Petrol Engine Oil, Diesel Engine Oil and Industrial all type of lubricants are Available: 20w50, 5w30, 0w20, 10w40 SN (5W/40), SL (20/50), SJ (20W/50), Cl-4 (15W/40), Ci-4 (20W/50), CH-4 (15W/40), CH-4 (20W/50), CF-4 (15W/40), CF-4 (20W/50) Packing: 1Ltr. - 180 Kg or costumer needed Pe -API SN - ACEA A3/B3-04 - ACEA A3/B4-04 -MB 229.5 (Approved) - Porsche - VW 502/505 -BMW Long Life 98 - OPEL GM LL B -025 Performance Level: -API CH-4 - MB.228.3 - VOLVO VDS3 -MAN 3275 - ACEA E7/08 - Mack EOM Plus -MTU Catogrey II - ACEA A3/B4-08 Performance Features: High thermal stability. Superior oxidation resistant. Controls sludge build-up and deposits. Superior shear stability which result in Reducing oil consumption and wear protection. Cleaner engines and longer engine life Longer gasket and seal life.
X ENGINE OILS (SAE 10W-30/10W-40/10W-60/15W-40/20W-40/20W-50/20W-60 API SN/CF, SM/CF, SL/CF, SG/CF, SG/CD) ( mineral based) LUBENZ PREMIUM PLUS PEO series are designed with high quality base stocks and advanced technology additive system to provide high level of protection and performance. It works harder than other conventional motor oils by continuously preventing dirt and sludge build-up and reduces engine noise. This product meets the requirements of most car manufacturers and is suitable for use in both gasoline and diesel, naturally aspirated or turbo charged engines, operating in all round seasons and adapted to vehicles equipped with catalytic converters running on unleaded fuels. for more information, please contact us.
FULLY SYN PETROL ENGINE OIL SAE 5W-30 / 5W-40 API SN/CF (FULLY SYNTHETIC ENGINE OIL) LUBENZ PRO TECH SN/CF series is formulated with fully synthetic base stocks and advanced technology additive system to provide extra high level of engine protection and performance. It is suitable for higher mileage gasoline and diesel powered modern automobiles requiring an API SN/CF specification, where very high viscosity index oils are preferred to provide much longer oil drain intervals & fuel efficiency in modern engines. It provides maximum protection in engines operating under severe conditions, including high-performance turbo-charged, supercharged gasoline and certain diesel multi-valve fuel injected systems. for more information, please contact us SAE 5W-30 / 5W-40 API SN/CF (FULLY SYNTHETIC ENGINE OIL) LUBENZ PRO TECH SN/CF series is formulated with fully synthetic base stocks and advanced technology additive system to provide extra high level of engine protection and performance. It is suitable for higher mileage gasoline and diesel powered modern automobiles requiring an API SN/CF specification, where very high viscosity index oils are preferred to provide much longer oil drain intervals & fuel efficiency in modern engines. It provides maximum protection in engines operating under severe conditions, including high-performance turbo-charged, supercharged gasoline and certain diesel multi-valve fuel injected systems. for more information, please contact us
We offer engine and industrial lubricants brand LUKOIL
Super Top Fleet Sae 10W-30 / 10W-40 / 15W-30 / 15W40 / 20W-50 API CI-4 (Fully Synthetic Engine Oil) LUBENZ GLORIA CI-4/SL series is high performance diesel engine oil formulated with highly refined base stocks and advanced technology additives to provide reliable performance in the latest emission designs, including those with EGR systems, as well as satisfying the needs of older engines. It may be used in naturally aspirated and turbocharged diesel and petrol engines, providing excellent protection even under the most strenuous conditions. Packaging 1L, 208L, 20L, 25L, 4L, 5L, IBC for more information, contact us.
Product Description Lubricating oil, sometimes simply called lubricant/lube, is a class of oils used to reduce the friction, heat, and wear between mechanical components that are in contact with each other. Lubricating oil is used in motorized vehicles, where it is known specifically as motor oil�and transmission fluid Price of product ( USD price or FOB price) : USD 220 - 230 per MT Product origin : Europe Key Specifications/Special Features : International Standard Minimum Order Size and Packaging details : 1000MT
X DIESEL ENGINE OILS SAE 10W-40 / 15W-40 / 20W-50 / 20W-60 API CJ-4 / CI-4 / CH-4 / CG-4 / CF-4 (MINERAL BASED ENGINE OIL) LUBENZ GLORIA PLUS 15W40 CJ-4 is extra high performance diesel engine oil formulated with highly refined base stocks and advanced technology additives to provide reliable engine performance in the latest emission designs, including those with Exhaust Gas Recirculation (EGR) systems and after treatment systems with Diesel Particulate Filters (DPF) and Diesel Oxidation Catalyst (DOC), as well as satisfying the needs of older engines. It may be used in naturally aspirated and turbocharged diesel & petrol engines and On & Off highway applications, providing excellent protection even under the most strenuous conditions. for more information, please contact us.
