Please quote for the following wholesale product requirement -
Product Name : Electrical Cable
Specifications:
6/10 (12) KV Multi Core DST Cables
3X95MM2 6/10 KV ELECTRIC CABLE CU/DST XLPE PVC 2007
1 Voltage Rating: 6/10 (12) kV
2 Test Voltage: 21 kV
3 Temperature Range: Fixed: -20°C to +90°C
4 Minimum Bending Radius: 15 times the overall diameter
5 Conductor: Stranded copper conductor
6 Insulation: XLPE (Cross-Linked Polyethylene)
7 Screen: Copper wires
8 Outer Sheath: PVC (Polyvinyl Chloride)
9 Sheath Color: Red
10 Armoured: DST(Double steel trap)
11 Flame Retardant: Complies with IEC/EN 60332-1-2 standards
Quantity Required : 1000m
Quantity Required : 1000 Meter/Meters
Shipping Terms : CIF
Destination Port : Dammam, Saudi Arabia
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Md Miran Siddique
Guy grip dead end, cable galvanized astm a475
Please provide a quotation to the following requirement from importer -
Product Name: Electrical Wire And Cable wire
Specifications:
Type with spec :
Electricity
C.18 Electrical wires
2.5mm2 m 1359
C.19 Electrical wires
6mm2 m 1210
C.20 Garden disk ceiling lights
Specification model: AC220V 22W set 99
C.21 double tube fluorescent lamp Specification model: AC220V 22W*2 set 46
C.22 Floodlights
1. Specification model: AC220V 22W. set 7
C.23 Single switch
1. Specification mode:AC220V 10A set 69
C.24 Socket outlets
Surface-mounted 5-hole socket outlets.Surface fix set 132
C.25 Air conditioner socket outlet
1. Specification mode:AC220V 16A set 22
C.26 Light Strip
LED-Light Strip LED set 363
C.27 Cable trunking
Material, specification: 400*200 galvanized steel. m 99
C.28 Cable trunking
150*80 PVC m 187
C.29 Cable trunking
Material, specification: 150*80 galvanized steel. m 110
C.30 Cable trunking
Material, specification:50*30 PVC high-strength engineering plastic. m 220
C.31 Hot-dip galvanized steel pipe
DN150 m 344
C.32 Hot-dip galvanized steel pipe
DN100 m 165
C.33 Hot-dip galvanized steel pipe
DN50 m 220
C.34 Power conduit
CPVC de160 m 330
C.35 Hot-dip galvanized flat steel
Grounding busbar - 40x40 m 110
C.36 Grounding electrode
50X2500 galvanized set 11
C.38 Cable trunking
Arched floor-mounted cable trunking, 50mm wide, made of aluminum alloy. m 110
C.41 cable terminal 1. Specification mode:(3~5) core 185mm2-249mm2 set 50
C.42 cable terminal 1. Specification mode:(3~5) core 120mm2-184mm2 set 50
C.43 cable terminal 1. Specification mode:(3~5) core 70mm2-119mm2 set 50
C.44 cable terminal 1. Specification mode:(3~5) core 35mm2-69mm2 set 50
C.45 cable terminal 1. Specification mode:(3~5) core 17mm2-34mm2 set 50
C.46 cable terminal 1. Specification mode:(3~5) core 10mm2-16mm2 set 50
C.47 cable terminal 1. Specification mode:(2~3) core 1~ 10mm2 set 300
Plambing
C.55 Water supply pipe
PE pipe DN125 (include fittings) m 60
C.56 Water supply pipe
PE pipe DN90 (include fittings) m 172
C.57 Water supply pipe
PE pipe DN75 (include fittings) m 26
C.58 Water supply pipe
PE pipe DN63 (include fittings) m 66
C.59 Water supply pipe
PE pipe DN40 (include fittings) m 445
C.60 Water supply pipe
PE pipe DN32 (include fittings) m 50
C.61 Water supply pipe
PE pipe DN25 (include fittings) m 50
C.62 1 Type: Copper globe valve
2?Specification, pressure rating: DN125, PN=1.0MPa set 2
C.63 1 Type: Copper globe valve
2?Specification, pressure rating: DN90, PN=1.0MPa set 1
C.64 1 Type: Copper globe valve
2?Specification, pressure rating: DN75, PN=1.0MPa set 1
C.65 1 Type: Copper globe valve
2?Specification, pressure rating: DN32, PN=1.0MPa set 3
C.66 Sewage pipe
Material and specification: HDPE double-walled corrugated pipe DN300 m 150
C.67 Sewage pipe
HDPE double-walled corrugated pipe DN225 m 500
C.68 Sewage pipe
Rigid PVC drainage pipe, De110. m 224
C.69 Sewage pipe
Rigid PVC drainage pipe, De75. m 54
C.70 Sewage pipe
Rigid PVC drainage pipe, De160. m 16
C.73 Sewage pipe
Rigid PVC drainage pipe, De50. m 66
C.74 Hot water pipe
PP-R pipe, De50.PN=1.0mpa (include fitting) m 30
C.75 Hot water pipe
PP-R pipe, De32.PN=1.0mpa (include fitting) m 30
C.76 Mixing valve and
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Philippines
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Mairamae Neri
The buyer would like to receive quotations for -
Product Name: Galvanized Steel Cable Wire Rope And Wire Strands
Specifications:
Standard: AiSi
Grade: Stainless Steel
Tolerance: ±1%
Steel Grade: 304
Steel Grade: 316
Steel Grade: 316L
Length: 500m/reel,1000m/reel or Customization
Application: Metallurgy, Chemicals
C Content (%): ~0.08%
Si Content (%): ~1.00%
Surface Finish: Polished
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : India
Payment Terms : To be discussed with the Supplier
Looking for suppliers from : Worldwide
Contact : Divyayush Hitech Agri
Crane, access, swamp and timber, wire rope, galvanized cable, 1x7, 7x19, 6x26 iwrc ir fiber core, used cable, turnbuckles, rope apple boxes, hops, barbed wire
Buyer is interested to receive quotations for the following RFQ -
Product: Medical Supplies
Specifications:
Nasogastric Tube N#18
Open Valve Solution Tube N#14
Disposable Respiratory Circuit For Airbo 2 Adult
