Caprylic/capric triglyceride cas 73398 61 5
Buyer is interested to receive quotations for the following RFQ - Product: Full Cream Milk Powder Specifications: 26% Fat Qty: 5 x FTL containers of butter as a trial Packaging Terms : in 25 kg and 35 kg bags bags Quantity Required : 5 Twenty-Foot Container Shipping Terms : CIF/FOB Destination Port : Germany Payment Terms : Bank Transfer Looking for suppliers from : Worldwide Contact : Mohammad Hesam-Zadeh
The buyer would like to receive quotations for - Product: Talc Powder Specifications: Whiteness: 92% Particle Size Requirements: 5-40 mm: 5,000 MT, packaged in jumbo bags with pallets for ease of handling. 35 Micron: 3,000 MT in small bags with shrink wrapping or stretching for added protection, and an additional 3,000 MT in jumbo bags with pallets. The total quantity required is over 1,000 tonnes Quantity Required : 1000 Tonne/Tonnes Shipping Terms : FOB Destination Port : Karachi, Pakistan Payment Terms : Bank Transfer Looking for suppliers from : Pakistan Contact : Abdul Wahab Akram
Please provide a quotation to the following requirement from importer - Product : Steel Plate Carbon, Hot Rolled, Alloy Specifications: STRUCTURE ANNEALED (LENGTH= 1000MM+ 10/-0) X WIDTH (180 MM + 5/-0) XTHICK (6MM ± 0.30MM) NO.35 Cr. Mn SiA CHEMICAL COMPOSITION C=0.32-0.39% Si=1.10-1.40% Mn=0.80-1.10% Cr-1.10-1.40% P=Max 0.025% S=Max 0.025% Cu= Max 0.25% Ni = 0.30% MECHANICAL PROPERTIES Tensile strength=600-800(MPa) Elongation = 16% Min Quantity: 30,400 Kg. ITEM # 2: STEEL PLATE CARBON, HOT ROLLED, ALLOY STRUCTURE ANNEALED (LENGTH= 1000MM+ 10/-0) X WIDTH (180 MM + 5/-0) XTHICK (6MM ± 0.30MM) NO.35 Cr. Mn SiA CHEMICAL COMPOSITION C=0.32-0.39% Si=1.10-1.40% Mn=0.80-1.10% Cr-1.10-1.40% P=Max 0.025% S=Max 0.025% Cu= Max 0.25% Ni = 0.30% MECHANICAL PROPERTIES Tensile strength=600-800(MPa) Elongation = 16% Min Quantity: 35,700 Kg. SPECIAL CONDITIONS: To be followed by Shipper/Maker; 1. Same (Single) competitive Unit Rate must be quoted against the same tendered items. 2. Full Qty falling in both inspection authorities must be quoted otherwise offer will be ignored. 3. Sample to be provided by the firms within 15 x days of technical opening except last Supplier, 4. Validity of offer at least 90 days (Extendable if required) would be considered w.e.f commercial opening of tender (s) after acceptance of technical offers 5. Conditional offers are likely to be ignored. 6. Needful supporting technical literature/ Catalogue/ Brochure against each tender it must accompany technical quotation if requisite/relevant technical literature found missing, quotation will be considered rejected. 7. Performance Bond (in shape of CDR/B.G) should be provided against L.O.I for issuance of formal contract. However, 20 The supplier will render a Warranty / Guarantee Certificate for a period of 12 x months from final acceptance of store 21 Protocol of inspection will be followed as per inspection authorities. Further requirements: · Supplier type: manufacturer 35 tons approx Quantity Required : 35 Ton/Tons Shipping Terms : CIF Destination Port : Pakistan, Pakistan Payment Terms : LC Looking for suppliers from : Worldwide Contact : Rashid Akhtar
The buyer would like to receive quotations for - Product Name: Fresh Potato Specifications: include: 1. Types of Granola (vegetable potatoes) 2. Healthy potato tubers, free from pests and diseases (no wet and rotten black spots, no red eyes) 3. Potato tubers are clean of soil (washed) and dry conditions 5. Potato tubers without sprouts and red eyes 6. Potato tubers are not green 7. Potato tubers are not deformed, do not have holes, are not exposed to harvesting tools 8. The skin of the potato tubers is brightly colored, without blisters and peeling. 9. Size : - XL: 3 - 5 pcs/kg - Medium: 6 - 12 pcs/kg - Mini: 16 - 35 pcs/kg. Quantity:15 tons Quantity Required : 15 Ton/Tons Shipping Terms : CIF Destination Port : India Payment Terms : To be discussed with suppliers Looking for suppliers from : Worldwide Contact : Arrathod
