Steel products, steel pipe, fittings, flange, bathroom accessories, valve, steel tube
Please provide a quotation to the following requirement from importer -
Product Name: Rubber Inner Tube
Specifications :
Material: Butyl Rubber
Application: Large, Medium And Small Vehicles, Industrial Forklifts
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Constanta, Romania
Payment Terms : To be discussed with sellers
Looking for suppliers from : Worldwide
Contact : Cristian
Please provide a quotation to the following requirement from importer -
Product Name: Inner Tubes
Specification:
Material: Butyl Rubber
Use: Automotive
Color: Black
Packaging Terms : standard
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Romania
Payment Terms : LC/TT
Looking for suppliers from : Worldwide
Contact : Andre
The buyer would like to receive quotations for -
Product Name: Steel Wire Rod
Specifications :
Rolled Non-alloy Steel Wire For Cold Drawing C70d2 According To En 10016-4 - Size 5.5 Mm - Dimensional Tolerance: +/- 0.20 Mm - Monthly Consumption: 200 Tons - Oval: Max. 0.20 Mm - Chemical Composition (analysis On Liquid Steel): C: 0.68 - 0.72 % - Si: 0.10 – 0.30 % - Mn: 0.50 – 0.70 % - P: Max. 0.020 % - S: Max. 0.025 % - Cr: Max. 0.10 % - Ni: Max. 0.10 % - Mo: Max. 0.03% - Cu: Max. 0.15 % - Al: Max. 0.01 % - N: Max. 0.007 % Permissible Deviations For Chemical Analysis On The Product According To En 10016-4. Laminated Wire Must Not Have Surface Discontinuities With Depths Greater Than 0.15 Mm, Cracks, Overlaps, Chips, Burrs Or Impact Marks That May Influence Correct Use. The Rolled Wire Must Not Have Total Decarburization And The Partial Decarburization Must Not Exceed 0.10 Mm According To En 10016-1. The Microstructure Of The Wire, Resulting In The Rolling Process, Must Allow The Processing By Cold Drawing With A Total Reduction Of 90%. Delivery Method: The Wire Is Delivered On A Batch. The Number Of Batches On Delivery Must Be Limited As Much As Possible. Delivery Status: The Semi-finished Wire Must Be Delivered In The Raw Rolling State, In Coils With Continuous Wire Wrapped In Unarranged Coils, But Having The Possibility To Allow The Regular Winding During Subsequent Processes. The Coils Must Be Cut At Both Ends To Ensure The Supply Of Product With Uniform Shape And Properties. Marking: Each Delivered Coil Must Be Marked With The Following Information: - Wire Size - Symbolization Of The Steel Brand - Batch Number - Name / Symbol Of The Manufacturer. 2. Rolled Non-alloy Steel Wire For Cold Drawing C42d2 According To En 10016-4 - Size 5.5 Mm - Dimensional Tolerance: +/- 0.20 Mm - Monthly Consumption: 50 Tons - Oval: Max. 0.20 Mm - Chemical Composition (analysis On Liquid Steel): - C: 0.40 - 0.44 % - Si: 0.10 – 0.30 % - Mn: 0.50 – 0.70 % - P: Max. 0.020 % - S: Max. 0.025 % - Cr: Max. 0.10 % - Ni: Max. 0.10 % - Mo: Max. 0.03% - Cu: Max. 0.15 % - Al: Max. 0.01 % - N: Max. 0.007 % Permissible Deviations For Chemical Analysis On The Product According To En 10016-4. Laminated Wire Must Not Have Surface Discontinuities With Depths Greater Than 0.15 Mm, Cracks, Overlaps, Chips, Burrs Or Impact Marks That May Influence Correct Use. The Rolled Wire Must Not Have Total Decarburization And The Partial Decarburization Must Not Exceed 0.10 Mm According To En 10016-1. The Microstructure Of The Wire, Resulting In The Rolling Process, Must Allow The Processing By Cold Drawing With A Total Reduction Of 90%. Delivery Method: The Wire Is Delivered On A Batch. The Number Of Batches On Delivery Must Be Limited As Much As Possible. Delivery Status: The Semi-finished Wire Must Be Delivered In The Raw Rolling State, In Coils With Continuous Wire Wrapped In Unarranged Coils, But Having The Possibility To Allow The Regular Winding During Subsequent Processes. The Coils Must Be Cut At Both Ends To Ensure The Supply Of Product With Uniform Shape And Properties. Marking: Each Delivered Coil Must Be Marked With The Following Information: - Wire Size - Symbolization Of The Steel Brand - Batch Number - Name / Symbol Of The Manufacturer