Opt 844 High Flow Adult Nasal Cannula Size M
Terum Infusion Pump Set
Suction Tube N#14 Closed
Suction Tube N#16 Closed
Nutrifo Bag
60cc Syringe Catheter Tip
Angiocath Catheter N#22
Heparinized Catheter
50 Cc Syringe
Cystoflo
10 Cc Syringe
Vicryl 1 Ct – 1 Sachet
Adult Resuscitator
Flexible Corrugated Extension Tube For Anestheses
Sterile Gauze 7.5 Cm X 7.5 Cm Envelope X 5 Units
Adult Electrodes
Silicone Rubber X 3 Mts
Adult/pediatric Hygroscopic Filters
Adult Ventilator Circuit Set
Medium Compress Cover Up To The Par-cardinal Knee
Spinocan Needle N#25
Macro Drip Equipment
Three-way Keys
Angiocath Catheter N#20
Thermal Blanket Adult
X-tra Tx Auto Transfusion System Set / 125
Suction Probe With Open Valve N#16
Anesthesia Extension Equipment
Disposable Gowns (long Sleeve)
Endotracheal Tube 7.5 C/b
Square Battery 9v
Saferminer 1500 Semi-rigid Liner (surgery) Kayco
Photosensitive Kit
Single Pressure Transducer
Opt 846 High Flow Adult Nasal Cannula Size L
Bladder Probe N° 20 2 Ways
Adult Micro Nebulizer Set
High Flow Disposable Nasal Cannula Size M
Nasogastric Probe N° 20
Glucometric Trims Box X 50
Blood Transfusion Equipment
Disposable Mouth Caps
5cc Syringe
Thorax Tube N° 28
3 Way Central Catheter 7.0 Fr Adult Lines
6x7 Cm Sterile Dressing
10x12 Cm Sterile Dressing
Bladder Probe N° 18 2 Lines
Tracheostomy Mask Adult
Three-chamber Chest Drainage System Aquacil
3/0 Ks Silk Straight Needle – Envelope
Proaqt Sensor
Sterile Gloves N° 7 – ½
Nelaton Probe N° 10
Safety Gloves 2.9 L
Crepe Paper Roll 100 Mts
Tape Roll
Bag For Transfer Of Corpses 2.20 Mts X 0.70 – C.4
20 Cc Syringe
Disposable Gloves Box X 100 Size (ml)
Insulin Syringe
Percutaneous Tracheostomy Kit 7 Ref 320 – 07 Tracoe
Percutaneous Tracheostomy Kit #9
Reuse Cuff #11 1 Way (adult)
Ecg Cable 5 Leads
Disposable Laryngoscope Video Sheet
Adult Oxygen Cannula
Adult Urine Collector
Fixomul 10x10 Roll
Angiocath Catheter N#14 Short
Plastic Nipples
Luker Trap Specimen Or Traps
Disposable Caps
Humidifier
Clinical Thermometer
Liner Container 2000 Ml Flexible Solution
Reuse #9 1 Way Cuff
Sterile Pads 45x45 Cm Pack X 5
Respiratory Incentive Spirometer
High Flow Disposable Nasal Cannula Size L
Electrostimulation Electrodes (tens)
Endotracheal Tube 5 C/b
Femoral Arterial Catheter 20g X 8 Cm
Angiocath Catheter N° 18
Silk 2.0 Straight Needle
Silk 2.0 Sc-26 Envelopes Bone
Marrow Biopsy Needle 11g X 4 (10cm)refdbmnj1104 Bretrol
Mcrath Video Laryngoscope Battery
Colostomy Bag N° 70
Available Video Laryngoscope Sheet 3
Enterogermina Bacillus Clausii 2000 Million X 5 Ml
Disposable Needle N° 18 Gx 1 ½
Bone Marrow 11g X 4(10cm) Ref Dbmnj1104
Available Video Laryngoscope Sheet 2
Scalpel Blade N° 20
Scalpel Blade N° 11
Guedel Cannula N° 5
Colostomy Barrier N° 70
Laryngeal Mask N° 4
1 Sphere Respiratory Incentive (triburte)
Act Cartridge For Measuring Coagulation Ref 402.03
Adult Anesthesia Circuit Set
Cotton 500 G Roll
Femoral Arterial Cannula 21fr96570-021
Thorax Tube N° 30
Reuse Cuff #9 1-way
Available Cover For Express Compress Up To The Knee Large Cardinal Par
Single Neurothoracic Set 8fr X 16 Cm
Percutaneous Centesis Set Straight 12-fr (single)
Thorax Tube N° 34
Guedel Cannula N° 4
Nasogastric Tube N° 16
Spinocan Needle N° 20
Nelaton Probe N° 06
Nelaton Probe N° 12
Aerosolar Therapy T-adapter
Ventury Mask Adult
Inhalochamber
Sterile Gloves N° 7
Sterile Gloves No. 8
Cateter For Gastocardiac By Thermodiluction
Endotracheal Tube 7.0 C/b
Endotracheal Tube 8.0 C/b
Filters For Fans
6x5 Cotton Bandages
Elastic Bandages 6x5
Spinocan Needle No. 26
Endotracheal Tube 7.0 C/b
Endotracheal Tube 8.0 C/b
Filters For Fans
6x5 Cotton Bandages
6x5 Elastic Bandages
Spino
Buyer is interested to receive quotations for the following RFQ -
Product Name: Solar Lantern
Specifications:
1.560L Capacity chest freezer, performance to ISO 22042:2021 or equivalent to international standards. 2. 4.5” thickness wall insulation, polyurethane insulation material 3. Double top door and lock. 4. Automatic voltage detection to protect battery from over drain (Cut off at below 10.5vdc) 5. 12/24vdc compressor operated 6. Power supply – 12/24vdc 7. Charge controller 30amps, 8. Supply line protection unit- Fuse or circuit breaker 30amps 9. Wiring - 4mm cable Red and Black – 20meters each 10. X2- 200Ah deep cycle sealed, maintenance free batteries (long life) 11. X2 - 250watts Solar panels (PV) – Mono-crystalline type 12. X2 – Foldable galvanized solar panel brackets with adjustable settings. 13. Digital adjustable temperature control 14. Refrigeration compressor – 12/24vdc 15. Refrigerant – R- 134a – (CFC- Free) 16. Should operate in conditions reaching temperature of 43°c and above ambient temp 17. X1 stainless steel battery box to fit the batteries 18. Must freeze to between -10 and - 18°C at 43°C approximately ambient temperature. 19. Fitted with temperature recorder: - Data logger, records temperature after every 15 mins, stores data 2-year battery power before change. 20. X4 Fish boxes- Fitted with insulated fish boxes delivered inside the chest freezer with 50ltrs capacity. . 21. Grounding kit: copper plated 8ft long grounding rod with clamps and 30ft bare copper wire
