Preformed endotracheal tube, nasal, cuffed
Please provide a quotation to the following requirement from importer - Product : Steel Plate Carbon, Hot Rolled, Alloy Specifications: STRUCTURE ANNEALED (LENGTH= 1000MM+ 10/-0) X WIDTH (180 MM + 5/-0) XTHICK (6MM ± 0.30MM) NO.35 Cr. Mn SiA CHEMICAL COMPOSITION C=0.32-0.39% Si=1.10-1.40% Mn=0.80-1.10% Cr-1.10-1.40% P=Max 0.025% S=Max 0.025% Cu= Max 0.25% Ni = 0.30% MECHANICAL PROPERTIES Tensile strength=600-800(MPa) Elongation = 16% Min Quantity: 30,400 Kg. ITEM # 2: STEEL PLATE CARBON, HOT ROLLED, ALLOY STRUCTURE ANNEALED (LENGTH= 1000MM+ 10/-0) X WIDTH (180 MM + 5/-0) XTHICK (6MM ± 0.30MM) NO.35 Cr. Mn SiA CHEMICAL COMPOSITION C=0.32-0.39% Si=1.10-1.40% Mn=0.80-1.10% Cr-1.10-1.40% P=Max 0.025% S=Max 0.025% Cu= Max 0.25% Ni = 0.30% MECHANICAL PROPERTIES Tensile strength=600-800(MPa) Elongation = 16% Min Quantity: 35,700 Kg. SPECIAL CONDITIONS: To be followed by Shipper/Maker; 1. Same (Single) competitive Unit Rate must be quoted against the same tendered items. 2. Full Qty falling in both inspection authorities must be quoted otherwise offer will be ignored. 3. Sample to be provided by the firms within 15 x days of technical opening except last Supplier, 4. Validity of offer at least 90 days (Extendable if required) would be considered w.e.f commercial opening of tender (s) after acceptance of technical offers 5. Conditional offers are likely to be ignored. 6. Needful supporting technical literature/ Catalogue/ Brochure against each tender it must accompany technical quotation if requisite/relevant technical literature found missing, quotation will be considered rejected. 7. Performance Bond (in shape of CDR/B.G) should be provided against L.O.I for issuance of formal contract. However, 20 The supplier will render a Warranty / Guarantee Certificate for a period of 12 x months from final acceptance of store 21 Protocol of inspection will be followed as per inspection authorities. Further requirements: · Supplier type: manufacturer 35 tons approx Quantity Required : 35 Ton/Tons Shipping Terms : CIF Destination Port : Pakistan, Pakistan Payment Terms : LC Looking for suppliers from : Worldwide Contact : Rashid Akhtar
1. butyl scrap tubes without neck and patches, 2. crumb rubber powder ( tyre buffing powder collecting from tyre retrading factories ) 3. silica sand 0 to 3 mm
The buyer would like to receive quotations for - Product: Mosquito Warping Knitted Fabric Material PES Specifications: Fiber Material: 100% Polyester Filaments Yarn Fineness: Laying Bar 1 to 3: 6.7 tex to 8.33 tex, semi-matte L1: 1+-0/0-1// L2 0-0/1-1/0-0/3-6/2-2/3-3// L3: 2-2/1-1/2-2/0-0-1-1/0-0// Stitch Row Density: 210/10 cm Stitch Column Density: 90/10 cm Area Weight: (58 +6) g/m² The light mesh size of 1 mm x 1 mm (-10 %) must be strictly adhered to. 2.3 Finishing 2.3.1 Dyeing 2.3.1.1 Color of the finished warp knitted fabric: Bronze green, RAL 6031-F9 as a reference 2.3.1.2 Dyeing Process: Yarn dyeing or piece dyeing Width : 172,5 cm +1 cm Quantity Required : 8000 - 16000 meters first trail Quantity Required : 8000 - 16000 Meter/Meters Shipping Terms : CIF Destination Port : Germany, Germany Payment Terms : LC Looking for suppliers from : Worldwide Contact : Tobias Trommer
Butyl scrap tubes without neck and patches, Crumb rubber powder ( tyre buffing powder collecting from tyre retrading factories ), Silica sand 0 to 3 mm, Sasobit, Polyphosphoric acid 115%
The buyer would like to receive quotations for - Product Name : Copper Ore With Cu 12% Specifications: Copper Ore With Cu 12% Or Above, As 0.5% max, S 3% max, F 0.1% max , Cd 0.05% max, Hg 0.01% max, size: 0-20 mm. Quantity Required : 1 Container 20 foot Quantity Required : 1 Twenty-Foot Container Shipping Terms : CIF Destination Port : Hong Kong Payment Terms : LC Looking for suppliers from : Worldwide Contact : Eva Wong
