Please quote for the following wholesale product requirement -
Product Name: Blockboards
Specifications:
3 layer panel product.
[material and dimensions]
The front and rear outer layers need to be 5mm thick solid cherry(American cherry), and the core is 9-12mm thick plywood(made in low hardness wood like poplar or spruce). So, the total thickness of the panel would be 19 - 22mm. For the width and length, they are 1220*1220mm.
We want both the front and rear cherry layers to be;
[cherry board grade]
- a premium grade with no knots or other imperfections
- straight grains most preferred, and curly grains to be avoided.
- surface to be sanded smooth.
[cherry board size and orientation]
- wide cherry boards to be used to have the minimum glue lines(8 cherry boards at most on each side of the panel, and fewer than 8 would be great).
- continous stave(no cherry boards are joined lengthwise)
- cherry boards are oriented in the same direction between the front and the rear of the panel.
[glue for cherry boards]
- polyurethane glue preferred, D4. If you have a better alternative, please advise. The dried glue needs to be less hard than the surrounding cherry wood.
- Please note that in our use of the panel, it can be in contact with water often, for hours each time.
- Surfaces to be glued need to be fully covered with glue, without missing any part resulting in dry joint, so that water does not penetrate in such a dry joint and split the joint.
- light tight between adjoining boards when glue is not applied yet(You cannot see light come through from the opposite side, meaning all board edges are very straight. Once the boards are glue joined, the glue line is almost invisible.)
Quantity : 20 foot container load for the initial purchase
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Sydney, Australia
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Steve Bae
Please quote for the following wholesale product requirement -
Product Name: Panels
Specifications :
Panels Made With Sugar Cane, To Be The Core Of Writable Board
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Portugal
Payment Terms : Bank Transfer 30:70 After Against BL
Looking for suppliers from : Worldwide
Contact : Marcelo Marques
The buyer would like to receive quotations for -
Product Name: Aluminum Honeycomb Core Sandwich Panels
Specifications:
- Used As A Flame Deflector On The Following Sizes: Thickness:0.025mm Cell size: 3/8" or 9.5mm Sheet Thickness: 2" or 50.8mm Width: 30" X 76.2 mm Lenght: Model 1: 99+3/4" or 253.4 mm Model 2: 104+1/2" or 266mm
Quantity Required: 100 Pcs. Each And Later: More
Quantity Required : 100 Piece/Pieces(sample)
Shipping Terms : CIF, CFR, FOB
Destination Port : USA, Mexico
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Juan Guaderrama
Please provide a quotation to the following requirement from importer -
Product: Pet Coke
Specifications:
Typical Specification
Net Calorific value NCV 7500 Kcal/kg Below 7500 Kcal/kg
Total Moisture Arb 8 pct Above 8%
Quantity : 60000 to 80000 per Month
PBG of 2.5 % of total contract value to be submitted by the seller.
Shipping Terms: Discharge rate 10000MT PWWD SHINC for geared vessels having 4 cranes of SWL 30 MT capacity and 12 CBM using ship gear. Demurrage at Discharge port for berthing delay is at Buyer account. Demurrage rate to be discussed and fixed during vessel fixation.