Qty : 50 Units
Quantity Required : 50 Unit/Units
Shipping Terms : CIF
Destination Port : India
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Khushboo
The buyer would like to receive quotations for -
Product: Bicycle Spare Parts
Specifications:
1. Frames 2. Forks 3. Handlebars 4. Grips 5. Saddles 6. Chain 7. Wheels 8. Tires and Tubes 9. Brakes (including calipers, pads, and levers) 10. Drivetrain components (including chainrings, chains, cassettes, and derailleurs) 11. Pedals 12. ChainWheel & Cranksets 13. Bottom brackets 14. Headsets 15. Shifters 16. Cables and housing 17. Bearings and bushings 18. Reflectors and lights 19. Fenders 20. Kickstands 21. Bottle cages 22. Bike locks 23. Bike racks and carriers 24. Tools and maintenance equipment 25. Bicycle carrier 26. Bicycle paddle 27. Axle 28. Fork fitting 29. Mudguard 30. Coaster Brake 31. Chain wheel cover 32. Bicycle bell'
Qty: MOQ
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : India
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Abdul
Steel Wire Ropes, Steel Wires Galvanized & Un Galvanized, P.c Strands & Spiral Wire, Acsr Core Wire, Steel Billets, Steel Re Bars, Steel Sheets, Steel Drums, Copper Enamel Wires, Electrical Power Cables, A.a.c & A.c.s.r Bare & Insulated Conductors, Synthetic Leather,i.e. Pu Dry, Semi Pu, Pvc Leather, Flocked Fabrics, Pvc Sheets
Steel Wire Ropes & Wires Galv & Un Galvanized, P.c Strands, Steel Re Bars, Copper Aluminum Steel Clad Wires, Copper & Aluminum Enamel Wires, Electrical Power Cables, Acsr Core Wire, Steel Billets, Aac, Acsr & Aaac Conductors, Steel Sheets, Steel Drums, Synthetic Leather Like Pu Dry, Semi Pu, Pvc Leather, Flocked Fabrics, Pvc Sheets
The buyer would like to receive quotations for -
Product Name: Contactors
Specifications :
Details With Qty :
1 Lens Green Colour Type: ZB2-BV013 - Make: Telemchanique ($990E00801) 5
2 Circuit Breaker 6-10A GV2-M14 - Make: Telemechanique ($990E10744) 2
3 Contactor 110V - 1 N C TYPE:LC1-D18F7 - Make:Telemecanique ($990E11408) 3
4 Contactor 220.V LC1D25M7- Make -Telemecanique ($990E11510) 2
5 Contact Block REF:XEN-G1191 - Make : Telemecanique ($990E17004) 5
6 Selector Switch 2 Position Stay Put Xb2-bj21, 2n/o, Make: Telemecanique ($990e75002) 3
7 P.V.C Cable Gland No:11 ($995e10100) 16
Quantity Required : 5 - 16 Unit/Units
Shipping Terms : CIF
Destination Port : Bahrain
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : A.K. Babu
The buyer would like to receive quotations for -
Product Name: Suspension Clamp With Bracket
Specifications :
Accessories For Aluminum Self-supported Insulated Aerial Bundled Cable
Quantity
1.Accessories for aluminum self-supported insulated aerial bundled cable for attachment to poles complete
As follows:
1.1 Dead end clamp for 70 mm2 neutral messenger. No. 15000 Pcs
1.2 Suspension clamp with bracket
No. 6000 Pcs
Conductors for phases must be hard-drawn aluminum round compacted stranded with size of (120, 95&50) mm2 while street lighting conductor is 25 mm2.The neutral conductor must be of aluminum alloy (95,70&35) mm2. All cores are black (XLPE) weather and Ultra-Violet (UV) resistance insulated, in accordance to NFC Standard or equivalent.
Tension charts for the required types of cables should be submitted with the offer to cover the following design conditions:-
Cold area Hot area
Min. ambient temp............... Deg C -10 0
Every day temp.................... Deg C 20 25
Max. ambient temp............... Deg C 40 50
Wind Loading (over ice).......... (N/m2) 700 700
Ice loading (radial thickness)... (mm) 10 0
A factor of safety at min. temp. 2.5 2.5
The factor of safety at everyday temp. 5 5
The main dimensions of the low voltage twisted cable 0.6 / 1 kV
(3*120+25+70 (mm2, are as follows:)
-Main phase conductor = 120 mm2
-Construction = 19 wires- hard drawn aluminum round compacted stranded
-Insulation thickness = 1.8 mm-XLPE
-Lighting conductor construction = 25 mm2
-Construction = 7 wires - hard drawn aluminum round compacted stranded
-Insulation thickness = 1.4 mm - XLPE
-Neutral conductor construction = 70 mm2 AL Alloy
-Construction = 7 wires - Non compacted
- Insulation thickness = 1.6 mm XLPE
-Approximate Nominal overall diameter of cable = 45 mm
-Nominal weight of cable per meter =1.65 kg
Main phase and lighting conductors are twisted around neutral; breaking load:
120 mm2 phase conductor aluminum = 14 kN 25mm2 lighting conductor aluminum = 2.5kN 70 mm2 neutral aluminum alloy =20.6kN
Max. D.C. resistance at 200 C:
120 mm2 phase condominium =0.253 ohm/km 25 mm2 lighting conductor aluminum =1.2 ohm/km 70 mm2 neutral aluminum alloy =0.493 ohm/km
The main dimensions of the low voltage twisted cable 0.6 / 1 kV
(3*95+25+70 (mm2, are as follows:
-Main phase conductor = 95 mm2
-Construction = 19 wires- hard drawn aluminum round compacted stranded
-Insulation thickness = 1.8 mm-XLPE
-Lighting conductor construction = 25 mm2
-Construction = 7 wires – hard drawn aluminum round compacted stranded
-Insulation thickness = 1.4 mm - XLPE
-Neutral conductor construction = 70 mm2 AL Alloy
-Construction = 7- Non compacted