Please quote for the following wholesale product requirement - Product: Glycerine, food grade, 99.8% Specifications: Content grade 99.8%, high viscosity. Density 1, 258-1,268 g/cm3. Acidity Less Than 0,2 ml Aldhydes Less Than 10 ppm Ephirs min 8 ml Moisture content 0,5% max Chlorides Less Than 10 ppm Ash content Less Than 0,01% Heavy metals contet Less Than 5 ppm Hallogens Less Than 35 ppm Qty: 20 mt Packaging Terms : in 250 kg drums. Quantity Required : 20 Metric Ton/Metric Tons Shipping Terms : CIF Destination Port : Kazakhstan Payment Terms : LC Looking for suppliers from : Malaysia, Singapore, Indonesia, Turkey, Germany, F Contact : Dauren Aben
Buyer is interested to receive quotations for the following RFQ - Product: H C Ferro Chrome Specifications: Ferro Titanium titanium 30% Min carbon 0.2%max form 5 To 50mm Lumps High Carbon Ferro Manganese manganese 60% Min carbon 8% Max form 5 To 50mm Lumps Pure Nickel nickel 99% Min carbon 0.1% Max form 2" X 2", 4" X 4" Cathodes Low Carbon Ferro Manganese manganese 60% Min carbon 0.2 % Max form 5 To 50mm Lumps High Carbon Ferro Chrome chrome 60% Min carbon 8% Max form 5 To 50mm Lumps Pure Tungsten tungsten 99% Min carbon 0.1% Max form 5 To 50mm Lumps Pure Moly moly 98% Min carbon 0.15% Max form 5 To 50mm Lumps Titanium Metal titanium 99% Min carbon 0.15% Min form 5 To 50mm Lumps Ferro Vanadium vanadium 30% Min carbon 2% Max form 5 To 50mm Lumps Ferro Tungsten tungsten 35% Min carbon 0.15% Max form 5 To 50mm Lumps Silicon Manganese silicon 15 To 25% manganese 55 To 75% form 5 To 50mm Lumps Ferro Silicon silicon 60% Min carbon 0.15% Max form 5 To 50mm Lumps Ferro Nickel nickel 40% Min carbon 0.1% Max form 5 To 50mm Lumps Ferro Moly moly 60% Min carbon 0.2% Max form 5 To 50mm Lumps Low Carbon Ferro Chrome chrome 60% Min carbon 0.1 Max form 5 To 50mm Lumps Ferro Silicon Zirconium silicon 35% Min carbon 0.2% Max form 5 To 50mm Lumps Medium Carbon Manganese manganese 60% Min carbon 5% Max form 5 To 50mm Lumps Calcium Silicide calcium 30% Max silicon 40% Min form 5 To 50mm Lumps Aluminium Lm4 Ingots aluminium 85% Min silicon 4% To 6% copper 2% To 4% form ingots Pure Chromium chromium 99% Min carbon 0.03% Max form 5 To 50 Mm Ferro Silicon Magnesium silicon 35% Min magnesium 5% Min carbon 0.2% Max form 5 To 50 Mm Nitrated L/c Ferro Chrome chromium 60% Min nitrogen 7% Min carbon 0.1% Max form Less Than 20mm Lumps Pure Carbon carbon 99.5% Min sulphur 0.05% Max ash 1% Max moisture 0.5% Max nitrogen 0.1% Max form 0.5-5 Mm Tin Ingots tin 98% Min form ingots Zinc Ingots zinc 99.95% Min form ingots Copper Phosphorus Shot cu 84.75% phosphorus 12.25% form pellets ca 0.5% To 1.5% Innoculant ba 2% To 3% al 0.5% To 1.5% si 65% To 80% p 0.035 Max s 0.04 Max fe balance size 2 To 6mm Lead cu 0.02% pb 100.00% form wire/ingots Qty: 'ferrosilicon 75% 8,000 Kgs Silicon 75% Min Carbon 0.15% Max Form 5 To 50mm Lumps H C Ferro Chrome 50000 Kgs Chrome 60% Min Carbon 8% Max Form 5 To 50mm Lumps Ferro Molybdenum 8,000 Kgs Moly 60% Min Carbon 0.2% Max Form 5 To 50mm Lumps Low Carbon Ferro Chromium 20,000 Kgs Chrome 61% Min Carbon 0.1 Max Form 5 To 50mm Lumps High Carbon Ferro Manganese 16,000 Kgs Manganese 60% Min Carbon 0.2 % Max Form 5 To 50mm Lumps Chrome 60% Min' Qty: As Above Quantity Required : 102000 Kilogram/Kilograms Shipping Terms : CIF Destination Port : United Arab Emirates Payment Terms : LC Looking for suppliers from : Worldwide Contact : Shubhangi Gadiyar
Please provide a quotation to the following requirement from importer - Product Name: 99% Triclosan Specifications: CAS 3380-34-5 Quantity Required : 20 Ton/Tons Shipping Terms : CIF Destination Port : Turkey Payment Terms : LC Looking for suppliers from : Worldwide Contact : Ilyas Mellah
