Please quote for the following wholesale product requirement -
Product Name: Detachable Container Modules
Specifications:
Sizes: 7.2m X 3.6m, 2.7m Ceiling Height.
9m X 3.6m, 2.7m ceiling height
No walls, windows or doors.
All steel members are to be max thickness you can provide.
Just want complete floor construction, corner blocks and posts, and complete ceiling construction including surrounding beams and joists, ceiling sandwich panels, but no roof materials. Surface to be flat and not ribbed.
Vinyl floor finish to be speckled grey. Frames to be light grey. Ceiling panels matt white (Not high gloss).
Explanation: These 5000 units will be moved around a lot and we feel that sandwich panel walls will move too much (and eventually leak) so we plan to use "caravan" composite walls which are all one piece and so can't move when being dragged onto tray tip trucks and slid off them. Because of the 2.7m ceiling height, we understand delivery of such sized panels will be a problem from India or China and so we will have to have the wall panels manufactured in the USA.
We do not want roof material because the 50mm downpipes which are standard in standard typical modules are too small and so we will have to construct complete conventional very low pitched (1 degree) skillion roofs with gutters along one side on all the modules.
These knocked down +/-5000 modules are to be delivered to Orlando, Florida where they will be assembled and fitted out.
You need to be able to provide structural engineering computations to prove the strength of the perimeter frame of the modules.
Can you provide computations which will be acceptable in the USA?
If not, then we will engage structural engineers in the USA to carry out the work.
If you have any questions, please come back to us immediately.
We are very serious.
Without computations acceptable to local councils, the buildings will not be approved for construction.
In the mean time, I need an indicative price for the +/-5000 modules for the USA very urgently . The final price can be arrived at in the near future but if you want to be considered by the client, you need to respond to us quickly.
Quantity Required : 1 Piece/Pieces
Shipping Terms : CIF
Destination Port : Usa, United States
Payment Terms : LC/TT
Looking for suppliers from : Worldwide
Contact : Geoffrey Fulton
52 Inch Low Floor Height Solid Wood Indoor Electric Decorative Ceiling Fan.
Please quote for the following wholesale product requirement -
Product Name: Hydraulic Cylinders Jack
Specifications:
Max. Working Pressure:70MPa
Closed Height:166~815mm
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Indonesia
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Lauw Jonathan
The buyer would like to receive quotations for -
Product : Cylinder Packaging Box
Specifications:
Packaging Tube Kraft Paper Format :
Height External Width Internal Width*
175mm 85mm 75mm
The internal lip rolled edges which are approx. 2mm
Blackmatte
With Liner
Quantity Required : 200 Piece/Pieces
Shipping Terms : CIF
Destination Port : Australia, Australia
Payment Terms : To be discussed with suppliers
Looking for suppliers from : Worldwide
Contact : Breannaandlucas Lane
The buyer would like to receive quotations for -
Product Name: Low Voltage Steel Tubular Pole
Specifications:
5mtr height from ground level, for aerial cables 66Kv power lines with earth cable also
Quantity Required : 75 Piece/Pieces
Shipping Terms : CIF
Destination Port : Australia, Australia
Payment Terms : To be discussed with suppliers
Looking for suppliers from : Worldwide
Contact : Kelvin Turner
The buyer would like to receive quotations for -
Product Name: Low Voltage Steel Tubular Pole
Specifications:
5mtr height from ground level, for aerial cables 66Kv power lines with earth cable also
Quantity Required : 25 Set/Sets
Shipping Terms : CIF
Destination Port : Fremantle, Australia
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Kelvin Turner
The buyer would like to receive quotations for -
Product Name: Power Transformer
Specifications:
General characteristics
Description Single Phase Isolation Transformer
CSS series
In accordance with the IEC/UNE-EN 61558 standard
electrical characteristics
Insulation Dry Type
phases 2
Power 50VA
Primary voltage 230 V
Secondary voltage 21 V
Frequency 50 / 60Hz
Maximum ambient temperature 40ºC
Class I electric shock protection
Continuous service
AN refrigeration
