Surface stress meter
The buyer would like to receive quotations for -
Product Name: Galvanized Tube Clamps, Key Clamps For Handrails
Specifications:
Material: Malleable cast iron
Standard: a 1562
Tensile strength: = 350
Proof stress: = 210
Elongation: =10
Pipe fittings
Connection method: Jackscrew
Surface: Black galvanized
Warranty: 3 years
Quantity Required : 500 Piece/Pieces
Quantity Required : 500 Piece/Pieces
Shipping Terms : FOB/ CIF
Destination Port : Thailand
Payment Terms : To be discussed
Looking for suppliers from : China
Contact : Phasit Kiatjanon
Buyer is interested to receive quotations for the following RFQ -
Product Name : Modular Mount Portable Stage Platform
Specifications:
Need A Stage With A Surface Area Of 80 M2 Plus The Structure For Covering The Stage With Pylons
should be a modular stage with CE certification and with the possibility of mounting on uneven and non-flat surfaces
Quantity Required : 80 Square Meter/Square Meters
Shipping Terms : CIF
Destination Port : Italy
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Carmelo Missuto
Please provide a quotation to the following requirement from importer -
Product Name: Asphalt
Specifications:
Asphalt works for roads and plazas: supplying, spreading and laying a gravel layer of
crushed stone aggregate for the base layer, with a thickness of not less than 30 cm,
working in two stages, including leveling and preparing the surface of the roads or
plazas specified on the plans according to the tendencies shown in the plans,
including the pressure of the surface of the road or plazas.” Completely using the
appropriate mash to reach the maximum dry density of the soil (95%), compacting a
layer 20 cm thick below the ground level after leveling the full width to receive the
base layer, and compacting the base layer to reach the degree of compaction and
density required by the specifications, and it is charged to the item to carry out all
the required tests and compaction work, With the submission of executive plans
showing the levels, directions, and detailed sectors according to the rules, technical
qty: 14900 SQM
Quantity Required : 14900 Square Meter/Square Meters
Shipping Terms : CIF
Destination Port : Saudi Arabia
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Amresh Pandit
The buyer would like to receive quotations for -
Product Name: Steel Billets B500B/3SP
Specifications:
Qty : 200,000 MT monthly
Grade: B500B/3SP
Process of manufacture:
process route: EAF/BOF---LRF---CCM.
Input raw material: Hot DRI/HBI + Scrap + Internal virgin scrap(as and when required).
Killing practice: Silicon killed/Aluminum killed.
Metallurgical requirements:
Color code: As agreed before contract
Range: Min% - Max%
C 0.19 - 0.22 , Mn 0.65 - 0.80 , Si 0.15 0.30 , S 0.20 , P 0.035 , Cr 0.10 , Ni 0.10 , Cu 0.05 , Sn 0.015 , B 0.0008 , As 0.015 , Sb 0.01 , N2ppm 70
CE : 0.48 max (Aim 0.31-0.36)
CE= C+ Mn/6+ (Cr +Mo +V) /5+(Cu +Ni) /15
Permissible variation in analysis for individual chemical elements will be as per ASTM A29.
Internal soundness:
- One macros sample shall be checked for every 3 heats per sequence.
- Billet macrostructure should be appropriate to produce rolled product as per C2S2R2 ASTM E381.
- Free from harmful subsurface defects like blow / pin holes, and cracks which can affect the end product quality.
- Central looseness / piping: 4mm max.
- No visible defect (piping, pin holes, crack) should be on the cross section of both ends.
Surface Quality:
Billet shall be supplied free from harmful surface defects like longitudinal/transverse cracks, pinholes, slag patches, mechanical mark etc., which can affect surface quality of the end products, Mechanical/Scratch marks with a maximum depth of Less Than = 1mm depth are allowed, defect more than 1mm should be removed by smooth grinding and width of grinding and width of grinding and width of grinding and width of grinding should be at least 6 times of depth.
Size and dimensional tolerances:
Section in mm: 150*150 - 160*160
D1-D2 in mm (max) 10
Side Tol in mm +/-4
Length in meter 12
Length Tol in mm +/-50
Bulging 4 mm max
Bend in mm 5mm/m & 60mm in entire length, no end bend allowed
Ends Cut deviation 5mm max.
General :
- Billet ends will be Gas cut which should be straight.
- Burrs if present should not be more than 5 mm of thickness and 25 mm width
- Billet should be from current production and rust if present should be superficial
Certification:
The test certification will contain
- Supply condition
- Process of manufacturing
- Steel grade
- Heat number(cast number) , length, no of pieces and weight
- Chemical composition
- Declaration for free from radioactivity
Identification:
- Heat no./grade/length will be painted on one end of each billet with a specific color code Please let us know if there is any additional information you require from our end to proceed with this inquiry.