* Packing Unit: 1L/12Box * Type: 100% Low Viscosity Synthetic Premium Engine Oil * Key Benefits: - Formulated with High-Performance Additives - Full Synthetic (100% Group 3 Base Oil) - API SP, ILSAC GF-6B / GF-6A Certified * Available Capacities: 1L, 4L, 6L, 20L, 200L(For MOQ and pricing, please inquire) * SAE Grade: 0W-20
LUBENZ XTREME LITHIUM â?? MOLY BASE GREASE are high performance greases, formulated with lithium based thickeners fortified with Molybdenum Disulfide (MoS2) solid lubrication, high quality base oils and extreme pressure additive system to provide excellent protection against wear, rusting and water washout. They are available in NLGI grades ranging from 00 to 3 with base oil viscosity of ISO VG 460 & 320. They are suitable for most types of Automotive and Industrial applications, including heavy-duty Marine applications where high temperatures, heavy shock loads and extreme unit pressures are present. LUBENZ XTREME LITHIUM â?? MOLY BASE GREASE greases are suitable for operating temperatures range from -20�°C to 130�°C, while LUBENZ XTREME LITHIUM â?? MOLY BASE GREASE suitable for operating temperatures range from -25�°C to 120�°C for more information, please contact us.
LUBENZ ULTRA NANO LITHIUM COMPLEX GREASE are high performance greases, formulated with lithium complex based thickeners, high viscosity index base oils and extreme pressure additive system to provide excellent protection against wear, rusting and water washout. They are available in NLGI grades ranging from 00 to 3 with base oil viscosity of ISO VG 220. They are suitable for most types of Automotive and Industrial applications, including heavy-duty Marine applications where high temperatures, heavy loads and extreme unit pressures are present. EP 1, 2, 3 & 2 Moly greases are suitable for operating temperatures range from -20�°C to 140�°C, while EP 00 & 0 greases are suitable for operating temperatures ranging from -25�°C to 130�°C. for more information, please contact us.
LUBENZ PIONER GREASE CALCIUM BASE-EP series are high performance greases, formulated with Calcium based thickeners and an ISO VG 320 mineral base stock to provide added protection against wear, rusting and water washout. They are available in NLGI grades 2 & 3, which are suitable for general purpose automotive applications at moderate temperatures and loads. The suitable operating temperature range is from -20�°C to 80�°C maximum. It does not contain lead or any other heavy metals which are considered harmful to human health and environment. for more information, please contact us.
LUBENZ ULTIMATE HIGH TEMPERATURE CLAY BASED GREASE are high temperature greases, formulated with bentonite clay based thickener and extreme pressure additive system to provide extra protection against wear, rusting and water washout especially in industrial equipment operating under heavy loads and high temperatures. They are available in NLGI grades ranging from 00 to 3 with base oil viscosity of ISO VG 150 & 320. It retains its consistency at high temperatures and provides good storage stability. for more information, please contact us.
LUBENZ FLUX BRAKE FLUID 4 DOT 4 are supreme performance hydraulic brake fluid based on polyethylene glycol ether technology to provide a high level of brake and clutch performance in automotive and commercial vehicles. They are designed to meet or exceed the general requirements of most builders of automotive disc, drum and anti-skid brake systems and clutch systems, used in average to high performance vehicles requiring DOT 3 or DOT 4 level performance. for more information, please contact us.
SYNTHECH SUPER MOTOR OILS SAE 0W-20 / 0W-30 / 0W-40 / 5W-20 / 5W-30 5W-40 / 5W-50 / 10W-30 / 10W-40 / 20W-50 API SN/CJ-4, SN/CF, SM/CF LUBENZ PRO TECH SM series is designed with synthetic base stocks and an advanced technology additive system to provide a very high level of engine protection and performance. It is suitable for higher mileage gasoline and diesel-fueled automobiles and light-duty trucks requiring an API SM/CF specification, where very high viscosity index oils are preferred to provide longer oil drain intervals in modern engines. It provides maximum protection in engines operating under severe conditions, including high-performance turbo-charged, supercharged gasoline, and certain diesel multi-valve fuel-injected systems. for more information, please contact us.
