Hastelloy C-2000 is a high-performance nickel-molybdenum-chromium alloy with copper and tungsten additions, known for its exceptional resistance to a wide range of corrosive media, including sulfuric acid, hydrochloric acid, nitric acid, and their mixtures. Hastelloy C-2000 was developed by Haynes International as an improved version of the original Hastelloy C alloy, with enhanced corrosion resistance and improved mechanical properties. Its chemical composition includes approximately 59% nickel, 16% molybdenum, 16% chromium, 1.6% copper, 0.6% tungsten, and smaller amounts of iron, manganese, silicon, carbon, and aluminum. Hastelloy C-2000 has excellent resistance to localized corrosion, including pitting, crevice corrosion, and stress corrosion cracking, as well as to intergranular attack and corrosion from wet chlorine gas. It also has good resistance to oxidizing and reducing environments, making it suitable for use in a wide range of industrial applications, including chemical processing, pollution control, and pulp and paper production. In terms of mechanical properties, Hastelloy C-2000 has a minimum tensile strength of 620 MPa and a minimum yield strength of 270 MPa, along with a minimum elongation of 45%. It has a hardness range of HB 215-335. Overall, Hastelloy C-2000 is a highly versatile alloy that offers excellent resistance to a wide range of corrosive media, combined with good mechanical properties and ease of fabrication. It is a popular choice for applications where corrosion resistance is critical, such as chemical processing, pollution control, and pulp and paper production. Here are the national standards for Hastelloy C-2000 alloy: United States: AMS 4675, AMS 7233, ASTM B366, ASTM B574, ASTM B575, ASTM B619, ASTM B622, ASTM B626, UNS N06200 Europe: EN 2.4675 Germany: DIN 17744 France: AFNOR NU-30M United Kingdom: BS HR 505 Japan: JIS NW 6200 We can offer the following products:Hastelloy C-276 coil; Hastelloy C-276 strip;Hastelloy C-2000 plate; Hastelloy C-2000 sheets; Hastelloy C-2000 tube; Hastelloy C-2000 pipe;Hastelloy C-2000 flat; Hastelloy C-2000 bar GB:GH3600/JIS:NW 6200/UNS:N06200/W.Nr:2.4675 Hastelloy C-2000 is a high-performance nickel-molybdenum-chromium alloy with copper and tungsten additions, known for its exceptional resistance to a wide range of corrosive media, including sulfuric acid, hydrochloric acid, nitric acid, and their mixtures. Hastelloy C-2000 was developed by Haynes International as an improved version of the original Hastelloy C alloy, with enhanced corrosion resistance and improved mechanical properties. Its chemical composition includes approximately 59% nickel, 16% molybdenum, 16% chromium, 1.6% copper, 0.6% tungsten, and smaller amounts of iron, manganese, silicon, carbon, and aluminum.
