Ball mill is an efficient tool for grinding many materials into fine powder. The Ball Mill is used to grind many kinds of mine and other materials, or to select the mine.2 It is widely used in building material, chemical industry, etc. There are two ways of grinding: the dry way and the wet way. It can be divided into tabular type and flowing type according to different expelling mine. To use the Ball Mill, the material to be ground is loaded into the Neoprene barrel that contains grinding media. As the barrel rotates, the material is crushed between the individual pieces of grinding media that mix and crush the product into fine powder over a period of several hours Quite simply, the longer the Ball Mill runs, the finer the powder will be. Ultimate particle size depends entirely on how hard the material you're grinding is, and the time how long the Ball Mill runs. Our Ball Mills have been used to grind glass, powder food products, create custom varnishes, make ceramic glaze, powder various chemicals, and make Black Powder Specification of Ball Mill: Name & spec.: MQG900*1800 Speed of bucket (r/min) : 38 capacit¨t/h: 0.65-2 Feed size£¨mm: 20 Final product£¨mm: 0.075-0.89 Mainframe motor£¨kw: 18.9 weight:3.6 Name & spec.: MQG1200¡Á3000 Speed of bucket (r/min) : 32 capacit¨t/h: 1.6-5 Feed size£¨mm: 25 Final product£¨mm: 0.074-0.4 Mainframe motor£¨kw: 45 weight:12.8 Name & spec.: MQG1830¡Á7000 Speed of bucket (r/min) :24 capacit¨t/h: 7.5-17 Feed size£¨mm: 25 Final product£¨mm: 0.074-0.4 Mainframe motor£¨kw:245 weight:36 please contact with cherry lee!
Hydraulic Cone Crusher HP Series high efficiency Hydraulic Cone Crusher is a world-level cone crusher developed from the up-to-the-minute technology of Germany. The cone crusher not only improves the production capacity and crushes efficiently, but also widens the applying area, the hardness of materials range from limestone to basalt. It has a second-to-none crushing performance in the work of medium-size crushing, fine crushing and super fine crushing. The crusher is the improved type of spring cone crusher and can be used to replace ordinary hydraulic cone crusher in the line of mining and construction. It is the most ideal equipment for large stone crushing factory and mining industry. Character and technical advantages: HP Series high efficiency Hydraulic Cone Crusher has a better performance compared with spring cone crusher and ordinary Hydraulic Cone Crusher: 1. A high crushing ratio and production efficiency. 2. Less spare part consuming and low operation cost. 3. between-layer pressuring crushing and better finished product shape. 4. Hydraulic protection and hydraulic cavity clearing, high automatization and less stop production and repairing time. 5. Thin oil lubrication makes the life time increased. 6. Manifold crushing cavity. 7. Easy maintenance and operation. 8. The crusher can provide customers a higher capacity, better product shape, and an easy operation. Technical Data: Type:HPC-160 Cavity (coarse/fine:C Discharge setting min.(mm):6 Feed opening (mm):150 Capacity (t/h): 120-240 Power (kW): 160 Weight (t):13 movable cone diameter (mm):950 Type:HPC-160 Cavity (coarse/fine:F Discharge setting min.(mm):13 Feed opening (mm):76 Capacity (t/h): 55-180 Power (kW): 160 Weight (t):13 movable cone diameter (mm):950 Type:HPC-220 Cavity (coarse/fine:C Discharge setting min.(mm):6 Feed opening (mm):225 Capacity (t/h): 150-430 Power (kW): 220 Weight (t):18 movable cone diameter (mm): 1160 Type:HPC-220 Cavity (coarse/fine:F Discharge setting min.(mm):13 Feed opening (mm):86 Capacity (t/h): 90-260 Power (kW): 220 Weight (t):18 movable cone diameter (mm): 1160 Type:HPC-315: Cavity (coarse/fine:C Discharge setting min.(mm):6 Feed opening (mm):290 Capacity (t/h): 90-260 Power (kW):315 Weight (t):26 movable cone diameter (mm):1400 Type:HPC-315 Cavity (coarse/fine:F Discharge setting min.(mm):13 Feed opening (mm):100 Capacity (t/h): 190-610 Power (kW): 315 Weight (t):26 movable cone diameter (mm):1400 Type£»HPC-400: Cavity (coarse/fine:C Discharge setting min.(mm):13 Feed opening (mm):320 Capacity (t/h): 230-700 Power (kW): 400 Weight (t):33 movable cone diameter (mm): 1500
