Please quote for the following wholesale product requirement -
Product Name: Blockboards
Specifications:
3 layer panel product.
[material and dimensions]
The front and rear outer layers need to be 5mm thick solid cherry(American cherry), and the core is 9-12mm thick plywood(made in low hardness wood like poplar or spruce). So, the total thickness of the panel would be 19 - 22mm. For the width and length, they are 1220*1220mm.
We want both the front and rear cherry layers to be;
[cherry board grade]
- a premium grade with no knots or other imperfections
- straight grains most preferred, and curly grains to be avoided.
- surface to be sanded smooth.
[cherry board size and orientation]
- wide cherry boards to be used to have the minimum glue lines(8 cherry boards at most on each side of the panel, and fewer than 8 would be great).
- continous stave(no cherry boards are joined lengthwise)
- cherry boards are oriented in the same direction between the front and the rear of the panel.
[glue for cherry boards]
- polyurethane glue preferred, D4. If you have a better alternative, please advise. The dried glue needs to be less hard than the surrounding cherry wood.
- Please note that in our use of the panel, it can be in contact with water often, for hours each time.
- Surfaces to be glued need to be fully covered with glue, without missing any part resulting in dry joint, so that water does not penetrate in such a dry joint and split the joint.
- light tight between adjoining boards when glue is not applied yet(You cannot see light come through from the opposite side, meaning all board edges are very straight. Once the boards are glue joined, the glue line is almost invisible.)
Quantity : 20 foot container load for the initial purchase
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Sydney, Australia
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Steve Bae
Please quote for the following wholesale product requirement -
Product; FSC certified MDF Board
Specifications:
of 3, 6,9, 12,16, 18 & 25mm.
Note: Please share Density, HSS code and TDS
Qty: MOQ
Quantity Required : MOQ
Shipping Terms : FOB
Payment Terms : LC at sight
Looking for suppliers from : Worldwide
Contact : Md. Mongur Hossain
Please provide a quotation to the following requirement from importer -
Product: Coated And Uncoated MDF Boards
Specifications:
ROW MDF ------ 2.44 1.22 16.5 mm 750 E2 3
Lament MDF White 2.80 2.07 18 mm 750 E2 1
Lament MDF colors 2.80 2.07 18 mm 750 E2 1 container
Qty: As above
Packaging Terms : 2 protection boards one in the top and one in the bottom covered with nylon all pallet is surrounded MDFsides and strapped with steel band.
Quantity Required : 5 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Alexandria Port, Egypt
Payment Terms : LC
Looking for suppliers from : Romania
Contact : Eng Abdelnasser Taha Mohamed
Please quote for the following wholesale product requirement -
Product : Bamboo Frame
Specifications:
Use : Bamboo Frame For Hamper
Quantity : MOQ) 1000 pieces per month
Quantity Required : MOQ
Shipping Terms : By Road
Destination Port : Pakistan
Payment Terms : Bank Transfer
Looking for suppliers from : Pakistan
Contact : Urooj Fatima
Buyer is interested to receive quotations for the following RFQ -
Product Name: Groved Treated Plywood
Specifications:
Packaging Term: Customized
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF, FOB
Destination Port : Jamaica
Payment Terms : LC, TT
Looking for suppliers from : Worldwide
Contact : Noel Johnson
Please provide a quotation to the following requirement from importer -
Product Name: MDF Board
Specifications :
2.5mm, 6mm, 8mm, 11mm , 17mm, 18mm ( Upto 18mm)
As Per Standard Density , No Bad Smells No Dark Mark
Quantity Required : 2 - 3 Forty-Foot Container
Shipping Terms : CIF
Destination Port : Dammam, Saudi Arabia
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Robi Alislam
The buyer would like to receive quotations for -
Product Name: Bamboo Stick, Bamboo Bunch, Bamboo Stem
Specifications :
Quantity: 50 Cartons
Later On MOQ
Quantity Required : 50 Carton/Cartons
Shipping Terms : CIF
Destination Port : Jedaah, Saudi Arabia
Payment Terms : Bank Transfer
Looking for suppliers from : Thailand
Contact : Mufeedh Kk
Buyer is interested to receive quotations for the following RFQ -
Product: Gurjan Veneer Top Grade
Specifications:
Qty: 1-2 Tons Initially Later On Depends
Quantity Required : 1 - 2 Ton/Tons
Shipping Terms : CIF
Destination Port : Bangladesh
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Mubashir
The buyer would like to receive quotations for -
Product Name: MDF Or HDF Board
Specifications :
1.5mm MDF/HDF
Packaging Terms : Based on our standard
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : FOB
Destination Port : Kobe, Japan
Payment Terms : T/T
Looking for suppliers from : Worldwide
Contact : Kazunori Hanahata
Please provide a quotation to the following requirement from importer -
Name: Wood-Free Bleached Chemical Pulp (BCP) Sheet
Quantity: 500 ADMT (±10%)
Delivery Basis: CFR Chattogram Sea Port, Bangladesh.
Key Technical Specifications:
Freeness (SR): 40–50
Breaking Length: =4000 meters
Tear Factor: =66
Brightness: =84% ISO
Ash Content: =0.3% (w/w)
Moisture: =10% (105–110°C)
Free of foreign materials (lumps, stones, plastic, silica, etc.).
Slab-type pulp not accepted.