Hastelloy C is a nickel-chromium-molybdenum alloy that provides excellent corrosion resistance in a variety of harsh environments. It is commonly used in the chemical processing, petrochemical, and power generation industries for its high resistance to a wide range of corrosive media, including strong oxidizing agents, reducing environments, and hot contaminated solutions. Hastelloy C also exhibits good thermal stability, making it suitable for use in high-temperature environments. Its thermal conductivity is 67 Btu�·in/(hr�·ft�²�·�°F) (9.7 W/(m�·K)), and its coefficient of thermal expansion is 7.7 �? 10^-6 in/in/�°F (13.9 �? 10^-6 m/m/�°C). In addition to its excellent corrosion resistance and mechanical properties, Hastelloy C is also weldable and easily fabricated into a variety of shapes and forms. It can be cold worked, hot worked, and annealed for optimal performance. Overall, Hastelloy C is a versatile alloy that offers exceptional performance in a wide range of harsh environments. Its combination of corrosion resistance, mechanical properties, and thermal stability make it a popular choice for demanding applications in the chemical processing, petrochemical, and power generation industries. US Standards: AMS 5750: Standard specification for Hastelloy C steel bars and shapes; AMS 5786: Standard specification for Hastelloy C welding wire; AMS 5771: Standard specification for Hastelloy C plate, sheet, and strip; AMS 5757: Standard specification for Hastelloy C seamless pipe and tube; ASME SB 574: Standard specification for Hastelloy C forged fittings. European Standards: EN 2.4819: Standard specification for Hastelloy C steel bars, wire, and forgings; EN 10095: Standard specification for Hastelloy C plate, sheet, and strip; EN 10216-5: Standard specification for Hastelloy C seamless steel tubes; EN 10217-5: Standard specification for Hastelloy C welded steel tubes. Japanese Standards: JIS NW 6222: Standard specification for Hastelloy C plate, sheet, and strip; JIS NW 6022: Standard specification for Hastelloy C rods and wires; JIS NW 6220: Standard specification for Hastelloy C seamless pipes and tubes; JIS NW 6221: Standard specification for Hastelloy C welded pipes and tubes. Chinese Standards: GB/T 15006: Standard specification for Hastelloy C bars, wires, and profiles; GB/T 15008: Standard specification for Hastelloy C plate, sheet, and strip; GB/T 15011: Standard specification for Hastelloy C seamless pipes and tubes; GB/T 15012: Standard specification for Hastelloy C welded pipes and tubes. We can provide the following the products:Hastelloy C coil; Hastelloy C strip;Hastelloy C plate; Hastelloy C sheets; Hastelloy C tube; Hastelloy C pipe;Hastelloy N flat; Hastelloy C bar GBï¼?NA1002/JIS ï¼?NW6022/UNSï¼?N06455/W.Nrï¼?2.4819
Hastelloy C-276 is a nickel-molybdenum-chromium superalloy with exceptional corrosion resistance in a variety of aggressive media. It was developed by Haynes International in the 1960s as a more versatile alternative to other nickel alloys such as Hastelloy B-2 and Hastelloy C-4. The high chromium content in Hastelloy C-276 provides superior resistance to oxidizing environments, while the molybdenum and tungsten enhance resistance to reducing media. The nickel content also makes Hastelloy C-276 highly resistant to chloride-induced stress corrosion cracking. Hastelloy C-276 has a wide range of applications in industries such as chemical processing, pulp and paper production, waste treatment, and pollution control. Its resistance to hot sulfuric acid and chlorine environments makes it suitable for use in scrubbers, ducting, and piping systems. It is also used in flue gas desulfurization systems and in the production of organic chemicals such as acetic acid and acetic anhydride. Hastelloy C-276 is a versatile alloy that can be easily fabricated using traditional techniques such as hot and cold forming, welding, and machining. It can also be heat treated to optimize its properties for specific applications. For example, annealing at temperatures between 2050�°F and 2150�°F can improve resistance to intergranular attack, while solution annealing at 2150�°F followed by rapid quenching can enhance resistance to localized corrosion. Overall, Hastelloy C-276 is an excellent choice for applications that require superior corrosion resistance and high strength in aggressive environments. Its versatility, ease of fabrication, and excellent mechanical properties make it a popular choice in a variety of industries. The following are the various national standards for Hastelloy C-276 alloy: United States: AMS 5750, AMS 5751, AMS 5796, AMS 5587, ASTM B366, ASTM B462, ASTM B574, ASTM B575, ASTM B619, ASTM B622, ASTM B626, UNS N10276 Europe: EN 2.4819 Germany: DIN 17744 France: AFNOR NC 17 D United Kingdom: BS HR 202, BS HR 403 Japan: JIS NW 0276 We can offer the following products:Hastelloy C-276 coil; Hastelloy C-276 strip;Hastelloy C-276 plate; Hastelloy C-276 sheets; Hastelloy C-276 tube; Hastelloy C-276 pipe;Hastelloy C-276 flat; Hastelloy C-276 bar GB:GH2761/JIS:NW 0276/UNS :N10276/W.Nr:2.4819 Hastelloy C-276 has a wide range of applications in industries such as: Chemical processing Pulp and paper production Waste treatment Pollution control Scrubbers, ducting, and piping systems in sulfuric acid and chlorine environments Flue gas desulfurization systems Production of organic chemicals such as acetic acid and acetic anhydride. It is also used in various other applications where corrosion resistance and high strength are critical.
