Please provide a quotation to the following requirement from importer - Product : Sheep Ghee & Butter Specifications: Sheep Butter Packing 20-25kg Containers. Monthly Shipments 2/5 Tons Of Each Item Strictly To Bintusa Terms Monzier For Gk Sheep Ghee Specifications : 1. Appearance: Golden-yellow To Deep Yellow, Clear, And Grainy When Solidified. 2. Flavor/aroma: Rich, Nutty, Slightly Caramelized. 3. Moisture Content: Less Than 0.3% 4. Fat Content: Min. 99.5% Milk Fat. 5. Free Fatty Acids (ffa): Less Than 0.3% 6. Peroxide Value: Less Than 1 Meq/kg. 7. Smoke Point: ~250°c (482°f). 8. Shelf Life: 12-18 Months. 9. Packaging 20-25 Kg Plastic Containers Sheep Butter Specifications 1. Appearance: Pale Yellow To Creamy White, Smooth, Spreadable. 2. Flavor/aroma: Rich, Creamy, Mildly Tangy. 3. Moisture Content: 16-18% 4. Fat Content: 82-85% Milk Fat. 5. Salt Content: Available In Salted And Unsalted. 6. Microbiological Standards: -total Plate Count: Less Than 10,000 Cfu/g -yeast And Mold: Less Than 50 Cfu/g -coliforms: Less Than 10 Cfu/g 7. Shelf Life: 3-6 Months (refrigerated). 8. Packaging: 20-25kg Plastic Containers Origin : Any Political Acceptable Origin Please Quote Best Offer With All Details. We May Request A 20kg Shipment Of Ach, Ghee & Butter By Dhl Initially To Check Quality As Stated In Our Required Specification Quantity : 2-5 Tons Every Month For Each Item Quantity Required : 2 - 5 Ton/Tons Monthly Shipping Terms : CIF Destination Port : Germany Payment Terms : Bank Transfer Looking for suppliers from : Worldwide Contact : Manoj Khemlani
The buyer would like to receive quotations for - Product : Palm Fatty Acid Distillate (PFAD) Quantity:• Trial Order: 1,000MT of Palm Fatty Acid Distillate (PFAD) as below annexure • 100% Letter of Credit at sight Monthly Order and Payment Terms • Monthly Order: 20,000MT of Palm Fatty Acid Distillate (PFAD) as below annexure Procedures 1. The Buyer issues LOI 2. The seller issues FCO. 3. Buyer confirms FCO and procedure and issue ICPO (Irrevocable Corporate Purchase Order) 4. Seller issues Draft Contract (open for amendment) to the buyer. Buyer signs, seal and returns the draft contract (with TSA) to the seller for final endorsement. Seller gives partial proof of products. a) Commitment to Supply b) Pre-Delivery Schedule c) Certificate of Origin (House) 5. Within Seven (7) banking days, the buyer’s bank issues Irrevocable & Non-Transferable DLC(MT103) Equivalent according to the seller’s fiduciary bank verbiage to the seller’s nominated fiduciary Offshore bank for the first month of shipment. 6. The Supplier-Seller's fiduciary bank confirms the Buyer's bank instrument and issues the full POP documents within 10 working days and delivers it from bank to bank or via email. 7. A. Copy of CPA to transport the product to the loading port a) Copy of vessel questionnaire (88) b) Copy of the bill of lading c) SGS or CIQ report at loading port d) Certificate of Origin e) Commercial Invoice Packaging Terms : 20ft/18~20mt Quantity Required : 20000 Metric Ton/Metric Tons Shipping Terms : CIF Destination Port : Busan Usd 570/Mt, South Korea (Republic Of Korea) Payment Terms : 100% Letter of Credit at sight Looking for suppliers from : Worldwide Contact : Seo Hyun-Ki
