1. The Buyer Issue ICPO with his International Passport Number to the Seller.
2. The Seller issues Commercial Invoice (CI) for the available quantity in the Sellers
Storage Tank to the Buyer. The Buyer signs and return the CI to the Seller with their/
or assigned, signed Tank Storage Agreement (TSA) for the Sellers Verification and
Approval
3. The Seller issues the Partial POP documents as below and sends to the Buyer.
A. Fresh SGS (Not Older Than 48 Hours)
B. Injection Report (IR)
C. Authorization To Verify (ATV)
D. Authorization To Sell And Collect (ATSC)
E. Tank Storage Receipt (TSR)
F. Unconditional Dip Test Authorization (UDTA)
4. The Buyer conducts Dip Test and Take over Sellers tanks (IF REQUIRED). Buyer
provides Tank Details to the Seller to commence injection of product into the Buyers
Tank.
5. Within Twenty-Four (24) hours, Buyer issues 100% MT103 TT wire transfer
paymentto the Seller. The Seller transfers the title ownership to the Buyer.
6. The Seller Pays Commissions to Seller Side And Buyer Pays Buyer Side.

Quantity Required : 1000000 Barrel/Barrels

Shipping Terms : FOB

Destination Port : Houston,

Payment Terms : MT 103

Looking for suppliers from : Worldwide

Contact : Phoenixsfs

The buyer would like to receive quotations for -

Product Name: Frozen Meat

Specifications :
Type: Chicken Paws
Grade - Grade A
Appearance: Well Dressed And Cleaned, Minus:-18â
During Transportation: -15 At -18
Length/unit: 07cm- 09cm
Weight Per Piece: 35g Plus
Moisture Content Less Than 3%
Broken Bone Less Than: 2%
No Bruise And Blood,no Outer Nail,no Bad Smell
No Feathers,Chemical Burns.no Black Pad
No Black,spot Less Than:1%
Shelf Life : 24 Months From Production
Quantity : 50-200FCL*40 FT Containers X 12 month, Trial Ship Is 20 FCL*40 FT Containers

Quantity Required : 20 Forty-Foot Container

Shipping Terms : CIF

Destination Port : Yantian Port Of Shenzhen, China

Payment Terms : Bank Transfer - xx% will be paid on site by visiting, against slaughter plant, warehouse, profits invoice, b) xx% down payment will be paid on site by visiting against CIF documents and SGS inspection report! c) xx % balance paid after CIQ inspection, at

Looking for suppliers from : Worldwide

Contact : Fred

Please quote for the following wholesale product requirement -

Product Name : Gas Turbine Spare Parts

Specifications:
1 Solenoid valves NG10 Complete with Base Plate TCT432902R0009B M BX36AA026-29 EA 1
2 Flame Scanner Complete, Short HTCT104783R0013 MBM31CR001 EA 1
3 Safety Relay Unit, complete HTCT013311 R0001 MBX69AA010 EA 2
4 PILOT VALVE HTCT313633 R0001 MBN_Fuel Distribution System EA 3
5 PILOT VALVE HTCT305851R0001 MBN_Fuel Distribution System EA 3
6 COMPRESSED AIR REGULATOR WILKERSON R26-04-GH0 0-17 Bar 1/2" HTCT417329P0013 MBX36DP005 EA 2
7 Double Thermocouple for Ignition Torch HTCT444758P3030 MBM31CT001,2 EA 2
8 FILTER CARTRIDGE HTCT311665P0002 MBX36,69AT001 EA 8
9 MEASUREMENT LINE HTCT 408646R0002 MB EA 2
10 High Pressure Pipe HTCT005152R0001 MBD10_TURBINE-END BEARING EA 2
11 Flame Scanner Bolts HTMA200312P0008 MBM31CR001 EA 24
12 HEXAGON SOCKET HEAD SCREW M12-TX75 HTCT201936P0009 MBM31AV213 EA 24
13 Foil vent valve steal O-Ring HTCT417838P0046 MBN_Fuel Distribution System EA 6
14 Measuring Line Coupling GMD0951561 P0002 MBD11CP001 EA 4
15 SCREWED PIPE CONNECTION 9ANA370103R0204 MBH33CP010, 11 EA 4
16 HEXAGONAL HEAD SCREW PLUG NB 314215P0302 MBH33CP010,11 EA 4
17 LEAD THROUGH PIECE HTCT305702P0001 MBH33CP010,11 EA 4
18 END PIECE HTCT431805P0001 MBH34CP001,2,3,4 EA 4
19 PLUG HTCT 410919R0003 BLOW OFF VALVES EA 3
20 BRANCH SOCKET HTCT410919R0004 BLOW OFF VALVES EA 3