-Insulation thickness = 1.6 mm XLPE
-Approximate Nominal overall diameter of cable = 45 mm
-Nominal weight of cable per meter =1.357 kg
Main phase and lighting conductors are twisted around neutral; breaking load:
95 mm2 phase conductor aluminum = 14 kN 25mm2 lighting conductor aluminum = 2.5kN 70 mm2 neutral
-Lighting conductor construction = 25 mm2
-Construction = 7 wires – hard drawn aluminum round compacted stranded
-Insulation thickness = 1.4 mm - XLPE
-Neutral conductor construction = 70 mm2 AL Alloy
-Construction
Quantity Required : 21000 Piece/Pieces
Shipping Ter
The buyer would like to receive quotations for -
Product Name: Charger Parts
Specifications
Part Name with Required Quantity
Sr No Part description Quantity
1 32 C16 IEK part MAD225016C30 1
2 Circuit breaker M06N 1P C 10 part ARM06N1C010 IEK 1
3 Circuit breaker M06N 3P D 16 IEK ARM06N3D016 1
4 Car antenna GSM90018003G4G KC67002700A KROKS 3
5 Long life battery 12V5Ah HML125 1
6 APSM301411019 EVcharger management controller 1
7 APSM46836200101 controller GBT 1
8 Distribution terminal block plckbr250 EKF 3
9 Power supply SDR12012 Mean Well 1
10 Power supply SDR48024 Mean Well 1
11 Power supply SDR7512 Mean Well 1
12 Power supply WDR605 Mean Well 1
13 Power supply with UPS function 12V DRC60A MEAN WELL 1
14 Circuit breaker 57353400101601600690AC3 1
15 Circuit breaker 3P ARM06N3C063 ARMAT IEK 2
16 Hygrostat adjustable MFR012 1
17 Connecting sleeve GSI 15kW 2
18 Temperature sensor DTS 01410002252 Oven 2
19 Current sensor RUMO 300L IDM 2
20 Driver RGB Matrix Hat for Raspberry Pi 1
21 EVcharger connector CCS2 150A with cable 5m MEDCT150AV0350M Degson 1
22 EVcharger connector GBT DC 200A with cable 5m MGDCT200AV0350M Degson 1
23 Current measure transformer 301505505S3 3
24 Data cable 16 pin 50 sm 1
25 Camers IPTRONIC IPTIP4DM36W Lite 1
26 Terminal block 15EDGK3503P1400AH Degson 1
27 Terminal block 15EDGK3504P1400AH Degson 1
28 Terminal block 15EDGKA3502P14100AH Degson 2
29 Terminal block 15EDGKA3504P14100AH Degson 1
30 Terminal block 15EDGKA3506P14100AH Degson 2
31 Terminal block 15EDGKD2503P1400AH Degson Electronics 1
32 Terminal block 2level 25 mm2 with internal jumper grey PIK25NK 317129 Klemsan 2
33 Terminal block PIK25NDA 317219 Klemsan 3
34 Terminal block plug 2EDGK50804P1400AH Degson 1
35 Screw terminal block from the network gateway kit Modbus 24 Oven 2
36 Terminal block from the switch ISW500T PLANET 1
37 Terminal block DINrail ground AVK 254TK 334450 Klemsan 4
38 Terminal block DINrail ground AVK 35T RD 334210 Klemsan 2
39 Terminal block DINrail grey AVK4 RD RP 304210RP Klemsan 31
40 Terminal block DINrail blue AVK4 RD RP 304211RP Klemsan 9
41 Terminal block socket 2EDGKR50804P1400AH Degson 1
42 Button GQ19F10EGB12S DUAL LED 12V ONPOW 2
43 Button GQ19F10ERN 12V RUICHI 1
44 Button 5611mFCred1no1ncgribIP65KEAZ 1
45 Switch ISW500T PLANET 1
46 Contactor NDZ3X30010 DC936V NADER 6
47 Contactor modular 6340 ACDC MKK216340 IEK 3
48 Fast charging controller CCS PSHMA46836200213 Promelectronica 1
49 End switch MSW04 ONON RUICHI 2
50 Test transition box IKP part SQ08360003 TDM 1
51 Router RUT955 Teltonika 1
52 Microcomputer Raspberry Pi 4 Model B 4GB 1
53 Analog input module WBMAI6 Wiren Board 1
54 Power module rectifier 30kW 2
55 Heater with fan SNV880000 800230 SILART 1
56 Axial fan G1750D24X7PBHL 1
57 Jumper TKKPRS 476900 Klemsan 1
58 Jumper UK42 476232 Klemsan 1
59 Jumper for AVK25 PIK25N 10 poles UK2510 474129 Klemsan 1
60 Jumper for AVK4RD 4 poles UK 44 476234 Klemsan 4
61 Fuse EFX3200a36 200A ADLER Elektrotechnik 2
62 Industrial memory card 32GB Industrial microSDHCTransFlash Class 10 SDCIT232GB Kingston 1
63 Power supply connectro 210 550 140314 1
64 Resistor CF100 14 11 5 1
65 Resistor CF25 14 025 120 5 1
66 Resistor CF25 14 025 120 5 1
67 Resistor CF25 14 025 120 5 1
68 Relay 230V 8 KPRSWE230VACDC2C 272 620 Klemsan 1
69 Relay KPRSWE12VACDC2C 272520 Klemsan 1
70 Relay KPRSWE24VACDC2C 272540 Klemsan 5
71 Insulation monitoring relay RKI21000 APSM41112600101 1
72 Socket 15EDGKD2503P1400AH DEGSON 2
Quantity Required : 230 Piece/Pieces
Shipping Terms : CIF
Destination Port : India
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Amey Brahme
Please provide a quotation to the following requirement from importer -
Product Name: Spare Parts For Ac
Specifications:
Akai Indoor And Outdoor
Asa18tr And Asa24tr (under The Akai Brand), Kindly Submit Your Best Offer In Accordance With The Accompanying Bill Of Quantities (boq) And Include The Brand And Model Number Or, If Technically Compatible, The Following Information:
B. Schedule Of Prices
List Of Spare Parts For Akai Air Conditioner Asa24tr And Asa18tr Indoor And Outdoor Units
S.no Part No. Part Name UOM Min Quantity Max Quantity
1 41109-000028 Installation Plate EA 1 1
2 41199-002688 Base EA 1 1
3 42004-000042 Cross Fan EA 2 6
4 92011-002981 Evaporator EA 2 4
5 41103-000050 Water Drainage Assembly EA 1 4
6 41101-000035 Vertical Vane Assembly EA 1 3
7 41101-000125 Vertical Vane Connector 1 EA 1 3
8 41103-000317 Up Vane EA 1 8
9 41103-000312 Down Vane EA 1 8
10 41106-002275 Face Frame EA 1 2
11 42008-000041 Air Filter EA 2 6