Please provide a quotation to the following requirement from importer - Product Name: Used Construction Equipment Machinery Specifications : Type : Hitachi Excavators Ex200-1 Ex270-1 Ex270-5 Ex300-1 Ex330-5 Ex400-1 Ex450-5 Zx280 Zx 350 Wheel Loader Cat 950b ,cat 950e Cat 966f Motor Grader Cat 140g Road Roller Daynapac Ca 251d Ca 262d Ca362 Qty : 1 Unit Initially Each Quantity Required : 1 Unit/Units Shipping Terms : CIF Or FOB Destination Port : Pakistan Payment Terms : T/T Looking for suppliers from : United States, Japan Contact : Mansoor Khan
Please quote for the following wholesale product requirement - Product Name: Running Capacitors Specifications : Size: 35+5,40 +5 45+5 And Quantity: 500 Pieces For Each Quantity Required : 500 Piece/Pieces Shipping Terms : CIF Destination Port : Saudi Arabia Payment Terms : To be discussed with sellers Looking for suppliers from : Worldwide Contact : Ali
Buyer is interested to receive quotations for the following RFQ - Product : Rice Specifications: 1. White Rice Requested (Not Paraboil) They specifically required Steam rice 2. 18/20 kgs or 35 kgs. (35 Kgs pack - WPP Bags prefer) 3. Sohar Oman 4. Spot Deal with 5 containers thereafter 10 FCL for 11/12 months contract. 5. Payment at load port against shipping docs 6. Pls ask for their best CIF price with Payment at load port against shipping docs Quantity Required : 10 Twenty-Foot Container Shipping Terms : CIF Destination Port : Sohar, Oman Payment Terms : To be discussed with suppliers Looking for suppliers from : Worldwide Contact : Kalpana Srivastava
Fluorspar (caf2 grades: 80% 85%, 75% 80%, 70% 75%, 65% 60% and below 60%), silica quartz (lump and fine sio2 98% 99%), silica sand (any mesh size sio2 95% 98%), magnesite (mgo 43% to 50%), manganese (mn 25% to 35%), limestone/ calcium carbonate (90% to 95%), gypsum (caco4 85% to 95%), dolomite, mica scrap, feldspar, barite (sp gravity 4.0/4.1/4.2/4.3 & basf4 87% to 90%)
Buyer is interested to receive quotations for the following RFQ - Product Name: Acacia Wood Chips Specifications : Moisture: 40% Size- Classification 5 Mm (5% Max) 28mm To 35 Mm (10%max), 5mm To 28mm ( 83%min) Dust And Fines 5mm (2% Max) Chip Thickness- 3- 7mm Purpose - Ethanol Production Packaging Terms : Bulk Quantity Required : 10000 Metric Ton/Metric Tons Shipping Terms : CIF Destination Port : Bangkok, Thailand Payment Terms : L/C Or Bank Transfer Looking for suppliers from : Worldwide Target Price : USD 15 per Ton/Tons Contact : Ooi
Buyer is interested to receive quotations for the following RFQ - Product Name: Monazite Sand Specifications : washed one for industry use 1 Aluminum (Al) mg/kg 18.00 2 Calcium (Ca) mg/kg 0.50 3 Cobalt (Co) mg/kg
Buyer is interested to receive quotations for the following RFQ - Product Name: RBD Palm Oil Specifications: For human consumption 1. THE PRODUCT: RBD Palm Oil as per the below specifications: S. No. ITEMS Values & Limits METHOD REFERENCE 1 Moisture& Impurities 0.10% MAX CAM-13A AOCS Ca2d-38 2 Free Fatty ACID as Oleic ACID 0.15% MAX CAM-02 AOCS Ca5a-40 3 Peroxide Value 6.0 MEQ/KG CAM-04 OCS Cd8-53 4. Color 5.25” Lovibond cell RED 4.5 MAX CAM-29 AOCS Cc 13b-45 5 SMP”C 36-40 CAM-01 AOCS Cc 3.25 6 Mineral Oil test NEGATIVE CAM-10 AOCS 28.133 1990 7 Unsaponifiable Matter Less Than 1.5% CAM-26 AOCS Ca 6a-40 2. 2 REQUIREMENTS: a) The Seller must meet the international standard set by phytosanitary inspectors with the SGS inspection report. b) The Seller guarantees that each shipment will receive an SGS inspection report regarding the product's weight, quantity, and quality at the loading Port. All inspections shall be as per ICC Rules and as per SGS standards and specifications given above. 