Quantity Required : 1000 Piece/Pieces

Shipping Terms : CIF

Destination Port : Israel

Payment Terms : LC

Looking for suppliers from : Worldwide

Contact : Ramzi Saba

The buyer would like to receive quotations for -

Product Name: Diesel EN590 10ppm, JET Fuel A1

Specifications :
Quantity: 200,000 MT of EN590 and 2 million barrels of Jet Fuel
Price: USD
Platts
1. Buyer Issues ICPO and CIS Addressed To The Seller For Verification And Approval
2. Seller Issues Cl, along with NCNDA-IMFPA Buyer Signs And Returns Cl, within 24 Hours
3. Seller Issues Authorization To The Buyer For Buyers Vopak Terminal Manager To Communicate
With Sellers Vopak Terminal Manager To Verify The Existence Of The Products. This Is To Allow The
Buyer To Verify Fuel Is Real
4. After Confirmation From The Buyers Vopak Terminal Manager, The Buyers Vopak Terminal Manager Submits The Below Documents To The Sellers Vopak Terminal Manager
A. Vopak Terminal Agreement Or Vopak Reference Code
B. Vopak Barcode.
5. Buyer Finalizes The Vopak Terminal Protocols.
6. Seller Issues Full POP Documents To The Buyer Vopak Terminal Manager And Injection Begins.
Upon Completing The Injection, Buyer Makes Full Payment Via MT103 TT, And The Seller Transfers
Title To Buyer. The Seller Pays Commission To All Intermediaries Until Contract Is Complete Along
With All Rolls And Extensions

Quantity Required : 200000 Metric Ton/Metric Tons

Shipping Terms : Vopak To Vopak Procedure

Destination Port : Rotterdam, Netherlands

Payment Terms : MT103

Looking for suppliers from : Worldwide

Contact : Ron Franklin

Please quote for the following wholesale product requirement -

Product: Diesel

Specifications:
Type: En590 and D 6
Qty: En590 100.000 mt and d6 200.000.000 mt
Procedure:
1. The Buyer Issue ICPO with his International Passport Number to the Seller.
2. The Seller issues Commercial Invoice (CI) for the available quantity in the Sellers
Storage Tank to the Buyer. The Buyer signs and return the CI to the Seller with their/
or assigned, signed Tank Storage Agreement (TSA) for the Sellers Verification and
Approval
3. The Seller issues the Partial POP documents as below and sends to the Buyer.
A. Fresh SGS (Not Older Than 48 Hours)
B. Injection Report (IR)
C. Authorization To Verify (ATV)
D. Authorization To Sell And Collect (ATSC)
E. Tank Storage Receipt (TSR)
F. Unconditional Dip Test Authorization (UDTA)
4. The Buyer conducts Dip Test and Take over Sellers tanks (IF REQUIRED). Buyer
provides Tank Details to the Seller to commence injection of product into the Buyers
Tank.
5. Within Twenty-Four (24) hours, Buyer issues 100% MT103 TT wire transfer
paymentto the Seller. The Seller transfers the title ownership to the Buyer.
6. The Seller Pays Commissions to Seller Side And Buyer Pays Buyer Side.

Quantity Required : MOQ

Shipping Terms : FOB

Destination Port : Rotterdam,

Payment Terms : MT 103

Looking for suppliers from : Worldwide

Contact : Phoenixsfs

Please provide a quotation to the following requirement from importer -

Product: Diesel

Specifications:
Type: En590 and D 6

Qty: En590 100.000 mt and d6 200.000.000 mt
Procedure:
1. The Buyer Issue ICPO with his International Passport Number to the Seller.
2. The Seller issues Commercial Invoice (CI) for the available quantity in the Sellers
Storage Tank to the Buyer. The Buyer signs and return the CI to the Seller with their/
or assigned, signed Tank Storage Agreement (TSA) for the Sellers Verification and
Approval
3. The Seller issues the Partial POP documents as below and sends to the Buyer.
A. Fresh SGS (Not Older Than 48 Hours)
B. Injection Report (IR)
C. Authorization To Verify (ATV)
D. Authorization To Sell And Collect (ATSC)
E. Tank Storage Receipt (TSR)
F. Unconditional Dip Test Authorization (UDTA)
4. The Buyer conducts Dip Test and Take over Sellers tanks (IF REQUIRED). Buyer
provides Tank Details to the Seller to commence injection of product into the Buyers
Tank.
5. Within Twenty-Four (24) hours, Buyer issues 100% MT103 TT wire transfer
paymentto the Seller. The Seller transfers the title ownership to the Buyer.
6. The Seller Pays Commissions to Seller Side And Buyer Pays Buyer Side.

Quantity Required : MOQ

Shipping Terms : FOB

Destination Port : Houston,

Payment Terms : MT 103

Looking for suppliers from : Worldwide

Contact : Phoenixsfs