Please quote for the following wholesale product requirement -
Product Name: Diethyltriamine Cas 111-40-0
Quantity Required : 60 Ton/Tons
Shipping Terms : FOB
Destination Port : Mexico
Payment Terms : Bank Transfer
Looking for suppliers from : Mexico
Contact : Miguel Ngel LPez MRquez
Sweetener tagatose cas 87 81 0 d tagatose
Please provide a quotation to the following requirement from importer -
Product Name: ESPO (Eastern Siberia-Pacific Ocean oil)
Specifications:
Quality: Iso 8216:2005 / Max Sulphur 0.5% Term: Dap
Specification Of East Siberian Pacific Ocean Crude Oil (espo)
Property
Units
Result test Method
DENSITY Specific Gravity ... 15 C. Ka/L 0.8508 ASTM D-5002
Specific Gravity at 60/60 °F Ka/L 0.8512 ASTM D-5191
API Gravity 34.0 ASTM D-1250
Kinematic Viscosity at 20°c CST 6.949 ASTM D-445
Total Acid Number M KOH/a Less than 0.050 ASTM D-664
Pour Point oc less than = -36 ASTM D-5853
Water by distillation Mass 0/o 0.35 ASTM D-4006
Sediment by extraction Mass% 0.01 ASTMD-473
Chloride Salt Content Ma/dm3 17 GOST 21534-75 A
Oraanic Chlorine Content Ma/Ka *1 ASTM D-4929 B
Sulphur Content Mass% 0.535 ASTM D-4294
Hydroaen Sulphide PPM Less 1 UOP 163
Mercaptan Sulphur PPM 111 UOP 163
Ash Content Mass 0/o 0.011 ASTMD-482
Nickel PPM 4 IP-470
Sodium PPM 1 IP-470
IRON PPM 19 IP-470
Copper PPM Less 1 AAS
Vanadium PPM 4 IP-470
Calcium PPM 2 IP-470
Paraffin Content Wax Mass% 3.3 UOP-46
RVPE Kpa 40.4 ASTM D-5191
Asphaltenes heptane insoluble' content Mass% 0.20 IP-143
DISTILLATION ASTM 0-5236
Cut Ranae oc Cum% Vol 2.2 ASTM D-5236
LPG % Vol 6.1 ASTM D-5236
C5-65 % Vol 9.8 ASTM D-5236
65 - 100 % Vol 16.7 ASTM D-5236
100 -150 % Vol 25.1 ASTM D-5236
200 -250 % Vol 32.7 ASTM D-5236
250-300 % Vol 42.0 ASTM D-5236
300-350 % Vol 50.9 ASTM D-5236
350-370 % Vol 54.2 ASTM D-5236
370-475 % Vol 70.0 ASTM D-5236
475-515 % Vol 74.6 ASTM D-5236
515- 525 % Vol 76.0 ASTM D-5236
525 - 553 % Vol 79.9 ASTM D-5236
Quantity Required : 2000000 Barrel/Barrels
Shipping Terms : CIF
Destination Port : China
Payment Terms : DLC Non transferrable from bank based in UAE
Looking for suppliers from : Worldwide
Contact : Ganesh Subramaniyan
Buyer is interested to receive quotations for the following RFQ -
Product Name: Green Pet Coke
specifications:
Specification Unit Value
Moisture % 8 max
Volatiles % 9 to 12
Sulfur % 3 max
Ash % 0.5 max
Ni PPM 250 max
V PPM 250 max
Ca PPM 250 max
Fe PPM 300 max
Si PPM 300 max
Cr PPM 10 max
Mg PPM 20 max
Ti PPM 10 max
Na PPM 150 max
Fixed Carbon % 85 min
Hardgrove grindability index (HGI) 75 - 100
HGI/VCM More Than 8
Vibrated Bulk Density
-0.8 + 0.3 mm
-0.5 + 0.3 mm
gm/cc
0.72 min
12 Sieve Analysis
a) -125 + 50 mm
b) -50+ 10 mm
c) -10 + 5 mm
d) -5 + 0.3 mm
e) -0.3 mm
0 -10
40 -65
15-25
5-10
5-10
Co2 reactivity loss at (1000 deg C) % 3 -15
Air Reactivity at (525 Deg C) %/ minute 0.05 0.3