Rotary dryer is mainly consist of rotary body, raw material feeding plate, driving and supporting device, etc.The operation principle of rotary dryer: the raw material plate which is arranged reasonably with changeable angles in order, throws moisture materials into the rotary cylinder. Then water will be separated from the materials by hot air-flow and changed into vapour to be discharged into the atmosphere. Then the materials would be dryed.Rotary dryer is used to dry slag, clay, limestone, It is mainly used for cement, chemical, metallurgical, building materials industries. Its advantages are as follows: high dry capacity, smooth rotation, low energy consumption, easy operation, high output and so on.Rotary Dryer is used for drying materials with a certain humidity or granularityin milling of ores, building materials, metallurgy and chemical industry.Gyro drying machinery has a strong adaptability of materials and it can dry various materials. The operation is very simple and liable. For this reason, it isused widely.Indirect heat transfer Rotary dryer is used for drying materials with humidity or granularity in the industries of mineral dressing, building material, metallurgy and chemical. Rotating dryer can be used for drying many kinds of materials and with convenient and reliable operation; therefore, it has been widely used. 5000t
Model Speed of bucket (r/min) Weight of ball (t) Size of feed opening (mm) size of outputting feed (mm) Production (t/h) Power (Kw) Weight (t) 900 1800 38 1.5 20 0.075-0.89 0.65-2 18.5 3.6 900 3000 38 2.7 20 0.075-0.89 1.1-3.5 22 4.6 1200 2400 32 3.8 25 0.075-0.6 1.5-4.8 45 12.5 In bulk
Ball mill
Rotary kiln
(High Pressure Suspension Mill)High Pressure Suspension Mill are used to grind barite, limestone, kaolin, and ceramics and slag, whose Moh's hardness is below 9.3 scales, non-inflammable and non-explosive material. Features: 1) Our patent product 2) Product size is adjustable in the range of 80 - 425 meshes 3) Better design which reduces cost Models available: 1) YGM75 High Pressure Suspension Grinder Mill a) Number of roller: 3 b) Diameter of roller: 260mm c) Height of roller: 150mm d) Inside diameter of ring: 780mm e) Height of ring: 150mm f) Max. feeding size: 15mm g) Fineness of product: 0.613 - 0.033mm h) Capacity: 0.28 - 3.0MT http://www.grinderpro.com/product.html 2) YGM85 High Pressure Suspension Grinder Mill a) Number of roller: 3 b) Diameter of roller: 270mm c) Height of roller: 140mm d) Inside diameter of ring: 830mm e) Height of ring: 140mm f) Max. feeding size: 20mm g) Fineness of product: 0.613 - 0.033mm h) Capacity: 0.35 - 3.4MT i) Dimensions: 5,300 x 4,100 x 5,200mm 3) YGM95 High Pressure Suspension Grinder Mill a) Number of roller: 4 b) Diameter of roller: 310mm c) Height of roller: 170mm d) Inside diameter of ring: 950mm e) Height of ring: 170mm f) Max. feeding size: 25mm g) Fineness of product: 0.613 - 0.033mm h) Capacity: 1.5-5MT i) Dimension: 7,100 x 5,900 x 7,900mm 4) YGM130 High Pressure Suspension Grinder Mill a) Number of roller: 5 b) Diameter of roller: 410mm c) Height of roller: 210mm d) Inside diameter of ring: 1280mm e) Height of ring: 210mm f) Max. Feeding size: 30mm g) Dimensions: 9,200 x 7,250 x 9,700mm h) Capacity: 5-8MT
Model 3R2115 Max Feeding Size (mm) 15 The final products size (mesh) 80-325(finest 500) Capacity (T/H) 0.2-1.5 Rotational Speed of the Central Axis 160Rev The inner Diameter of Roller (mm) ¿¬630 The Diameter of Roller (mm) í-210 Height of Roller and Ring (mm) 150 Motor of Mainframe Y200L-8-15KW Motor of Air Blower Y132M-4-11KW Motor of Separator Y112M-6-2.2KW Dimension (L*W*H) 4.6*3.4*5.9
High-pressure Micro-powder Grinding Machine(fine powder mill) From VIPEAK can be used in grinding the regular material, such as kaoline, limestone, calcite, talcum, barite, gesso, ferric oxide red, ferric oxide green, aluminum hydroxide, pigment, bentonite, argil, coal and active carbon that Moh's hardness is below 4, and humidity is 8%, non-flammable explosive mineralsí» processing. The product size is between 500 meshes (25 micron) and 1250mesh, the finest to be 2500 meshes (5 micron) Models available: 1) YGM7826 High Pressure Micropowder Grinder a) Number of roller: 3 b) Diameter of roller: 260mm c) Height of roller: 150mm d) Inside diameter of ring: 780mm e) Height of ring: 150mm f) Feeding size:
