Buyer is interested to receive quotations for the following RFQ -
Product Name: Conformal Coating Material
Specifications:
Conformal coating material in Silicone and PU
· Chemical resistance: The material should be able to withstand exposure to various chemicals.
· Thickness: The material should have a consistent thickness to ensure proper coverage.
· Adhesion: The material should adhere well to the surface of the component being coated.
· Durability: The material should be able to withstand the rigors of the application environment.
· Application: The material should be easy to apply and not cause any damage to the component being coated.
Quantity Required : 10000 Kilogram/Kilograms
Shipping Terms : CIF
Destination Port : India
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Vishwas Sharma
Denim clothing
Allen bradley controllogix 1756 controller
Plc, Dcs, Allen Bradley, Bently Nevada, Abb,1756 L61
PLC, DCS, allen bradley, bently nevada, abb,1756 l61
Plc, dcs, allen bradley, bently nevada, abb,1756 l61
The buyer would like to receive quotations for -
Product Name: Paraffin Wax Paper
Specifications:
Conforming To Is : 3962-1967
Width Of Paper Roll : 112 Cm ( Approx)
Length Of Roll: 50 Mtrs (approx)
Weight Per Roll: 3 Kg (approx.).
Thickness Of The Paper: 50 Gsm (minimum)
Wax Coating Content Percent By Weight: 30 % (minimum).
-5 Nos. To 10 Nos. Of Rolls May Be Supplied Before Effecting Bulk Supply.
- The Rolls Should Have Specified Strength To Retain Continutity While Rolling During Packing
Please Confirm The Below Points Along With The Quote
1. Please Provide Data Sheet Of Quoted Items
2. Compliance Table
3. Please Mention Hsn Code In Your Quote
4. Please Mention Delivery In Your Quote
5. Please Mention Country Of Origin In Your Quote
6. Please Mention Make Of Quoted Items
7. Please Confirm Availability Of Manufacturer Coc At The Time Of Supply
8. Please Mention Warranty Of Quoted Items
9. Weight Of The Quoted Item
10. Please Provide Validity Of The Quote For 120 Days As Our Customer Will Take Time To Finalize The Quote
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : India, India
Payment Terms : to be discussed
Looking for suppliers from : India
Contact : -Spoorti
Please quote for the following wholesale product requirement -
Product Name: GI Coils
Specifications:
GI Coils Conforming to AS/NZS 1397, 1524mm width with various thickness, Coating: Z275 Grade: G250 Chromated, Dry, Regular Spangle.
Quantity Required : 30 Ton/Tons
Shipping Terms : CIF
Destination Port : New Zealand
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Laurence Siva
The buyer would like to receive quotations for -
Product Name: Needle Syringes
Specifications:
- 1 Million Or CC Luner Lock Piston Syringes Are Packaged Separately, And The Safety Needle Is 25 Gauge X 1 Inch Long.
("Goods") Comply With The Following Specifications And Terms And Conditions:
Syringe 1CC or 1ML LL + 25GX 1" safety needle syringe kit (unit) Syringe LUER lock: one (1) milliliter or milliliter Safety pin 25 gauge (G) one inch (1")
Country of Origin: ( No Made In China.)
Certification:
Manufactured in an ISO certified factory
passed FDA 510 (K) certification
CE mark with a declaration of conformity and
SGS test report of the purchased batch (the factory will have to bear the inspection cost)
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Port Of Miami Or Long Beach/Miami International Airport (Mia) Or Los Angeles International Airport. Airport (Lax)., United States
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Zia
The buyer would like to receive quotations for -
Product Name: Domestic Refrigerator 100 L & Commercial Refrigerator 700 L
Specifications :
1. Domestic Refrigerator 100 L:
Free standard installation type single door refrigerator 100 L capacity with defrost system frost free. Shelf type are toughened tempered glass and body material is stainless steel.
Anti-Bacteria coating on the walls and door inside to prevent the growthand spread of bacteria and odors. Fridge equipped with 2 storage shelves and vegetable drawer with cover glass.