X 2-STROKE MOTOR OIL (MINERAL BASED) LUBENZ RESILIENT 4 T 20W50 SM is designed with high quality synthetic blend base stocks and advanced technology additive system to provide high level of protection and performance. It works harder than other conventional motor oils by continuously preventing dirt and sludge build-up and reduces engine noise. This product meets the requirements of most motorcycle manufacturers and is suitable for use in 4 stroke gasoline engines, naturally aspirated or turbo charged engines, operating in all round seasons and adapted to vehicles equipped with catalytic converters running on unleaded fuels. for more information, please contact us.
TURBO PLUS DIESEL SAE 10W-30 / 10W-40 / 15W-40 / 20W-50 API CJ-4, CI-4 PLUS, CI-4, CH-4, CG-4, CF-4, CI-4/SM, CI-4/SL, CH-4/SJ (MINERAL BASED DIESEL OIL) LUBENZ SILVER HDEO 5000 series are monograde diesel engine oils formulated with high quality base stocks and selected additives to ensure optimum performance and protection for diesel engines requiring an API CF-4/CF-2 specification. Suitable for heavy duty, high output diesel engines where monograde oils are specified. It provides excellent protection in engines, against high temperature piston deposits, wear, corrosion and foaming under severe operating conditions. fior more information, please contact us.
MAX POWER SAE 10W-40 / 10W-60 / 20W-50 / 20W-60 API SN, SM/CF, SL/CF, SL) MINERAL BASED) LUBENZ PREMIUM PEO SAE SF/CD series are monograde crankcase lubricants formulated with high quality base stocks and balanced additive system to provide high level of engine protection and performance. It works harder than other conventional motor oils by continuously preventing dirt and sludge build-up and reduces engine noise. This product meets the requirements of most mixed fleet applications and is suitable for general service and commercial engines. for more information, please contact us.
Lubenz Extra Pixle Fully Synthetic Engine Oil API SP is a premium quality, full-synthetic automotive engine oil designed to provide maximum engine protection for both turbocharged gasoline direct injection, conventional gasoline-fueled and flex-fueled passenger cars and light trucks under all operating conditions. It is particularly recommended for vehicles operating at extreme temperatures or under severe driving conditions, such as towing heavy loads.LUBENZ EXTRA PIXLE FULLY SYNTHETIC ENGINE OIL API SP exceeds new car warranty requirements as defined by ILSAC GF-6. It is uniquely formulated to help combat low speed pre-ignition (LSPI) in turbocharged gasoline direct injection engines. It meets or exceeds Resource Conserving requirements for fuel economy improvement, emission system and turbocharger protection, and protection of engines operating on ethanol-containing fuels up to E85. It is backward serviceable for use where API SN or earlier S category engine oils are recommended. For more information, don't hesitate to contact us.
SUPER SYNTHECH SAE 10W-40 / 5W-30 / 5W-40 / 5W-50 API SN, SM, SL/CF LUBENZ INFINITY SJ series are designed with high quality base stocks and advanced technology additive system to provide high level of protection and performance. It works harder than other conventional motor oils by continuously preventing dirt and sludge build-up and reduces engine noise. Packaging 1L, 208L, 20L, 25L, 4L, 5L, IBC for more info contact us.
GREEN HYBRID SAE 0W-20 / 5W-20 / 5W-30 API SN / SM (FULLY SYNTHETIC ENGINE OIL) LUBENZ PRO TECH SN series are advanced technology engine oils blended in high performance fully synthetic (PAO â?? polyalphaolefin) basestocks fortified with precisely balanced additive system, specifically to help deliver high level of performance and outstanding protection during long service intervals. It is suitable for the latest downsized engines equipped with stop & start technologies and hybrid engines requiring an API SN specification, where very high viscosity index oils are preferred to provide longer oil drain intervals in modern engines. It provides maximum protection in engines operating under severe conditions, including high-performance turbo-charged, supercharged gasoline and certain diesel multi-valve fuel injected systems. Packaging 1L, 208L, 20L, 25L, 4L, 5L, IBC for more information, contact us.