Insulation between windings 4 kV @ 50 Hz 1 min
Insulation between windings and ground 2.5 kV @ 50 Hz 1 min
IP00 degree of protection
Constructive features
Copper winding. Class H 180ºC
Magnetic core Low losses
Insulation thermal class B - 130 ºC
Terminal connection faston 6.3
Impregnation Dielectric varnish
Quantity Required : 800 Unit/Units
Shipping Terms : CIF
Destination Port : Mersin, Turkey
Payment Terms : LC/TT
Looking for suppliers from : Worldwide
Contact : Ozge Muradoglu
Main and auxiliary engine, crankshaft, hydraulic pump & motor, oil purifier, separator spare, turbocharger spare, air compressor series, .Valves and pumps, piston, piston ring, piston pin, piston rod/ piston crown, cylinder liner, cylinder cover, log book, ba chart, publication, fuel injection, nozzles, plunger & barrels, pump
Structural Semi Unitised & Structural Unitised Glazing Systems, Structural Curtain Walls With Sgu & Dgu (6mm+12mm Air Gap+6mm), Spider Glazing, Skylights, Domes, Canopies, Aluminum Louvers, Gi Louvers, Acp Cladding, Funder Max Cladding, Dry Stone Cladding, Techlam Or Equivalent Tiles Cladding, High Pressure Laminates Cladding, Polycarbonate Work, Glass And Aluminum Windows And Doors, Patch Fitting , Automatic Sliding And Swing Doors , Premium Aluminium Windows, Aluplast Upvc Windows, Slim Line Series Windows With Thermal Insulation, Security And Safety Tempered Glass, Powder Coating And Anodizing Of Aluminum Profiles And Products, Steel Railings, Glass Shower Cubicles, Suspended Glass System, & Full Glass Frameless Toughened Glass Doors, Grc.
Structural Semi Unitised & Structural Unitised Glazing Systems, Structural Curtain Walls With Sgu & Dgu (6mm+12mm Air Gap+6mm), Spider Glazing, Skylights, Domes, Canopies, Aluminum Louvers, Gi Louvers, Acp Cladding, Funder Max Cladding, Dry Stone Cladding, Techlam Or Equivalent Tiles Cladding, High Pressure Laminates Cladding, Polycarbonate Work, Glass And Aluminum Windows And Doors, Patch Fitting , Automatic Sliding And Swing Doors , Premium Aluminium Windows, Aluplast Upvc Windows, Slim Line Series Windows With Thermal Insulation, Security And Safety Tempered Glass, Powder Coating And Anodizing Of Aluminum Profiles And Products, Steel Railings, Glass Shower Cubicles, Suspended Glass System, & Full Glass Frameless Toughened Glass Doors, Grc.
Structural semi unitised & structural unitised glazing systems, structural curtain walls with sgu & dgu (6mm+12mm air gap+6mm), spider glazing, skylights, domes, canopies, aluminum louvers, gi louvers, acp cladding, funder max cladding, dry stone cladding, techlam or equivalent tiles cladding, high pressure laminates cladding, polycarbonate work, glass and aluminum windows and doors, patch fitting , automatic sliding and swing doors , premium aluminium windows, aluplast upvc windows, slim line series windows with thermal insulation, security and safety tempered glass, powder coating and anodizing of aluminum profiles and products, steel railings, glass shower cubicles, suspended glass system, & full glass frameless toughened glass doors, grc.
Buyer is interested to receive quotations for the following RFQ -
Product Name: Empty Containers
Specifications:
Semitrailer Type universal Container Carrier Semitrailer
container type 1x20/ 2x20 / 1x40 / 1x30
king pin height 1150 mm. for tractor 4x2
Color On request
axes Pneumatic 4 x 9, first and last axle lifting
Suspension Pneumatic
Brake system Drum type with Wabco ABS/EBS Electronic Braking System, ECE Compliant
support device or equivalent, 25 tons each
Tires size 385/55 R22.5 8 pcs+1
Disks Size 11.75 x 22.5 8 pcs. +1
kingpin 2 inches
electrical system 24V made in accordance with European standards
Options At the rear of the semi-trailer there is an unloading platform for unloading/loading goods into a 20Ft container.
Accessories 12 pcs. fittings for fastening
1 PC. Water barrel with tap for water supply
1 PC. Toolbox
Red fire compartment (without cylinders)
1 PC. Spare wheel
2 pcs. wheel chock
Qty: 8 units
Quantity Required : 8 Unit/Units
Shipping Terms : Ex Works and CIF
Destination Port : Turkey
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Andre
Buyer is interested to receive quotations for the following RFQ -
Product Name : Low Fin Steel Pipe And Steel Tube
Specifications :
1) Steel Pipe 1.5415 16Mo3 OD 22 X WT 1.5 ASTM A335 L = 3 m
2) Low-fin Tube 1.4510 X3CrTi17 OD 19.05 / ID 14.33 X 1.65 AISI 439 L = 3 m. More precise measurements below*.