Buyer is interested to receive quotations for the following RFQ - Product Name: Coconut Fatty Acid Distillate Specifications : Description : CFAD (Coconut Fatty Acid Distillate)/PKFAD(Palm kernel Fatty Acid Distillate) 1. Moisture + impurity: 1% Max 2. Saponification Value: 240-285 mg KOH/g 3. Iodine Value:8-18(g I2/100g) 4. Total Fatty Matter: 97% Min 5. Content of Carbon C12-14 by:60% Min 6. Unsaponifiable Matter : 3%Max 7. Sulfur Content: 100ppm Max By Method Of ASTM D 5453 or EN ISO 20846:2011 8. FFA (Free Fatty Acid): 50% Min 9. FAME (Fatty Acid Methyl Ester):1%Max Quantity Required : 2000 - 3000 Metric Ton/Metric Tons Monthly Shipping Terms : CIF Destination Port : Xiamen, China Payment Terms : L/C Looking for suppliers from : Indonesia Contact : Rohan
Buyer is interested to receive quotations for the following RFQ - Product Name: RBD Palm Oil Specifications: For human consumption 1. THE PRODUCT: RBD Palm Oil as per the below specifications: S. No. ITEMS Values & Limits METHOD REFERENCE 1 Moisture& Impurities 0.10% MAX CAM-13A AOCS Ca2d-38 2 Free Fatty ACID as Oleic ACID 0.15% MAX CAM-02 AOCS Ca5a-40 3 Peroxide Value 6.0 MEQ/KG CAM-04 OCS Cd8-53 4. Color 5.25” Lovibond cell RED 4.5 MAX CAM-29 AOCS Cc 13b-45 5 SMP”C 36-40 CAM-01 AOCS Cc 3.25 6 Mineral Oil test NEGATIVE CAM-10 AOCS 28.133 1990 7 Unsaponifiable Matter Less Than 1.5% CAM-26 AOCS Ca 6a-40 2. 2 REQUIREMENTS: a) The Seller must meet the international standard set by phytosanitary inspectors with the SGS inspection report. b) The Seller guarantees that each shipment will receive an SGS inspection report regarding the product's weight, quantity, and quality at the loading Port. All inspections shall be as per ICC Rules and as per SGS standards and specifications given above. 3. QUANTITY OF PRODUCT During the year 2024, the quantities in Metric Tons (MT) will be as follows: Month Quantity MT September 7,000 October 10,000 November 12,500 – 21,000 December 12,500 – 21,000 6. PAYMENT TERMS Payment for each shipment will be 100% LC at Sight after the Buyer shall receive the documents listed below: a. Seller’s signed Commercial Invoice (3 Original Sets) b. Packing List (3 Original Sets) c. Certificate of Origin Form D issued by Chamber of Commerce. d. The Seller will bear the cost of the SGS report at the Loading Port, and the Buyer will bear the cost of the SGS report at the Destination Port. Total Quantity To be determined monthly. 4 PACKING & DELIVERY Bulk tankers shall deliver RBD Palm Oil to Port Qasim, Karachi, Pakistan. 5 PRICE TO BE QUOTED The price Per Ton for the product is to be Quoted US$ Per Metric Tons CFR, Port Qasim Karachi. The buyer will pay the insurance charges for the product. Quantity Required : 7000 - 21000 Metric Ton/Metric Tons Shipping Terms : CFR Destination Port : Karachi, Pakistan Payment Terms : 100% LC at Sight Looking for suppliers from : Malaysia, Indonesia Contact : Ahsan Rahim
Please quote for the following wholesale product requirement - Product Name: Wood Chips Specifications : For Particleboard To China Type Of Wood: Any Wood Is Ok. (miscellaneous Wood/with Bark Are Ok Process The Whole Tree With The Bark. Segments With Diameter Less Than 3 Cm Account For No More Than 5%. A Diameter Of More Than 3 Cm, A Length Of 4-7 Cm A Sawdust Content Of No More Than 5%. Resolutely Eliminate Unusable Impurities, Such As Metal, Stone, Sand And Other Impurities. If The Quantity Of Above Content Shall Be More Than 1% Of Total Shipped Quantity, The Delivered Quantity Shall Be Calculated To Be Deducted As Much As The Quantity Exceeding The 1% Of Total Shipped Quantity. Please Tell Me The Cif Price From Your Port To Weifang Port, Tianjin Port In China After You Set Up 2% Performance Bond, The Chinese Side Will Issue The L/C. Quantity Weifang Port 15,000 BDMT/Vessel Two Vessels In A Month 30,000BDMT/ Month Tianjin Port 20,000 BDMT/ Vessel Three Vessels In 2 Months above 30,000 BDMT/ month Quantity Required : 15000 - 20000 Metric Ton/Metric Tons Monthly Shipping Terms : CIF Destination Port : Weifang Port, China, Tianjin Port, China Payment Terms : L/C At Sight Looking for suppliers from : Asia Target Price : USD 90 per Metric Ton/Metric Tons Contact : Yano Yudai