Packing Requirements:
180–200 kg net per bale, wrapped in pulp sheet and secured with =3 baling wires.
Bales must be un-unitized if shipped in containers.
Serial numbering on two sides of each bale.
Break bulk shipment preferred (8 bales per unit).
Documentation:
Manufacturer’s original technical literature/brochure (English).
Specification Compliance Sheet confirming alignment with tender requirements.
Country of Origin & Port of Shipment (preferably the same).
Shipment:
Delivery within 60 days of L/C opening.
Quotation Requirements
Please provide the following in your response:
Quantity Required : 500 Metric Ton/Metric Tons
Shipping Terms : CFR
Destination Port : Chattogram Port, Bangladesh
Payment Terms : Delivery within 60 days of L/C opening.
Looking for suppliers from : Worldwide
Contact : Ferdous Ahmad
Please provide a quotation to the following requirement from importer -
Name: Wood-Free Bleached Chemical Pulp (BCP) Sheet
Specifications:
Key Technical Specifications:
Freeness (SR): 40–50
Breaking Length: =4000 meters
Tear Factor: =66
Brightness: =84% ISO
Ash Content: =0.3% (w/w)
Moisture: =10% (105–110°C)
Free of foreign materials (lumps, stones, plastic, silica, etc.).
Slab-type pulp not accepted.
Packing Requirements:
180–200 kg net per bale, wrapped in pulp sheet and secured with =3 baling wires.
Bales must be un-unitized if shipped in containers.
Serial numbering on two sides of each bale.
Break bulk shipment preferred (8 bales per unit).
Documentation:
Manufacturer’s original technical literature/brochure (English).
Specification Compliance Sheet confirming alignment with tender requirements.
Country of Origin & Port of Shipment (preferably the same).
Shipment:
Delivery within 60 days of L/C opening.
Quotation Requirements
Please provide the following in your response:
Quantity: 500 ADMT (±10%)
Validity Period: Minimum 90 days.
Compliance Statement: Confirmation of adherence to all technical specs.
Manufacturer’s Certificate & Brochure: Attach PDF copies.
Production Lead Time & Shipment Schedule.
Quantity Required : 500 Metric Ton/Metric Tons
Shipping Terms : CFR
Destination Port : Chattogram Sea Port,, Bangladesh
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Ferdous Ahmad
Please quote for the following wholesale product requirement -
Product Name: Edge Board
Specifications:
Certificated Best Quality Paper Angle Bead L Shape Pallet Carton edge board paper corner protector with notch
Quantity Required : 50000 Piece/Pieces
Shipping Terms : CIF
Destination Port : Saudi Arabia
Payment Terms : 30% Deposit + Balance 70% through Bank
Looking for suppliers from : Worldwide
Contact : Eslam Moustafa
Please provide a quotation to the following requirement from importer -
Product Name: Wood Chips
Specifications :
Wood Chips Should Be Of Deciduous Trees ( With Leaves)
Pine Or Trees Producing Resin Are Not Accepted
Chip Size To Be 1-8mm
Quantity Required : 500 Metric Ton/Metric Tons Monthly
Shipping Terms : CIF
Destination Port : Kuwait
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Fahim Amer
Please quote for the following wholesale product requirement -
Product : Swan Timber Logs
Specifications:
Quantity:
200 Cubic Meter/Cubic Meters
from Africa
cif Bangladesh
Quantity Required : 200 Cubic Meter/Cubic Meters
Shipping Terms : CIF
Destination Port : Bangladesh
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Darshil Morningstar
Please provide a quotation to the following requirement from importer -
Product: Sonokeling/ Rosewood
Specifications:
Afzelia Xylay And Rosewood/ Sonokeling
Size In Cantimetres :
3/5/15 cm - 5 pieces
8/18/60 cm - 5 pieces
8/20/90 cm - 5 pieces
Qty: MOQ
Note: Need Samples
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Bulgaria
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Stoicho Popov
Please provide a quotation to the following requirement from importer -
Product Name: Acacia Wood Chips
Specifications :
For Paper Raw Material
Quantity Required : 1000 Metric Ton/Metric Tons
Shipping Terms : CIF
Destination Port : Indonesia
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Rizky Permana
Buyer is interested to receive quotations for the following RFQ -
Product Name: Spruce Wood
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : India
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Yatharth
Buyer is interested to receive quotations for the following RFQ -
Product Name: Eucalyptus Logs
Specifications :
In Container
10-20cm Logs In Any Length Over 3m
20-40cm Logs In Any Length Over 3m
Quantity Required : 5 Forty-Foot Container
Shipping Terms : CIF
Destination Port : Port Mundra, India
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Hafiz Khan
Please provide a quotation to the following requirement from importer -
Product: Sandal Wood
Specifications:
Sandalum Albem, Spicatum, Lancelota
Qty: 50 tons per month
Quantity Required : 50 Ton/Tons
Shipping Terms : CIF
Destination Port : United Arab Emirates
Payment Terms : Bank Transfer
Looking for suppliers from : Mauritius
Contact : Venkat
Buyer is interested to receive quotations for the following RFQ -
Product Name: Wood Shavings
Specifications :
Spec: Pine Wood Shavings & Mis Wood Shavings
Quantity Required : 1 Forty-Foot Container
Shipping Terms : CIF
Destination Port : Sri Lanka
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Rohitha Gamage