NO Parameters Unit Specs
1 T.Fe % 65.00 Min
2 SiO2 %
3 Al2O3 % 6.00 Max
4 CaO % 0.65 Typical
5 MgO % 0.04 Typical
6 P % 0.06 Max
7 S % 0.0040 Max
12 Moisture % 2.50 Max
21 Less Than 5.0 mm % 1.0 Max
22 T.I.(+6.3mm) % 94.0 Min
23 A.I.(-0.5mm) % 3.0 Max
24 CCS Kg/P 280 Min
26 Porosity % 23% Min
28 Mean Size mm 13 mm
Quantity Required : 200000 Metric Ton/Metric Tons
Shipping Terms : CIF
Destination Port : Oman
Payment Terms : L/C
Looking for suppliers from : Indonesia
Contact : Soheil Damaj
Portable gas detection, fixed gas detection, air sampling, dust and aerosol real time monitoring, indoor air quality monitor, surface and dermal sampling, noise sound and vibration monitoring, heat stress monitoring, non ionising radiation measurement, environmental monitoring, soil & groundwater monitoring
Please provide a quotation to the following requirement from importer -
Product Name: Freeze Dryer Aromatic Plants, Fruits Mushroom
Specifications:
freeze-drying dehydrator with a tray surface of about 100 square meters.
Product specifications:
Product: Freeze-drying dehydrator
Tray surface: About 100 square meters
Capacity: around 1000 kg
quantity : as per moq
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Spain, Spain
Payment Terms : LC/TT
Looking for suppliers from : Worldwide
Contact : Javier Alonso Meseguer
Please quote for the following wholesale product requirement -
Product Name : UV A Led Tape
Specifications:
flexible UV A led tape with a wavelength of 365 nm. 8mm width. The UV A light intensity 7 cm from the tape surface should be around 1500 micro watts. 60 led per meter = approx. intensity of UV A 1500 micro watts from the surface of the tape 7cm. 120 led per meter = Intensity of UV A around 2000 micro watts 7cm from the surface of the tape. consumption per 1 m of tape is around 10 to 15 W.
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Czech Republic
Payment Terms : To be discussed with suppliers
Looking for suppliers from : Worldwide
Contact : Nct
Please provide a quotation to the following requirement from importer -
Product Name: FRP Sheets In Rolls
Thickness 1.5 mm
Width 2.8 m
Length per roll 120m
Surface: glossy white
Quantity Required : 20000 Square Meter/Square Meters
Shipping Terms : FOB
Destination Port : Jacksonville Fl, United States
Payment Terms : LC
Looking for suppliers from : India
Contact : Carlos Casali
Buyer is interested to receive quotations for the following RFQ -
Product Name : Pine and Spruce Lumber
Specifications:
Grade: G4
Moisture : Less than 20
Kiln Dried
Surface Finishing: Rough Sawn
Size : 1 inch x 4 inch x 16 ft
Quantity Required : 50 Cubic Meter/Cubic Meters
Shipping Terms : CIF
Destination Port : United Arab Emirates
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Mohammed Majel
The buyer would like to receive quotations for -
Product: Rockwool Sandwich Panel
Specifications:
Panel thickness: 75mm
surface steel sheet
thickness: 0.45 mm
white color for both side
Widthe: 1000mm
Density of rockwool: 70 kg/m
Length: 11.9m/p
Quantity Required : 20000 Square Meter/Square Meters
Shipping Terms : FOB
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Quynh
Buyer is interested to receive quotations for the following RFQ -
Product : Ceramic Stoneware Tiles
Specifications:
Single-colored, Yellow, External,
With A Matte Surface And Very Low Water Absorption Up To 0.5%, In An Amount of approximately - 400 m2.