3) Steel Pipe 1.7380 10CrMo9-10 OD 16 (ID 13) X WT 1.5 ASTM A335 L = 3 m
4) Steel Pipe 1.4541 X6CrNiTi 18–10 OD 20 (ID 18) X 1.0 AISI 321 L = 3 m
5) Steel Pipe 1.5415 16Mo3 OD 18 X 1.8 ASTM A335 L = 3 m
The given lengths are for the manufacture of optimal calibration tubes.. one of each tube is requested for testing
Please note :
Position 2 : 1.4510 Low-Finn TUBE dimensions :
Number of fins: 26-27 / inch (-1063 fins/m) greater distance
between fins -0.91mm
Height of fins: 1.3 mm
Tube thickness under fins: 1.06 mm
Tube inner diameter: 14.33 mm
Tube external diameter (under fins): 16.45 mm
Tube external diameter (finned part): 19.05 mm
Finned tube length 3m (no need for unfinned part).
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Helsinki, Finland
Payment Terms : TT
Looking for suppliers from : Worldwide
Contact : Mikael Keinonen
Please quote for the following wholesale product requirement -
Product Name: Metal Working Machine Like Hardbanding Unit
Specifications :
• All steel skid fabrication approximately 6’ long x 4’ Wide x 7’ High Collapsed with open operator area.
• Unit weighs approximately 3300# as shipped.
• Unit has adjustable, pin able stiff legs with pinch bolts that adjust to pipe rack height.
• Unit has four each Hydraulic powered drum rollers to rotate from 3 ½” O.D. Drill pipe to 10” O.D. Collars, As well as center wear pad on Hevi Wate Drill Pipe.
• Drum Rollers are 6” O.D. x 8” Long. Two below pipe and two above pipe applied with hydraulic pressure.
• Hydraulic conveying system to move pipe in/out of grinding area, mounted on moveable exterior jack.
• Two exterior jacks with 750lbs ball transfer rollers.
• One jack is used with hydraulic conveying system to move Drill pipe from racks to and from the machines grinding area.
• The other jack is used behind machine for center wear pad on Hevi Wate Drill Pipe.
• All Hydraulic jack cylinders have 12” stroke with adjustable legs.
• Hydraulic tank is 35 gallons, 6 gpm @ 1000 psi with heat exchanging fan and radiator.
• Grinder:
- 14” O.D X 3 ¼ wide or 14” OD X 1 1/2” wide Grinding Wheel.
- Grinding wheel moves up and down 14” and 12” left to right.
- Grinding Wheel can tilt hydraulically for 18-degree area repair.
• Unit is electric over hydraulic powered,460-volt 3ph 60 hertz or customers shop power.
• All operational controls are at operator’s fingertips
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : United States
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Andy Valdez
Air floor, row boat, yacht tenders, sport series, seaworthy, rib boats, phosphate fertilizer granular, mop fertilizer, D2 diesel, diesel en 590 ppm, NPK fertilizers, D6 virgin fuel oil, mazut 100, 75, 99, LPG liquefied gas of petroleum, jet fuel airplaine kerosene, D2 diesel and products crude oil, REBCO russian export blend crude oil, RGD regular grade diesel, LSFO low sulphur fuel oil, mazut M 100, base oil all grades
Air floor, row boat, yach tenders, sport series, seaworthy, rib boats, phosphate fertilizer granular, mop fertilizer, d2 diesel, diesel en 590 ppm, NPK fertilizers, D6 virgin fuel oil, mazut 100, 75, 99, LPG liquefied gas of petroleum, jet fuel airplaine kerosene, D2 diesel and products crude oil, rebco russian export blend crude oil, rgd regular grade diesel, lsfo low sulphur fuel oil, mazut m 100, base oil all grades
Main engines makes: man, pielstick, sulzer, mitsubishi, b & w, wartsilla, & many more ranging in all series., main engine spares: pistons, piston rings, piston crown, piston skirt, push rodes, water jackets, liners, cylinder heads, cylinders, plunger barrels, injectors, fuel pumps, exhaust valves, injector nozzles, crank shaft, cam shaft, air starting valves & many more related to any make / model of main engines., marine diesel generating sets: (auxiliary engines) makes: allen, b & w, cummins, caterpillar, crepelle, daihatsu, duetz, detroit diesel, doorman, fiat, lille, g.M-e.M.D, man, mitsubishi, mtu-man, perkins, paxman, rolls royce, ruston, sulzer, skl, skl, stork, volvo penta, wartsilla, yanmar, & many more in different makes models and capacities., turbocharger: complete turbo charger bbc/vtr 160 up to 631, turbo charger casing inlet & outlet, turbocharger rotor & other spare., pumps: gear oil, water and hydra