The buyer would like to receive quotations for - Product Name: Wheat Bran Specifications : A. Commodity: Wheat Bran B. Origin: USA, Brazil, South Africa, or any oTher country C. Total Quantity: 1,200,150 MT D. Trial Quantity: 150 MT, For Preliminary Stage Only That We Can Check The Quality And Rate E. Monthly Quantity: 100,000 MT F. Contract Period: 13 Month G. Packing: PP Bags H. Delivery Time: 14 Days Destination Free Period At The Destination Port I. Production And Expiry Dates, Country Of Origin To Be Marked On Each Bag And Invice Must Cirtify This Or Else Seller To Bear The Penalty From Customs. J. Price: TBD USD/MT. K. Payment terms: 100% TT/Cash against delivery, OR, 100% LC/DLC/SBLC non-transferable, non-devisable, irrevocable paid for each shipment against original Bill Of Ladding for that shipment, L. Destination: CFR, Salalah Port, Oman, M. Certification: SGS, N. Documents: Commercial Invoice, Certificate Of Origin, Phytosanitary Certificate, Packing List, Fumigation Certificate. O. Shipping Line Will Be On The Suppliers Account, P. Technical Specifications (The Specifications Strictly To Be Met And In Case Of Any Deviation We Reserve The Right To Reject The Goods): - Moisture: 10% Max - Protein: 15% Min - Fiber: 7% Max - ADF: 14% Max - NDF: 43% Max - FAT: 3% Min - ASH: 4% Max Quantity Required : 150 Metric Ton/Metric Tons Shipping Terms : CFR Destination Port : Salalah Port, Oman Payment Terms : 100% TT/Cash against delivery, OR, 100% LC/DLC/SBLC non-transferable, non-devisable, irrevocable paid for each shipment against original Bill Of Ladding for that shipment, Looking for suppliers from : Worldwide Contact : Yusuf Rousan
The buyer would like to receive quotations for - Product Name: Cooking Oil Specifications : Type: Refined Soybean Oil 1) Order Quantity # 3000MT ( +/- 5 %) x12 Months. 2) Origin of # Turkey , USA, Tanzania, Brazil, Malaysia 3) Port of Loading # Any port of Turkey , Tanzania, Brazil , Malaysia .Russia. 4) Port of Destination # Chittagong Port, Bangladesh. 5) Inspection # Inspection by SGS 6) Insurance # 110% Issue Of Seller 7) Performance Bond # Seller Issue a 2% PB when get the LC Instruments Bank with in 5 Days for Buyer Bank 8) Proof of Product # Seller provide Proof of Product After SPA Contract Sign Before Open LC ( Bank to Bank) 9) Past Performance # Seller Provide A Past Performance When Buyer Issue A LC draft copy 10) Pre Shipment Inspection # Before Shipment Buyer Wants To Pre Inspection When Goods Are Ready To Shipped Need Invitation Letter For Inspection 11) Added Vitamin A # 20mg to 30mg Per Liter Packaging Terms : 2L Pet Bottle With Private Label Quantity Required : 3000 Metric Ton/Metric Tons Shipping Terms : CIF Destination Port : Chittagong Port, Payment Terms : 100% Irrevocable, Non-Transferable & Divisible L/C At Sight Looking for suppliers from : United States, Tanzania, Turkey, Brazil, Malaysia Contact : Feroze Ahmed