12 31102-000058 Display PCB EA 4 8
13 41106-002198 Front Panel EA 1 2
14 41211-000061 Cable Clamp EA 1 4
15 11304-100028 Terminal EA 1 4
16 41211-000008 Terminal fixing board EA 1 2
17 31101-000593 Main PCB EA 4 8
18 10104-100014 Indoor Sensor Assembly EA 6 12
19 41105-000123 Electrical Box EA 4 8
20 41105-000154 Electrical Box Cover EA 1 3
21 41101-000118 Vertical Vane Connector 2 EA 2 4
22 41101-000113 Vertical Vane Connector 3 EA 2 4
23 22001-000326 Step Motor EA 2 4
24 42001-000006 Step Motor Supporter EA 2 4
25 22001-000322 Vane Motor EA 2 4
26 22001-000240 Indoor Motor EA 3 6
27 41108-000006 Indoor Motor Cover EA 2 4
28 42009-000004 Drainage Hose EA 2 4
29 92007-002000 Capillary Assembly EA 3 9
30 92014-000401 "Compressor
and It Accessories" EA 3 9
31 92006-000400 Discharge Pipe EA 2 6
32 92007-003171 Suction Pipe EA 2 6
33 41202-000179 Base EA 1 1
34 92008-000051 Two-way Valve EA 2 6
35 92008-000142 Three-way Valve EA 2 6
36 42001-000106 Cable Clamp EA 1 6
37 11304-100004 Terminal EA 1 6
38 22003-000007 Compressor Capacitor EA 4 8
39 22008-000003 AC Contactor EA 6 12
40 40000-000019 Installation Plate EA 1 1
41 40010-000018 Base EA 1 1
42 41101-000042 Vertical Vane Assembly EA 1 2
44 41507-000076 Vertical Vane Connector EA 1 2
45 41103-000142 Vane EA 1 4
46 42004-000002 Cross Fan EA 4 8
47 42007-000001 Bearing Mount EA 6 12
48 92011-002820 Evaporator EA 2 4
49 41106-002351 Face Frame EA 1 3
50 41108-000066 Screw Cover EA 6 20
51 42008-000001 Air Filter EA 2 6
52 42003-000001 Display PCB Box EA 4 8
53 31102-000084 Display PCB EA 3 6
54 41106-001675 Front Panel EA 1 2
55 22007-000023 Power Supply Cord EA 1 1
56 41105-000146 Electrical Box Cover EA 2 4
57 11304-100029 Terminal EA 1 4
58 42001-000103 Cable Clamp EA 4 8
59 10502-100021 Transformer EA 2 6
60 31101-000585 Main PCB EA 4 8
61 41105-000104 Electrical Box EA 2 4
62 22001-000271 Indoor Motor EA 4 8
63 42003-000045 Indoor Motor Cover EA 4 8
64 41108-000058 Step Motor connector EA 2 4
65 22001-000318 Step Motor EA 2 4
66 42001-000004 Step Motor Supporter EA 2 4
67 42009-000011 Drainage Hose EA 2 4
68 22001-000321 Vane Motor EA 2 4
69 41101-000224 In and Out Pipe Fixer EA 2 4
70 22013-001723 Remote Controller EA 4 8
71 42011-000188 Back Grille EA 4 12
72 41207-000028 Top Cover EA 4 8
73 92011-000667 Condenser EA 4 8
74 41203-000049 Outdoor Motor Supporter EA 2 4
75 22001-000088 Outdoor Motor EA 4 8
76 42004-000105 Propeller Fan EA 6 12
77 41205-000117 Left Plate EA 2 4
78 41206-000047 Front Plate EA 2 4
79 42011-000085 Fan Guard EA 4 8
80 92007-001705 Capillary Assembly EA 4 8
81 92014-000261 Compressor EA 6 12
82 92006-000345 Discharge Pipe EA 6 12
83 92007-003174 Suction Pipe EA 6 12
84 41202-000148 Base EA 1 2
85 92008-000018 Two-way Valve EA 4 8
86 41204-000018 Valve Supporter EA 4 8
87 92008-000124 Three-way Valve EA 4 8
88 41205-000075 Right Plate EA 1 2
89 41201-000029 Electrical Box Cover EA 6 12
90 42001-000030 Capac
Buyer is interested to receive quotations for the following RFQ -
Product Name: Fasteners
Specifications :
Type: Nuts, Bolts And Washer
LI 008: 5/8 x 7 Galvanized Carriage Bolts, 40 Cases, EA
LI 009: 5/8 Galv. Nuts, 40 Cases, EA
LI 010: 5/8 Galv. Washers, 40 Cases, EA
LI 012: Hanger Nails, Galv. 16D (50lb Box), 1, Box
LI 013: Hanger Nails, Galv. 8D (50lb Box), 1, Box
LI 054: Pneumatic Finish Nails, 2in , 18 Ga, (1000 Count), 1, EA
LI 055: Pneumatic Finish Nails, 2in , 16 Ga, (1000 Count), 1, EA
LI 056: Exhaust Vent, Vinyl, For Gable End, With Nailer Trim, 2, EA
Origin: Must Be TAA Compliant Country
Quantity Required : 40 Case/Cases
Shipping Terms : FOB
Destination Port : United States
Payment Terms : Letter Of Credit (Credit Account)
Looking for suppliers from : Worldwide
Contact : Jennie Walker
Buyer is interested to receive quotations for the following RFQ -
Product Name: Laptops, CPU, Monitors, Printers And Desktop
Specifications :
Technical Specifications
Name of Procurement: Supply and Delivery of Office Equipment
1. Laptops: Quantity - 3 Nos
Processor: 11th Generation lntel Core i7 RAM: 16 GB RAM, DDR4
Storage: 512 GB SSD Video: Intel® Iris® Xe Graphics Display: 13” PixelSense™ Flow Display Network: WiFi, Bluetooth
2 x USB-C® with USB 4.0/Thunderbolt™4
Input / Output
1 x Surface Connect port
Ports:
Universal Audio Combo Jack
Webcam:5.0MP front-facing camera with 1080p full HDvideo 10.0MP rear-facing autofocus camera with 1080p HDand4kvideo
Microphone: Built-in, integrated
Operating System: Windows 11 Home
Key Board &
Accessories: Detachable keyboard with Pen and battery charger Warranty:1 year parts
1 year service
2. Computer Systems (CPU): Quantity - 7 Nos
Form Factor: Small, Tower (Note: Ultra Small size and All-in-One is not acceptable) Processor: 11th Generation lntel Core i7
RAM:32 GB, DDR4, minimum 2666 MHz speed Note: Should be 2 sticks of 16 GB
Storage: 256 GB M.2 PCIe NVMe
Optical Drive: Internal DVD Writer / Rewrite Video: NVIDIA or AMD 2GB dedicated graphics, HDMI / DisplayPort 24" Flat Screen, HDMI / DisplayPort + Compatible cable Note: Please specify on the quotation, the port(s) on the monitor and the included Monitor:
type of video cable.