Quantity Required : 60000 - 80000 Metric Ton/Metric Tons
Shipping Terms : CIF/CFR
Destination Port : Paradip/Karaikal/ Krishnapatnam, India
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Pratap
The buyer would like to receive quotations for -
Product Name: Packaging Box
Specifications :
Need Different Size Boxes With Company Logo
Also Paper Bag And Transparent Bags With Our Logo
These Are Size For Boxes
Box 1: 1500 Pc
Length:7 Inch
Width:8 Inch
Height 4 Inch
Box 2: 30 Inch 500 Pc
Length: 8 Inch
Width: 30 Inch
Height 3o Inch
Box 3: 500 Pc
Length: 1ft 4inch
Width: 10 Inch
Height 30 Inch
Box 4: 1000 Pc
Length: 2ft
Width:17 Inch
Height 16 Inch
Box 5: 1000 Pc
Length: 1 Ft 1 Inch
Width:9 Inch
Height 8 Inch
Box 6: 1000 Pc
Length: 1 Ft 8 Inch
Width: 11 Inch
Height 8.5 Inch
Need Around
Quantity For Each Size, My Ask Is 0.008 Usd Per Box For Smallest One
Quantity Required : 6000 - 10000 Piece/Pieces
Shipping Terms : CIF
Destination Port : Ksa, Saudi Arabia
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Upgmf
The buyer would like to receive quotations for -
Product Name: Simulator Interactive Wall Projection Shooting Wall Game
Specifications:
Touch projection screen: 175 inch to 660 inch
Multi touch: 10 points(TUIO 30 points)
Panel size/set: 3*5.5 meters
Quantity-MOQ
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Spain
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Rafael Arjona Palma
Please quote for the following wholesale product requirement -
Product Name : Plywood ( waterproof sheet )
Specifications:
For construction
8*4 feet
12 mm thickness
Weight : 30 KG
FFT 48000
2. Silver wood
Size 4*3
3.25 inches* 2.25
Quantity : 500 pieces
Size ; 2.25*1.5 Inches
Quantity : 3000
Quantity Required : 1500 Piece/Pieces
Shipping Terms : CIF
Destination Port : India
Payment Terms : Bank transfer
Looking for suppliers from : India
Contact : Srinivas
The buyer would like to receive quotations for -
Product Name: SS Products
Specifications:
Pipes Elbow And Novel.
eam Material Required Qty
1 SWRO feed pump 30 discharge line NRV flapper damage need to change flapper 6 inch pvc kks-00GDF40AP001 NRV flapper PVC 6 inch 2
2 seawater supply pump 20 mechanical seal leak kks-00GAF20AP001 Meachanical Seal 1
3 MMF backwash pump 10 discharge line NRV flapper damage need to change flapper 6 inch pvc kks-00GDD10AP001 NRV flapper PVC 6 inch 2
4 MMF backwash pump 20 leak from mechanical seal kks-00GDD20AP001 Meachanical Seal 1
5 neutralization pit transfer pump 10/20 leak from mechanical seal kks-00GCN10/20AP001 Meachanical Seal 1
6 BWRO2 bigh pressure pump 32 leak from mechanical seal kks-00GDF32AP001 Meachanical Seal 1
8 sodium hypochloride dosing to service water filling.discharge line have leak above the hypo dosing pump,1/2 inch pvc kks-00GCN71AP001 1/2 ich (50mm) cpvc pipe (10m), elbow (2 No) and coupling (3 No)
9 UF feed pump 30/50 discharge line NRV flapper damage need to change flapper 6 inch pvc kks-00GDD30/50AP001 NRV flapper PVC 6 inch 2
10 SWRO common permeate line have leak above the swro feed chemical dosing point 6 inch pvc elbow kks-00GDF60/70/80AA253 6 inch pvc elbow 1
11 BWRO1 concentrate line leak NRV damage need to change NRV,2 inch pvc kks-00GDF22CF002 2 inch NRV pvc 1
12 BWRO2 concentrate to cip line have leak NRV damage need to change NRV,2 inch pvc kks-00GDF32CF002 2 inch NRV pvc 1
13 EDI 2 product line have leak from the vent cap point above the resistivity analyzer.1/2 inch pvc kks-00GHC50AA251 1/2 inch pvc coupling or end cap 1
16 Bwro feed line above the uf feed pump have leak from the coupling (6 inch pvc coupling kks-00GDF01CF001 6 inch PVC coupling 1
17 UF2/3 drain ON/OFF butterfly valvre passing (6 inch) kks-00GDF81/91AA253 6 inch butterfly valve 2
18 UF 1/2/3 feed hand butterfly valve passing (6 inch) kks-00GDD71/81/91AA001 6 inch butterfly valve 3
19 reject pump 91 discharge line manual hand butterfly valve passing (8 inch) kks-00GDF91AA001 8 inch butterfly valve 2