The buyer would like to receive quotations for - Product: EN590 Diesel Specifications: Origin: Any non sanctioned country Qty: Trial quantity: 100,000mt Monthly quantity: 100,000mt Contract period: 12 months Specifications: 10ppm Sample Procedure: 1. Buyer issues ICPO containing the Seller's working procedure with banking details and scanned copy of Buyer's passport along with verifiable CPA documents for Seller’s due diligence. 2. After a successful verification of the Buyer's CPA, the Seller issues commercial invoice of the product in tanks at the port; Buyer signs and returns back Commercial Invoice to Seller. 3. Buyer visits Seller’s tank storage provider 4. Seller issues to Buyer PPOP listed below: a. GPS Coordinates-Tank Storage Receipt (TSR) b. Injection Report (IR) c. Unconditional Dip Test Authorization letter (UDTA) d. Authorization to Sell (ATS) e. Fresh SGS Report in Seller Tank (Not older than 48 hrs) f. Authorization to Verify the product in Seller's Tank (ATV) g. Notice of Readiness (NOR). Note: UDTA, ATS and ATV must be in Buyer’s name. 5. Seller issues NCNDA/IMFPA to all intermediaries involved in the transaction and to Buyer for signing. 6. Optional: Buyer arranges Dip Test by SGS or equivalent on Buyer’s expenses. 7. Upon successful Dip Test result in Seller’s tanks, or after acceptance of fresh SGS, the product will immediately be injected into Buyer's vessel. 8. Buyer makes payment for the product via MT103 and Seller transfers Title Ownership to Buyer and all remaining documents 9. Seller issues 12 Months Contract with same procedures for Buyer’s review and acceptance. Quantity Required : 100000 Metric Ton/Metric Tons Shipping Terms : FOB Destination Port : Other-Not Shown Payment Terms : MT103/TT Looking for suppliers from : Worldwide Contact : Yasu
The buyer would like to receive quotations for - Product Name: Petroleum Products Specifications: Product: EN590, Jet A1, D6 Origin: Non Russian Shipping: FOB Transfer port: Rotterdam, Houston, Singapore, Fujairah Transfer method: Tank take over Contract period: 12 months Payment method: MT103/TT - EN590 Trial quantity: 300,000mt Monthly quantity: 400,000mt Gross Price: Best price Commission: $10 - Jet A1 Trial quantity: 5,000,000bbl Monthly quantity: 5,000,000bbl Gross Price: Best price Commission: $3 - D6 Trial quantity: 500,000,000gal Monthly quantity: 500,000,000gal Gross Price: Best price Commission: $0.03 Potential Procedure: Contract period: 12 months Potential Procedure: 1. Buyer issues ICPO addressed to the seller with company certificate and POF (BCL). 2. Seller Issues Commercial Invoice for the product in the tanks to be signed by the buyer. 3. Buyer signs the Commercial Invoice and sends back to Seller. The seller and intermediaries signs the IMFPA. 4. Seller issues the below documents a. Unconditional Dip Test Authorisation b. Statement of product availability c. Q&Q Report d. Tank Storage Receipt (TSR) with tank number, GPS coordinates and Tank Location. e. Authorisation to Verify (ATV) physical verification. f. Injection Report. g. Certificate of Origin. 5. Buyer verifies above and conducts Dip Test into Sellers tank (At Buyers Expense). 6. Within 48 hours of successful Dip Test, Buyer extends the Sellers Tank and then moves to make full payment of the Commercial Invoice within 5 banking days. 7. After Seller receives full payment, Seller gives title to end buyer and end buyer takes over the Sellers Tank. The seller pays commission according to the signed IMFPA. Quantity Required : MOQ Shipping Terms : FOB Destination Port : Rotterdam, Houston, Singapore, Fujairah, Other-Not Shown Payment Terms : MT103/TT Looking for suppliers from : Worldwide Contact : Yasu