At least one port must be compatible with the provided video cable and port of the video card
Network: 1000 Mbps / Gigabit Ethernet
USB 3.0 (2 front / 4 rear)
Input / Output
Gigabit Ethernet
Ports:
Audio Jack (Front Audio Combo Jack)
Keyboard: USB Wired QWERTY Keyboard (EN-US) Mouse: USB Wired Optical Scroll Mouse + Mouse Pad Operating System: Genuine Windows 10 Pro 64-bit
Other Software: Genuine Microsoft Office Professional 2019 64-bit Warranty:1 year parts
1 year service
3. Monitors: Quantity - 6 Nos
Size: 24"
Resolution: 1920 x 1080 at 60 Hz
Aspect Ratio: 16:09
Backlight: LED
Ports: 1 x DisplayPort, 1 x HDMI Port, 1 x USB 3.0 upstream, 2xUSB3.0downstream
Adjustment: Pivot, tilt, swivel, height
Monitor: Quantity - 1 No
Size: 32"
Resolution: 2560 x 1440 at 60 Hz
Aspect Ratio: 16:09
Backlight: LED
Ports: 1 x DisplayPort, 1 x HDMI Port, 1 x USB 3.0 upstream, 2xUSB3.0downstream
Adjustment: Pivot, tilt, swivel, height
4. Printer – Color Laser Jet: Quantity - 1 No
Print Type: Color Laser
Print Speed: 30 ppm Print Resolution: 600 x 600 dpi
Connectivity: Ethernet, USB, WiFi
Paper Sizes: A4, A5
Paper Types: Plain, Envelope
Duplex Print: Automatic
Warranty:1 year parts
1 year service
5. Desktop IP Phone: Quantity - 5 Nos
Network Interface: Auto-sense 10/100 Mbps Ethernet ports, Integrated PoEDisplay: 132 x 48 Backlit LCD
Headset Jack: RJ9 headset jack
QoS: Layer 2 (802.1Q, 802.1P) and Layer 3 (ToS, DiffServ, MPLS) QoSWall Mountable: Yes
Speakerphone: Full-duplex HD speakerphone
PBX compatibility: Must be compatible with GrandstreamIP PBX
Quantity Required : 23 Unit/Units
Shipping Terms : CIF
Destination Port : Maldives, Maldives
Payment Terms : LC/TT
Looking for suppliers from : Worldwide
Contact : Imran Shareef
Buyer is interested to receive quotations for the following RFQ -
Produt Name : It Base Items, IT Office Items, Cams, Security Equipments
Specifications :
1 Supply of Opterna 12 Core Single Mode OS2 Indoor / Outdoor fiber
optical cable 1 Lsm.
2 Supply of Opterna 19" Unloaded 1U Sliding Patch Panel 12/24 SC
Simplex (LC Duplex) Port- Black with Splice Tray - Unloaded 2 Nos.
3 Supply of Opterna Singlemode Simplex SC/APC Adaptor, Green 24 Nos.
4 Supply of Opterna Singlemode Simplex SC/APC Fiber Optic Pigtail,
Green 24 Nos.
5 Supply of Single Mode SC-SC APC fiber patch cord 3 meter 2 Nos.
6 Fiber Optical Cable Splicing, 6cm Clear Splice Protector Sleeve and VFL Laser Testing 24 Nos.
7 1 x 12 Core fiber optic cable laying from Landmark Tower Nearest
Etisalat floor level IDF room to 33rd Floor office server rack. 1 Lsm.
8 OTDR Testing and Soft Copy Report for Singlemode Fiber cable (Core A to B) 12 Core.
9 Supply of Opterna 42U x 800(W) x 1000(D) - Rack with Rear
Perforated Door, Fan, Vertical Cable Managers, Fixed shelf,
Front Glass door with lock, Rear Perforated door with lock. 1 Nos.
10 Supply of Opterna 6 Way Horizontal UK Type PDU 2 Nos.
11 Supply of DS-7608NI-K2/8P 8-ch 1U 08 PoE 4K NVR, 2 SATA
interfaces, Hikvision 1 Nos.
12 Supply of DS-2CD1143G0-I Value Series 4MP Dome 2.8mm Fixed
Lens Network Camera, 30 Mtr IR - Hikvision 5 Nos.
13 Supply of DS-2CD1743G0-IZ Pro Series 4 MP WDR Motorized
Varifocal Dome Network Camera, 30 Mtr IR - Hikvision 1 Nos.
14 Supply of 6TB WD Purple Surveillance Hard Disk SATA for NVR (Storage Calculated for 60 Days with 6 Cameras, at 2560*1440/4MP, H.265, 15fps, No RAID and No spare) 2 Nos.
15 Testing, Camera and NVR Configuration, commissioning and mobile view free application. (without any documentation & MCC approval) 1 Lsm.
16 Supply of Ubiquiti Gateway Professional (1) 10G SFP+ and (1) GbE WAN port, (1) 10G SFP+ and (1) GbE LAN port. UXG-Pro 1 Nos.
17 Supply of Ubiquiti Switch Pro 48 PoE. Layer 3, PoE switch with (48) GbE RJ45 ports, including (40) PoE+ ports and (8) PoE++ ports, and (4) 10G SFP+ ports. USW-Pro-48-PoE 3 Nos.
18 Supply of Ubiquit Cloud Key Gen2 Plus, Compact, desk or rackmountable* UniFi OS Console with a pre-installed hard drive. UCK-G2-PLUS 1 Nos.
19 Supply of CloudKey G2 or CloudKey G2 Plus into a 19" rack with the Cloud Key G2 Rack Mount Accessory. CKG2-RM 1 Nos.
20 Supply of Unifi Access Point WiFi 6 Long-Range Access Point.
Model: U6-LR 10 Nos.
21 Supply of Ubiquiti 10 Gbps Multi-Mode Optical Module UF-MM-10G 8 Nos.
22 Supply of Multi Mode OM4 LC-LC Fiber Patch Cord, 2 Mtr 4 Nos.
23 Professional Services for Ubiquiti POE Switch, Access Point and Cloud Control One Time Configuration without any configuration documentation 1 Nos.
24 Professional Services for ATS and UPS installation and setup (without any network configuration) 1 Lsm.
25 Supply of Pro Series DS-K1T671MF Pro Face Access Terminal, 7- inch LCD touch screen, 2 MP wide angle lens, Face recognition distance: 0.3 m to 3 m, Multiple authentication modes: Face
Recognition / Fingerprint / Card - Hikvision 2 Nos.
