Specifications:
PVC film 1500 mm width and 100-300 micron thickness range production line
Application: Film
Application: Mask
Screw design: Single screw
Buyer is interested to receive quotations for the following RFQ -
Product Name: Quartz Tubes
Specifications:
High Temperature Resistant Quartz Glass Tubes Cylinder
• Inner diameter: 150 mm
• Wall thickness: 4 or 5 ± 1.2 mm
• Outer diameter tolerance: ± 4.5 mm
• Length: 1000 ± 5 mm
• Straightness tolerance of the tubes must not exceed 0.4% of the tube length
• Tube ends must be cut evenly and ground, chips larger than 2 mm are not allowed
• Working temperature: 1250 C
• Tubes must be resistant to crystallization: when tested at 1000 C for 2 hours followed by air cooling, no signs of crystallization should appear on the tube surface
• Tubes must be thermally resistant: after heating to 800 C and subsequent cooling in running water, they must withstand 15 thermal cycles without cracks, fractures, chips, or spalls
• The tubes must be chemically resistant to acids
• Each tube must be packed individually for shipping
Specifications :
Carbon Fiber Fireproof Welding Blanket Emergency Safety Thickness Heat Resistant up to 900C Fire Retardant Protective Mat
Quantity : 1000 Piece/Pieces trial and later 5000 pieces
Product Name: Super Clear Soft PVC production line
Specifications:
Super Clear Soft PVC production line complete solution ( Machinery Line+ Raw Material Preparation Know-How+Technical Support. Super clear Soft PVC film shall be no smell, The required Thickness is 1mm-1.5mm, the width is 1100mm or 1500mm. The Machine supplier must support us untill we make the correct film here with their engineer at our side. We need formula to prepare the Soft PVC film raw material ( powder or granule or compound).
Please quote for the following wholesale product requirement -
Product : 1MT Jumbo Bags (FIBC)
Specifications:
for Bentonite
Polypropylene bulk bags of 1.0 ton, which should comply with BS EN ISO 21898:2005 and having the with following specifications:
1. Outer bag: Heavy Duty Polypropylene Fabric, 240 g/m, UV stabilized, Polyethylene liner or lamination, which fits into FIBC. Liner thickness should be a 6 mil LLD Polyethylene stitched all the way.
2. Safe Working Load (SWL) 1.5MT
3. Safety Factor: 6:1(both for Offshore and onshore).¨
4. Bag Type:
a. Standard duty reusable for offshore requirement
b. Single trip for onshore requirement.
5. Lifting Loops: Cross corner lifting straps which are stitched all the way around the bag, Color contrasting from the bag's fabric color.¨
6. Filling and discharge: Jumbo bag should have top & bottom spouts for filling and discharge, cord tied, the inner bag to be attached to the top of the outer bag.
7. UV Protection: The bags should be UV treated to the minimum level of 200 Kly. The residual tensile. Strength of the bulk bag should at least be 50% after 12 months.
8. The Bags should have permanently attached label with the following information¨
Manufacturer & Supplier names/address¨
FIBC Class¨
Date of Manufacture¨
Maximum Stacking Height¨
Special treatment¨
Safety Factor
9. Size 95cm x 95cm x 120cm
Quantity: 1 full container
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Jebel Ali Port, United Arab Emirates
Please provide a quotation to the following requirement from importer -
Product Name: Asbestos, Fluoroplastics, Rubber
Specifications :
Physical And Mechanical Characteristics Of Asbestos Materials
Belonging To The Group Of Natural Silicate Materials, Asbestos (from The Greek – Indestructible) Has A Fine-fibrous Structure With Fiber Bundles Ranging In Length From Tenths Of A Millimeter To Several Centimeters. By Combing, Compacting And Twisting Such Fibers, Yarn Is Obtained, Which Serves As The Starting Product For The Manufacture Of Asbestos-technical Materials.
The Advantages Of The Products Are That They:
Resistant To Chemical And Temperature Effects. Destruction Begins After Reaching A Temperature Of 10,000c;
Technological. They Are Quite Easy To Bend, Cut, Separate Into Layers Or Create The Required Thickness By Pressing The Moisture-saturated Blanks.
They Have Good Heat And Sound Insulation Properties.
They Have Low Electrical Conductivity.
Resistant To Stretching
Buyer is interested to receive quotations for the following RFQ -
Product Name - Wall Decorative Items
Specifications :-
Type - Wall Coat Rack And Islamic Wall Art
Wall Coat Rack "(1) Dimension: 44*7.2*10.1cm
(2)Package includ: clothing rock*1,
instruction book*1+pins*2+paper
card*2 (3)Size:45*7.5*10.6cm Bubble wrap and then shrink into brown box with normal logo
(4)Carton:12pc/ctn, 17kg/ctn wooden color"
Wall Coat Rack "(1) Dimension: 44*7.2*10.1cm
(2)Package includ: clothing rock*1,
instruction book*1+pins*2+paper
card*2 (3)Size:45*7.5*10.6cm Bubble wrap and then shrink into brown box with normal logo
(4)Carton:12pc/ctn, 17kg/ctn brown color"
Wall Coat Rack "(1) Dimension: 44*7.2*10.1cm
(2)Package includ: clothing rock*1,
instruction book*1+pins*2+paper
card*2 (3)Size:45*7.5*10.6cm Bubble
Islamic Wall Art Poplar Wooden hanger board size:28*7.5cm Thickness of the board: 3mm Rectangular board*5, twine*1 MDF back board*1 5 different pattern Add staples on the back,Assembled Plastic film thickened Heat shrink with back board Color: Black
Islamic Wall Art Poplar Wooden hanger board size:28*7.5cm Thickness of the board: 3mm Rectangular board*5, twine*1 MDF back board*1 5 different pattern Add staples on the back,Assembled Plastic film thickened Heat shrink with back boad Color: Blue
Islamic Wall Art Poplar Wooden hanger board size:28*7.5cm Thickness of the board: 3mm Rectangular board*5, twine*1 MDF back board*1 5 different pattern Add staples on the back,Assembled Plastic film thickened Heat shrink with back board Color: White
