The buyer would like to receive quotations for -
Product Name: Steel Wire Rod
Specifications :
Rolled Non-alloy Steel Wire For Cold Drawing C70d2 According To En 10016-4 - Size 5.5 Mm - Dimensional Tolerance: +/- 0.20 Mm - Monthly Consumption: 200 Tons - Oval: Max. 0.20 Mm - Chemical Composition (analysis On Liquid Steel): C: 0.68 - 0.72 % - Si: 0.10 – 0.30 % - Mn: 0.50 – 0.70 % - P: Max. 0.020 % - S: Max. 0.025 % - Cr: Max. 0.10 % - Ni: Max. 0.10 % - Mo: Max. 0.03% - Cu: Max. 0.15 % - Al: Max. 0.01 % - N: Max. 0.007 % Permissible Deviations For Chemical Analysis On The Product According To En 10016-4. Laminated Wire Must Not Have Surface Discontinuities With Depths Greater Than 0.15 Mm, Cracks, Overlaps, Chips, Burrs Or Impact Marks That May Influence Correct Use. The Rolled Wire Must Not Have Total Decarburization And The Partial Decarburization Must Not Exceed 0.10 Mm According To En 10016-1. The Microstructure Of The Wire, Resulting In The Rolling Process, Must Allow The Processing By Cold Drawing With A Total Reduction Of 90%. Delivery Method: The Wire Is Delivered On A Batch. The Number Of Batches On Delivery Must Be Limited As Much As Possible. Delivery Status: The Semi-finished Wire Must Be Delivered In The Raw Rolling State, In Coils With Continuous Wire Wrapped In Unarranged Coils, But Having The Possibility To Allow The Regular Winding During Subsequent Processes. The Coils Must Be Cut At Both Ends To Ensure The Supply Of Product With Uniform Shape And Properties. Marking: Each Delivered Coil Must Be Marked With The Following Information: - Wire Size - Symbolization Of The Steel Brand - Batch Number - Name / Symbol Of The Manufacturer. 2. Rolled Non-alloy Steel Wire For Cold Drawing C42d2 According To En 10016-4 - Size 5.5 Mm - Dimensional Tolerance: +/- 0.20 Mm - Monthly Consumption: 50 Tons - Oval: Max. 0.20 Mm - Chemical Composition (analysis On Liquid Steel): - C: 0.40 - 0.44 % - Si: 0.10 – 0.30 % - Mn: 0.50 – 0.70 % - P: Max. 0.020 % - S: Max. 0.025 % - Cr: Max. 0.10 % - Ni: Max. 0.10 % - Mo: Max. 0.03% - Cu: Max. 0.15 % - Al: Max. 0.01 % - N: Max. 0.007 % Permissible Deviations For Chemical Analysis On The Product According To En 10016-4. Laminated Wire Must Not Have Surface Discontinuities With Depths Greater Than 0.15 Mm, Cracks, Overlaps, Chips, Burrs Or Impact Marks That May Influence Correct Use. The Rolled Wire Must Not Have Total Decarburization And The Partial Decarburization Must Not Exceed 0.10 Mm According To En 10016-1. The Microstructure Of The Wire, Resulting In The Rolling Process, Must Allow The Processing By Cold Drawing With A Total Reduction Of 90%. Delivery Method: The Wire Is Delivered On A Batch. The Number Of Batches On Delivery Must Be Limited As Much As Possible. Delivery Status: The Semi-finished Wire Must Be Delivered In The Raw Rolling State, In Coils With Continuous Wire Wrapped In Unarranged Coils, But Having The Possibility To Allow The Regular Winding During Subsequent Processes. The Coils Must Be Cut At Both Ends To Ensure The Supply Of Product With Uniform Shape And Properties. Marking: Each Delivered Coil Must Be Marked With The Following Information: - Wire Size - Symbolization Of The Steel Brand - Batch Number - Name / Symbol Of The Manufacturer
Quantity Required : 250 Ton/Tons
Shipping Terms : DAP
Destination Port : Baia Mare,
Payment Terms : L/C
Looking for suppliers from : Europe
Contact : Rares Valean
Please provide a quotation to the following requirement from importer -
Product Name: Steel Product
Specifications :
Type: Steel Wire, Steel Profile, Steel Sheet, Etc.