Buyer is interested to receive quotations for the following RFQ - Product: H C Ferro Chrome Specifications: Ferro Titanium titanium 30% Min carbon 0.2%max form 5 To 50mm Lumps High Carbon Ferro Manganese manganese 60% Min carbon 8% Max form 5 To 50mm Lumps Pure Nickel nickel 99% Min carbon 0.1% Max form 2" X 2", 4" X 4" Cathodes Low Carbon Ferro Manganese manganese 60% Min carbon 0.2 % Max form 5 To 50mm Lumps High Carbon Ferro Chrome chrome 60% Min carbon 8% Max form 5 To 50mm Lumps Pure Tungsten tungsten 99% Min carbon 0.1% Max form 5 To 50mm Lumps Pure Moly moly 98% Min carbon 0.15% Max form 5 To 50mm Lumps Titanium Metal titanium 99% Min carbon 0.15% Min form 5 To 50mm Lumps Ferro Vanadium vanadium 30% Min carbon 2% Max form 5 To 50mm Lumps Ferro Tungsten tungsten 35% Min carbon 0.15% Max form 5 To 50mm Lumps Silicon Manganese silicon 15 To 25% manganese 55 To 75% form 5 To 50mm Lumps Ferro Silicon silicon 60% Min carbon 0.15% Max form 5 To 50mm Lumps Ferro Nickel nickel 40% Min carbon 0.1% Max form 5 To 50mm Lumps Ferro Moly moly 60% Min carbon 0.2% Max form 5 To 50mm Lumps Low Carbon Ferro Chrome chrome 60% Min carbon 0.1 Max form 5 To 50mm Lumps Ferro Silicon Zirconium silicon 35% Min carbon 0.2% Max form 5 To 50mm Lumps Medium Carbon Manganese manganese 60% Min carbon 5% Max form 5 To 50mm Lumps Calcium Silicide calcium 30% Max silicon 40% Min form 5 To 50mm Lumps Aluminium Lm4 Ingots aluminium 85% Min silicon 4% To 6% copper 2% To 4% form ingots Pure Chromium chromium 99% Min carbon 0.03% Max form 5 To 50 Mm Ferro Silicon Magnesium silicon 35% Min magnesium 5% Min carbon 0.2% Max form 5 To 50 Mm Nitrated L/c Ferro Chrome chromium 60% Min nitrogen 7% Min carbon 0.1% Max form Less Than 20mm Lumps Pure Carbon carbon 99.5% Min sulphur 0.05% Max ash 1% Max moisture 0.5% Max nitrogen 0.1% Max form 0.5-5 Mm Tin Ingots tin 98% Min form ingots Zinc Ingots zinc 99.95% Min form ingots Copper Phosphorus Shot cu 84.75% phosphorus 12.25% form pellets ca 0.5% To 1.5% Innoculant ba 2% To 3% al 0.5% To 1.5% si 65% To 80% p 0.035 Max s 0.04 Max fe balance size 2 To 6mm Lead cu 0.02% pb 100.00% form wire/ingots Qty: 'ferrosilicon 75% 8,000 Kgs Silicon 75% Min Carbon 0.15% Max Form 5 To 50mm Lumps H C Ferro Chrome 50000 Kgs Chrome 60% Min Carbon 8% Max Form 5 To 50mm Lumps Ferro Molybdenum 8,000 Kgs Moly 60% Min Carbon 0.2% Max Form 5 To 50mm Lumps Low Carbon Ferro Chromium 20,000 Kgs Chrome 61% Min Carbon 0.1 Max Form 5 To 50mm Lumps High Carbon Ferro Manganese 16,000 Kgs Manganese 60% Min Carbon 0.2 % Max Form 5 To 50mm Lumps Chrome 60% Min' Qty: As Above Quantity Required : 102000 Kilogram/Kilograms Shipping Terms : CIF Destination Port : United Arab Emirates Payment Terms : LC Looking for suppliers from : Worldwide Contact : Shubhangi Gadiyar
Please quote for the following wholesale product requirement - Product Name: EN590 10PPM ultra low Sulphur Specifications: Quantity: 100,0000 MT EN590 10PPM ultra low Sulphur. This is for one time trial 2) 400,000 MY En590 10ppm NOTE: Please refer to the following Buyer's requirements, which must be included/considered in your SCO & FCO: 1) The buyer wants to purchase EN590 10 PPM Ultra Low Sulphur Diesel based on the following: 2) FOB Rotterdam Port is the delivery port for the one-month trial supply (100,000 MT). 3) FOB Rotterdam Port is the delivery port for the 12-month supply (400,000 MT) contract upon the success of the trial. Buyer will open a bank instrument for a 12 month contract. 4) Seller shall send seller's working procedure for buyer's acceptance 5) Seller shall send Company registration and Trading License to buyer for due diligence purposes 6) Buyer, upon acceptance of Seller's working procedure, will issue the ICPO 2. 