Please provide a quotation to the following requirement from importer -
Product Name: White Rice
Specifications:
Quantity : 10 tons of quantity in 50Kg bag
Purchase standard: Broken grains, normal rice aroma,
Moisture content Less Than 15%,
Crude protein More Than 7%,
Crude ash Less Than 1%,
Crude fiber Less Than 1%,
Aflatoxin B1 Less Than 30ug/kg,
Vomitoxin Less Than 1000ug/kg,
Fatty acid value (KOH) Less Than 50mg/100g Less Than 0.5mg/kg,
Impurities Less Than 1%,
mottled rice Less Than 5%,
Fresh color without mold and agglomeration, no insects, no odor, double polished, and double selection.
Quantity: 10,000 tons/month
Quantity Required : 10000 Ton/Tons Monthly
Shipping Terms : CIF
Destination Port : Shenzhena Ora Guangzhou, China
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Mirza Naeem Riaz
The buyer would like to receive quotations for -
Product Name: Bitumen (VG 10)
Specifications:
1. Absolute Viscosity at 60 Deg C poises 800 Min
2. Kinematic viscosity at 135 Deg C 250, Min
3. Flash point (COC) Deg C -220 Min
4. Solubility in Trichloroethylene % - 99.0 Min
5. Penetration at 25 Deg C, 100g, 5s, 0.1mm 80 -100
6. Softening Point (R&B) Deg C 40 Min
7. Test on Residue from thin film oven tests/ RTFOT
a- Viscosity ratio at 60 Deg C 4.0 Max
b- Ductility at 25 Deg C, cm, after thin film oven test - 75 Min
Qty 10MT/ month
Note: looking for supplier in Asia & Africa only
Quantity Required : 10 Metric Ton/Metric Tons
Shipping Terms : CIF
Destination Port : Port Tutucorian, India
Payment Terms : LC
Looking for suppliers from : Asia, Africa
Contact : Mohamed Thariq
The buyer would like to receive quotations for -
Product Name: Diesel EN 590 10 ppm
Specifications:
Quantity required: 1M MT of Diesel EN 590 10 ppm per month
1 Buyer sends ICPO to Seller on receipt of Sellers FullCorporate Offer
2 Seller issues commercial invoice CI for the available quantity to Buyer Buyer Signs and returns to Seller with TSA and NCNDAIMFPA are signed by all buyer and seller groups with commission structures
3 Seller issues Dip Test Authorization letter signed by Buyer and Seller
4 Upon the sign of DTA by the Buyer Seller issues fresh
SGS Report
Tank Storage receipt
Injection Report
Certificate of Origin
Product Passport
Authorization to Sell and Collect
Certificat of Origin
5 Buyer order SGS to Conduct Dip test of the product in the Seller Tank on buyer expense if required upon successful dip test Buyer provides Tank details Seller shall immediately submit the SGS inspection Report along with the full Proof of Product POP to the Buyer
6 Sellers tanks are secured in the name of the Seller and the Buyer Buyer makes 100 payment by MT103 TT wire transfer for the total product and Seller and Buyer pay Commission to their intermediaries
7 Seller transfers Title and all relevant documents to the Buyer and injection into Buyers tanks starts at the latest within 24 hours after receipt of the payment by the Seller
Quantity Required : 1000000 Metric Ton/Metric Tons
Shipping Terms : FOB
Destination Port : Rotterdam,, Other-Not Shown
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Dzenan Behram
Buyer is interested to receive quotations for the following RFQ -
Product : White Nadu Parboiled Rice
Specifications:
White Nadu Parboiled Rice To Sri Lankan Goverment tender closed with below conditions
1. CIF USD 400.00 MT upto port of Colombo, Srilanka
2. Import tax in SL Rs. 65/= per kg.
3. Payment terms ONLY DA terms Arrival + 30 days.
4. All shipping documents and payments through bank to bank only.
5. Time limits for arrival of goods to SL
6. OUR COMPANY ALLOCATIONS WILL BE 2000 MTons
7. Relesed open for all for these contitions
For your informations please
White Parboiled Nadu rice
HS Code 10063029 (SL)
Admix by mass 1%
Grain length 4.9-5.9
Length 2.4-2.99
Broken max 5%
Moisture 12%
Quality & Quantity certified by SGS.
Required documents
Invoice, Packing list, weight list load port, BL, Health, Phyto Fumigation, insurance policy ect
Packing 26 kg net, container cargo. 1000 bags in 20 feet container
Do not forward your documents unless covers these conditions.
