Please quote for the following wholesale product requirement -
Product Name: Blockboards
Specifications:
3 layer panel product.
[material and dimensions]
The front and rear outer layers need to be 5mm thick solid cherry(American cherry), and the core is 9-12mm thick plywood(made in low hardness wood like poplar or spruce). So, the total thickness of the panel would be 19 - 22mm. For the width and length, they are 1220*1220mm.
We want both the front and rear cherry layers to be;
[cherry board grade]
- a premium grade with no knots or other imperfections
- straight grains most preferred, and curly grains to be avoided.
- surface to be sanded smooth.
[cherry board size and orientation]
- wide cherry boards to be used to have the minimum glue lines(8 cherry boards at most on each side of the panel, and fewer than 8 would be great).
- continous stave(no cherry boards are joined lengthwise)
- cherry boards are oriented in the same direction between the front and the rear of the panel.
[glue for cherry boards]
- polyurethane glue preferred, D4. If you have a better alternative, please advise. The dried glue needs to be less hard than the surrounding cherry wood.
- Please note that in our use of the panel, it can be in contact with water often, for hours each time.
- Surfaces to be glued need to be fully covered with glue, without missing any part resulting in dry joint, so that water does not penetrate in such a dry joint and split the joint.
- light tight between adjoining boards when glue is not applied yet(You cannot see light come through from the opposite side, meaning all board edges are very straight. Once the boards are glue joined, the glue line is almost invisible.)
Quantity : 20 foot container load for the initial purchase
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Sydney, Australia
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Steve Bae
Buyer is interested to receive quotations for the following RFQ -
Product Name: Wood Chipper
Specifications :
On Track Crawler
Type: Machine
Quantity Required : 2 Unit/Units
Shipping Terms : CIF
Destination Port : Italy
Payment Terms : L/C Or T/T
Looking for suppliers from : Worldwide
Contact : Salvatore Tortorelli
Buyer is interested to receive quotations for the following RFQ -
Product Name: Cherry Wood
Specifications:
Use : Interior
Quantity : MOQ
Quantity Required : MOQ
Shipping Terms : By Road
Destination Port : Philippines
Payment Terms : Bank Transfer
Looking for suppliers from : Philippines
Contact : Raymond Anthony Intervalo
Please quote for the following wholesale product requirement -
Product Name: Sawn Rosewood
Specifications:
Size : 55mm x 300mm x 14ft
Quantity : 500 cubic meter
Quantity Required : 500 Cubic Meter/Cubic Meters
Shipping Terms : CIF
Destination Port : Manilla, Philippines
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Justo Cabrera
Please provide a quotation to the following requirement from importer -
Product Name: Wood Chips
Specifications :
Wood Chips Should Be Of Deciduous Trees ( With Leaves)
Pine Or Trees Producing Resin Are Not Accepted
Chip Size To Be 1-8mm
Quantity Required : 500 Metric Ton/Metric Tons Monthly
Shipping Terms : CIF
Destination Port : Kuwait
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Fahim Amer
Please provide a quotation to the following requirement from importer -
Product Name: Red Meranti Wood
Specifications :
Sizes: 6×2. 8×2. Veriabl Length
Quantity Required : 1 Forty-Foot Container
Shipping Terms : CIF
Destination Port : Karachi Port, Pakistan
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Shaikh Jan
Wood Materials
Chain Saw, Wood Processing Machineries
Wood Materials
Woods
Wood
Wood
Merbau
Wooden Material
Wooden Materials
Wooden Raw Material
Wood
Wood Pellets
Wood Material
Wood Pellets