26 Supply of 600 Lbs Single Electro Magnetic Lock and Related Bracket or Drop Bolt Lock for Glass Door 11 Nos.
27 Supply of 12V - 5 Amp Enclosure Switching Power Supply Box and 12V - 7Ah Sealed Rechargeable Battery. 11 Nos.
28 Supply of Emergency Glass Break 11 Nos.
29 Supply of No-Touch IR Exit Button (Without Remote) 10 Nos.
30 Supply of Metalic Push Button for Reception Desk 1 Nos.
31 Supply of wireless remote controller for Main Entrance door and CEO
Office 2 Nos.
32 Supply of M1 PVC Card, White 50 Nos.
33 Internal cabling for Power Supply, Card reader, Push button, Glass
break and Magnetic lock without any containment 11 Lsm.
34 Installation & termination of Power Supply, card reader, Push button,
Glass break and Magnetic lock without any integration 11 Lsm.
35 One Time - HikCentral Access Control and Time Attendance Software
installation, Configura
Please provide a quotation to the following requirement from importer -
Product Name: Computer Server
Specifications :
HPE ProLiant DL380 Gen10 Plus 8SFF NC Configure-to-order Server P05172-B21
3 HPE DL380 Gen10 ICX CTO Mod-X 8SFF P05172-B21 B19
2 6 Intel Xeon-Gold 6326 2.9GHz 16-core 185W Processor for HPE P36932-B21 3
6 Factory Integrated P36932-B21 0D1 4
5 P06035-B21
HPE 64GB (1x64GB) Dual Rank x4 DDR4-3200 CAS-22-22-22
48 Registered Smart Memory Kit
48 Factory Integrated P06035-B21 0D1 6
7 P40430-B21
HPE 300GB SAS 12G Mission Critical 10K SFF BC 3-year Warranty
6 Multi Vendor HDD
6 Factory Integrated P40430-B21 0D1 8
12 HPE 1.92TB SATA 6G Read Intensive SFF BC Multi Vendor SSD P40499-B21 9
12 Factory Integrated P40499-B21 0D1 10
3 HPE DL38X Gen10 Plus x8/x16/x8 Secondary Riser Kit P14587-B21 11
3 Factory Integrated P14587-B21 0D1 12
13 P26262-B21
Broadcom BCM57414 Ethernet 10/25Gb 2-port SFP28 Adapter for
6 HPE
6 Factory Integrated P26262-B21 0D1 14
3 HPE ProLiant DL380 Gen10 Plus x8/x16/x8 Primary FIO Riser Kit P37038-B21 15
3 HPE SN1610Q 32Gb 2-port Fibre Channel Host Bus Adapter R2E09A 16
3 Factory Integrated R2E09A 0D1 17
3 HPE NS204i-p x2 Lanes NVMe PCIe3 x8 OS Boot Device P12965-B21 18
3 Factory Integrated P12965-B21 0D1 19
3 HPE 96W Smart Storage Lithium-ion Battery with 145mm Cable Kit P01366-B21 20
3 Factory Integrated P01366-B21 0D1 21
22 P26279-B21
Broadcom MegaRAID MR416i-a x16 Lanes 4GB Cache NVMe/SAS
3 12G Controller for HPE Gen10 Plus
3 Factory Integrated P26279-B21 0D1 23
3 Intel I350-T4 Ethernet 1Gb 4-port BASE-T OCP3 Adapter for HPE P08449-B21 24
3 Factory Integrated P08449-B21 0D1 25
12 HPE BladeSystem c-Class 10Gb SFP+ SR Transceiver 455883-B21 26
12 Factory Integrated 455883-B21 0D1 27
3 HPE DL38X Gen10 Plus Maximum Performance Fan Kit P14608-B21 28
3 Factory Integrated P14608-B21 0D1 29
30 P38995-B21
HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply
6 Kit
6 Factory Integrated P38995-B21 0D1 31
32 BD505A
HPE iLO Advanced 1-server License with 3yr Support on iLO
3 Licensed Features
3 Factory Integrated BD505A 0D1 33
34 P45916-B21
Microsoft Windows Server 2022 16-core Datacenter FIO Not Pre3 installed en/fr/it/de/es/nl/pt SW
35 P46212-B21
Microsoft Windows Server 2022 16-core DC Add Lic
3 en/cs/de/es/fr/it/nl/pl/pt/ru/sv/ko/ja/xc SW
3 Factory Integrated P46212-B21 0D1 36
3 HPE ProLiant DL38x 8SFF SAS/SATA Tri-Mode Cable Kit P55467-B21 37
3 Factory Integrated P55467-B21 0D1 38
3 HPE Gen10 2U Bezel Kit 867809-B21 39
3 Factory Integrated 867809-B21 0D1 40
3 HPE Bezel Lock Kit 875519-B21 41
3 Factory Integrated 875519-B21 0D1 42
3 HPE Trusted Platform Module 2.0 Gen10 Plus Black Rivets Kit P13771-B21 43
3 Factory Integrated P13771-B21 0D1 44
3 HPE DL38X Gen10 Plus 2U SFF Easy Install Rail Kit P22018-B21 45
3 Factory Integrated P22018-B21 0D1 46
6 HPE ProLiant DL380 Gen10 Plus High Performance Heat Sink Kit P27095-B21 47
6 Factory Integrated P27095-B21 0D1 48
3 HPE ProLiant Door/dock Medium Logistic Service AC114A 49
1 HPE Installation SVC HA113A1 50
3 HPE 300 Series Installation Service HA113A1 5A6 51
1 HPE 5 Y Tech Care Essential with Defective Media Retention Service HU4A7A3 52
3 HPE Proliant DL380 Gen10+ Support HU4A7A3 ZSB 53
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Saudi Arabia
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Mohamed Alnady
Please provide a quotation to the following requirement from importer -
Product Name: Voltage Regulator
Specifications:
Details :
1. set Of 10mva(200a) Open Delta Voltage Regulator Unit , 33 Kv With
± 10% Regulation, Complete With
Control Panel And All Accessories As Mentioned In Our Requirements set 1
Technical Specifications
1. scope
This Standard Specifies The Requirements For Automatic Voltage Regulators For Use On Ohl 33kv Electricity Distribution Network.
