The buyer would like to receive quotations for -
Product Name: Steel Wire Rod
Specifications :
Rolled Non-alloy Steel Wire For Cold Drawing C70d2 According To En 10016-4 - Size 5.5 Mm - Dimensional Tolerance: +/- 0.20 Mm - Monthly Consumption: 200 Tons - Oval: Max. 0.20 Mm - Chemical Composition (analysis On Liquid Steel): C: 0.68 - 0.72 % - Si: 0.10 – 0.30 % - Mn: 0.50 – 0.70 % - P: Max. 0.020 % - S: Max. 0.025 % - Cr: Max. 0.10 % - Ni: Max. 0.10 % - Mo: Max. 0.03% - Cu: Max. 0.15 % - Al: Max. 0.01 % - N: Max. 0.007 % Permissible Deviations For Chemical Analysis On The Product According To En 10016-4. Laminated Wire Must Not Have Surface Discontinuities With Depths Greater Than 0.15 Mm, Cracks, Overlaps, Chips, Burrs Or Impact Marks That May Influence Correct Use. The Rolled Wire Must Not Have Total Decarburization And The Partial Decarburization Must Not Exceed 0.10 Mm According To En 10016-1. The Microstructure Of The Wire, Resulting In The Rolling Process, Must Allow The Processing By Cold Drawing With A Total Reduction Of 90%. Delivery Method: The Wire Is Delivered On A Batch. The Number Of Batches On Delivery Must Be Limited As Much As Possible. Delivery Status: The Semi-finished Wire Must Be Delivered In The Raw Rolling State, In Coils With Continuous Wire Wrapped In Unarranged Coils, But Having The Possibility To Allow The Regular Winding During Subsequent Processes. The Coils Must Be Cut At Both Ends To Ensure The Supply Of Product With Uniform Shape And Properties. Marking: Each Delivered Coil Must Be Marked With The Following Information: - Wire Size - Symbolization Of The Steel Brand - Batch Number - Name / Symbol Of The Manufacturer. 2. Rolled Non-alloy Steel Wire For Cold Drawing C42d2 According To En 10016-4 - Size 5.5 Mm - Dimensional Tolerance: +/- 0.20 Mm - Monthly Consumption: 50 Tons - Oval: Max. 0.20 Mm - Chemical Composition (analysis On Liquid Steel): - C: 0.40 - 0.44 % - Si: 0.10 – 0.30 % - Mn: 0.50 – 0.70 % - P: Max. 0.020 % - S: Max. 0.025 % - Cr: Max. 0.10 % - Ni: Max. 0.10 % - Mo: Max. 0.03% - Cu: Max. 0.15 % - Al: Max. 0.01 % - N: Max. 0.007 % Permissible Deviations For Chemical Analysis On The Product According To En 10016-4. Laminated Wire Must Not Have Surface Discontinuities With Depths Greater Than 0.15 Mm, Cracks, Overlaps, Chips, Burrs Or Impact Marks That May Influence Correct Use. The Rolled Wire Must Not Have Total Decarburization And The Partial Decarburization Must Not Exceed 0.10 Mm According To En 10016-1. The Microstructure Of The Wire, Resulting In The Rolling Process, Must Allow The Processing By Cold Drawing With A Total Reduction Of 90%. Delivery Method: The Wire Is Delivered On A Batch. The Number Of Batches On Delivery Must Be Limited As Much As Possible. Delivery Status: The Semi-finished Wire Must Be Delivered In The Raw Rolling State, In Coils With Continuous Wire Wrapped In Unarranged Coils, But Having The Possibility To Allow The Regular Winding During Subsequent Processes. The Coils Must Be Cut At Both Ends To Ensure The Supply Of Product With Uniform Shape And Properties. Marking: Each Delivered Coil Must Be Marked With The Following Information: - Wire Size - Symbolization Of The Steel Brand - Batch Number - Name / Symbol Of The Manufacturer
Quantity Required : 250 Ton/Tons
Shipping Terms : DAP
Destination Port : Baia Mare,
Payment Terms : L/C
Looking for suppliers from : Europe
Contact : Rares Valean
Please provide a quotation to the following requirement from importer -
Product Name: Anodizing Bars And Rods
Specifications:
Type Anodizing Aluminum
Material Aluminum
All sizes (As per current project) , Standard
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : FOB
Destination Port : Romania
Payment Terms : To be discussed with suppliers
Looking for suppliers from : Worldwide
Contact : Christina
The buyer would like to receive quotations for -
Product Name : Clutches & Brakes
Specifications :
Like: Clutches, Brakes, Clutch Brake Unit
Material: Steel, etc.