Environment-friendly refrigerant gas R600a , low power consumption 220-240 volts 50 HZ equipped with indoor lighting and Schuko electrical plug and conform to EU fire safety standards for an electrical appliance. Flat back and adjustable feet. 1 year warranty.
2. Commercial Refrigerator 700 L:
Free standard installation type double door refrigerator 700 L capacity with inverter compressor type and defrost system frost free. Shelf type are toughened tempered glass and body material is stainless steel. Anti-Bacteria coating on the walls and doorinside to prevent the growth and spread of bacteria and odors. Fridge equipped with 3 glass line storage shelves and vegetable drawer with cover glass. Environment friendly Refrigerant gas R600a, low power consumption 220-240 volts 50 HZ equipped with indoor lighting and Schuko electrical plug and conform to EU fire safety standards for electrical appliance. Flat back and adjustable feet. 1 year warranty.
Quantity: Domestic Refrigerator 100 L - 14 Pieces & Commercial Refrigerator 700 L - 10 Pieces
Quantity Required : 24 Piece/Pieces
Shipping Terms : FOB
Destination Port : Lebanon
Payment Terms : LC/TT
Looking for suppliers from : Worldwide
Contact : Khalil Labban
The buyer would like to receive quotations for -
Product: Skimmed Milk Powder
Specifications:
Protein 32.5% + Otherwise As Per The Following Specification.
Eu-approved Cert, Fda Cert
Product. Suyyaex- 1neq88a119n certificate Of An Myc I
Product spray Dried Powder Made From Skimmed Milk
Category raw Material
Batch No. tnds 25
Pkd/ Expiry nov 2022 /oct 2023
Asai.xnr-alprqe 811es
S N parameter results specification
1 moisture 2.77 % M/m max 5.0. % (m/m)
2 bulk Density 0.53g/cc 0.50-0.65*/cc
3 scorched Particles disc B disc B is: 13500: 1992
4 insolubility Index. 0.2 Ml max. 0.5 is:12759:1989
acidity (as Lactic Acid) % 0.79
5 by Wt Max max 15, %(m/m) is:11766:1986
6 milk Fat 66% max 1.5%( M/m) is:11721:1986
7 total Mtlk Solids 97.23% mtn. 96.0% M/m calculated
8 milk Protein 34.17% M/m min 34.0% M/m is:7219
9 ph 690 6.5-6.7 ph Meter
10 aflatoxin (m 1) 2.8 Mcg/ 1 Oog max. 5.0 Mcg/ 100g aoac: 1980.21
11 ash 5.32 M/m max. 8.2 % (m/m) is:14433
12 lactose Content 63.96 M/m
anh rous Lactose mire 59.30 % (m/m)
13 melamine nd max 1.0 Mg/kg is:15623:2005
Microbiological Parameters
23 enterobacteriaceae absent/g (10 Samples Of 10 G Each) absent/g (10 Samples Of 10 G Each) is:5402
24 coliform absent/g (5 Samples Of 10 G Each) cio Cfu/g (5 Samples Of 10 G Each) 195401
25 salmonella absent/25g absent/25 G is:5887
(30 Samples 0125 each) (30 Samples Of25 each)
26 s absent/g absent/g
(5 Samples Of2.5 G Each) (5 Samples Of25 G Each) is:5887
27 yeast & Mould absent/g (5 Samples Of 10 G Each) 50 Cfu/g (5 Samples Of 10 G Each) 195403
28 total Plate Count 440cfu/g 5000 Cfu/g is:5402
5 Samples Of 1 O G Each) (5 Samples 109 Each)
Qty: Qty 2,300 Mt Every 3 Months
Packaging Terms : 25kg bags, 7 layers with plastic bag double coat.
