Sugar, oil, diesel, petrol, apple, orange, banana, kiwi, etc.
The buyer is interested to receive quotations for the following RFQ -
Product Name: Air Compressor Pump Piston
Specifications:
- Compressor Head VP 0.5 / 0.8 type, piston air, two-cylinder with air filters and a flywheel. Productivity - 0.5 m3 / min, working pressure -0.8 kgf / cm2.
Quantity Required : 2 Unit/Units(sample)
Shipping Terms : CIF
Destination Port : Uzbekistan
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Shohruh Mardonov
Please provide a quotation to the following requirement from importer -
Product Name: Gas Compressor For A Gas Filling Station
Specifications:
gas compressor for a gas filling station.
Compressor unit SO-243 for gas filling station (OR ANALOGUE/ALTERNATIVE)
SECTION 2. SCOPE
The gas compressor must be used to drain liquefied petroleum gas from tank trucks / tank car into the tank and
pump gas from the tank to gas filling columns located in gas filling points.
SECTION 3 - OPERATING CONDITIONS
Subsection 3.1 General operating conditions
During operation, apply:
- Gas compressor in accordance with current regulations; Ambient temperature: - minus 10, + plus 55°
Subsection 3.2 Additional/special operating requirements
The operating mode of the gas compressor is continuous.
Service maintenance.
Warranty period: 12 months from the date of putting the equipment into operation.
Warranty obligations must cover all units and components of the supplied goods and, at the request of the
Customer, the replacement of the goods or the elimination of defects in the goods must be made within the time
agreed with the Customer and in accordance with the highest quality and safety standards.
SECTION 4. TECHNICAL REQUIREMENTS
Subsection 4.1 General technical requirements
Working environment - liquefied hydrocarbon gas in accordance with GOST 20448-90;
The device must be durable, sealed:
The body of the device should be manufactured in accordance with the current regulatory documents.
The following documentation must be attached to the
product • Operation manual in Russian or Uzbek;
• Certificate of conformity;
The technical characteristics of the supplied Compressor must be equal or superior in quality to the above
parameters.
And also the compressor must include, pressure gauges, a steel base (frame), a liquid separator according to
the standard. Provide flange accession of pipes . The requirements for the compressor must comply with the
requirements of the "Safety Rules in the Gas Industry of the Republic of Uzbekistan", approved by order of the
State Committee for Industrial Safety of the Republic of Uzbekistan "GOSKOMPROMBEZ" dated January 22,
2014. No. 13 (hereinafter - the Rules).
Subsection 4.2 Main technical, economic and operational indicators
The estimated service life is at least 10 years.
SECTION 13. REQUIREMENTS FOR THE QUANTITY, COMPOSITION, PLACE AND DATE
(FREQUENCY) OF DELIVERY
A gas compressor for LPG is subject to delivery, the total quantity is 1 set.
The completeness of the compressor is indicated in the technical documentation of the manufacturer (all
technical documentation is included in the delivery set).
Compressor SO-243-1 (SO-7V) is used when there is a need for compressed air in pneumatic systems ,
pneumatic equipment or pneumatic tools , during painting , painting, finishing works, in construction, in
production, mechanical engineering, industry and at home. It is perfect for working with paint sprayers,
spray guns and various pneumatic tools ( wrenches , balancers , pneumatic screwdrivers, pneumatic drills
, pneumatic saws , pneumatic machines, vibro- tampers , jackhammers, etc.) Compressor unit SO-243-1
(SO-7V) has a reliable and simple design. Ability to work both indoors and outdoors. Equipped with
wheels, which allows you to freely move the unit around the territory of enterprises, industrial zones ,
construction sites, etc.
Specifications
productivity, m 3 / hour 32
working pressure, kgf / cm 2 6
receiver volume, l 50
electric motor:
power, kWt four
voltage, V 380
N, rpm 2880
overall dimensions, mm
length (without handrail) 850X550X1000
weight, kg 132
Quantity Required : 1 Unit/Units
Shipping Terms : CIF
Destination Port : Uzbekistan
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Aleksandr Gafurov
Please quote for the following wholesale product requirement -
Product Name: Industry Chemicals
Specifications:
Used In Chemical Industry
Type: Solvesso 19 Tons
TBU 5 tons
TOP 0.3 ton
EAQ 6 tons
Dequest 2010 LC 2 tons
Qty:as above
Quantity Required : 32 Ton/Tons
Shipping Terms : Ex Works
Destination Port : Other-Not Shown
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Amir Afzal
Gas compressor for a gas filling station
Air Compressor Pump Piston
The buyer would like to receive quotations for -
Product Name: Gas Filter Element
Specifications:
Industrial Filtration Equipment
Part number: 10,0-254
Additional info: 3-240-7.0 258 70 70 245
Quantity : 15 Pec
Quantity Required : 15 Piece/Pieces
Shipping Terms : CIF
Destination Port : Uzbekistan
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Shahriyor Yuldashev
Please provide a quotation to the following requirement from importer -
Product Name: 12-Hydroxy Stearic Acid
Specifications:
industry use
Quantity: 17 tons
Quantity Required : 17 Ton/Tons
Shipping Terms : CIF
Destination Port : Tashkent, Uzbekistan
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : (Ms) Sanobar
Buyer is interested to receive quotations for the following RFQ -
Product Name: Aromatic Chemicals Like Odorant (Ethyl Mercaptan)
Specifications:
Use : Industrial
Qty : 343.5 tons
Quantity Required : 343.5 Ton/Tons
Shipping Terms : CIF
Destination Port : Uzbekistan
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Alisher Axmedov
14 liquid obm sbm viscosifier (pyra mod 595)
Gas filter element
Screw Compressor, Portable Diesel Driven Screw Air Compressor
Please provide a quotation to the following requirement from importer -
Product Name: SBP Special Boiling Point 100/140
Specifications:
Acticide MBS - it is a Synergetic Biocide For Wer State Protection Of Water Based Formaldehyde Sensitive Products
Use : Industrial
Qty : MOQ
Regular Requirement
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Uzbekistan
Payment Terms : Bank Transfer
Looking for suppliers from : China
Contact : Barotov Boburbek
Please quote for the following wholesale product requirement -
Product Name: Methylisothiazolinone CAS
Specifications:
CAS number:2682-20-4
CAS No. 2682-20-4
Usage : Chemical
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Uzbekistan
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Saidolim Mirzayev
Please quote for the following wholesale product requirement -
Product Name: Methylisothiazolinone CAS
Specifications:
CAS number:2682-20-4
CAS No. 2682-20-4
industrial grade
as per moq
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Uzbekistan, Uzbekistan
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Saidolim Mirzayev/ Hamza
Please quote for the following wholesale product requirement -
Product Name: Ammonium Nitrate
Specifications:
Low Density And Porous
Quantity : 1'20 feet conatiner
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Uzbekistan
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Doniyor Ismatov
Industrial Chemicals
Chemicals.
Low density ammonium nitrate, porous ammonium nitrate
Methylisothiazolinone cas
