Please provide a quotation to the following requirement from importer -
Product Name: Spices
Specifications :
Type: Black Pepper, Turmeric, Red Chilly
Powder And Whole
Note: Initial Credit Terms: Payment Within 5 Days After Receiving The Container At The Destination Port
Extended Terms (After 6 Months Of Successful Transactions): Credit Period Will Be Extended To 15 Days Post-delivery
Buyer is interested to receive quotations for the following RFQ -
Product Name: Fabrics
Specifications :
Type: Rayon Fabric
The Cloth Will Be Of One Type Only, In The Following Classes - Class 1 – White 3032
Class 2 – Black 3227
Class 3 – Blue 3341
Class 4 – Green 3429
Class 5 – Yellow 3510
Class 6 – Red 3803
Characteristics (acrylic)
Requirements
Weight, Oz./yd2, (min.)
4.5
Yarns Per Inch (min.)
Warp
28
Filling
29
Breaking Strength - Initial - Lbs (min)
Warp
95
Filling
97
Breaking Strength - After Resistance To Weathering - Lbs (min)
Warp
95
Filling
95
Ph (range)
5.0-8.5
Buyer is interested to receive quotations for the following RFQ -
Product Name: Caster Wheels
Specifications :
With Load Bearing Of At Least 200 Kg. I Need 50 Of Them Swivel Type With Brake And 50 Of Them Fixed Type. 4 Inch And 5 Inch Sizes Are Preferable To 6 Inch Size
Payment Terms:
full irrevocable confirmed l/c at sight
Destination:
Jordan
Looking for suppliers from:
Worldwide
Product Description
The buyer would like to receive quotations for -
Product Name: Ductile Iron Pipe
Specifications:
DUCTILE PIPES 450mm/18” 16 BAR QTY 72 METERS
DUCTILE COLAR SOCKET 450MM/18” 16 BAR QTY 6 EACH
DUCTILE FLANGE ADAPTER 450mm/18” 16 BAR QTY 6 EACH
DI pipes shall be centrifugally cast(C Class), with socket and spigot ends, EPDM rubber gaskets, according to EN545:2010
DI PIPES ACCORDING TO EN 545-2010
The joints of ductile iron (DI) pipes and fittings shall be TYTON type.
Outside protection coating:
Shall be of 400 g/m² metallic zinc Aluminum Alloy (85%+15%) plus epoxy finishing coat according to EN 545, applied also on socket inside, suitable for ground condition I and II and III. The external surface of the pipe spigot end at a minimum length of 250 mm shall have non toxic epoxy paint applied to a minimum dry film thickness of 100 microns. The internalsurface of the socket end shall be painted with a layer of zinc rich epoxy paint 150g/m²(zinc content not less than 85%° plus a layer of non toxic epoxy paint to aminimum dry film thickness of 100 microns.
Inside protection lining:
Cement mortar according to ISO 4179 – 1985.
2.2 Length of Pipes
Standard length for pipes is 6 meters for transport in bundles or 5.5 -5.8 meters for transport in open top containers.
2.3 Testing
The manufacturer shall demonstrate the conformity of his products with the standards by submitting the below performance tests specified in the standards:
• Compressive strength of the cement mortar lining.
• Leak tightness of flexible joints to positive internal pressure.
• Leak tightness of flexible joints to negative internal pressure.
• Leak tightness of flexible push-in joints to positive external pressure.
• Leak tightness of flexible joints to dynamic internal pressure.
• Leak tightness and mechanical resistance of flanged joints.
• Leak tightness and mechanical resistance of screwed and welded flanges.
The test should include:
• Dimensions Examination.
• Wall Thickness.
• External Diameter.
• Internal Diameter.
• Length
• Straightness of the pipes
• Ovality Test of the Pipes.
• Cement Lining Thickness.
• Tensile Test.
• Elongation test
• Hydrostatic pressure test.
• Hardness Test.
• Microstructure Examination supported by pictures
• thickness of external paint coating
• works leak tightness test for pipes and fittings
pipes and coating materials shall be certified for potable water use and shall contain
no ingredients that may migrate into water in amounts that are considered to be toxic or
otherwise, dangerous for health
Quantity Required : 100 Piece/Pieces
Shipping Terms : CIF
Destination Port : Jordan
Payment Terms : full irrevocable confirmed l/c at sight
Buyer is interested to receive quotations for the following RFQ -
Product: Curcumin
Specifications:
Content : 3.5% to 4.5% (average export-grade 4%)
Color : Bright golden-yellow
Form : Dried fingers (whole), polished or unpolished
Length of Fingers 4 to 6 inches (bold and long)
Moisture Content Max 7% to 10%
Total Ash : Max 7%
Ash Insoluble in Acid Max 1.5%
Volatile Oil Content 3% to 4%
Purity 98% and above (machine cleaned and sorted)
Adulteration Nil (as per lab-tested lots)
Taste and Aroma Earthy, mildly bitter, with strong aroma
If your're able to fullfill the needed requirement's, Kindly share the Quotation on given mail id or given number through whatsapp.