Quantity Required : 250 Ton/Tons
Shipping Terms : DAP
Destination Port : Baia Mare,
Payment Terms : L/C
Looking for suppliers from : Europe
Contact : Rares Valean
The buyer would like to receive quotations for -
Product Name: Steel Plate Sheet
Specifications:
Lamiere Hrp
Quality Size (MM)
Th W L
S355J2+N 10 2500 12000
S355J2+N 12 2500 12000
S355J2+N 15 2500 12000
S355J2+N 20 2500 12000
S355J2+N 25 2500 12000
S355J2+N 30 2500 12000
S355J2+N 40 2500 12000
S355J2+N 50 2500 12000
S355J2+N 60 2500 12000
Plate HRP
Quality Size (MM)
Th W L
S275JR+AR 10 2500 12000
S275JR+AR 12 2500 12000
S275JR+AR 15 2500 12000
S275JR+AR 20 2500 12000
S275JR+AR 25 2500 12000
S275JR+AR 30 2500 12000
S275JR+AR 40 2500 12000
S275JR+AR 50 2500 12000
S275JR+AR 60 2500 12000'
Qty: 100.000 Tons
Quantity Required : 100000 Ton/Tons
Shipping Terms : CIF
Destination Port : Qatar
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Andrei Zaharia
Sms nowoven fabric, woven fabric, nowoven fabric, coated fabric, cord fabric, agrotextiles, geotextiles, construction textiles, industrial felt, industrial blanket, medical textiles, packaging textils, rope textiles, filtration textile, steel pipe, steel tube, stainless, pipe fitting, flange, elbow, reducer, tee, valve, steel accessories, round pipe, rectangle pipe, galvanized pipe, square pipe, welded pipe, seamless pipe.
Buyer is interested to receive quotations for the following RFQ -
Product Name: TPU or soft PVC Lay Flat Hose Tube For Internal Structures Of The Inflatable Tents
Specifications :
Customized Size
Quantity: For start we need to make test so we need at least 100m For the future we need 300 to 500 m per month
Quantity Required : 100 Meter/Meters
Shipping Terms : CIF
Destination Port : Romania
Payment Terms : LC or TT
Looking for suppliers from : Worldwide
Contact : Vlad Iosif/Lazar Razvan
Buyer is interested to receive quotations for the following RFQ -
Product Name: TPU Or Soft PVC Lay Flat Hose Tube
Specifications :
TPU or soft PVC lay flat hose tube for internal structures of the inflatable tents
Customized Size
Quantity: For start we need to make test so we need at least 100m For the future we need 300 to 500 m per month
Quantity Required : 300 - 500 Meter/Meters
Shipping Terms : CIF/FOB
Destination Port : Romania, Romania
Payment Terms : LC/TT
Looking for suppliers from : Worldwide
Contact : Vlad Iosif/Lazar Razvan
Please provide a quotation to the following requirement from importer -
Product Name: Steel Embossed Plates
Specifications :
- Steel S235 (Black Steel) Embossed Sheets Having The Size As Under:
- 3mm Thick, 2000mm Width, 6000mm Length
Quantity Required : 212 Piece/Pieces
Shipping Terms : CIF
Destination Port : Romania
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Liliana Raducanu
Buyer is interested to receive quotations for the following RFQ -
Product Name: Steel Billet
Specifications :
Billet Diameter: F100mm ~ F300mm. Billet Size Deviation Should Be In Accordance With Table
Table 1
Length Delivery By Contract, The Length Tolerance Is 0~+60mm
Diameter Tolerance ±1.3% * D