Quantity Required : 2300 Metric Ton/Metric Tons
Shipping Terms : CIF
Destination Port : Poland
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Meeraj K
Buyer is interested to receive quotations for the following RFQ -
Product Name: Rail Scrap R50 / R65
Specifications:
R50-R65
ISRI CODE 27-29, R-50(51.67KG/M-GOST-7173-75), R-65(64.72KG/M-GOST-8165-75)
Delivery Terms: CIF
Product & Length / Cutting size: Accepted (Buyer preferred size) is 0.7 to 0.8 meter max.
Origin of Used Rails: Seller to be advice
Source of Used Rails: Seller to be advice
Price:
Price: CIF - USD $ 220 to 250 / Metric Ton including expected commission $15 [buyer mandate 50% & Seller mandate 50%]
Loading port: Seller to be advice
Discharge port: Nahwa Seva - Mumabai - INDIA
PACKING:
Packing: Container or Bulk Shipment [Buyer will advise on latter stage]
Notice: please note that INDIAN PORT department will not accept full length of rail scrap, Rails should be cut into lose of buyer size as mentioned above and can shipped in containers or in bulk vessel.
Quantity:
Trial: 5,000 MT
Monthly quantity: 8,000 mt
Contract value: 8,000 mt x 12 months contract
Payment : 100% Letter of Credit Transferable MT-760 Irrevocable, Confirmed and transferrable by any recognized Banks upon presentation of all shipping documents at destination and against final inspection at destination.
The letter of credit will cover only the material's total value in SPA agreement contract.
1) Commercial Invoice
2) Packing List
3) Certificate of origin
4) Bill of lading
5) Insurance
6) Product photos & videos to be share by seller at the time of FCO signing.
Procedure
A) Buyer/Buyer mandates send LOI. Seller mandate issues FCO.
B) End Buyer puts seal and signature on FCO as acceptance. Buyer issues !CPO to Pyramid Valley General Trading LLC
C) Seller sends SPA draft open for amendments. Buyer and seller signs SPA after negotiations.
D) Buyer will open LC which will become operative against 2% PB by seller.
E) As Seller Bank give Confirmation of Receiving of Original LC, Seller Start preparation of Shipment.
F) Upon final assay at Buyer destination port, in under within 6-Working Days BUYER to be release payment to seller account.
G) Upon confirmation of payments.
H) Same process will apply for further shipments in the contract
Specifications:
Minimum Chemical Composition
0.54 — 0.82
SI 0.18 — 0.40
MN 0.60 — 1.05
s 0.04 max
P 0.035 max
Vs 0.01 max of Mass share
Norms
R-50 GOST-7173-75 and
R-65 GOST-8165-75
R50 (51.67 KG/M)
GOST 7173-75
R65 (64.72 KG/M)
GOST 8165-75
1) Components: these scraps consist of R50-R65 of Rails as R50 (51.67Kg/M Gost-7173-75), R65 (64.72Kg/M Gost8165-75) According to Inco-term 2000. The Rails shall conform to ISRI CODE 27-29, R-50(51.67KG/M-GOST-7173-75), R-65(64.72KG/M-GOST-8165-75) and will be Used Rail Steel Scrap Standard section" Rails. Materials will be, free from Mud, Dust, Fluff, Non-Ferrous inclusion, surface rust excessive rust and other impurities. Free from any substance and coatings any organic waste and other harmful substance. Dirt, Dust Rust fluff and other immunity not allowed.
