SS rings
Investment castings
Investment casting product.
Stainless steel u channels
Stainless steel u channel, stainless steel channel
Castings
Investment casting, S.S. Casting
Ferro silicon magnesium, ferro silicon, inoculants, steel cut wire shots, steel grits, flake graphite.
Steel cold rolling complex, castings and forgings, heat exchangers
Steel castings
Grinding ball strength class (hrc) 50 and above, and size 120 mm, material steel and cast iron
Steel sheet different size and structure
Stainless steel rough castings, replacement parts for cement plant machineries
Casting Parts
Used Rail Scrap Stainless Steel Scrap Cast Iron Scrap
Furniture & accessories : wrought iron, stone casting, stone inlay
The buyer would like to receive quotations for - Product Name: Steel Billets B500B/3SP Specifications: Qty : 200,000 MT monthly Grade: B500B/3SP Process of manufacture: process route: EAF/BOF---LRF---CCM. Input raw material: Hot DRI/HBI + Scrap + Internal virgin scrap(as and when required). Killing practice: Silicon killed/Aluminum killed. Metallurgical requirements: Color code: As agreed before contract Range: Min% - Max% C 0.19 - 0.22 , Mn 0.65 - 0.80 , Si 0.15 0.30 , S 0.20 , P 0.035 , Cr 0.10 , Ni 0.10 , Cu 0.05 , Sn 0.015 , B 0.0008 , As 0.015 , Sb 0.01 , N2ppm 70 CE : 0.48 max (Aim 0.31-0.36) CE= C+ Mn/6+ (Cr +Mo +V) /5+(Cu +Ni) /15 Permissible variation in analysis for individual chemical elements will be as per ASTM A29. Internal soundness: - One macros sample shall be checked for every 3 heats per sequence. - Billet macrostructure should be appropriate to produce rolled product as per C2S2R2 ASTM E381. - Free from harmful subsurface defects like blow / pin holes, and cracks which can affect the end product quality. - Central looseness / piping: 4mm max. - No visible defect (piping, pin holes, crack) should be on the cross section of both ends. Surface Quality: Billet shall be supplied free from harmful surface defects like longitudinal/transverse cracks, pinholes, slag patches, mechanical mark etc., which can affect surface quality of the end products, Mechanical/Scratch marks with a maximum depth of Less Than = 1mm depth are allowed, defect more than 1mm should be removed by smooth grinding and width of grinding and width of grinding and width of grinding and width of grinding should be at least 6 times of depth. Size and dimensional tolerances: Section in mm: 150*150 - 160*160 D1-D2 in mm (max) 10 Side Tol in mm +/-4 Length in meter 12 Length Tol in mm +/-50 Bulging 4 mm max Bend in mm 5mm/m & 60mm in entire length, no end bend allowed Ends Cut deviation 5mm max. General : - Billet ends will be Gas cut which should be straight. - Burrs if present should not be more than 5 mm of thickness and 25 mm width - Billet should be from current production and rust if present should be superficial Certification: The test certification will contain - Supply condition - Process of manufacturing - Steel grade - Heat number(cast number) , length, no of pieces and weight - Chemical composition - Declaration for free from radioactivity Identification: - Heat no./grade/length will be painted on one end of each billet with a specific color code Please let us know if there is any additional information you require from our end to proceed with this inquiry. NO Parameters Unit Specs 1 T.Fe % 65.00 Min 2 SiO2 % 3 Al2O3 % 6.00 Max 4 CaO % 0.65 Typical 5 MgO % 0.04 Typical 6 P % 0.06 Max 7 S % 0.0040 Max 12 Moisture % 2.50 Max 21 Less Than 5.0 mm % 1.0 Max 22 T.I.(+6.3mm) % 94.0 Min 23 A.I.(-0.5mm) % 3.0 Max 24 CCS Kg/P 280 Min 26 Porosity % 23% Min 28 Mean Size mm 13 mm Quantity Required : 200000 Metric Ton/Metric Tons Shipping Terms : CIF Destination Port : Oman Payment Terms : L/C Looking for suppliers from : Indonesia Contact : Soheil Damaj
MS and SS material for fabrication.
Iso 1161 Corner Castings
Casting, MS and SS