Please provide a quotation to the following requirement from importer -
Product Name: Computer Server
Specifications :
HPE ProLiant DL380 Gen10 Plus 8SFF NC Configure-to-order Server P05172-B21
3 HPE DL380 Gen10 ICX CTO Mod-X 8SFF P05172-B21 B19
2 6 Intel Xeon-Gold 6326 2.9GHz 16-core 185W Processor for HPE P36932-B21 3
6 Factory Integrated P36932-B21 0D1 4
5 P06035-B21
HPE 64GB (1x64GB) Dual Rank x4 DDR4-3200 CAS-22-22-22
48 Registered Smart Memory Kit
48 Factory Integrated P06035-B21 0D1 6
7 P40430-B21
HPE 300GB SAS 12G Mission Critical 10K SFF BC 3-year Warranty
6 Multi Vendor HDD
6 Factory Integrated P40430-B21 0D1 8
12 HPE 1.92TB SATA 6G Read Intensive SFF BC Multi Vendor SSD P40499-B21 9
12 Factory Integrated P40499-B21 0D1 10
3 HPE DL38X Gen10 Plus x8/x16/x8 Secondary Riser Kit P14587-B21 11
3 Factory Integrated P14587-B21 0D1 12
13 P26262-B21
Broadcom BCM57414 Ethernet 10/25Gb 2-port SFP28 Adapter for
6 HPE
6 Factory Integrated P26262-B21 0D1 14
3 HPE ProLiant DL380 Gen10 Plus x8/x16/x8 Primary FIO Riser Kit P37038-B21 15
3 HPE SN1610Q 32Gb 2-port Fibre Channel Host Bus Adapter R2E09A 16
3 Factory Integrated R2E09A 0D1 17
3 HPE NS204i-p x2 Lanes NVMe PCIe3 x8 OS Boot Device P12965-B21 18
3 Factory Integrated P12965-B21 0D1 19
3 HPE 96W Smart Storage Lithium-ion Battery with 145mm Cable Kit P01366-B21 20
3 Factory Integrated P01366-B21 0D1 21
22 P26279-B21
Broadcom MegaRAID MR416i-a x16 Lanes 4GB Cache NVMe/SAS
3 12G Controller for HPE Gen10 Plus
3 Factory Integrated P26279-B21 0D1 23
3 Intel I350-T4 Ethernet 1Gb 4-port BASE-T OCP3 Adapter for HPE P08449-B21 24
3 Factory Integrated P08449-B21 0D1 25
12 HPE BladeSystem c-Class 10Gb SFP+ SR Transceiver 455883-B21 26
12 Factory Integrated 455883-B21 0D1 27
3 HPE DL38X Gen10 Plus Maximum Performance Fan Kit P14608-B21 28
3 Factory Integrated P14608-B21 0D1 29
30 P38995-B21
HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply
6 Kit
6 Factory Integrated P38995-B21 0D1 31
32 BD505A
HPE iLO Advanced 1-server License with 3yr Support on iLO
3 Licensed Features
3 Factory Integrated BD505A 0D1 33
34 P45916-B21
Microsoft Windows Server 2022 16-core Datacenter FIO Not Pre3 installed en/fr/it/de/es/nl/pt SW
35 P46212-B21
Microsoft Windows Server 2022 16-core DC Add Lic
3 en/cs/de/es/fr/it/nl/pl/pt/ru/sv/ko/ja/xc SW
3 Factory Integrated P46212-B21 0D1 36
3 HPE ProLiant DL38x 8SFF SAS/SATA Tri-Mode Cable Kit P55467-B21 37
3 Factory Integrated P55467-B21 0D1 38
3 HPE Gen10 2U Bezel Kit 867809-B21 39
3 Factory Integrated 867809-B21 0D1 40
3 HPE Bezel Lock Kit 875519-B21 41
3 Factory Integrated 875519-B21 0D1 42
3 HPE Trusted Platform Module 2.0 Gen10 Plus Black Rivets Kit P13771-B21 43
3 Factory Integrated P13771-B21 0D1 44
3 HPE DL38X Gen10 Plus 2U SFF Easy Install Rail Kit P22018-B21 45
3 Factory Integrated P22018-B21 0D1 46
6 HPE ProLiant DL380 Gen10 Plus High Performance Heat Sink Kit P27095-B21 47
6 Factory Integrated P27095-B21 0D1 48
3 HPE ProLiant Door/dock Medium Logistic Service AC114A 49
1 HPE Installation SVC HA113A1 50
3 HPE 300 Series Installation Service HA113A1 5A6 51
1 HPE 5 Y Tech Care Essential with Defective Media Retention Service HU4A7A3 52
3 HPE Proliant DL380 Gen10+ Support HU4A7A3 ZSB 53
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Saudi Arabia
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Mohamed Alnady
The buyer would like to receive quotations for -
Product Name: Laboratory Equipments
Specification with Quantity -
Stainless Steel Sharp Ends Forceps – quantity 3
Chemically resistant and non-contaminating
Non-protein binding and providing bio-inert surfaces
No critical quantities lost due to sticking
No build up on surfaces
Ideal for use under severe laboratory conditions
Excellent non-wetting properties for easy cleaning and can be steam or chemically sterilized
With guide pin
Test tube
Made of Borosilicate glass material.
