Petroleum By Products Minimum Quantity: 50,000MT per Month Maximum Quantity: 400,000MT per Month CIF FOB Price: GROSS USD $80.00 / NET USD $ 70.00
LIQUIDIFIED PETROLEUM GAS. GOST 20448-90 - Minimum Quantity: 10,000 Metrie Tons per Month Maximum Quantity: 1,000,000 Metrie Tons per Month
IOC JET A-1 is a petroleum distillate blended from kerosene fractions having Aromatics below 20 % v/v, Total sulphur below 0.25 % mass, Mercaptan Sulphur below 0.002 % mass, freezing point below - 47 0 C and a flash point above 38 0 C. It contains Static Dissipator additive STADIS 450.
Density @ 15 C max.... 991 kg/m3 Viscosity @ 50 C max.... 180 mm2/s Water max... 0.5% (v/v) Sulphur max... 3.5 % (m/m) Flash Point min.... 60 0C Pour Point max... 30 0C Micro Carbon Residue max... 15 % (m/m) Ash max.... 0.1 % (m/m) Total Sediment Potential max... 0.1 % (m/m) Vanadium max.... 200 mg/kg Aluminium + Silicon max... 80 mg/kg Zinc max... 15 mg/kg Phosphorus max... 15 mg/kg Calcium max... 30 mg/kg
The unit of viscosity used is the Centistoke and the d6 fuel most frequently quoted are listed below in order of cost, the least expensive first : * IFO 380 â?? Intermediate d6 fuel oil with a maximum viscosity of 380 Centistokes * IFO 180 Intermediate d6 fuel oil with a maximum viscosity of 180 Centistokes * LS 380 Low-sulphur (
1- Antioxidant in hydro processed fuel mim/max..... 17/24 Mg/l 2- Antioxidant non hydro processed fuel max.....24 Mg/l 3- Static dissipater first doping ASA-3 max ...... 1Mg/l 4- Stadis 450 max.... 3Mg/l 5- Specific energy, net min.... 18.4 MJ/kg 6- Smoke point max.... 19M/m 7- Luminomitier number max.... 45 8-Naphthalenes max.... 3%volume 8-Total Acidity max... 0.1 MG. KOH/g 9-Aromatic max... 22.0%vol 10-Sulphur Total max... 0.3 %mass 11-sulphur Mercaptan max... 0.003 %mass 12-Recovered residuals max.... 1.5%vol 13-Loss max.... 1.5%vol 14-Flash Point max... 42 Centigrade 15-Density at 15.�°C Min/Max... 776/840 kg / m2 16-Freezing point max.... - 40 Centigrade 17-Corrosion copper (2hrs at 100c) max.... 1 18-Corrosion silver (4hrs at 100c) max.... 1 19- Filter Pressure differential mm.Hg max... 25 20-Tube deposit rating (visual) max....
1-Ash content..... 0.14%max 2-Mass fraction of sulphur.... 0.5max 3-Temperature of solidification.... 25� C max 4-Kinematics viscosity.... 118max 5- water content.... 0.5%max 6- Mechanical impurities... 0.1%max 7- Hydrogen sulphide content Hâ??S ppm..... 0.5max 8- Carbon residual.... 7%max 9- Aluminium (Al) ppm.... 5 max 10- silicone (si)..... 12 max 11- sodium (NA).... 15max 12- Asphaltene m/m... 3.6%max 13- lnltial Bolling Point deg.... 216�°C 14- Final Bolling Point deg.... 550C 15- percent recovered.... 78%vol 16- Residual.... 22%vol 17- Total Nitrogen... 0.192%m/m
Supplier from Abu Dhabi, UAE We Supply American Dyno-tab Products (Fuel Treatment, Injector Cleaner, Octane Booster, Fuel Stabilizer, ULTRA Fuel Booster, Cooling System Treatment, Windshield Cleaner), in tablets for all kind of fuel tank capacities Benefits: 1-Help improve fuel economy 15% - 20% 2-For Gasoline & Diesel Engines 3-Suitable for cars, trucks, vessels, bikes, generators 4-Increase power 5-Increase performance 6-Increase Octane 7-Increase Acceleration 8-Reduce smoke & emissions 9-Clean Engines 10-Made in USA 11-EPA (Environmental Protection Agency) Approval 12-Global Warranty.
Gas Oil (Diesel) Gasoline (Petrol) Kerosene Fuel Oils Aviation Fuels Furnace Oils
We can cater Gas Oil 10 ppm from two sources: - from ADNOC, with port of Loading at Hamriyah and Ruwais. We can cater quantities upto 150,000 MT per month. Pricing will be based on Arab Platts. - from Russia (EN590), with port of loading from non-sanctioned ports. We can cater quantities upto 100,000 MT per month. Pricing will be at a discount from Med platts. Serious Buyers only.
We can cater following types of HFO, Ex-tank / STS UAE - HFO 180 Cst, Quantity upto 50,000 MT / month - HFO 250 Cst, Quantity upto 40,000 MT / month - HFO 360 Cst, Quantity upto 50,000 MT/ month Price shall be Arab Platts plus/minus USD , depending upon the specs. Serious buyers may please contact us.