Size: Different
Use: Automotive
Quantity Required : 1 Less than Container Load/LCL
Shipping Terms : DAP
Destination Port : Romania
Payment Terms : DP
Looking for suppliers from : Worldwide
Contact : Cosmin
Buyer is interested to receive quotations for the following RFQ -
Product Name: Anodizing Bars And Rods
Specifications:
Material Aluminum
All sizes (As per current project)
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : FOB
Destination Port : Romania
Payment Terms : TT , LC
Looking for suppliers from : Worldwide
Contact : Christina
The buyer would like to receive quotations for -
Product Name: Steel Plate Sheet
Specifications:
Lamiere Hrp
Quality Size (MM)
Th W L
S355J2+N 10 2500 12000
S355J2+N 12 2500 12000
S355J2+N 15 2500 12000
S355J2+N 20 2500 12000
S355J2+N 25 2500 12000
S355J2+N 30 2500 12000
S355J2+N 40 2500 12000
S355J2+N 50 2500 12000
S355J2+N 60 2500 12000
Plate HRP
Quality Size (MM)
Th W L
S275JR+AR 10 2500 12000
S275JR+AR 12 2500 12000
S275JR+AR 15 2500 12000
S275JR+AR 20 2500 12000
S275JR+AR 25 2500 12000
S275JR+AR 30 2500 12000
S275JR+AR 40 2500 12000
S275JR+AR 50 2500 12000
S275JR+AR 60 2500 12000'
Qty: 100.000 Tons
Quantity Required : 100000 Ton/Tons
Shipping Terms : CIF
Destination Port : Qatar
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Andrei Zaharia
Please provide a quotation to the following requirement from importer -
Product Name: Protection Items or Equipment's
Specifications:
Type: Rope, Lanyard, Helmets etc.
Use : Safety & Protection
Packaging Terms : standard
Quantity Required : 500 Piece/Pieces
Shipping Terms : FOB
Destination Port : Romania
Payment Terms : LC/TT
Looking for suppliers from : Worldwide
Contact : Leise/Danial / Tonya
Please quote for the following wholesale product requirement -
Product Name: Fasteners
Specifications :
Type: Nuts, Bolts, Washers
Material SS, Carbon Steel, Brass
All Different Grade
Quantity Required : MOQ
Shipping Terms : FOB
Destination Port : Romania
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Dan
The buyer is interested to receive quotations for the following RFQ -
Product Name: Fasteners
Specifications:
Type: Screws, Bolts, Nuts, Washer, Gaskets, Etc.
Material: Steel, Stainless Steel, Brass, Etc.
Use: Industrial
Size: Standard & Customized
Quantity Required : MOQ
Shipping Terms : DDP
Destination Port : Bucharest, Romania
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Alma Bljan
Buyer is interested to receive quotations for the following RFQ -
Product Name: Fasteners
Specifications :
Type: Nuts, Screws, Bolts
Material: Stainless Steel, Carbon Alloy, Carbon Steel, Etc.
Size: Standard
Use: Industrial
Packaging Terms : Standard
Shipping Terms : Ex-Work
Destination Port : Romania, Romania
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Mariana
The buyer would like to receive quotations for -
Product Name: Fasteners
Specifications :
Use: Industrial
Type: Nuts, Bolts, Screws, Etc.
