Buyer is interested to receive quotations for the following RFQ -
Product Name: Orthopedic Equipment And Implant
Specifications :
Type: Locking Plate System, Headless And Herbert Cannulated Screws, And Hip And Spine System
Packaging Terms : Customized
Quantity Required : MOQ
Shipping Terms : CIF Or FOB
Destination Port : Latin America,
Payment Terms : L/C Or T/T
Looking for suppliers from : Worldwide
Contact : Gerardo S
Please quote for the following wholesale product requirement -
Product Name: Silica Gel Mesh 3-5mm
Quantity Required : 5 Ton/Tons
Shipping Terms : CIF
Destination Port : Egypt
Payment Terms : L/C
Looking for suppliers from : Egypt
Contact : Hamdy Ebrahim
Buyer is interested to receive quotations for the following RFQ -
Product: Ortho Plates And Interlocking Nails
Specifications:
For Surgery Use
Quantity Required : 100 Piece/Pieces
Shipping Terms : CIF
Destination Port : Egypt
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Mohamed Hatem
Please quote for the following wholesale product requirement -
Product Name: Blockboards
Specifications:
3 layer panel product.
[material and dimensions]
The front and rear outer layers need to be 5mm thick solid cherry(American cherry), and the core is 9-12mm thick plywood(made in low hardness wood like poplar or spruce). So, the total thickness of the panel would be 19 - 22mm. For the width and length, they are 1220*1220mm.
We want both the front and rear cherry layers to be;
[cherry board grade]
- a premium grade with no knots or other imperfections
- straight grains most preferred, and curly grains to be avoided.
- surface to be sanded smooth.
[cherry board size and orientation]
- wide cherry boards to be used to have the minimum glue lines(8 cherry boards at most on each side of the panel, and fewer than 8 would be great).
- continous stave(no cherry boards are joined lengthwise)
- cherry boards are oriented in the same direction between the front and the rear of the panel.
[glue for cherry boards]
- polyurethane glue preferred, D4. If you have a better alternative, please advise. The dried glue needs to be less hard than the surrounding cherry wood.
- Please note that in our use of the panel, it can be in contact with water often, for hours each time.
- Surfaces to be glued need to be fully covered with glue, without missing any part resulting in dry joint, so that water does not penetrate in such a dry joint and split the joint.
- light tight between adjoining boards when glue is not applied yet(You cannot see light come through from the opposite side, meaning all board edges are very straight. Once the boards are glue joined, the glue line is almost invisible.)
Quantity : 20 foot container load for the initial purchase
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Sydney, Australia
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Steve Bae
Please quote for the following wholesale product requirement -
Product Name: 3 Layers Chrome Plated Shelves With Wheels
Specifications:
mobile logistics e-commerce picking trolley
Color: Silver White
Purity: High Purity
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Dubai, United Arab Emirates
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Roselyn Mostrado
Buyer is interested to receive quotations for the following RFQ -
Product: Orthopedic Implants
Specifications:
Type: Orthopedic Plates And Screws
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : United Arab Emirates
Payment Terms : LC
Looking for suppliers from : Philippines, India
Contact : Jamal
Please quote for the following wholesale product requirement -
Product: Orthopedic Implant Surgical Suture Anchors
Specifications:
1.0 mm suture anchors
Instrument classification: Class 3
Quantity Required : MOQ
Shipping Terms : CIF/ FOB
Destination Port : Mexico, Mexico
Payment Terms : LC/ TT
Looking for suppliers from : Worldwide
Contact : Eduardo Banda
Please provide a quotation to the following requirement from importer -
Product : Steel Plate Carbon, Hot Rolled, Alloy
Specifications:
STRUCTURE ANNEALED (LENGTH= 1000MM+ 10/-0) X
WIDTH (180 MM + 5/-0) XTHICK (6MM ± 0.30MM)
NO.35 Cr. Mn SiA
CHEMICAL COMPOSITION
C=0.32-0.39% Si=1.10-1.40%
Mn=0.80-1.10% Cr-1.10-1.40%
P=Max 0.025% S=Max 0.025%
Cu= Max 0.25% Ni = 0.30%
MECHANICAL PROPERTIES
Tensile strength=600-800(MPa)
Elongation = 16% Min
Quantity: 30,400 Kg.