Vipeak High Pressure Midum Speed Grinder is suitable for grinding the barite, limestone, kaollnite, ceram and slags, etc. which below scale 9.3 of Moth and below 6% shadness and 280-odd sorts of non-inflammable and non-explosive stuff in the trades of mining, metallurgy, chemical engineering and building material for high fine powder generating and processing . The Product size is adjustable in the range of 80-425 mesh. It is possible to produce 30-80 mesh coarse powder through special device in the machine. High Pressure Midum Speed Grinder Features: 1. Having higher capacity of 20-30% relatively to Raymond mill, and Higher grinding force of rollers to stuffs because of high pressure springs.( notes for 5R4121: compared to 5R4119 raymond mill, at the same motor powder, capacity is improved to 10%, and Higher grinding force of rollers to stuffs because of high pressure springs.) 2.It can process the mineral stuffs of Moh's hardness below 9.3 grade. 3.The final products have a wide range, max. powders are up to 0.95mm(20mesh), mini ones are 0.038mm(400mesh). little pollution and dust collector efficiency is to national limitation. High Pressure Midum Speed Grinder Working process: large stuffs are delivered to bunker by elevator after crushed, then to chamber by electric feeder. In mainframe, shovels scoop up stuffs into the parts between rollers and ring, the processed powders are blowed up to analytical engine with wind entering chamber by blower, part of powders which can not be up the demand fineness will fall back to be grinded, left(that is final product) with airflow enter concentrator and divided with air then discharged from discharge vavle. Air returns to blower and circles, flowing in minus state.
On basis of many times experiments and improvement, introducing the latest mechanical techniques of Sweden , High Pressure Micropowder Grinding Mill, the latest industrial micro-powder grinding mill, is a new type grinding machine for producing micro-powder. Note: When users grind the material that hardness degree is between 4 and 6, the service life of the wearing parts will be shortened. Vipeak High Pressure Micro-powder Grinding Mill can grind calcite, limestone, calcite, dolomite, kaolin, bentonite, talc, illite, pyrophillite, barite, meerschaum, fluorite, potash ore and other more than 200 kinds of materials that Moh's hardness is below 6, non-explosive, non-flammable minerals. Features of High Pressure Micropowder Grinding Mill: 1 Energy-saving 2 Wide Application Range 3 Good craftmanship 4 Powder Fineness:
Sand Making & Washing Production Line: Henan Vipeak Heavy Industry Co., Ltd. manufactures various equipments for whole set of sand-making production line, and provides superior technical support for customers. The whole sand-making production line consists of vibrating feeder, jaw crusher, PCL vertical shaft impact crusher (sand-making machine), vibrating screen, sand-washing machine, belt conveyor, electric control system, etc. We design different production lines ranging 50 t/h to 500 t/h. We have been researching the sand-making machine for years, and we have made it part of the production line. The whole set of sand-making production line designed by our company is suitable to crush the hard limestone, granite, basalt, gravel, slag, etc and artificially sand making for hydroelectric power, building material, high way, city construction, etc. Different models of equipments are combined to meet different customersí» different demands according to different craft requirements. Process of the Production Line: The raw material is transferred to jaw crusher for primary crushing by vibrating feeder, then the crushed materials are transferred to sand-making machine through belt conveyor for secondary crushing. The crushed materials will be transferred to the vibrating screen. The materials with suitable size will be transferred to sand washing machine, after being washed, then clean final products will be discharged. The others with unsuitable size will be screened from vibrating screen, then will be transferred to the sand-making machine, this forms a closed circuit manifold cycles.