3. QUANTITY OF PRODUCT During the year 2024, the quantities in Metric Tons (MT) will be as follows: Month Quantity MT September 7,000 October 10,000 November 12,500 – 21,000 December 12,500 – 21,000 6. PAYMENT TERMS Payment for each shipment will be 100% LC at Sight after the Buyer shall receive the documents listed below: a. Seller’s signed Commercial Invoice (3 Original Sets) b. Packing List (3 Original Sets) c. Certificate of Origin Form D issued by Chamber of Commerce. d. The Seller will bear the cost of the SGS report at the Loading Port, and the Buyer will bear the cost of the SGS report at the Destination Port. Total Quantity To be determined monthly. 4 PACKING & DELIVERY Bulk tankers shall deliver RBD Palm Oil to Port Qasim, Karachi, Pakistan. 5 PRICE TO BE QUOTED The price Per Ton for the product is to be Quoted US$ Per Metric Tons CFR, Port Qasim Karachi. The buyer will pay the insurance charges for the product. Quantity Required : 7000 - 21000 Metric Ton/Metric Tons Shipping Terms : CFR Destination Port : Karachi, Pakistan Payment Terms : 100% LC at Sight Looking for suppliers from : Malaysia, Indonesia Contact : Ahsan Rahim
Please quote for the following wholesale product requirement - Product Name: Tight Head Steel Drums Specifications : Quantity : 35 Million Barrels With in 4 months Size: 210L Specification: : Classification : Close & Open Top ( Lined / Unlined ) Steel Quality: Prime grade cold rolled steel, as per JIS G 3141 SPCC â?? SD Normal Drum Capacity: 210 Liters (55 Gallons) Steel Thickness (Body) : 0.7mm - 1.4mm Steel Thickness (Top & Bottom) : 0.7mm - 1.4mm External Height :883 mm +/- 3 mm External Diameter: 592 mm +/- 2 mm Internal Diameter : 572 mm +/- 2 mm Hoops :Two Rolling Hoops Corrugation: Set of 4 Corrugation on either side or rolling hoops expanded in the body Bungs: Two sets, fitted to the top of the drums ( Excluded in Open top) Bungs Size (Large) : 2 Bungs Size (Small) : 3/4 Color: As per customer's standard ( 2 - Colors / 3- Colors) External Surface : Painted with specially formulated Stoving Enamel Paint to the color specified by customer Internal Surface : 1. Plain 2. Primer Coat 3. Single or double coat of Epoxy Phenolic Lacquer Lining Top & Bottom Seam : Triple Seamed Body Seam : Electrically Welded Quantity :1000000000 to 15000000000 Drums Delivery : Saudi Arabia Dammam-KSA Delivery price : $5 Transport Conditions : CPT Quantity Required : MOQ Shipping Terms : CIF Destination Port : Dammam-Ksa, Saudi Arabia Payment Terms : LC, TT Looking for suppliers from : Worldwide Contact : Rajnikant J Parekh
(2s) 3 chloro 2 hydroxy n,n,n trimethylpropan 1 aminium chloride 2 amino 2 methyl 1,3 propanediol (cas: 115 69 5) 4 piperidinamine,2,2,6,6 tetramethyl (cas: 36768 62 4)
Phosphoric acid food grade 85% and 75%, phosphoric acid tech grade 85% and 75%, boric acid powder 99%, dmf 99%, dmso 99%, titanium dioxide, sulphur elemental (powder /lump) 99%, sodium sulphate non anhyrans flakes, calcium chloride dihydrate, sodium sulphate anhydrous, cmc food grade and tech grade, mono ethylene glycol (meg), polyethylene glycol (peg), zinc ash, zinc sulphate mono hydrate 33%, 27%, 21%, xanthan gum, edta fe 6%, edta acid, pvc rais, pvc resin (emulsin type), pvc resin (supension type), hpmc, hydrogen peroxide 25%, 35%, 50%, sles 70%, caustic soda flakes and pearls, oxalic acid, citric acid monohydrate, anhydrous citric acid, homopolymer polypropylene (pp), paste pvc resin, pvc resin sg 5, thiourea, stpp, sodium hydrosulfide, labsa, potassium hydroxide 99% (flaks), potassium carbonate 99%, sop 50%, 53%, mop, map, ammonium sulphate, ammonium sulphate caprolatum grade, dap, urea 46%, npk 20 20 20
Fluorspar (grades: 80% 85%, 75% 80%, 70% 75%, 65% 60% and below 60%), quartz (lump and fine sio2 97% 99%), silica sand (any mesh size si02 95% 98%), mangesite (mgo 43% to 50%), manganese (mn 25% to 35%), limestone (90% to 95%), gypsum (caco4 85% to 95%), dolomite, mica, feldspar, calcium carbonate, barite (sp gravity 4.1/4.2/4.3 & basf4 87% to 90%) and antimony (40% to 60%)
5 Chlorovaleryl Chloride (cas 1575 61 7)