Material: Brass, Metal, Alloy, Steel
Size: Customized
Use: Industrial
Packaging Terms : Standard
Quantity Required : 100 - 500 Piece/Pieces(sample)
Shipping Terms : FOB Or CIF
Destination Port : Romania
Payment Terms : T/T
Looking for suppliers from : Worldwide
Contact : Sorin Ignat
Please provide a quotation to the following requirement from importer -
Product Name: Fasteners
Specifications :
Type: Nuts, Bolts, Screws
Material: Brass, Steel, Alloy
Size: Customize
Use: Industrial
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : FOB
Destination Port : Romania
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Mariana
Please quote for the following wholesale product requirement -
Product Name: Fasteners
Specifications:
Use: Industrial
Type: Nuts, Bolts, Screws, Etc.
Material: Brass, Metal, Alloy, Steel
Size: Customized
Use: Industrial
Quantity Required : 100 - 500 Piece/Pieces(sample)
Shipping Terms : FOB Or CIF
Destination Port : Romania
Payment Terms : T/T
Looking for suppliers from : Worldwide
Contact : Sorin Ignat
Buyer is interested to receive quotations for the following RFQ -
Product Name: Fasteners
Specifications :
Type: Nuts, Screws, Bolts
Material: Stainless Steel, Carbon Alloy, Carbon Steel, Etc.
Size: Standard
Quantity Required : 1 MOQ
Shipping Terms : FOB/EXW
Destination Port : Romania, Romania
Payment Terms : To be discussed with suppliers
Looking for suppliers from : Worldwide
Contact : Cloudia/Ms. Michela
Please provide a quotation to the following requirement from importer -
Product Name: Fasteners
Specifications :
Type: Screws, Bolts, Nuts
All Sizes
Quantity Required : MOQ
Shipping Terms : FOB
Destination Port : Romania
Payment Terms : To be discussed with sellers
Looking for suppliers from : Worldwide
Contact : Bala
Please provide a quotation to the following requirement from importer -
Product Name: Fasteners
Specifications :
Type: Nuts, Screws, Bolts
Material: Stainless Steel, Carbon Alloy, Carbon Steel, Etc.
Size: Standard
Quantity Required : MOQ
Shipping Terms : FOB Or Ex-Work
Destination Port : Romania
Payment Terms : To be discussed with sellers
Looking for suppliers from : Worldwide
Contact : Cloudia
Please provide a quotation to the following requirement from importer -
Product Name: Fasteners
Specifications :
Type: Nuts, Screws, Bolts
Material: Stainless Steel, Carbon Alloy, Carbon Steel, Etc.
Quantity Required : MOQ
Shipping Terms : FOB Or Ex-Work
Destination Port : Romania
Payment Terms : To be discussed with sellers
Looking for suppliers from : Worldwide
Contact : Cloudia
Please quote for the following wholesale product requirement -
Product Name: Thermal Paper Roll
Specifications :
Rolls Form
Use For Commercial Cashiers
Shipping Terms : FOB
Destination Port : Romania
Payment Terms : T/T
Looking for suppliers from : Worldwide
Contact : Seraten
The buyer would like to receive quotations for -
Product Name: Used Tyres
Specifications:
- Retreated Tyres
Quantity Required : 1 Twenty-Foot Container(sample)
Shipping Terms : CIF
Destination Port : Romania
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Andrei
Buyer is interested to receive quotations for the following RFQ -
Product Name: Conveyor Belt
Specifications :
Material: Rubber
Size: Standard, Customized
Quantity Required : MOQ
Shipping Terms : DDP
Destination Port : Bucharest, Romania
Payment Terms : Bank Transfer 60 Days
Looking for suppliers from : Worldwide
Contact : Alma Bljan
Buyer is interested to receive quotations for the following RFQ -
Product Name: Refined Glycerine
Quantity Required : 15 Metric Ton/Metric Tons
Shipping Terms : CIF
Destination Port : Romania
Payment Terms : L/C Or T/T
Looking for suppliers from : Worldwide
Contact : Alex Teianu