Raymond mill(vipeak) With qualified products and good service, zhengzhou vipeak heavy industry machinery co., ltd supplies series raymond roller mill(raymond mill), which is suitable for grinding barite, calcite, potash feldspar, talcum, marble, limestone, ceramics, etc. Whose mohs' hardness is below 7 scales and humidity does not exceed 6% and other non-inflammable and non-explosive material. Features: Three-dimensional structure Land-saving The screen-passing rate can reach to 99% The transmission is steady and reliable; The transmission device of mainframe adopts airtight gear case and zonal wheel. Centralized control for the electric system, convenient to operate. Model 3r2115 Max feeding size (mm)15 The final products size (mesh)80-325(finest 500) Capacity (t/h)0.2-1.5 Rotational speed of the central axis160rev The inner diameter of roller (mm)¿¬630 The diameter of roller (mm)íd210 Height of roller and ring (mm)150 Motor of mainframey200l-8-15kw Motor of air blowery132m-4-11kw Motor of separatory112m-6-2.2kw Dimension (l*w*h)4.6*3.4*5.9 3r2115 Max feeding size(mm):15 The final products size(mesh):80-325(finest500) Raymond roller mill 3r2715 Number of roller: 3 Diameter of roller: 270mm Height of roller: 140mm Inside diameter of ring: 830mm Height of ring: 140mm Max. Feeding size: 15-20mm Fineness of product: 0.044-0.165mm Capacity: 0.9-3.8 t
Three-dimensional structure land-saving the screen-passing rate can reach to 99% the transmission is steady and reliable; the transmission device of mainframe adopts airtight gear case and zonal wheel. Centralized control for the electric system, convenient to operate. Model 3R2115 Max Feeding Size (mm) 15 The final products size (mesh) 80-325(finest 500) Capacity (T/H) 0.2-1.5 Rotational Speed of the Central Axis 160Rev The inner Diameter of Roller (mm) º¦630 The Diameter of Roller (mm) º¦210 Height of Roller and Ring (mm) 150 Motor of Mainframe Y200L-8-15KW Motor of Air Blower Y132M-4-11KW Motor of Separator Y112M-6-2.2KW Dimension (Lí-Wí-H) 4.6í-3.4í-5.9 Raymond Roller Mill 3R2715 Number of roller: 3 Diameter of roller: 270mm Height of roller: 140mm Inside Diameter of ring: 830mm Height of ring: 140mm Max. Feeding size: 15-20mm Fineness of product: 0.044-0.165mm Capacity: 0.9-3.8 t Raymond Roller Mill 4R3216 Number of roller: 4 Diameter of roller: 320mm Height of roller: 160mm Inside Diameter of ring: 970mm Height of ring: 160mm Max. Feeding size: 20-25mm Fineness of product: 0.044-0.165mm Capacity: 1.8-4.5 t Raymond Grinding Mill 5R4121 Number of roller: 5 Diameter of roller: 410mm Height of roller: 210mm Inside Diameter of ring: 1270mm Height of ring: 210mm Max. Feeding size: 20-25mm Fineness of product: 0.044-0.125mm Capacity: 5-8 t For information, please see our website: http://www.grinderpro.com/Raymond.html
The spray pyrolysis film preparation method is to atomize the solution and spray it onto a heated substrate, and then obtain a desired material structure on the substrate. This equipment is an ultrasonic spray pyrolysis equipment independently developed by our company. It is equipped with 40KHz 130W ultrasonic sprayer, PID temperature-controlled substrate heater plate, high precision peristaltic pump and precision programmable stepping motor moving mechanism. The integrated design of the device can accurately control the parameters such as the amount of solution, the speed of the spray particles and the size of the spray particles, and the substrate temperature can also be controlled to meet your various experimental needs. Ultrasonic spray pyrolysis coater application range: This material preparation method is particularly suitable for the deposition of oxides and has a long history of application in the preparation of transparent electrodes. This method is now widely used in the preparation of perovskite solar cells.