Uniform bottom, fire-polished rims and consistent lengths.
Suitable for all usual laboratory applications
Volume: 10 mL – quantity 100
Volume 20 mL – quantity 100
Test tube rack – quantity 5
Rack can be securely carried and are fully autoclavable
Racks remain fully orientated until they are twisted again
Use different sizes of test tubes at the same time
Tubes (6 x 15 mL, 9 x 1.5/2.0 mL, 12 x 0.5 mL, 32 x 0.2 mL)
Hi-Accuracy Thermometer – quantity 1
Available with one probe or two probes
Monitor inlet and outlet simultaneously
Thermometer – quantity 3
Water-resistant and shockproof
Stainless-steel probe is resistant to most acids, bases and solvents
Reading updates every second
Memory recall of highest and lowest temperature readings, over period of 5 hours
Silver-oxide battery included
Wide temperature range
Needles – quantity 16 box
Hypodermic needles with thin walls for optimal flow
Fits Luer slip syringes
Colour coded for quick recognition of gauge for easy selection of appropriate flow rate
Sterile and individually wrapped for hygienic, single-use application
Stainless steel needles with epoxy resin adhesives
Needle Gauge: 16G to 28G
Insulin Syringe – quantity 10 box
Individually packed
Sterilized
Use with 1 ml insulin syringe
Length: 60 mm
Sterile Syringes for Single Use – quantity 20 boxes
Sterile
Individually wrapped in a paper/plastic blister pack
Size: 5 mL – quantity 10 boxes
Size 10 mL – quantity 10 boxes
Automatic Syringe – quantity 4
Pistol grip handle.
Self-refilling automatic syringe.
Detachable Luer lock valve system.
High chemical resistance.
Corrosion resistant.
Optimal hand balance and ergonomics
Fast and reliable volume setting.
High reproducibility due to safety locking nut on a micrometric screw.
Plastic Test Tube
Provide reliable containment of laboratory fluid samples
Polypropylene tubes are best suited for applications requiring greater thermal and chemical stability
Dual-position snap caps, heavier gauge walls, and unique construction provide a secure, positive seal
Medical-style packaging materials
3,000 RCF rating (RCF claims refer to Relative Centrifugal Force measured in g-force for materials with a specific gravity of 1.0, used in an appropriate rotor with correct cushion and safety precautions. Tubes used
with organic solvents at temperatures below 0°C may have lower RCF ratings.)
Size: 15mL – quantity 1000
50mL – quantity 1000
Counting chamber /slides. – quantity 20 box
Disposable counting chamber, 20 µm depth, 4 counting areas per slide for semen concentration measurement with CASA systems ,20 PCS/BOX
Covered with a special coating to prevent air bubble formation and to prevent semen from sticking to the chamber surface.
Material non-toxic to sperm cells.
Suitable for low and high sperm concentrations.
Storage: room temperature, noncondensing conditions.
Quality control of each production batch includes: sperm compatibility, chamber height, filling capability, absence of impurities / particles that interfere with concentration measurement
Test tube: 10cm ,disposable ,plastic – quantity 10000 tube
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Bulgaria
Payment Terms : LC/TT
Looking for suppliers from : Worldwide
Contact : Lyubomira Kostadinova