2) Packing: Cut lose in bulk/containers
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Nava Sheva, Mumbai, India
Payment Terms : 100% Letter of Credit Transferable MT-760 Irrevocable, Confirmed
Looking for suppliers from : Worldwide
Contact : Saleem
Please quote for the following wholesale product requirement -
Product Name: DI Fittings
Specifications :
Item # Description QTY Unit
1 All Flange Tee 100 × 100 × 100 mm 16 Bar 200 Each
2 All Flange Tee 150 × 100 × 150 mm 16 Bar 50 Each
3 All Flange Tee 150 × 150 × 150 mm 16 Bar 10 Each
4 All Flange Tee 200 × 200 × 200 mm 16 Bar 10 Each
5 Ductile Double Flange Elbow 100mm 90 Degree 16 Bar 50 Each
6 Ductile Double Flange Elbow 100mm 45 Degree 16 Bar 65 Each
7 Ductile Socket Flange 150mm 16 Bar 15 Each
8 Ductile Socket Flange 200mm 16 Bar 15 Each
9 Universal Coupling Ductile 100mm 16 Bar 200 Each
10 Universal Coupling Ductile 150mm 16 Bar 100 Each
11 Universal Coupling Ductile 200mm 16 Bar 50 Each
12 Flange Adaptor Ductile 100mm 16 Bar 750 Each
13 Flange Adaptor Ductile 150mm 16 Bar 300 Each
14 Flange Adaptor Ductile 200mm 16 Bar 100 Each
15 Ductile Blank Flange 100 mm 16 Bar 200 Each
16 Ductile Blank Flange 150 mm 16 Bar 25 Each
17 Ductile Blank Flange 200 mm 16 Bar 20 Each
18 Ductile Reducer Flange 200 mm × 100mm 16 Bar 25 Each
19 Ductile Reducer Flange 200 mm × 150mm 16 Bar 25 Each
20 Ductile Tapping Saddle Clamp 100 × 25 mm 16 Bar 500 Each
21 Ductile Tapping Saddle Clamp 100 × 32 mm 16 Bar 600 Each
22 Ductile Tapping Saddle Clamp 150 × 25 mm 16 Bar 350 Each
23 Ductile Tapping Saddle Clamp 150 × 32 mm 16 Bar 250 Each
24 Ductile Tapping Saddle Clamp 150 × 63 mm 16 Bar 150 Each
1. General
1.1 Potable Water Certification
All fittings, gaskets and materials shall be certified for potable water use, and all pipes and materials should be certified as safe for transporting potable water by an independent testing laboratory. All material in contact with or likely to come into contact with water for public shall introduced with the requirements of BS 6920 (suitability for non metallic products for use in contact with drinking water) or any equivalent standard as well as the Jordanian standard (JS 286/2008) and the requirements of EN 15664 ( influence of metallic materials on water intended for human consumption ) or any equivalent standard and the World Health Organization standard (WHO), and whenever the regulation is changed it is the supplier responsibility to ensure conformity with any new requirements.
1.2 Toxic Materials
All fittings, coating, sealing and lining material shall be certified for potable water use and shall contain no ingredients that may migrate into water in amounts that are considered to be toxic or otherwise dangerous for health. Pipes and pipeline components, including their protective coatings and joint materials, that will or may come into contact with potable water shall not constitute a toxic hazard, shall not support microbial growth, shall not cause taste or odour, cloudiness or discolouration of the water and shall contain no ingredients that may migrate into water in amounts that are considered to be toxic or otherwise dangerous for health.
Non-toxicity certificate should be provided in English.
1.3 Third Party witness
The supplier/contractor shall furnish an original certificate from third party inspection agency showing all test results and analysis required by the applicable standard according to which the materials have been manufactured. The third party inspection agency shall under this contract, have witnessed the manufacture and testing operation to verify compliance with the technical specifications and the relevant standard. All certification should be from third party, and the certification should be valid and up to date, in English, and it must be shown in the certificate which batch is being tested to make sure that this certificate is for the right batch.