Mobile crusher, Mobile Rock Crushers, Mining Quarry Equipment Equipped with hydraulic cone crusher made by Fote mining machinery, Portable cone crusher station can produce aggregate of 10-45mm.Its arrangement device is installed laterally and is effected in closed and hydraulic way. It allows the arranging operation easier and faster. The arrangement can be realized via control box, which makes the system more suitable to arrange discharging opening in regular time. Advantages: 1.High performance crusher, large crushing ratio, the force crushing pioneer. 2.Vehicle motors and control box are all included. 3.Vibrating feeder and vibrating screen integrated with jaw crusher, cone crusher and impact crusher. 4.The belt conveyor, vibrating screen and crusher under the screen are integration vehicle installation. 5.Vehicle installation supporting is easier for equipment to station in the working place. 6.Turn axle of traction is convenient for road transit and expanding the working place. mobile crushers: http://www.orecrusherfactory.com/orecrusherpro/mobile-curshers1.html The working priciple of Mobile Cone Crusher: Mobile Cone Crusher (mobile crushing and screening plants) is composed of primary crushing and screening station and secondary one, belt conveyor, etc. Every crushing station is an independent working unit, they can respectively assume their different responsibility, and the belt conveyer is responsible for material transmitting and piling up between each crushing station. http://www.orecrusherfactory.com/orecrusherpro/10-mobile-crusher.html Email: vip@sinoftm.com Mobile crusher/Mobile Rock Crushers/Mining Quarry Equipment
There are tin foils in many places in life, such as chewing gum, chocolates, and over-the-counter packaging. They all have a certain aluminum content, and recycling of these wastes will result in a lot of metal aluminum resources. Since aluminum and aluminum alloys have good ductility, their use in life is very broad. So how can these aluminum-plastic composites be completely separated into aluminum and plastic? Dongying Group gave a perfect answer - Aluminium-plastic separation equipment refers to equipment that completely separates aluminum-plastic composites into aluminum and plastic. The equipment is suitable for handling scrap and waste of various pharmaceutical factories, aluminum-plastic board factories, food and beverage factories and other aluminum foil packaging industries. For example, used bags, capsules, toothpaste, wow bottles. Aluminum plastic bags, candy bags, tea packaging, and decorative aluminum-plastic plates. The aluminum scraps can be smelted by the recycled aluminum foil in the equipment, which is the finest raw material for the silver powder factory, the fireworks factory, and the aluminum factory (trained into aluminum ingots); the PVC plastic can be pressed into pieces, and the tube can be used for packaging and conveying pipelines. Great potential. The main advantages of Dongying Group's aluminum-plastic separators are as follows: 1. Complete dry physical separation will not cause secondary environmental pollution. 2. The separation rate of aluminum plastic is as high as 99%, with good social and economic benefits.