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Colombo, Sri Lanka
Payment Terms : To be discussed with suppliers
Looking for suppliers from : Worldwide
Contact : Muthiah Varatharaj
Buyer is interested to receive quotations for the following RFQ -
Product Name: Solar Panels
Specifications:
Type :
Batteries , Inverters
80 MEGA WATT
Quantity :2,000 to 3,000 solar panels,
Setting up a 80 MW (megawatt) off-grid solar system in UNHCR camps in East Africa.Below is a breakdown of the key components needed to design and implement an 80MW off-grid solar power system Using an example of 1Mw. You are free to add or adjust.
1. Solar Panels (Photovoltaic Modules)
• Capacity: To generate 1 MW, you would typically need around 2,000 to 3,000 solar panels, depending on the wattage of each panel.
o For example, if each panel has a capacity of 300 watts, you will need approximately 3,334 panels (1,000,000 watts / 300 watts per panel).
• Panel Type: The most common types are monocrystalline and polycrystalline, with monocrystalline being more efficient and often used in large-scale projects.
• Total Capacity: Panels must provide enough energy to meet the daily needs of the system, considering off-grid operation without relying on the grid.
2. Inverters
• DC to AC Inverters: These convert the DC power generated by the solar panels into AC power, which is what most appliances use.
• Inverter Size: For a 1 MW solar system, you will need inverters that can handle 1 MW of power. Typically, this means installing inverters that are slightly larger than the system’s nominal output capacity to handle peak loads.
• Number of Inverters: A 1 MW solar system may require multiple inverters (e.g., 2 x 500 kW or 4 x 250 kW inverters), depending on the configuration.
3. Battery Storage (Energy Storage System)
• Battery Type: Lithium-ion, lead-acid, or other advanced battery technologies can be used. Lithium-ion batteries are commonly used for large-scale solar off-grid systems due to their higher energy density and efficiency.
• Battery Size: To store the energy generated by the solar panels for use during night-time or cloudy days, a large battery bank is needed.
o For example, if the system needs to run 24/7 with a 5-hour backup requirement, you'd calculate the battery bank size based on your daily energy consumption.
o Example: For a 1 MW system that operates 24 hours a day, it would need to generate around 24 MWh daily. Depending on your backup requirements, this could mean needing a battery bank that stores anywhere from 5-10 MWh or more.
4. Charge Controllers
• Function: Charge controllers regulate the charging of batteries to ensure they don’t overcharge or undercharge, prolonging battery life.
• Type: MPPT (Maximum Power Point Tracking) charge controllers are typically used in large solar systems to optimize the energy harvest from the solar panels.
• Sizing: The charge controller should match the system's capacity. For 1 MW systems, you will need a high-power charge controller, and multiple controllers may be necessary depending on the number of panels and battery bank configuration.
5. Mounting Structures
• Function: These are the physical structures that support the solar panels, ensuring they are securely mounted.
• Types: Fixed tilt or tracking mounts.
o Fixed Tilt: More common in regions with consistent sunlight.
o Tracking Mounts: Move the panels to follow the sun, increasing efficiency, but at a higher initial cost.
6. Cabling and Wiring
• DC Cabling: Connects the solar panels to the inverters and charge controllers.
• AC Cabling: Connects the inverters to the battery bank and loads.
• Sizing: Wiring should be appropriately sized to handle the current and minimize energy loss. In high-power systems, large cables and low-resistance wiring are important.
7. Disconnects and Protection Devices
• DC Disconnects: To safely disconnect the solar panels from the system during maintenance or emergencies.
• AC Disconnects: Disconnects the inverter and other AC components from the electrical load or grid.
• Fuses and Circuit Breakers: Protect the system from electrical faults and overloads.
Agri supply
Please quote for the following wholesale product requirement -
Product Name: Copper Cathode
Specifications:
Origin: Any non sanctioned country
Trial quantity: 1,000mt
Monthly quantity: 5,000mt
Contract period: 12 months
Target Price: LME -19%
Commission: 3% for the buyer side
Guarantee: Irrevocable, Confirmed, Non-Transferable 100% Letter of Credit payable at the destination port
Payment method: MT103/TT
Payment timing: Payment to be made after final inspection and receipt of all documents within 3 banking days
Specifications:
- Grade: Electrolytic Copper Cathode Grade A, 99.97% - 99.99% purity
- Dimensions : 914 mm x 914 mm x 12 mm (approx., +/-1%) (LME Standard)
- Weight:
* Per Sheet: 125 kg (+/- 1%)
* Per Pallet: 2 MT (+/- 1%)
* Per Container (Min.): 20 MT (approx.)