20 SWRO 3 feed ON/OFF butterfly valve passing before cartridge filter (6 inch) kks-00GDF80AA263 6 inch butterfly valve 1
22 SWRO-1 ERD leaking need maintenance.kks-00GDF60AF002 1
23 UF-1 inlet line leaking need fix. 6 inch adaptor pvc kks-00GDD71AA201 6 inch PVC adaptor and backing flange 1
26 SWRO feed pump 30 discharge bypass line has leak need to fix 3/4 inch pvc. Kks-00GDF30AP001 3/4 inch both side threaded (MNPT) nipple and 90 degree elbow both side threaded (FNPT) 2
27 reject pump discharge line has leak adaptor damage need to fix 8 inch adaptor pvc kks-00GDF91AP001. 8 inch Adaptor PVC 1
28 UF/SWRO CIP pump suction line hand valve passing need to cxhange. Kks-00GDF10/20AP001 6 inch hand valve (Bray)
Quantity:MOQ
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Saudi Arabia
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Khabab Nazar
Please quote for the following wholesale product requirement -
Product Name: Scrap
Specifications :
Type: Bare Bright Copper Wire Scrap
[Bright And Shiny]
Quantity Required: Option#1 (based On Lc & Pb5%) Quantity Per Each Transaction : 1 Ton, 3 Tons, 5 Tons, 8 Tons, 10 Tons, 12 Tons, 14 Tons, 16 Tons, 18 Tons, 20 Tons, 22 Tons, 24 Tons, 26, Tons, 28 Tons, 30 Tons..etc..for 5 Years. This Schedule Will Reduce The Risk On The Buyer Regarding Quality And Grade
Option#2 (based On 100% Trust)
Quantity Per Each Transaction : 50 Ton, 100 Tons, 150 Tons, 200 Tons, 250 Tons, 300 Tons, 350 Tons, 400 Tons, 450 Tons, 500 Tons..etc..for 5 Years
This Schedule Allows The Seller To Execute A Bigger Quantity For Each Transaction And Will Guarantee Purity Of The Scrap Copper As Per The Specifications,
Bank Instrument: No Lc No Pb 5% Required (all Transactions Based On Trust Only). Payment: T.T It Means Via Wire Transfer 10 Business Days After Shipment Arrival To Final Destination In Canada
Purchase Priority#1 to ISRI Code BARLEY (Bare Bright scrap WIRE copper = Thick - min 16 gauge)
Purchase Priority#2 to ISRI Code Berry (Grade #1 WIRE Copper = Thick - min 16 gauge)
Purchase Priority#3 to ISRI Code Birch (Grade #2 WIRE Copper = Thin - Less 16th inch in diameter)
MOU: Must Be Approved By Both Parties
Quantity Required : 1 Ton/Tons
Shipping Terms : CIF
Destination Port : Canada
Payment Terms : L/C against PB 5%, then PAYMENT: T.T it means via wire transfer 10 business days after shipment arrival to Final destination
Looking for suppliers from : Worldwide
Contact : -Mohamed Jany
The buyer would like to receive quotations for -
Product Name : Copper Rods And Copper Nails Png
Specifications:
Looking for flowing sizes and quantity
5/8 inch : 4 pieces
1/2 inch Copper rods 4 pieces
Copper rods 5 pieces 3/8 inch
Copper rods 16 x Nuts x 5/8 inch 32 x Copper roves x 5/8 inch 20 x Nuts x 1/2 inch 40 x copper roves x 1/2 inch 30 x Nuts x 3/8 inch 60 x Copper roves x 3/8 inches
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Papua New Guinea
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : John Tawaheyana
The buyer would like to receive quotations for -
Product Name: Doors
Specifications :
Type: Double Or Triple Panel Shake
Size: 80 Inches 8 Ft Height 18 Inches - 36 Inches Wide
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF Or FOB
Destination Port : Taxes, United States
Payment Terms : T/T
Looking for suppliers from : Brazil
Contact : Saqib
Buyer is interested to receive quotations for the following RFQ -
Product Name: Plastic Toggle Anchors
Specifications:
- Toggle Anchor with Bolts, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 1/4"-20 UNC
Quantity Required : 1 - 200 Piece/Pieces(sample)
Shipping Terms : CIF
Destination Port : Vietnam, Viet Nam
Payment Terms : To be discussed with suppliers
Looking for suppliers from : Worldwide
Contact : Hoang Long
Please provide a quotation to the following requirement from the importer -
Product Name: Industrial Door For Cold Room
Specifications:
- Industrial single service door made from 40-50mm PIR panel to the cold rooms.