1> Back To Back Towel Bars(with and without metal washers) 2> Pull handled available in various sizes with back to back Towel bars 3> Glass thickness : 6 mm~12 mm 4> Size: 19 x 6"/8"/10/12"/18"/24" C/C 5> Material :304 Stainless Steel / #62 Brass Tubular 6> Chrome plated, Brushed Nickel, Brass Polished, Polished Chrome, Gold Plated, Oil Rubbed Bronze.
Product's name: Wood Charcoal Keywords: Flat cube charcoal,Flat cube burning,Lump charcoal , Lump Shisha Charcoal, Silver Charcoal. Specification as following: Specification: Grade A Material (Composition) 90% bamboo charcoal & 10% pure nature bonding Moisture Content less than 6% Fixed Carbon More than 85% Ash 4% Heat value 7000J-8000J Volatile Matter 2% Hardness 90% Temperature (Burning) 700-880°C Burning Time 4-5 hours Others feature smokeless,odourless,innocuity, no bursting it is an environment-friendly products , no any chemicals Size: hexagon shape square diameter outer diameter Æ 40mm 40x40mm inner diameter Æ 10mm Æ 10mm Length 18-25cm 18-25cm Weight (Average) 285g-295/pc 285-295g/pc
1.We use imported base paper from Germany. For solid color, base paper most 80 to 120GSM. For wood base paper is between 70-85 gsm 2. High quality water-base ink- Available over 200 shades in Solid colors and wood grains 3. With clear texture ,high Fidelity meeting international standards. 4. With smooth surface coating 5. Germproof, mould proof, antistatic and wear-resistance. 6. Green environmental protection and Odorlessness which Conforms to the GB18584-2001 standard requirement 7. Can be used for the hot press molding craft, the production efficiency is high. 8. Melamine paper takes shape easily, is widely used for the panel furniture and the decorative yarn. Product Specification: Width: 1230-1260mm or 1300-1800mm Length: 500-1000m For storing: Put it in room to a cool and dry place keep the temperature 20-25°C in room. The best humidity is: 50-60% We can also give you complete decorative solution with Matching Melamine Edge Banding, PU Paper. If you need just need Melamine/prelaminated boards either in MDF / Particle board we can also do so
Non-Sterile Medical Examination Nitrile Gloves Powder free & Latex free 100% Virgin raw materials with FDA certificate & as per ASTM D6319/ CE EN 455 Quality standard: ASTM D6319, with 510K and FDA, CE/EN455, Color: Blue, white Finger Tips: textured Cuff: Beaded Pcs per Box for S/M/L/XL : 100pcs/box Origin: China, Vietnam, Thailand, Malaysia Benefits Protection from unwanted and harmful substances Beaded Cuff ensures easy donning and prevent roll down Superior Strength with better Puncture resistance Finger Tip Textured enhances wet and dry grip Thinner Guage improves tactile senstivity Custom Design enhances comfort and fit Provide an Alternate Solution for individual who are allergic to natural rubber latex Material : Synthetic Nitrile Type : Non-Sterile Powder Free, Amibidextrous, Finger Tip Textured, beaded cuff. Storage: Store in a dry and cool place, the temperature not higher than 38�° C Shelf life: 2 years Physical Properties Tensile Strength: Before Aging 14Mpa min Tensile Strength: After Aging 14Mpa min Elongation at Break (%): Before aging 500% min Elongation at Break (%): After aging 400% min Length: 230 mm in XS, S, M, L, XL Width: 70+/- 10 (XS) Width: 80+/- 10 (S) Width: 95+/- 10 (M) Width: 110+/- 10 (L) Width: 120+/- 10 (XL) Thickness Single wall ( mm): Fingers 0.050mm min Thickness Single wall ( mm): Palm 0.050mm min
Botanical Name Keywords1 : Pineapple extracts Keywords 2 : Ananas comosus Keywords 3 : Anti-Inflammatory Type : Herbal Extract Extraction Type : Solvent Color : Light Yellow Powder MOQ : 100 kg processing time : 1 week-2 week port: Mumbai place of origin: India packaging : 25 kg HDPE payment options : Negotiable