Quantity Required : MOQ
Shipping Terms : CFR
Destination Port : Aqaba, Jordan
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Ramzi Saba
Please provide a quotation to the following requirement from importer -
Product Name: GI Fittings
Specifications :
Item Description Qty Unit
1 GI Coupling 1/2" Weldable 1,500 Ea (10pcs/Bag)
2 GI Coupling 3/4" Weldable 1,500 Ea (10pcs/Bag)
3 Weldable 1" Coupling GI 1,000 Ea (10pcs/Bag)
4 Weldable 2" Coupling GI 500 Ea (5pcs/Bag)
5 GI Union Joint 1/2" 200 Ea (10pcs/Bag)
6 GI Union Joint 3/4" 1,000 Ea (10pcs/Bag)
7 GI Union Joint 1" 1,000 Ea (10pcs/Bag)
8 GI Union Joint 2" 500 Ea (5pcs/Bag)
9 GI Nipple 1/2" 25,000 Ea (10pcs/Bag)
10 GI Nipple 3/4" 33,000 Ea (10pcs/Bag)
11 GI Nipple 1" 5,00 Ea (10pcs/Bag)
12 GI Nipple 2" 1,000 Ea (5pcs/Bag)
13 GI Reducer 3/4" x 1/2" 20,000 Ea (10pcs/Bag)
14 GI Reducer 1" x 1/2" 1,000 Ea (10pcs/Bag)
15 GI Reducer 1" x 3/4" 6,000 Ea (10pcs/Bag)
16 GI Reducer 2" x 3/4" 200 Ea (5pcs/Bag)
17 GI Reducer 2" x 1" 200 Ea (5pcs/Bag)
18 GI Tee 1/2" 200 Ea (10pcs/Bag)
19 GI Tee 3/4" 4,000 Ea (10pcs/Bag)
20 GI Tee 1" 500 Ea (10pcs/Bag)
21 GI Tee 2" 100 Ea (5pcs/Bag)
22 GI Tee Reducer 3/4" x 1/2" x 3/4" 4,000 Ea (10pcs/Bag)
23 GI Tee Reducer 1" x 1/2" x 1" 1,000 Ea (10pcs/Bag)
24 GI Cross 3/4" 500 Ea (10pcs/Bag)
25 GI Cross 1" 500 Ea (10pcs/Bag)
26 GI Elbow 1/2" 1000 Ea (10pcs/Bag)
27 GI Elbow 3/4" 15,000 Ea (10pcs/Bag)
28 GI Elbow 1" 3,500 Ea (10pcs/Bag)
29 GI Elbow 2" 500 Ea (5pcs/Bag)
30 GI Reducer Elbow 1" x 1/2" 100 Ea (10pcs/Bag)
31 GI Reducer Elbow 3/4" x 1/2" 250 Ea (10pcs/Bag)
32 GI plug 1/2" with a hole 4,500 Ea (10pcs/Bag)
33 GI plug 3/4" with a hole 1,000 Ea (10pcs/Bag)
34 GI plug 1" with a hole 1,000 Ea (10pcs/Bag)
35 GI plug 2" with a hole 500 Ea (5pcs/Bag)
Galvanized Iron Fittings specifications
1.1 Ambient Conditions
All Fittings, materials and Equipment shall be in every respect suitable for storage, installation, use and operation in the conditions of temperature, humidity and The PH and water quality appertaining in Jordan.
The atmospheric temperature in Jordan varies between -10°C and 50 °C.
1.2 Potable Water Certification
All Fittings and materials shall be certified for potable water use, and all fittings and materials should be certified as safe for transporting potable water by an independent testing laboratory. All material in contact with or likely to come into contact with water for public shall introduced with the requirements of BS 6920 (suitability for non metallic products for use in contact with drinking water) or any equivalent standard as well as the Jordanian standard (JS 286/2008) and the requirements of EN 15664 ( influence of metallic materials on water intended for human consumption ) or any equivalent standard and the World Health Organization standard (WHO), and whenever the regulation is changed it is the supplier responsibility to ensure conformity with any new requirements..
1.3 Toxic Materials
Fittings and components, including their protective coatings and joint materials, that will or may come into contact with potable water shall not constitute a toxic hazard, shall not support microbial growth, shall not cause taste or odour, cloudiness or discoloration of the water and shall contain no ingredients that may migrate into water in amounts that are considered to be toxic or otherwise dangerous for health Non toxicity certificate should be provided.
1.4 Third Party Witness
The supplier must submit at least 3 different international third party companies where Miyahuna will choose one of them.
The supplier shall furnish an original certificate from a third party inspection agency showing all test resu
Quantity Required : MOQ
Shipping Terms : CFR
Destination Port : Aqaba, Jordan
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Ramzi Saba