And about 30 m2 of the same gray tiles
Quantity Required : 400 Square Meter/Square Meters
Shipping Terms : CIF
Destination Port : Poland, Poland
Payment Terms : TT
Looking for suppliers from : Worldwide
Contact : Krzysztof Gawkowski
The buyer would like to receive quotations for -
Product Name: Molybdenum Wire
Specifications:
Surface: Polished/ black
size : 0.18 mm and 3.17 mm
length : 2000 meter
Density: 10.2 g/cm³
Quantity 2400 pcs each
Quantity Required : 2400 Piece/Pieces
Shipping Terms : CIF
Destination Port : India
Payment Terms : LC / TT / Bank Transfer
Looking for suppliers from : Worldwide
Contact : Ravi Sahaj Thakur
Please quote for the following wholesale product requirement -
Product Name: Protective Wire Fence
Specifications:
Wire diameter: 2,5 mm
Opening: 50x50 mm, or nearest equivalent
Height: 1400 mm, or nearest equivalent
Surface protection: Galvanized, 15 microns thickness (approximately 107 gr/m2)
Lacing wire: middle, 2.5mm
Metal posts: included, H=2,25m, galvanized 70 microns Zn thickness, ~ 500 g/m2
Diagonal supporting struts: included, galvanized 70 microns Zn thickness, ~ 500 g/m2
Warranty against corrosion: 10 years
Galvanization: Zn90%/Al10% (or better) or PVC coating as alternative to achieve warranty conditions
Installation: in concrete, not rammed
Quantity Required : 14000 Meter/Meters
Shipping Terms : CIF
Destination Port : Macedonia
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Radoslav Galic
Buyer is interested to receive quotations for the following RFQ -
Product Name: Rail Scrap R50 / R65
Specifications:
R50-R65
ISRI CODE 27-29, R-50(51.67KG/M-GOST-7173-75), R-65(64.72KG/M-GOST-8165-75)
Delivery Terms: CIF
Product & Length / Cutting size: Accepted (Buyer preferred size) is 0.7 to 0.8 meter max.
Origin of Used Rails: Seller to be advice
Source of Used Rails: Seller to be advice
Price:
Price: CIF - USD $ 220 to 250 / Metric Ton including expected commission $15 [buyer mandate 50% & Seller mandate 50%]
Loading port: Seller to be advice
Discharge port: Nahwa Seva - Mumabai - INDIA
PACKING:
Packing: Container or Bulk Shipment [Buyer will advise on latter stage]
Notice: please note that INDIAN PORT department will not accept full length of rail scrap, Rails should be cut into lose of buyer size as mentioned above and can shipped in containers or in bulk vessel.
Quantity:
Trial: 5,000 MT
Monthly quantity: 8,000 mt
Contract value: 8,000 mt x 12 months contract
Payment : 100% Letter of Credit Transferable MT-760 Irrevocable, Confirmed and transferrable by any recognized Banks upon presentation of all shipping documents at destination and against final inspection at destination.
The letter of credit will cover only the material's total value in SPA agreement contract.
1) Commercial Invoice
2) Packing List
3) Certificate of origin
4) Bill of lading
5) Insurance
6) Product photos & videos to be share by seller at the time of FCO signing.
Procedure
A) Buyer/Buyer mandates send LOI. Seller mandate issues FCO.
B) End Buyer puts seal and signature on FCO as acceptance. Buyer issues !CPO to Pyramid Valley General Trading LLC
C) Seller sends SPA draft open for amendments. Buyer and seller signs SPA after negotiations.
D) Buyer will open LC which will become operative against 2% PB by seller.
E) As Seller Bank give Confirmation of Receiving of Original LC, Seller Start preparation of Shipment.
F) Upon final assay at Buyer destination port, in under within 6-Working Days BUYER to be release payment to seller account.
G) Upon confirmation of payments.
H) Same process will apply for further shipments in the contract
Specifications:
Minimum Chemical Composition
0.54 — 0.82
SI 0.18 — 0.40
MN 0.60 — 1.05
s 0.04 max
P 0.035 max
Vs 0.01 max of Mass share
Norms
R-50 GOST-7173-75 and
R-65 GOST-8165-75
R50 (51.67 KG/M)
GOST 7173-75
R65 (64.72 KG/M)
GOST 8165-75
1) Components: these scraps consist of R50-R65 of Rails as R50 (51.67Kg/M Gost-7173-75), R65 (64.72Kg/M Gost8165-75) According to Inco-term 2000. The Rails shall conform to ISRI CODE 27-29, R-50(51.67KG/M-GOST-7173-75), R-65(64.72KG/M-GOST-8165-75) and will be Used Rail Steel Scrap Standard section" Rails. Materials will be, free from Mud, Dust, Fluff, Non-Ferrous inclusion, surface rust excessive rust and other impurities. Free from any substance and coatings any organic waste and other harmful substance. Dirt, Dust Rust fluff and other immunity not allowed.
2) Packing: Cut lose in bulk/containers
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Nava Sheva, Mumbai, India
Payment Terms : 100% Letter of Credit Transferable MT-760 Irrevocable, Confirmed
Looking for suppliers from : Worldwide
Contact : Saleem