7) Seller shall issue a commercial invoice (CI), and the buyer signs and returns the commercial invoice. 8) Seller shall issue the following Partial POP documents: a) Tank Storage Receipt {TSR} with GPS coordinate and Physical Authorization to Verify {ATV} for Confirmation to Buyer Company. b) Sanitize SGS Report for Successful Transaction. c) Injection Report d) Seller issues UDTA – Unconditional DIP Test 9) Buyer will contact the Seller's storage facility to enable Buyer SGS to gain access to the facility with the seller UDTA and execute the Quality & Quantity Inspection in the Tank Farm for FRESH Analytical Report/Result by SGS and Seller provide the SGS Test Report for buyer verification and confirmation. 10) Upon successful DIP test OR Confirmation of the SGS Test Report, Seller must share FULL POP documents and Buyer will make full payment via MT 103 T/T Wire Transfer to Seller bank account upon the invoice issued. 11) Seller injects product into Buyer’s vessel or injects into Buyer’s tanks Buyer or buyer take over the storage tanks, Seller transfer Title Ownership to buyer name and all export documents to buyer. 12) Upon conclusion of the first lift transaction, the seller pays all intermediaries involved in the Transaction and proceeds with the signing of the contract with Buyer. Please also send me the NCNDA document Please provide me with your feedback at the earliest possible. Quantity Required : 100000 - 400000 Metric Ton/Metric Tons Shipping Terms : FOB Destination Port : Fujairah & Rotterdam., Other-Not Shown Payment Terms : MT 103 Looking for suppliers from : Worldwide Contact : Saleh Alkharoubi
1. water & wastewater solutions ( stp , submersible pumps , dewatering pumps , ro plants ) 2. power solutions ( diesel generators , ats) 3. logistic and material handling solutions 4. i&c �?�¢?? amr and smart metering solutions 5. electric material ( ups , wiring devices , safety switches , lighting fixtures , busway ..etc ) 6. heavy machinery ( jcp ) 7. mro ( maintenance , repair and operation )
Metal scraps in India. our company deals in following items: 1. car alternators, starters & a/c compressor 2. mix motors scrap, transformers, traction(train) motor, armature, stator etc 3. stainless steel scrap, zurik, mix heavies. 4. aluminum scrap, zorba, irony aluminum, mix heavies. 5. cast iron scrap 6. lead and zinc scrap 7. heat exchanger scrap 8. special claded(iron+lead) or sandwich materials 9. special alloys scrap
Titanium Grade 2 / Grade 5, Stainless Steel 440b/c, Monel 400 /k 500,hastelloy C276 / C22 / B2 , Inconel 600 625 700 718 800 900 / 925, Super Duplex Steel 32750 (f53) 32760 (f55), Ferillium 255, Duplex Steel 329/31803/2205, 15 5ph,17 4ph, Stainless Steel 400 Series 422/440c), Nitronic 50(xm 19) / Nitronic 60, Nimonic, Smo 254, 904l. Seamless Pipes To16 Welded Pipes 1/2 To 48 Astm A 312 Tp304, 304l, 310, 316, 316l, 321, 347 Astm A 106 Gr. A,b & C, Astm A 53 Astm A 333 Gr.1, 3, 4, 6, 7, 8, 9, 10, 11 Astm A 335 Gr. P1, P2, P5, P7, P9, P11, P12, P22, P91 Nickel, Monel, Inconel, Titanium, Hastelloy, 904l Brass, Copper, Cupro Nickel 90/10 &70/30 Aluminium Brass, Admirally Brass, Pipe Tubes, & Sheets, Plates 1mm To 200mm Thickness (cr & Hr) Astm A 240 Gr. 304, 304l, 310s, 316, 316l, 321, 347, 348 Astm A 387 Cl1 Gr.2, 5, 7, 9, 11, 12, 21, 22 Astm A 537 Cl1, Cl2 Astm A 515 Gr. 55, 60, 65, 70 , Astm A 516 Gr. 55, 60, 65, 70 Nickel, Monel, Inconel, Titanium