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Singapore
Payment Terms : To be discussed with sellers
Looking for suppliers from : Worldwide
Contact : Mencast
Please quote for the following wholesale product requirement -
Product Name: Steel Wire Coils
Specifications :
SEA :1008 /
Grade : 60 /
Size : 5mm/6mm/8mm
Quantity Required : 112 Ton/Tons
Shipping Terms : To be discussed with suppliers
Destination Port : Jordan
Payment Terms : LC
Looking for suppliers from : Egypt
Contact : Salma
Buyer is interested to receive quotations for the following RFQ -
Product Name: Steel Wire Rods
Specifications :
PC strand 12.7 ASMT A416
150 tones every month
Quote Via Email
Quantity Required : 150 Ton/Tons Monthly
Shipping Terms : CIF/CFR/FOB
Destination Port : Sohar, Oman
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Naveen Viswanathan
Please quote for the following wholesale product requirement -
Product Name: Steel Wire Rods
.Specifications :
1860 MpaNOT Galvanized Nor Stainless Steel
Quantity Required : 10000 Meter/Meters
Shipping Terms : CIF
Destination Port : Port Of La Guaira, Venezuela
Payment Terms : L/C
Looking for suppliers from : United States
Contact : Arnie Hernandez
Please quote for the following wholesale product requirement -
Product Name: Galvanized Steel
Specifications:
Profile we used:100x40x1.5 (needs 800m)50x30x1.5 (needs 3600m)40x30x1.5 (needs 3450m) The company has to be able to cut, drill, weld
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Spain
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Henri Costa
Please quote for the following wholesale product requirement -
Product Name: Steel Wire Rods
Specifications :
Type: Galvanized
Quantity Required : 1000 Pound/Pounds
Shipping Terms : CIF
Destination Port : Jordan
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Ramzi Saba
Please quote for the following wholesale product requirement -
Product : Low Carbon Steel Wire Rod
Specifications:
Grade : SAE1008B (Boron min 0.00080%)
Sizes: 5.5 mm, 6.5 mm
Quantity : 300 metric tons
Quantity Required : 300 Metric Ton/Metric Tons
Shipping Terms : CIF
Destination Port : Bangkok,, Thailand
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Praveen Gupta
Please provide a quotation to the following requirement from importer -
Product Name: SAE1008 Wire Rolling
Specifications :
Material: Steel
Quantity Required : 100 Ton/Tons
Shipping Terms : CIF
Destination Port : Port Sohar, Oman
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Faisal Alhadi
Please quote for the following wholesale product requirement -
Product Name: Stainless Steel Wire Mesh
Specifications :
Grade: 904
Quantity Required : 20 Square Meter/Square Meters(sample)
Shipping Terms : CIF
Destination Port : Spain
Payment Terms : T/T
Looking for suppliers from : Worldwide
Contact : Victor Olmos
Please provide a quotation to the following requirement from importer -
Product Name: Stainless Steel Mesh Wire Screen
Specifications:
316 material
widht 1.2 mm
lenght 1 m
thickness 4 mm
Quantity : initially 8 units of 50 meters Rolls
Quantity Required : 8 Unit/Units(sample)
Shipping Terms : CIF
Destination Port : Dammam, Saudi Arabia
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Mr. Irshad
The buyer would like to receive quotations for -
Product Name: Wires
Specifications:
Material: Brass, Steel, Stainless Steel
Dimension: customized
Use: Electrical, Industrial
Quantity Required : MOQ
Shipping Terms : FOB/ Ex Works
Destination Port : Japan
Payment Terms : To be discussed with suppliers
Looking for suppliers from : Worldwide
Contact : Kawauchi
Buyer is interested to receive quotations for the following RFQ -
Product Name: GI Angles and GI Channels
Specification :-
Type :- Galvanized Equal Angles
Note: Need suppliers from China only
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Doha, Qatar
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Mr. Badur
The buyer would like to receive quotations for -
Product Name: Non-Alloy Steel Wires
Specifications:
Type: Non-Alloy Steel Wire- Nickel Plated (Nps ) 0.60 Mm Dia 277/kh-Kdvt/rd
Use: Lighting, Many
Color: White, Black
Quantity Required : 1 Twenty-Foot Container(sample)
Shipping Terms : FOB
Destination Port : Viet Nam
Payment Terms : To be discussed with suppliers
Looking for suppliers from : India, China
Contact : Grace
The buyer would like to receive quotations for -
Product Name: Binding Wires
Specifications :
Type: Constructional Binding Wire, Made By Straightened Cut Wire, Etc.
Material: Mild Steel
Size: Standard (Customized)
Use: Industrial
Packaging Terms : Standard
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Kuwait
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Husain
Please quote for the following wholesale product requirement -
Product Name: GI Wire
Specifications :
#16 & #18
Category: Electrical Wires
Quantity Required : 200 Metric Ton/Metric Tons
Shipping Terms : CIF
Destination Port : Manila Port, Philippines
Payment Terms : 100% L/C
Looking for suppliers from : Worldwide
Contact : Salem Almansouri
The buyer is interested to receive quotations for the following RFQ -
Product Name: Elevator Steel Wire Ropes
Specifications:
- Elavator 8*19s 12mm Wire Rope: 330 Meters
- 8*19s 6mm: 100 Meters
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Ho Chi Minh, Viet Nam
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Kim Son
Please quote for the following wholesale product requirement -
Product Name: Aluminium And Steel Wires
Specifications:
Use: For Welding
Quantity Required : 4 Twenty-Foot Container Monthly(sample)
Shipping Terms : CIF
Destination Port : Australia
Payment Terms : Bank Transfer
Looking for suppliers from : Philippines
Contact : Michael
Please quote for the following wholesale product requirement -
Product Name: GI Binding Wires
Packaging Terms : 10KG/Rolls
Quantity Required : 26 Metric Ton/Metric Tons(sample)
Shipping Terms : CIF
Destination Port : United Arab Emirates
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Faris Muhammed
The buyer is interested to receive quotations for the following RFQ -
Product Name: MIG Wires
Specifications:
Grade: 712 t
Diameter :1.2mm
Material: Copper & Copper Alloy
Quantity Required : 50 Ton/Tons
Shipping Terms : CIF
Destination Port : Sohar, Oman
Payment Terms : To be discussed with suppliers
Looking for suppliers from : India
Contact : Sajith