- 8 (4 Right Hand And 4 Left Hand), Clear Opening 900 X 2100 To Suit 100mm Panel. L/Lock, Closer, And Vision Panel.
Quantity Required : 8 Unit/Units(sample)
Shipping Terms : CIF
Destination Port : Dover, United Kingdom
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Paulina
Please quote for the following wholesale product requirement -
Product Name: Balsam Wood
Specifications :
8 Inches Wide, 30 Inches Long, And 1/16 Inch In Depth For Building Planes
Quantity Required : 100 Sheet/Sheets(sample)
Shipping Terms : CIF, FOB, CFR Or CNF
Destination Port : Baltimore, United States
Payment Terms : To be discussed with suppliers
Looking for suppliers from : Worldwide
Contact : Mary Beth Russo
Please provide a quotation to the following requirement from importer -
Product Name : Surface Water Pumps, Accessories And Spare Parts
Specification:
Variety and Quantity Required :
Submersiable water pump : Q = 100 m3/h , H =180 meter. The Item shall includes the Control Panels and electrical cable 3*70mm length 70m 1 unit
Submersiable water pump : Q = 100 m3/h and H = 207 meter. The Item shall includes the Control Panels and electrical cable 3*70mm length 70m 1 unit
Surface Waste water pump , Q = 150 m3/h and H of 35 meter, the Item shall includes the Control Panels and Electrical cable 3*35mm length 15m,impeller is able to cut the soft and soild particals into small pieces up to 8 cm ,epoxy coating min 300µ, IP as per technical specifications,mechanical seal should be silicum type 2 unit
Surface Waste water pump , Q =100 m3/h and H = 20 meter. The Item shall includes the Control Panels and Electrical cable 3*35mm length 15m, impeller is able to cut the soft and soild particals into small pieces up to 8 cm , epoxy coating min 300µ, IP as per technical specifications,mechanical
seal should be silicum type 2 unit
Gate valve for sewage pump station (Dia 150 mm) 2 unit
Gate valve for sewage pump station (Dia 100 mm) 2 unit
Non return valve for sewage pump station (Dia 150mm) 2 unit
Non return valve for sewage pump station (Dia 100mm) 2 unit
Submersible water pump: 75 hp ,Q 80= m3/h , H =180m. Including Control Panel and electrical cable 3*70 length 180 m. 4 units
Submersible water pump (Falcon or equivelent): 60 hp ,Q =60 m3/h , H =150m. Including Control Panel and electrical cable 3*50length 160 m. 3 units
3 inch PVC riser pipes (PN 35 )to be installed inside the borehols. 150 units
Top and bottom steel adaptors ( 3 inch ) for connection between the pumps and pvc pipes. 1 units
Submersible Wastewater pump: 25 hp , Q =250 m3/h , H =25 m. Including Control Panel and electrical cable 3*24 length 300m 2 units
Submersible Wastewater pump: 7 hp, Q= 80 m3/h , H =15 m. Including Control Panel and electrical cable 3*24 length 300m. 1 units
Mobile/Trailer Waste water pump: 30 Kw, Q =300 m3/h , H =16 m, motor speed 1800 RPM , inflow and outflow dia 6".
Including all required accessories (discharge pipe length 100m). 1 unit
Mobile/Trailer Wastewater pump: 20 Kw, Q =200 m3/h , H = 13 m, motor speed 1800 RPM , inflow and outflow dia 4" .