Please quote for the following wholesale product requirement - Product Name: Urea (46-0-0) Specification: of Urea Fertilizer & Quantity Required: 1. Physical Condition 1.1 Description : Free flowing, white 1.2 Form : Prilled or granular 1.3 Particle Size For Prilled : 90 percent of the material shall pass through 2.8 mm IS sieve and not less than 80 percent by weight shall be retained on 1 mm IS sieve. For Granular: Not less than 90 percent of the material shall pass through 4 mm IS seive and be retained on 2 mm IS seive. Not more than 5 percent shall be below 2 mm IS seive. 2. Chemical Composition 2.1 Moisture Percent by weight, Maximum : 1.0 2.2 Total Nitrogen Percent by weight, Minimum : 46.0 2.3 Biuret Percent by weight, Maximum : 1.5 3. Quantity : 30,000±2% MT 4. Packing : Bagged 50 Kg net. 2. Specification of Bags: The fertilizer should be packed 50 kg. Net in white polypropylene woven bags with polyethylene inner bags. The weight of outer polypropylene bag and inner polyethylene bag should not be less than 230 gram. Size of the bag should be about 40"x22" and fiber construction outer bag should be not less than 10×10 per square inch. The bags should be stitched with strong synthetic thread, Quantity : 30000 metric ton Quantity Required : 30000 Metric Ton/Metric Tons Shipping Terms : CIF Destination Port : Nepal Payment Terms : Bank Transfer Looking for suppliers from : Worldwide Contact : Barsha Khadka
Please provide a quotation to the following requirement from importer - Product: Spices Specifications: Type: 1. Turmeric Powder Specification: Moisture : 10% Place Of Origin: India Curcumin 1.5 To 5% Salmonella Absent / 25 Gms Packaging Details: 25 Kg Pp Bag 2. Dry Red Chilli Specification: Moisture :below 12% Place Of Origin: India Length: 9 To 11 (without Stem) Broken Chilli: 0% To 4% Packaging Details: 25 Kg Jute Bag 3. Tumeric Finger Specification: Place Of Origin: India Type Finger / Bulb Curcumin 1.5 To 5% Moisture: 12% Max. Salmonella Absent / 25 Gms Packing Details: 25 Kg Bag 4. Cumin Seeds Specification: Origin: India Quality: Gulf - Cre 104 Purity: 99% Volatile Oil Content: 2.5%-4.5% Moisture: 7% Admixture: 1% Total Ash (m/m): 9.5 % Max Mold ( By Wgt.): 1 % Max Black Pepper Whole Specification: Product Type 100% Natural,gmo Free Origin: India Size: 1 Mm Mesh: 90% Moisture: 13 % Max Admixture: 1% Max Type Solvent Extration Loss On Drying: =5.0% Sulphated Ash: =5.0% Qty: As Above Quantity Required : MOQ Shipping Terms : CIF Destination Port : Oman Payment Terms : LC Looking for suppliers from : Worldwide Contact : Sagar Raghunath
1. butyl scrap tubes without neck and patches, 2. crumb rubber powder ( tyre buffing powder collecting from tyre retrading factories ) 3. silica sand 0 to 3 mm
1. butyl scrap tubes without neck and patches, 2. crumb rubber powder ( tyre buffing powder collecting from tyre retrading factories ) 3. silica sand 0 to 3 mm
Iv cannula all types (with /without wing), 3 way stop cocks (normal & lipid resistant), i.v. infusion set, extension set, endotracheal tubes (plain & cuffed), a/v fistula needles, blood administration set, disposable syringes 2ml, 3ml, 5ml, 10ml with/ without needles (hypodermic), folleys catheters, surgical & examination gloves, surgical blades (carbon steal and stainless steal), face masks (two ply, three ply), caps (surgeon, bouffant/ nurses) gowns/apron, bed sheet/pillow, ambu bags, paediatric oxygen hood, blood bags (single, double, triple, quadruple, transfer)
Iv cannula all types (with /without wing), 3 way stop cocks (normal & lipid resistant), i.v. infusion set, extension set, endotracheal tubes (plain & cuffed), a/v fistula needles, blood administration set, disposable syringes 2ml, 3ml, 5ml, 10ml with/ without needles (hypodermic), folleys catheters, surgical & examination gloves, surgical blades (carbon steal and stainless steal), face masks (two ply, three ply), caps (surgeon, bouffant/ nurses) gowns/apron, bed sheet/pillow, ambu bags, paediatric oxygen hood, blood bags (single, double, triple, quadruple, transfer)