2. system Parameters
(a) nominal Voltage - 33kv
(b) system Highest Voltage - 36kv
(c) system Frequency - 50hz
(d) number Of Phases - 3
(e) method Of Earthing - Resistance
(f) system Fault Current - 25 Ka
3. service Conditions
(a) annual Average Ambient Temperature: 30oc
(b) maximum Ambient Temperature: 50oc
(c) maximum Relative Humidity: 90%
(d) environmental Conditions: Tropical Climate.
(e) operational Altitude: From 400 M Under Msl To 1400m Above Msl
4. standard Regulator Operating Condition
(a) the Temperature Rise Of Top Oil At Cmr Above Specified Design Ambient Shall Be 50oc.
(b) the Temperature Rise Of Windings At Cmr Above Specified Design Ambient Temp Shall Be 55oc.
5. application Standard
This Standard Makes Reference To The Following Documents Or Any Equivalent International Standards:
• ieee Std C57.15 Standard Requirements, Terminology, And Test Code For
• step-voltage Regulators.
• iec 60296 Insulating Oil For Transformers And Switchgears.
• iec 60076 Power Transformers.
• bsi Bs 381c Specification For Colors For Identification, Coding, And Special Purposes.
• bsi Bs En Iso 1461- Hot Dip Galvanized Coatings On Iron And Steel Articles.
• bs 2562 Specifications For Cable Boxes For Transformers And Reactors.
• bs 3692 Iso Metric Precision Hexagonal Bolts, Screws& Nuts.
• bs 4190 Iso Metric Black Hexagonal Bolts, Screws And Nuts.
• bsi Bs 7079 Surface Finish Of Blast Cleaned Steel For Painting.
• iec 60529 Specification For Degree Of Protection Provided By Enclosures.
• bs 5493 Code Of Practice For Protective Coating Of Iron And Steel Structures Against Corrosion.
• iec 60076-10 Method Of Measurement Of Transformer And Reactor Sound Levels.
• iec 60076-7 Loading Guide For Oil Immersed Power Transformers.
As Per Moq
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Aqaba, Jordan
Payment Terms : LC/TT
Looking for suppliers from : Worldwide
Contact : Ramzi Saba
Please provide a quotation to the following requirement from importer -
Product Name: GI Fittings
Specifications :
Item Description Qty Unit
1 GI Coupling 1/2" Weldable 1,500 Ea (10pcs/Bag)
2 GI Coupling 3/4" Weldable 1,500 Ea (10pcs/Bag)
3 Weldable 1" Coupling GI 1,000 Ea (10pcs/Bag)
4 Weldable 2" Coupling GI 500 Ea (5pcs/Bag)
5 GI Union Joint 1/2" 200 Ea (10pcs/Bag)
6 GI Union Joint 3/4" 1,000 Ea (10pcs/Bag)
7 GI Union Joint 1" 1,000 Ea (10pcs/Bag)
8 GI Union Joint 2" 500 Ea (5pcs/Bag)
9 GI Nipple 1/2" 25,000 Ea (10pcs/Bag)
10 GI Nipple 3/4" 33,000 Ea (10pcs/Bag)
11 GI Nipple 1" 5,00 Ea (10pcs/Bag)
12 GI Nipple 2" 1,000 Ea (5pcs/Bag)
13 GI Reducer 3/4" x 1/2" 20,000 Ea (10pcs/Bag)
14 GI Reducer 1" x 1/2" 1,000 Ea (10pcs/Bag)
15 GI Reducer 1" x 3/4" 6,000 Ea (10pcs/Bag)
16 GI Reducer 2" x 3/4" 200 Ea (5pcs/Bag)
17 GI Reducer 2" x 1" 200 Ea (5pcs/Bag)
18 GI Tee 1/2" 200 Ea (10pcs/Bag)
19 GI Tee 3/4" 4,000 Ea (10pcs/Bag)
20 GI Tee 1" 500 Ea (10pcs/Bag)
21 GI Tee 2" 100 Ea (5pcs/Bag)
22 GI Tee Reducer 3/4" x 1/2" x 3/4" 4,000 Ea (10pcs/Bag)
23 GI Tee Reducer 1" x 1/2" x 1" 1,000 Ea (10pcs/Bag)
24 GI Cross 3/4" 500 Ea (10pcs/Bag)
25 GI Cross 1" 500 Ea (10pcs/Bag)
26 GI Elbow 1/2" 1000 Ea (10pcs/Bag)
27 GI Elbow 3/4" 15,000 Ea (10pcs/Bag)
28 GI Elbow 1" 3,500 Ea (10pcs/Bag)
29 GI Elbow 2" 500 Ea (5pcs/Bag)
30 GI Reducer Elbow 1" x 1/2" 100 Ea (10pcs/Bag)
31 GI Reducer Elbow 3/4" x 1/2" 250 Ea (10pcs/Bag)
32 GI plug 1/2" with a hole 4,500 Ea (10pcs/Bag)
33 GI plug 3/4" with a hole 1,000 Ea (10pcs/Bag)
34 GI plug 1" with a hole 1,000 Ea (10pcs/Bag)
35 GI plug 2" with a hole 500 Ea (5pcs/Bag)
Galvanized Iron Fittings specifications
1.1 Ambient Conditions
All Fittings, materials and Equipment shall be in every respect suitable for storage, installation, use and operation in the conditions of temperature, humidity and The PH and water quality appertaining in Jordan.
The atmospheric temperature in Jordan varies between -10°C and 50 °C.
1.2 Potable Water Certification
All Fittings and materials shall be certified for potable water use, and all fittings and materials should be certified as safe for transporting potable water by an independent testing laboratory. All material in contact with or likely to come into contact with water for public shall introduced with the requirements of BS 6920 (suitability for non metallic products for use in contact with drinking water) or any equivalent standard as well as the Jordanian standard (JS 286/2008) and the requirements of EN 15664 ( influence of metallic materials on water intended for human consumption ) or any equivalent standard and the World Health Organization standard (WHO), and whenever the regulation is changed it is the supplier responsibility to ensure conformity with any new requirements..
1.3 Toxic Materials
Fittings and components, including their protective coatings and joint materials, that will or may come into contact with potable water shall not constitute a toxic hazard, shall not support microbial growth, shall not cause taste or odour, cloudiness or discoloration of the water and shall contain no ingredients that may migrate into water in amounts that are considered to be toxic or otherwise dangerous for health Non toxicity certificate should be provided.
1.4 Third Party Witness
The supplier must submit at least 3 different international third party companies where Miyahuna will choose one of them.
The supplier shall furnish an original certificate from a third party inspection agency showing all test resu
Quantity Required : MOQ
Shipping Terms : CFR
Destination Port : Aqaba, Jordan
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Ramzi Saba