Including all required accessories(pipe length 100m). . 1 unit
Submersible water pump: 40 hp, Q =70 m3/h , H =140 m.
Including Control Panel and electrical cable 3*24 length 120m 4 units
Submersible water pump: 15 hp ,Q =40m3/h , H =60-80m.Including Control
Panel and electrical cable 3*16 length 240 m 30
Surface water pump: 100 hp, Q =100 m3/h , H =60m Including
Control Panel (two speeds) 10 units
2 1/2 inch uPVC riser pipes (PN 25)to be installed inside the borehols 7500 units
Top and bottom steel adaptors ( 2 1/2 inch ) for connection between the
pumps and pvc pipes 30 units
Shipping Terms : CIF
Destination Port : Libya, Libyan Arab Jamahiriya
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Omar Dergham
Please quote for the following wholesale product requirement -
Product Name: Agricultural Machinery Parts And Agricultural Discs For Plough
Specifications:
Agricultural Disc Made Of Carbon Boron Steel With 48-52 Hrc Or 52-56 Hrc
1. Agricultural Disc Plain 22 Inches Dia 4 Mm Thick With 1-1/4 Inches Square Central Hole.
2. Agricultural Disc Notched 22 Inches Dia 4 Mm Thick With 1-1/4 Inches Square Central Hole.
3. Agricultural Disc Plain 24 Inches Dia 5 M.m Thick With 3-1/2 Inches Central Hexagonal Hole.
4. Agricultural Disc Notched 24 Inches Dia 5 Mm Thick With 3-1/2 Inches Central Hexagonal Hole.
5. Agricultural Disc Plain 26 Inches Dia 5 Mm Thick With 3-1/2 Inches Cnetral Hexagonal Hole.
6. Agricultural Disc Notched 26 Inches Dia 5 Mm Thick With 3-1/2 Inches Central Hexagonal Hole.
7. Agricultural Disc Plain 26 Inches Dia 5 Mm Thick With 4-small Holes & A Central Round Hole.
8. Agricultural Disc Plain 28 Inches Dia 6 Mm Thick With 4-small Holes & A Central Round Hole.
9. Coultier Disc Plain 18 Inches Dia 4 Mm Thick With 4.75 Inches Round Central Hole & 4-bolt Holes 0.5 Inches At 11-1/2 Inches Distance From Centre.
Quantity Required : 2000 Piece/Pieces(sample)
Shipping Terms : CFR
Destination Port : Karachi, Pakistan
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Muhammad Mansoor Nasim
The buyer would like to receive quotations for -
Product Name: Automobile Fittings
Specifications :
Japan, Korea, Chinese gasoline sedan & SUV’s installation kits 5/16 QD
Toyota, Nissan, Lexus, Mitsubishi, BMW, Jeep etc
Up to 5,000cc ,5,000-10,000cc
USA sedan & SUV’s installation kits 3/8 QD
Hummer, Ford,
Up to 5,000cc ,5,000-10,000cc
Teflon tape & Zip tie
Quick Disconnector Installation kits 3/8 & 5/16 kits
Quick Disconnector kits male 5/16 inches Option 1
Quick Disconnector kits male 5/16 inches Option 2
Quick Disconnector kits male 3/8 inches
Quick Disconnector installation kits 5/16 hose side
Hydraulic NPT Thread fittings for diesel engine
Hydraulic NPT Thread fittings for diesel engine
Diameter 20mm NPT Tread
ECO4 and ECO5
3/8 inch diameter
10mm
DAF, SCANIA, VOLVO, Chinese Trucks, Mercedes Actros, Small shovel Cummins engine excavators,
Note:
A car with a CRDi engine and a German made vehicle must be installed with ECO # 4.
Choose ECO # 5 for all type of Mercedes models.