VIRGIN FUEL OIL D6 - LOW SULFUR - Minimum Quantity: 400,000,000 Gallons per Month Maximum Quantity: 800,000,000 Gallons per Month
EXPORT BLEND CRUDE (REBCO) GOST 51 858-2002 / GOST 9965-76 Minimum Quantity: 10,000 Barrels per Month Maximum Quantity: 3,000,000 Barrels per Month
AVIATION KEROSENE COLONIAL GRADE 54 JET FUEL - Minimum Quantity: 500,000 Barrels per Month Maximum Quantity: 5,000,000 Barrels per Month
Lubenz is an international lubricant brand that is functioned in types of lubricants such as industrial oils, Speciality oils, Marine oils, Agriculture, Machinaries lubricants, Motorcycle lubricants and Automotive lubricants fluids and all types of greases. We have more than 1000 commercial products, including lubricants, special fluids, and greases used for passenger vehicles, commercial vehicles, and industrial equipment. One of the notable advantages of our products is that they maintain excellent operational properties in a wide range of temperatures. We have an extensive network of distributors and strategic partnerships, which help promote our products in both local and international markets. At the global level, our presence is continuously expanding. LUBENZ Lubricants exports to more than 40 countries and has established foreign representative offices in the main key regions. AUTOMOTIVE Petrol Engine Oil Series SAE50, SAE60, SAE70, 0W20, 0W30 5W30, 10W40 , 15W40, 15W50 , 20W40 , 20W50, Diesel Engine oil Series SAE 50, 5W30, 10W30, 10W40, 15W40, 15W50 ,20W40 , 20W50. ATF Series ATF DEX II , DEX III , DEX VI, CVTF. Gear Oil Series SAE-API GL-5, SAE-140 API GL-4 AGRICULTURE OILS AGRI 10W-30 AGRI 15W-40 AGRI 10W-40 AGRI Power Transmission Oil 4 SAE 10 AGRI Power Transmission Oil 4 SAE 30 Hydraulic HVLP Series 15, 22, 32, 46 INDUSTRIAL Hydraulic Extreme Vibranium series ISO 32,ISO 46, ISO 68, ISO, ISO 100, ISO150, ISO 220. Heating Oil Extreme Vibranium series 10, 32, 68. Compressor Oil VDL Series 32,46, 68, 100, 150, 220, 320 Hydraulic HLP Series 32, 46, 86 , 320, 460 GREASES Grease Ca-EP series Grease Ca-MP series Grease HT-EP series Extreme Grease EP series Extreme Grease MP series Grease OG Graphite series Complex Grease Silicon Base Grease Sugar Mill Grease MARINE Marine Cylinder Oils Marine Engine Oils Marine System Oils MOTORCYCLE 4 Stroke SAE20W40 API SN 4 Stroke SAE 20W50 API SN / JASO MA2 2 stroke Engine Oil API TC / JASO SPECIALITY OIL Transformer oil. Brake fluid DOT 3, DOT 4. Coolant 40%, 50%, 100%. Thermic Fluid series. Rock Drill oil series Cutting Oils. Food Grade Grease and lube. HEAVY DUTY Heavy Duty 10W-40 Heavy Duty 15W-40 Heavy Duty 20W-50 E7 Heavy Duty SAE 50 Heavy Duty SAE 30 10W-40 Low SAPS Premium Heavy Duty Longlife 75W-80 SPECIALTY OILS Transformer Oils Spindle & Sewing Oils Rock Drill Oils Soluble Cutting Oils
Carbon
EQUINAS NBO 60u is a high-quality Naphthenic Base Oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment. Naphthenic base oil is a type of mineral oil that is produced through the refining of crude oil. It characterized by its composition of saturated cyclic hydrocarbons called naphthene. Naphthenic base oils are used in a wide range of applications, including automotive lubricants, transformer oils, metalworking fluids, rubber and tire manufacturing, and more. They are particularly well-suited for use in applications where low-temperature performance is critical, such as in hydraulic fluids, refrigeration oils, and compressor lubricants
EQUINAS 4 is a high-quality Group III base oil, highly isoparaffinic and exhibits a very high viscosity index as well as superior low-temperature performance. It has an excellent viscosity-volatility relationship. Applications: EQUINAS 4 is an excellent choice for formulating high-performance, low-viscosity engine oils due to its high viscosity index and low volatility. This base oil is also suitable for application in industrial equipment, such as compressors, hydraulic systems, gears and turbines. Features and Benefits: Very high viscosity index Excellent volatility for low-viscosity engine oils Superior low-temperature performance Good oxidation stability
EQUINAS 6 is a high-quality Group III base oil, highly isoparaffinic and exhibits a very high viscosity index as well as superior low-temperature performance. It has an excellent viscosity-volatility relationship. Applications: EQUINAS 6 is an excellent choice for formulating high performance, low-viscosity engine oils due to its high viscosity index and low volatility. This base oil is also suitable for application in industrial equipment, such as compressors, hydraulic systems, gears and turbines. Features and Benefits Very high viscosity index Excellent volatility for low-viscosity engine oils Superior low-temperature performance Good oxidation stability
EQUINAS 8 is a high-quality Group III base oil, manufactured from a unique feedstock by using a proprietary hydrotreatment and wax isomerization process and hydrofinished to a colourless liquid. The base oil is highly isoparaffinic and exhibits a very high viscosity index as well as superior low-temperature performance. It has an excellent viscosity-volatility relationship. Applications: EQUINAS 8 is an excellent choice for formulating high performance engine oils due to its high viscosity index and low volatility. This base oil is also suitable for application in industrial equipment, such as compressors, hydraulic systems, gears and turbines. Features and Benefits Very high viscosity index Excellent volatility for low-viscosity engine oils Superior low-temperature performance Good oxidation stability