If the moisture content exceeds 8%, the quantity will be discounted by the supplier
Quantity Required : MOQ
Shipping Terms : FOB
Destination Port : Bahrain
Payment Terms : LC/TT
Looking for suppliers from : Worldwide
Contact : Syed Javeed
The buyer would like to receive quotations for -
Product Name: Green Pet Coke
Specifications :
Unit Valu Moisture % 8 max
Volatiles % 9 to 12
Sulfur % 3 max
Ash % 0.5 max
Ni PPM 250 max
V PPM 250 max
Ca PPM 250 max
Fe PPM 300 max
Si PPM 300 max
Cr PPM 10 max
Mg PPM 20 max
Ti PPM 10 max
Na PPM 150 max
Fixed Carbon % 85 min
Hardgrove grindability index (HGI) 75 - 100
HGI/VCM greater than 8
Vibrated Bulk Density
-0.8 + 0.3 mm
-0.5 + 0.3 mm
gm/cc
0.72 min
12 Sieve Analysis
a) -125 + 50 mm
b) -50+ 10 mm
c) -10 + 5 mm
d) -5 + 0.3 mm
e) -0.3 mm
0 -10 %
40 -65%
15-25 %
5-10%
5-10%
Co2 reactivity loss at (1000 deg C) % 3 -15
Air Reactivity at (525 Deg C) %/minute 0.05-0.3
If the moisture content exceeds 8%, the quantity will be discounted by the supplier.
Quantity Required : MOQ
Shipping Terms : FOB
Destination Port : Bahrain
Payment Terms : LC/ TO be discussed later
Looking for suppliers from : Worldwide
Contact : Syed Javeed
Buyer is interested to receive quotations for the following RFQ -
Product Name: Reclamation Sand
Specifications :
Origin: Malaysia or Indonesia
Specifications:
- The Approved Sand shall either be natural marine sand or sand manufactured/processed from land-based natural materials.
- The Approved Sand shall be regular and angular grain shaped with ALL the following properties:
(a) Angle of shearing resistance: at least 32° corresponding to a relative density of 35% and within the following limits:
- BS 8I2, Part 103 Test Sieve Size/Percentage by weight passing through sieve
- 0.06 mm/0 to 10
- 0.2mm/0 to 40
- 0.6mm/10 to 85
- 0.9mm/15 to 95
- 1.18mm/22 to 100
- 2mm/40 to 100
- 3mm/60 to 100
(b) Combined Coral/Shell (Aragonite) and Silt/Clay Content to be not more than 15%.
(c) Pumice content to be not more than 15%.
(d) Shall not contain any debris, peat, unsuitable organic materials or pumice lumps of aggregate sizes.
(e) The limits of concentration of metal impurities in the Sand shall be less than the following below in accordance with EPA3051A standards.
- The limits of concentration of metal impurities in the Sand shall be less than the following.
- Metal Impurities/Upper limit Concentration (ppm)
- Chromium, Cr/50
- Cobalt, Co/35
- Nickel, Ni/35
- Copper, Cu/55
- Zinc, Zn/150
- Arsenic, As/30
- Molybdenum, Mo/88
- Cadmium, Cd/1
- Barium, Ba/550
- Mercury, Hg/0.8
- Lead, Pb/65
Qty: Monthly quantity: 2,000,000 MT
Contract period: 12 months
Target Price: $7
Commissions: To be paid by the seller
Quantity Required : 2000000 Metric Ton/Metric Tons
Shipping Terms : FOB
Destination Port : China
Payment Terms : Guarantee: 100% LC at Sight Payment timing: Origin
Looking for suppliers from : Worldwide
Contact : Yasu