Out-of-roundness Do Not Avoid The Flat Areas =4.5%*d
Avoid Flat Areas =2.5%*d
Straightness The Partial Straightness Is Not Greater Than 4 Mm/m And The Total
Straightness Is No More Than 0.4% Of The Total Length
Quantity Required : 30000 Metric Ton/Metric Tons
Shipping Terms : CIF
Destination Port : China
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Tanase Mina
The buyer would like to receive quotations for -
Product Name: Reinforcing Steel Rebar
Specifications :
BST500, PC52 And OB37
Note: The Goods Must Have European CE
Quantity Required : 1000 Ton/Tons
Shipping Terms : CIF
Destination Port : Romania
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Florea Gheorghe
Please provide a quotation to the following requirement from importer -
Product Name: Steel Billets
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Romania
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Grecea Cristina
Buyer is interested to receive quotations for the following RFQ -
Product Name: Steel Rebars
Specifications :
Rebars / SAE 1006-1008
Diameters: 8,10,12,14,16,18,20,22,25
Length: 12 Meters
Packaging Terms : Standard
Quantity Required : 1000 Ton/Tons
Shipping Terms : CIF Or FOB
Destination Port : Turkey, Romania
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Vasile Tamba
The buyer is interested to receive quotations for the following RFQ -
Product Name: Steel Pipes
Specifications:
Material: Steel
Type: Galvanized
Quantity Required : 1 Twenty-Foot Container(sample)
Shipping Terms : CIF
Destination Port : Romania
Payment Terms : To be discussed with suppliers
Looking for suppliers from : Worldwide
Contact : Andre
Please provide a quotation to the following requirement from importer -
Product Name: Steel Rebar
Specifications :
Monthly Rebar With Sizes 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 25mm, 28mm And 32mm
Quantity Required : 2200 Ton/Tons Monthly
Shipping Terms : CIF
Destination Port : Romania
Payment Terms : To be discussed with suppliers
Looking for suppliers from : Worldwide
Contact : Ionut Ion
Please quote for the following wholesale product requirement -
Product Name: Steel Bars
Specifications:
Type : b500c
Quantity Required : 4000 Ton/Tons
Shipping Terms : CIF
Destination Port : Romania
Payment Terms : LC/Bank Transfer
Looking for suppliers from : Worldwide
Contact : Andrei Balint Balint
The buyer would like to receive quotations for -
Product Name: Steel Bars
Specifications :
1. Steel Bar 25mm, 100 Ton
2. Steel Bar 12mm, 60 Tons
3. Steel Bar 16mm, 30 Tons
4. Steel Bars 8mm, 10 Tons
Quantity Required : 10 - 100 Ton/Tons
Shipping Terms : CIF
Destination Port : Bucharest, Romania
Payment Terms : L/C
Looking for suppliers from : Bulgaria, Turkey
Contact : Younis
Please quote for the following wholesale product requirement -
Product Name: Steel Scrap
Specifications :
Stainless Steel Made From Scrap
Classification: SS 304 & SS316
Quantity Required : 110 Metric Ton/Metric Tons
Shipping Terms : CIF
Destination Port : Genova Port,, Italy
Payment Terms : No Advanced Deposit 100% LC Payment At Loading Port Upon Receipt Of Of Sgs And Shipping/export Documents
Looking for suppliers from : Europe
Contact : Gabe
Please quote for the following wholesale product requirement -
Product Name: Steel Rebar
Specifications :
The buyer is interested in buying steel rebar with the following specifications:
8 mm - 1000 tons
10 mm - 1200 tons
12 mm - 1200 tons
16 mm - 1500 tons
18 mm - 1700 tons
20 mm - 2600 tons.
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Romania
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Victoria David