There is no doubt that continuous waste plastic pyrolysis plant is based on batch equipment design, so their main pyrolysis process is consistent with the principle, the latter is only more intelligent and easier to operate, which also reduces the more manpower and material resources. Its main advantage over small pyrolysis equipment is that it can continue to work 24 hours a day. There is no need to stop in the middle because of loading and unloading or cooling, which can save a lot of time and make the whole process more efficient. First of all: Put the collected plastic products into the plastic crusher and crush the waste plastic. This will not only save space but also accelerate the reaction speed of waste plastics in the furnace, and in short, it can improve the operating efficiency of the equipment. Secondly, the broken waste plastic is fed into the reactor through a pusher and the reactor is heated. The temperature of the reactor reached a certain height, and waste plastic pieces cracked out of oil and gas, carbon black. Once again, the oil and gas that has been cracked enter the condensing system. When the hot oil and gas meets cold, it is liquefied into heavy oil and falls into the oil tank. Then: For the treatment of the three wastes of waste gas and waste water generated during the operation of the equipment, the company launched a desulfurization and deodorization tower system to thoroughly help customers solve the problem of factory odors and meet European and American environmental protection and emission standards. Finally, the carbon black be outputed. Advantages of continuous pyrolysis equipment: 1. The PLC control system can improve equipment operating efficiency.Because it can continuously feed materials continuously for 24 hours. Great savings in manpower and material resources. 2. The single machine processing capacity is large and the floor space is small, saving the cost of purchasing land in the previous period. 3. Use an accurate calculation system to ensure that the feed is fully cracked and the oil yield is high. 4. Indirect heating system, long service life. The end products of DoingGroup's continuous waste plastic cracking equipment mainly include fuel oil, carbon black and combustible gas. Their specific uses are as follows: 1. Fuel: Mainly used for heating oil in iron and steel plants, and boiler plants. It is also commonly used in heavy oil generators to generate electricity. 2. Carbon black: Carbon black briqutting can be produced for burning, refining from carbon black , can be produced for new tires, and pigment manufacturing materials.
scrap metal chrusher is a professional equipment to crush metal cans into the required size from 10-30mm. Metal scrap processing machine is mainly used for waste recycling field. Our scrap metal crusher machine is used for scrap cans recycling in large-scale recycling centers, which is collecting cans, paint bucket etc. The scrap metal chrusher machine has the advantages of high yield, low energy consumption, high efficiency, the material is crushed uniformity. It is low noise, no pollution, simple operation and easy maintenance etc. scrap metal chrusher machineis in the use of hammer to strike with high speed and high torque of the motor driving, Scrap metal cans will come from the top opening into the crushing chamber, in the crushing chamber, there are durable lining board and hammers and rotor, the high-speed rotating can extrude,tear,impact,and grind scrap metal cans into small granules, then discharged from the bottom of the sieve plate with changeable mesh size according to crushing size.
The DoingGroup's waste plastic cracker is a high-temperature pyrolysis chemical reaction performed in an oxygen-free environment. This reaction can reduce the bulk of macromolecular compounds, waste plastics or other organic solids into small pieces. Molecular compound. Of course, in addition to waste plastics, you can use this cracking device to treat other organic solids, such as waste tires, waste rubber, and other organic solid waste. The Dongying Group has always been committed to the research and development of refining equipment and has made its contribution to the industry second to none. With the maturity of the domestic market, DoingGroup has turned its sights around the world and established an office in Thailand. At the same time, we have The cracking equipment is also known and sought after by people in various countries around the world. The DoingGroup's waste plastic cracking equipment is so popular because of its high oil output rate. Our equipment has different capacities. Taking 10 tons of equipment as an example, 4.5 tons of fuel can be obtained in one day of operation. According to the conservative calculation of the value of fuel in the market, a day's worth of 1,800 dollars will be obtained for the fuel produced by the equipment. Of course, this benefit does not include carbon black and the income of steel wire. So why did the DoingGroup's cracking equipment have such a high oil output rate? First of all, DoingGroup's waste plastic cracking equipment is designed with a vacuum device, which can provide negative pressure and drain oil and gas. This device ensures that even if the oil and gas are not fully condensed in the condensing system, they will pass through the pressure and be filtered again in the condensing system until the oil and gas are fully filtered. Second, use the most advanced and most effective condenser in the industry. This type of condenser uses column tube condensation, also known as a three-stage cooling system, which ensures that the cracked oil and gas is fully cooled and the oil yield is high. Finally, the DoingGroup's cracking equipment has oil-water separators. It not only can purify oil and gas, and separates water from oil and gas, but also can prevent the backflow of oil and gas and increase the oil yield. Contact: Ms Bonnie Phone: +86-371-5677 1821 Mobile/Wechat/Whatsapp:0086-135-2669-2320 Skype: bonniezhao2 Email: oilmachine@doinggroup.com http://www.recyclingpyrolysisplant.com http://www.doinggroup.com