* Per Container (Gross): 22.20 MT (approx.)
Procedure:
1. Buyer issues a Letter of Intent (LOI) to the Seller.
2. Seller issues a Full Corporate Offer (FCO) to the Buyer.
3. Buyer signs the FCO, accepting the transaction procedure and payment conditions.
4. Seller issues a draft Sales and Purchase Agreement to the Buyer for review and approval.
5. Seller and Buyer sign the agreed-upon Sales and Purchase Agreement and exchange copies via email.
6. Seller provides proof of product to the Buyer.
7. Buyer's bank issues a pre-advice (MT199) to the Seller's LC receiving bank, confirming readiness to issue the Letter of Credit.
8. Seller's LC receiving bank responds with a notification of intent to receive the Letter of Credit and issue a 2% performance bond.
9. Buyer issues an Irrevocable Standard Letter of Credit (DLC/MT700) to the Seller's bank.
10. Seller issues a 2% performance bond to activate the Letter of Credit.
11. Nominated clearing and forwarding company transports the copper cathode for shipment preparation.
12. Copper cathode shipment is completed at the loading port.
13. Copper cathode arrives at the Buyer's destination port, and final inspection is conducted by SGS, Alex Stewart, CICC, or another internationally recognized company.
14. Final payment is made against the bill of lading and inspection report at the destination port.
Quantity Required : 1000 - 5000 Metric Ton/Metric Tons
Shipping Terms : CIF
Destination Port : China
Payment Terms : MT103/TT
Looking for suppliers from : Worldwide
Contact : Yasu
Refined glycerine 99 7% usp grade
Please quote for the following wholesale product requirement -
Product Name: Whole Cabbage Kimchi
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Philippines
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : --Joe Robert Refugio
The buyer would like to receive quotations for -
Product Name: Whole Cabbage Kimchi
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Philippines
Payment Terms : L/C, T/T Or CAD
Looking for suppliers from : Worldwide
Contact : Joe Robert Refugio
Frozen chicken all parts
Seiner Sonar Cables
Please provide a quotation to the following requirement from importer -
Product Name: Frozen Fish Fillets
Specifications :
Type: Frozen Tilapia Fillets
Sizes: 5/7 7/9
IQF frozen
Quantity Required : 150 Metric Ton/Metric Tons
Shipping Terms : CIF
Destination Port : Ashdod Port Or Haifa Port, Israel
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Guy Elan
Please quote for the following wholesale product requirement -
Product: Gravel Stone
1-3 mm: 109 m³
3-7 mm: 109 m³
7-13 mm: 109 m³
13-20 mm: 109 m³ cubic meter
Qty as above
Quantity Required : 436 Cubic Meter/Cubic Meters
Shipping Terms : CIF
Destination Port : Saudi Arabia
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Mohammad Israfil
Buyer is interested to receive quotations for the following RFQ -
Product Name: Coke Breeze
Specifications:
Raw Material To Make Silicon
Quantity : 6 -7 tons
Quantity Required : 6 - 7 Ton/Tons
Shipping Terms : CIF
Destination Port : Bhutan
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Yash Raj Sharma
Please quote for the following wholesale product requirement -
Product Name: Coconut
Specifications :
Type: Semi Husk Coconut
Quantity Required : 5 - 7 Ton/Tons
Shipping Terms : CIF
Destination Port : Singapore
Payment Terms : To be discussed with sellers
Looking for suppliers from : Indonesia
Contact : Mz
Please quote for the following wholesale product requirement -
Product Name: Pearled Candle Wax, Sand Wax And Palm Wax
Quantity Required : 3 - 7 Ton/Tons
Shipping Terms : CIF
Destination Port : United States
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Dana
Please quote for the following wholesale product requirement -
Product Name: Aluminium Billet
Specifications:
size - 4,5, 6 , 7 inch
Quantity Required : 500 - 1000 Ton/Tons
Shipping Terms : CIF
Destination Port : India
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Sk. Surya
Buyer is interested to receive quotations for the following RFQ -
Product : Aluminium Ingot
Specifications:
A 7 - 99.7%
Quantity:1000 mt
Quantity Required : 1000 Metric Ton/Metric Tons
Shipping Terms : CIF
Destination Port : China
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Sara Sky Schutte
Kidney Natural Beans.