Sheet and Plates Grades : Hastelloy C-22, Hastelloy C-276, Hastelloy C-2000 Form: Hastelloy Sheet Hastelloy Coil Hastelloy Strips Hastelloy Plates Hastelloy Circle Hastelloy Ring
Scrap iron and copper, rubber tree, coconuts and quartz.Air and sea freight shipping, payment method : advance payment , letter of credit: l/c, export
The mentha water is steam distilled from fresh blossoms Bulgarian mentha piperita of during the months of may and June of each year. It is a completely natural product for skin and hair application. Transparent liquid, colorless; specific aroma; essential oil content 0.03, ethyl alcohol content 3.44, relative density 20 C 0.9827, PH 5.25, microbiological purity - corresponds to standard. Benefits: Has an antiseptic and anti-inflammatory effect on the skin. Soothes the skin after sunburns or razor cuts. Gently cleanses and tightens the pores of the oily skin. Moisturizes the skin and improves its general condition.
Rose petals are edible and a traditional ingredient in the foods in the middle east, especially in desserts. In addition to sprinkling rose water on desserts, it is sprinkled on guests as a sign of welcome before the meal. Rose petal jam and cordial are still popular in Europe. Rose hips are a rich source of vitamin c and can be made into a conserve or jam. The petals are then eaten as a candy or used to decorate desserts. Roses are used for excess menstrual bleeding, digestive problems, gonorrhoea, and for liver symptoms. Delicious medicinal preparations can be made from rose petals, including syrup of roses, honey of roses, sugar of roses, rose water, and vinegar of roses. Rose petals have been used for conditions such as fevers, headache, jaundice, joint pain, fainting, weakness, trembling of the heart, poor digestion, and infection.
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag - European Code: 19.12.01 - Basel Code: B1010 - HS Code: 2619.0020 - Quantity: 2000 tons currently available - Monthly quantity: 500-1000 tons depending on production - Size: 350 1200 mm - Fe content: from 77 to 86% - C content: above 2,5-3% - Bulk density: 2,8-3,4 tons/m3 - Loading type: loose in 20 (26-27 tons on average) The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
We offer a wide plethora of Zinc in many forms including LME registered and non registered Special High Grade Ingots and Jumbos, cathodes, dust, foil, granules, powder, pieces, anodize activated powder, shot, and a mossy form. Zinc is a bluish-white, lustrous metal. It is brittle at ambient temperatures but is malleable at 100 to 150°C. It is a reasonable conductor of electricity, and burns in air at high red heat with evolution of white clouds of the oxide. Plating thin layers of zinc on to iron or steel is known as galvanizing and helps to protect the iron from corrosion.
We are able to supply Tin in many forms including LME registered and non registered, ingots, slabs, bars, foil, granules, powder, anodized activated powder, shot, wire, sticks, ingots, and “mossy tin”. Tin is a silvery-white metal, is malleable, somewhat ductile, and has a highly crystalline structure. The element has two colours, with a cubic structure which changes at allotropic forms. On warming it is grey, the ordinary form of the metal. When Tin is cooled below 13.2°C, it changes slowly from white to grey or tetragonal structure. This change is affected by impurities such as Aluminium and Zinc, and can be prevented by small additions of Antimony or Bismuth.
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm Chemical Composition Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.