VOLVO 8-9 is fuel delivery line
Hydraulic NPT Thread fittings for diesel engine
Diameter 20mm NPT Thread
ECO4 and ECO5
1/2 inch diameter
12mm
Some CRDi engines and, electric fuel apertures and pumps
Hydraulic NPT Thread fittings for Mercedes Benz
Diameter 20mm NPT Thread
ECO5
3/8 inch diameter
10mm
3/8 inch diameter
10mm
Note:
Choose ECO # 5 for all type of Mercedes models.+M14 connection fittings use for Mercedes Benz cars
KENWORTH Caterpillar C15
KENWORTH Cummins X15
Hydraulic NPT Tread fittings for AUDI, Volks Wagen
Black Reducers 1 inch to 3/4inch NPT
Silver Hydraulic Reducers 3/4inch to 5/8 or 1/2 NPT
Silver hydraulic elbows 3/4 inch to male 5/8 or 1/2inches
One side is NPT, another side is JIC 8, 10, 12, 14mm
/Case by case/
Example CAT793D, CAT785C, CAT777D
All Of Japan Sedan & SUV’s are 5/16QD
All Of USA Ford 250 diesel's are 1/2 QD
All Of USA Sedan & SUV’s are 3/8 QD
All Of Diesel engine use manual fittings
Quantity :Will start in the 100 units then 1000 units or more
Quantity Required : 100 - 1000 Unit/Units
Shipping Terms : CIF
Destination Port : United States
Payment Terms : LC/TT
Looking for suppliers from : Worldwide
Contact : Dean Reardon
Please quote for the following wholesale product requirement -
Product Name: Garbage Bag
Specifications :
Quantity: 20,000 Units For Each Type
Specification For Kitchen : With Drawstring Closure For Easy Tying And Carrying
Biodegradable, With Fragrance
Measurements: 24 Inches Wide X 27 3/8 Inches High With 0.9 Millimeters Or 22.8 Microns Of Bag Thickness
Capacity: 13 Gallons. Thickness: 0.9 Millimeters Or 22.8 Microns.
For Car Adhesive: Measurements: 12.6 X 9.8 X 0.04 Inches
Without Smell, Biodegradable
Capacity: 1.87 Liters. Thickness: 1 Millimeter
With Adhesive To Stick Anywhere You Need As Long As On A Smooth Surface
For PET Waste: Biodegradable, With Aroma
Measurements: 13 X 9 Inches, Thickness: 15 Microns
Capacity: 3 Kilos
Quality: Resistant
For Bedroom, Bathroom, Office: Biodegradable, With Aroma
Measurements: 21 X 25.2 Inches, 8 Gallon Capacity. 4 Gallons, Thickness: 0.8 Millimeters.
Capacity: 1.2 Gallons
Type: Kitchen, Car Adhesive, Pet Waste, Bedroom, Bathroom, Office
Packaging Terms : Customized
Quantity Required : 20000 Unit/Units
Shipping Terms : CIF
Destination Port : United States
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Giorgy Merchã¡N
The buyer would like to receive quotations for -
Product Name: White Cloth Rags
Specifications:
a. Material : thin cotton or synthetic cotton
b. Thin fabrics. Heavily meshed fabrics cannot be used.
c. No loose remnant edges
d. Eash white cloth rag must measure approximately 10 inches x 9 inches and made of 8 - 10 tattered layers sewn together. The sewing must be as shown in the attached diagram.
e. The white cloth rags must be packed in large 20 kg bags. We estimate that a total of 300 rags (estimate) would be required in each bag weighing 20 kg.
Please quote price to manufacture and pack each 20 kg packet of cotton white cloth rags (with each 20 kg bag containing approximately 300 pieces of white cloth rags each measuring 9 inches x 10 inches and made of 8 - 10 tattered layer sewn together).
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Singapore
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Gerard
Please quote for the following wholesale product requirement -
Product Name : Wool Scarf
Specifications:
Type : Wool Scarf For Women
Size : 30*30 inch
Should be Made in Japan Only
Quantity: 1000 -1500 Dozen each
Quantity Required : 1000 - 1500 Dozen/Dozens
Shipping Terms : CIF
Destination Port : Dubai, United Arab Emirates
Payment Terms : TT
Looking for suppliers from : Japan
Contact : Mohinder Singh