Buyer is interested to receive quotations for the following RFQ -
Product name - Clamp-on Gas Ultrasonic 2 Path Flow Meter
Specifications :-
Must provide : Data Sheet , Catalog for inspection.
Operating Conditions for the Gas Supplied to Station T/1
No. Item Value
1. Pipe Thickness 6–12 mm
2. Pipe Size 3–10 Inch
3. Working Pressure 220 psi
4. Maximum Pressure 600 psi
5. Minimum Pressure 180 psi
6. Maximum Flow Rate 4 MSCF
7. Operating Flow Rate 1–2 MSCF
8. Minimum Flow Rate 0.5 MSCF
9. Temperature Range (Min–Max) -5 to 55°C
10. Uncertainty 1% or less
11. Accuracy 1%
Quantity - 1 initially, MOQ
Looking for suppliers from:
United States, United Arab Emirates, Saudi Arabia, Japan, China, Europe except India
Product Description
Please quote for the following wholesale product requirement -
Product: Areca Leaf Tablewares
Specifications:
S.NO Image Description Dimension Depth Order Quantity
1 3 Compartment Plate 10 Inch(Diameter)1 Inch 5000
2 Shallow with Rib 10 Inch(Diameter) 1 Inch 5000
3 4 Compartment Plate 12Inch(Diameter) 1 Inch 5000
4 3.5 inch Round Bowl 3.5inch(Diameter)1 Inch 5000
5 4.5 inch Round Bowl 4.5 inch(Diameter)1 Inch 5000
6 Round Bowl 5 inch(Diameter) 1 Inch 5000
7 Square Bowl 3.5 inch(Diameter) 1 Inch 5000
8 Egg Shape 4cm By 6cm 1 Inch 5000
9 Heart Shaped Deep Bowl 6.5 inches 1 Inch 6000
10 Pyramid Bowl 6.5 inch by 6.5 inch 1 Inch 4000
11 Round Shallow Plates 6 inch 1 Inch 2000
12 Round Plate 7 inch 1 Inch 3000
13 Round Bowl 8 inch 1 Inch 7000
14 Round Shallow 8 inch 1 Inch 5000
15 Oval Tray 10 inches by 14 inches 1 Inch 6000
16 Tray 10 inches by 12 inches 1 Inch 4000
17 Container Bowls and Plates 10 inches 1 Inch 1000
18 Flat Square 10 inches by 10 inches 1 Inch 9000
19 Flat Square 4 inches by 4 inches 1 Inch 5000
20 Flat Square 6 inches by 6 inches 1 Inch 5000
21 Deep Square 7 inches by 7 inches 1 Inch 5000
22 Flat Square 8 inches by 8 inches 1 Inch 5000
23 Flat Rectangular 10 inches by 6 inches 1 Inch 1000
24 Deep Rectangle Plate 9 inches by 6 inches 1 Inch 9000
25 Oval Tray 10 inches by 14 inches 1 Inch 7000
26 Sharp Edge Rectangle 10 inches by 6 inches 1 Inch 9000
27 Oval Shaped Plate 10 inches by 6 inches 1 Inch 4000
28 Areca Container 10 inch 1 Inch 6000
Qty: as above
Quantity Required : MOQ
Shipping Terms : FOB
Payment Terms : 60% advance and 40% on BOL /bank
Looking for suppliers from : United States, Europe, United Arab Emirates, Saudi
Specifications :-
Body Style / Joint: Side Entry, 2-piece bolted body
Operation: Gearbox handle operated
Finish: Grey painted
Size: 40 inch
Pressure Rating: ANSI Class 600
Port Type: Full bore
Connection Type: Flanged
Facing: Raised face (RF)
Media: Crude oil
Design Temperature Range: -29°C to +120°C
Body and Bonnet Material: Carbon steel, ASTM A105N
Ball Material: Stainless steel, SS F316
Stem Material: Stainless steel, SS F316
Seat Material: Reinforced PTFE (RPTFE)
Design Standard: API 6D
Pressure & Temperature Rating Standard: ASME B16.34
End Flange Standard: ASME B16.47 Series A
Testing Standard: API 598
Quantity - 1