ITEM # 2:
STEEL PLATE CARBON, HOT ROLLED, ALLOY
STRUCTURE ANNEALED (LENGTH= 1000MM+ 10/-0) X
WIDTH (180 MM + 5/-0) XTHICK (6MM ± 0.30MM)
NO.35 Cr. Mn SiA
CHEMICAL COMPOSITION
C=0.32-0.39% Si=1.10-1.40%
Mn=0.80-1.10% Cr-1.10-1.40%
P=Max 0.025% S=Max 0.025%
Cu= Max 0.25% Ni = 0.30%
MECHANICAL PROPERTIES
Tensile strength=600-800(MPa)
Elongation = 16% Min
Quantity: 35,700 Kg.
SPECIAL CONDITIONS: To be followed by Shipper/Maker;
1. Same (Single) competitive Unit Rate must be quoted against the same tendered items.
2. Full Qty falling in both inspection authorities must be quoted otherwise offer will be ignored.
3. Sample to be provided by the firms within 15 x days of technical opening except last Supplier,
4. Validity of offer at least 90 days (Extendable if required) would be considered w.e.f
commercial opening of tender (s) after acceptance of technical offers
5. Conditional offers are likely to be ignored.
6. Needful supporting technical literature/ Catalogue/ Brochure against each tender it
must accompany technical quotation if requisite/relevant technical literature found
missing, quotation will be considered rejected.
7. Performance Bond (in shape of CDR/B.G) should be provided against L.O.I for issuance of formal contract. However,
20 The supplier will render a Warranty / Guarantee Certificate for a period of 12 x months
from final acceptance of store
21 Protocol of inspection will be followed as per inspection authorities.
Further requirements:
· Supplier type: manufacturer
35 tons approx
Quantity Required : 35 Ton/Tons
Shipping Terms : CIF
Destination Port : Pakistan, Pakistan
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Rashid Akhtar
Ortho implants & instuments
Please quote for the following wholesale product requirement -
Product Name: MS Plates
Specifications:
A1) MS Plates: Grade S355JR
1. Plate 4mm thick
2. Plate 5mm thick
3. Plate 6mm thick
4. Plate 8mm thick
5. Plate 10mm thick
6. Plate 12mm thick
7. Plate 15mm thick
8. Plate 16mm thick
9. Plate 20mm thick
10. Plate 24mm thick
11. Plate 30mm thick
A2) MS Plates: Grade S275
1. Plate 4mm thick
2. Plate 5mm thick
3. Plate 6mm thick
4. Plate 8mm thick
5. Plate 10mm thick
6. Plate 12mm thick
7. Plate 15mm thick
8. Plate 16mm thick
9. Plate 20mm thick
10. Plate 24mm thick
11. Plate 30mm thick
Quantity Required : 250 Ton/Tons
Shipping Terms : cif/fob
Destination Port : Qatar
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Azeemuddeen
Medical implants like stents, ortho implants
The buyer would like to receive quotations for -
Product Name: Orthopedic Implants
Specifications:
Type: Locking Plates & Implants
Size: Standard (Customized)
Standard Specifications
Quantity Required : 3000 Piece/Pieces(sample)
Shipping Terms : FOB
Destination Port : Malaysia
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Zulkifli
3 Ply Mask And Areca Leaf Plates
Orthopedic implants and instruments of stainless steel and titanium
Orthopaedic implants, plates
3 ply earloop face mask,kn95,covid 19 products, orthopedic implants etc.
Please quote for the following wholesale product requirement -
Product Name: Steel Plates
Specifications:
Steel - (S)235j2
Steel Thickness: Demand Per Month
2mm - 10 tons
3mm - 4 tons
4mm - 8 tons
5mm - 1,5 tons
6mm - 3 tons
8mm - 4 tons
15mm - 5 tons
Steel - (S) 355mc
4mm - 1 Ton
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Ukraine
Payment Terms : To be discussed with suppliers
Looking for suppliers from : Worldwide
Contact : Olga Rudenko
Ortho, trauma and spinal implants and instruments
Ortho, trauma and spinal implants and instruments
Please quote for the following wholesale product requirement -
Product Name: Metal Plates
Specifications :
Type: Brass, Aluminum, Steel, Etc.
Different Sizes And Shapes
Form: Plates Plates For Industrial Use
Thickness: From 0.15mm To 5mm
Packaging Terms : Standard
Quantity Required : MOQ
Shipping Terms : FOB
Destination Port : Switzerland
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Beat Rupp
